Jump to content

There's nothing here yet

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mLipok
      This UDF was created to facilitate the saving and reading of email configuration.
      Thanks to @water, @jchd, @Jos for helping in translation of _EmailConfig_GUI_Preset_**()
      Hope to have _EmailConfig_GUI_Preset_ES() version soon.

      If you want to create your national version of _EmailConfig_GUI_Preset_**() please do not hesitate ... contribute.
      _EmailConfig_GUI_Preset_EN() is translated by me and Google Translator (from my national Polish language), so if you have any fix for this please do not hesitate ... contribute.
       
      The EmailConfig_Example_STMP_Mailer.au3   is using modified version of Jos SMTP Mailer UDF
       
      #AutoIt3Wrapper_UseX64=N #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel #include <Array.au3> #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <Crypt.au3> #include <EditConstants.au3> #include <File.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include "EmailConfig.au3" #include "GDPR.au3" ; https://www.autoitscript.com/forum/files/file/509-gdpr/ Global $oMyRet[2] #Region - EXAMPLE _MY_EXAMPLE__EmailConfig() Func _MY_EXAMPLE__EmailConfig() _GDPR_Crypter_Wrapper(_EmailConfig_ExampleCrypter) _EmailConfig_GUI_Preset_EN() ;~ _EmailConfig_GUI_Preset_DE() ;~ _EmailConfig_GUI_Preset_FR() ;~ _EmailConfig_GUI_Preset_NL() ;~ _EmailConfig_GUI_Preset_PL() _EmailConfig_SaveWrapper(_EmailConfig_SaveToINI) _EmailConfig_LoadWrapper(_EmailConfig_LoadFromINI) _EmailConfig_LoadWrapper() If $IDYES = MsgBox($MB_YESNO + $MB_TOPMOST + $MB_ICONQUESTION + $MB_DEFBUTTON1, 'Question #' & @ScriptLineNumber, _ 'Do you want to set email configuration ?') Then _EmailConfig_ShowGUI() EndIf Local $s_ToAddress = 'whereisyourdestination@your.email.com' Local $s_Subject = 'Testing email sending : ' & @YEAR & @MON & @MDAY & ' ' & @HOUR & @MIN & @SEC Local $s_Body = 'This is only a test' Local $s_Attachments = '' _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) EndFunc ;==>_MY_EXAMPLE__EmailConfig Func _EmailConfig_ExampleCrypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_EmailConfig_ExampleCrypter #EndRegion - EXAMPLE ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $oCOM_Error_Handler = ObjEvent("AutoIt.Error", "MyErrFunc") #forceref $oCOM_Error_Handler Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 #forceref $i_Error Local $i_Error_desciption = "" #forceref $i_Error_desciption If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ; Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ; Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail = "" EndFunc ;==>_INetSmtpMailCom Func _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) #Tidy_ILC_Pos=120 Local $aEMAIL_CONFIG = __EmailConfig__API() Local $SmtpServer = $aEMAIL_CONFIG[$EMAIL_CONFIG__22__SMTP_SERVER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address for the smtp-server to use - REQUIRED Local $FromName = $aEMAIL_CONFIG[$EMAIL_CONFIG__02__COMMON_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; name from who the email was sent Local $FromAddress = $aEMAIL_CONFIG[$EMAIL_CONFIG__03__EMAIL_ADDRESS][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address from where the mail should come Local $ToAddress = $s_ToAddress ; destination address of the email - REQUIRED Local $Subject = $s_Subject ; subject from the email - can be anything you want it to be Local $Body = $s_Body ; the messagebody from the mail - can be left blank but then you get a blank mail Local $AttachFiles = $s_Attachments ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $CcAddress = "" ; address for cc - leave blank if not needed Local $BccAddress = "" ; address for bcc - leave blank if not needed Local $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $Username = $aEMAIL_CONFIG[$EMAIL_CONFIG__20__SMTP_USER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; username for the account used from where the mail gets sent - REQUIRED Local $Password = $aEMAIL_CONFIG[$EMAIL_CONFIG__21__SMTP_PASSWORD][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; password for the account used from where the mail gets sent - REQUIRED Local $IPPort = $aEMAIL_CONFIG[$EMAIL_CONFIG__23__SMTP_PORT_NUMBER][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; port used for sending the mail ; in many country port 25 is not recomended, in such case use 587 instead Local $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS Local $tls = 0 ; enables/disables TLS when required ;~ Local $IPPort = 465 ; GMAIL port used for sending the mail ;~ Local $ssl = 1 ; GMAIL enables/disables secure socket layer sending - put to 1 if using httpS Local $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) If @error Then MsgBox(0, "Error sending email", "Error code: " & @error & @CRLF & "Description: " & $rc) EndIf EndFunc ;==>_SMTP_SendEmail_Example ; ; ; Com Error Handler Func MyErrFunc(ByRef $oMyError) Local $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1) ; something to check for when this function returns Return EndFunc ;==>MyErrFunc  

       
      EmailConfig.au3 EmailConfig_Example_STMP_Mailer.au3
    • By mLipok
      This is modest beginning for UDF Chilkat component:
      https://www.chilkatsoft.com/downloads_ActiveX.asp
      Some of AcitveX object bundled into this component (dll file) are Free (you can verify it here), some other are commercial.
      You can downolad this UDF here:
      ; #INDEX# ======================================================================== ; Title .........: Chilkat.au3 ; AutoIt Version : 3.3.10.2++ ; Language ......: English ; Description ...: A collection of Function for use with Chilkat component ; Author ........: mLipok ; Modified ......: ; URL ...........: https://www.chilkatsoft.com/refdoc/activex.asp ; URL ...........: https://www.chilkatsoft.com/downloads_ActiveX.asp ; Date ..........: 2017/02/01 ; Version .......: 0.1.1 BETA - Work in progress ; ================================================================================ #cs 2017/02/01 . First official version - mLipok #ce http://www.chilkatforum.com/questions/1306/is-the-chilkat-upload-component-freeware
       
      Examples:
       
      #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w 7 ;~ #AutoIt3Wrapper_Run_Debug_Mode=Y #Tidy_Parameters=/sort_funcs /reel #include <Array.au3> #include <StringConstants.au3> #include "Chilkat.au3" _Example() Func _Example() _ErrorLog_ChilkatWrapper(ConsoleWrite) _Chilkat_StartUp(@ScriptDir & '\ChilkatAx-9.5.0-win32.dll') _Chilkat_DllVersion($CHILKATOBJ_VERSION_950) Local $oGLOBAL = _Chilkat_GLOBAL_ObjCreate() If @error Then MsgBox($MB_ICONERROR, 'GLOBAL Declartion', '@error = ' & @error & @CRLF & '@extended = ' & @extended) _Chilkat_GLOBAL_UnlockBundle($oGLOBAL, "Anything for 30-day trial") If @error Then MsgBox($MB_ICONERROR, 'UnlockBundle', '@error = ' & @error & @CRLF & '@extended = ' & @extended) ; Just comment / uncomment one of this followin Examples functions: ;~ _Example_12_JsonObject_PrettyPrint() ;~ _Example_13_JsonObject_IterateMembers() ;~ _Example_14_JsonObject_CreateDocument() ;~ _Example_15_CSV_ColumnNames() ;~ _Example_16_CSV_ToArray() _Example_17_CSV_ToArray('(?i).*?Pierwszy.*?Urz.*?Skarb.*?', '(?i).*Katowice.*?') EndFunc ;==>_Example Func _Example_12_JsonObject_PrettyPrint() _Log_ChilkatExample('_Example_12_JsonObject_PrettyPrint') ; https://www.example-code.com/vbscript/json_pretty_print.asp Local $oJSON = _Chilkat_JSON_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) Local $sJSON_String = "{""name"": ""donut"",""image"":{""fname"": ""donut.jpg"",""w"": 200,""h"": 200},""thumbnail"":{""fname"": ""donutThumb.jpg"",""w"": 32,""h"": 32}}" Local $iSuccess = $oJSON.Load($sJSON_String) If ($iSuccess <> 1) Then ConsoleWrite($oJSON.LastErrorText & @CRLF) Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) EndIf ; To pretty-print, set the EmitCompact property equal to 0 $oJSON.EmitCompact = 0 ; If bare-LF line endings are desired, turn off EmitCrLf ; Otherwise CRLF line endings are emitted. $oJSON.EmitCrLf = 0 ; Emit the formatted JSON: ConsoleWrite($oJSON.Emit() & @CRLF) EndFunc ;==>_Example_12_JsonObject_PrettyPrint Func _Example_13_JsonObject_IterateMembers() _Log_ChilkatExample('_Example_13_JsonObject_IterateMembers') ; https://www.example-code.com/vbscript/json_iterate_members.asp Local $oJSON = _Chilkat_JSON_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) Local $sJSON_String = "{ ""id"": 1, ""name"": ""A green door"", ""tags"": [""home"", ""green""], ""price"": 125 }" Local $iSuccess = $oJSON.Load($sJSON_String) If ($iSuccess <> 1) Then ConsoleWrite($oJSON.LastErrorText & @CRLF) Return SetError($CHILKAT_ERR_LOAD, @extended, $CHILKAT_RET_FAILURE) EndIf Local $sName = '', $sValue = '' Local $iNumMembers = $oJSON.Size, $iValue = 0 For $iMember_idx = 0 To $iNumMembers - 1 $sName = $oJSON.NameAt($iMember_idx) $sValue = $oJSON.StringAt($iMember_idx) ConsoleWrite($sName & ": " & $sValue & @CRLF) $iValue = $oJSON.IntAt($iMember_idx) ConsoleWrite($sName & " as integer: " & $iValue & @CRLF) Next EndFunc ;==>_Example_13_JsonObject_IterateMembers Func _Example_14_JsonObject_CreateDocument() _Log_ChilkatExample('_Example_14_JsonObject_CreateDocument') ; https://www.example-code.com/vbscript/create_json.asp Local $oJSON = _Chilkat_JSON_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) Local $iSuccess $iSuccess = $oJSON.AddStringAt(-1, "Title", "Pan's Labyrinth") ConsoleWrite("- $iSuccess=" & $iSuccess & @CRLF) $iSuccess = $oJSON.AddStringAt(-1, "Director", "Guillermo del Toro") ConsoleWrite("- $iSuccess=" & $iSuccess & @CRLF) $iSuccess = $oJSON.AddStringAt(-1, "Original_Title", "El laberinto del fauno") ConsoleWrite("- $iSuccess=" & $iSuccess & @CRLF) $iSuccess = $oJSON.AddIntAt(-1, "Year_Released", 2006) ConsoleWrite("- $iSuccess=" & $iSuccess & @CRLF) $oJSON.EmitCompact = 0 ConsoleWrite($oJSON.Emit() & @CRLF) EndFunc ;==>_Example_14_JsonObject_CreateDocument Func _Example_15_CSV_ColumnNames() _Log_ChilkatExample('_Example_15_CSV_ColumnNames') ; https://www.example-code.com/vbscript/csv_columnNames.asp Local $sURL = 'http://www.chilkatsoft.com/testData/sample.csv' InetGet($sURL, @ScriptDir & '\sample.csv') Local $oCSV = _Chilkat_CSV_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) ; Prior to loading the CSV file, indicate that the 1st row ; should be treated as column names: $oCSV.HasColumnNames = 1 ; Load the $oCSV records from the file: Local $iSuccess = $oCSV.LoadFile(@ScriptDir & "\sample.csv") If ($iSuccess <> 1) Then ConsoleWrite($oCSV.LastErrorText & @CRLF) Return SetError($CHILKAT_ERR_LOADFILE, @extended, $CHILKAT_RET_FAILURE) EndIf Local $iIndex = 0 Local $sColName = '' ; Display the column names: For $iCol_idx = 0 To $oCSV.NumColumns - 1 $sColName = $oCSV.GetColumnName($iCol_idx) ConsoleWrite($iCol_idx & ": " & $sColName & @CRLF) ; The following line demonstrates to to get the column ; index given a column name: $iIndex = $oCSV.GetIndex($sColName) ConsoleWrite($sColName & " is at column index " & $iIndex & @CRLF) Next EndFunc ;==>_Example_15_CSV_ColumnNames Func _Example_16_CSV_ToArray() _Log_ChilkatExample('_Example_16_CSV_ToArray') Local $sURL = 'http://www.chilkatsoft.com/testData/sample.csv' InetGet($sURL, @ScriptDir & '\sample.csv') Local $oCSV = _Chilkat_CSV_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) ; Prior to loading the CSV file, indicate that the 1st row ; should be treated as column names: $oCSV.HasColumnNames = 1 ; Load the $oCSV records from the file: Local $iSuccess = $oCSV.LoadFile(@ScriptDir & "\sample.csv") If ($iSuccess <> 1) Then ConsoleWrite($oCSV.LastErrorText & @CRLF) Return SetError($CHILKAT_ERR_LOADFILE, @extended, $CHILKAT_RET_FAILURE) EndIf Local $iNumColumns = $oCSV.NumColumns Local $iNumRows = $oCSV.NumRows Local $aResult[$iNumRows + 1][$iNumColumns] ; First get the column names For $iCol_idx = 0 To $iNumColumns - 1 $aResult[0][$iCol_idx] = $oCSV.GetColumnName($iCol_idx) Next For $iRow_idx = 0 To $iNumRows - 1 For $iCol_idx = 0 To $iNumColumns - 1 $aResult[$iRow_idx + 1][$iCol_idx] = $oCSV.GetCell($iRow_idx, $iCol_idx) Next Next _ArrayDisplay($aResult, '$aResult') EndFunc ;==>_Example_16_CSV_ToArray Func _Example_17_CSV_ToArray($sName_RegExpPattern, $sCity_RegExpPattern) _Log_ChilkatExample('_Example_16_CSV_ToArray') ; https://www.example-code.com/vbscript/csv_columnNames.asp Local $sURL = 'https://epuap.gov.pl/wps/wcm/connect/61e062b9-d981-4526-9f63-c2569263775a/RESP_2016-10-07.csv?MOD=AJPERES' InetGet($sURL, @ScriptDir & '\ePUAP.csv') ConsoleWrite("- Download completed" & @CRLF) Local $oCSV = _Chilkat_CSV_ObjCreate() If @error Then Return SetError(@error, @extended, $CHILKAT_RET_FAILURE) ; Prior to loading the CSV file, indicate that the 1st row ; should be treated as column names: $oCSV.HasColumnNames = 1 ; Load the $oCSV records from the file: Local $sCSVContent = FileRead(@ScriptDir & "\ePUAP.csv") ConsoleWrite("- Load File completed" & @CRLF) Local $iSuccess = $oCSV.LoadFromString($sCSVContent) If ($iSuccess <> 1) Then ConsoleWrite($oCSV.LastErrorText & @CRLF) Return SetError($CHILKAT_ERR_LOADFILE, @extended, $CHILKAT_RET_FAILURE) EndIf ConsoleWrite("- LoadFromString completed" & @CRLF) Local $iNumColumns = $oCSV.NumColumns Local $iNumRows = $oCSV.NumRows Local $aResult[$iNumRows + 1][$iNumColumns] ; First get the column names For $iCol_idx = 0 To $iNumColumns - 1 $aResult[0][$iCol_idx] = $oCSV.GetColumnName($iCol_idx) Next Local $iResult_RowCount = 1 ; First is ColumnName For $iRow_idx = 0 To $iNumRows - 1 If _ StringRegExp($oCSV.GetCell($iRow_idx, 0), $sName_RegExpPattern, $STR_REGEXPMATCH) _ And _ StringRegExp($oCSV.GetCell($iRow_idx, 4), $sCity_RegExpPattern, $STR_REGEXPMATCH) _ Then For $iCol_idx = 0 To $iNumColumns - 1 $aResult[$iResult_RowCount][$iCol_idx] = $oCSV.GetCell($iRow_idx, $iCol_idx) Next $iResult_RowCount += 1 EndIf Next ; strip array size to Number of founds rows ReDim $aResult[$iResult_RowCount][$iNumColumns] ConsoleWrite("- Parsing completed" & @CRLF) _ArrayDisplay($aResult, '$aResult') EndFunc ;==>_Example_17_CSV_ToArray Func _Log_ChilkatExample($sData) ConsoleWrite('>+ ' & $sData & @CRLF) EndFunc ;==>_Log_ChilkatExample  
      REMARK:
      This UDF is a continuation of this thread:
       
    • By mLipok
      Here I found a usefull UDF for POP3.
      I modified this UDF.
      You can download it from download section.


      Below you see old description:
       
    • By mLipok
      Today, in the end as well, worked out using the Acrobat Reader ActiveX COM Object "AcroPDF.PDF.1"
      #include-once #include <Constants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Misc.au3> #include <MenuConstants.au3> #include <WinAPI.au3> ;~ Thanks to BrewManNH ;~ http://www.autoitscript.com/forum/topic/134878-guiregistermsg-replacement-for-guictrlsetonevent-and-guigetmsg/ ;~ Thanks to mikell ;~ http://www.autoitscript.com/forum/topic/161985-how-to-close-gui-with-guiregistermsg/ ; Install a custom error handler Global $oMyError = ObjEvent("AutoIt.Error", "_ComErrFunc") Global $__hExampleGUI Global $__idOPEN Global $_fExit Global $__hACROBAT_GUI = '' Global $__idACROBAT_GUI_CTRL_AX = '' Global $__oACROBAT_READER = '' #include <GUIConstantsEx.au3> ;~ GUIRegisterMsg($WM_ERASEBKGND, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_PAINT, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_ACTIVATE, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_CAPTURECHANGED, "_WM_EXTRACTOR") ;~ GUIRegisterMsg($WM_DEVICECHANGE, "_WM_EXTRACTOR") GUIRegisterMsg($WM_EXITSIZEMOVE, "_WM_EXTRACTOR") GUIRegisterMsg($WM_COMMAND, "_WM_EXTRACTOR") GUIRegisterMsg($WM_SYSCOMMAND, "_WM_EXTRACTOR") GUIRegisterMsg($WM_HSCROLL, "_WM_EXTRACTOR") _ExampleProgram_Gui() While 1 Sleep(10) If $_fExit Then _ACROBAT_GUI_DELETE() DeleteGui() Exit EndIf WEnd Func DeleteGui() GUIDelete($__hExampleGUI) EndFunc ;==>DeleteGui Func _ExampleProgram_Gui() ; Create a GUI with various controls. $__hExampleGUI = GUICreate("Example") $__idOPEN = GUICtrlCreateButton("&Open", 310, 370, 85, 25) ; Display the GUI. GUISetState(@SW_SHOW, $__hExampleGUI) EndFunc ;==>_ExampleProgram_Gui #Region ACROBAT FUNCTION Func _AcrobatInit() $__oACROBAT_READER = ObjCreate("AcroPDF.PDF.1"); Return $__oACROBAT_READER.GetVersions EndFunc ;==>_AcrobatInit Func _Acrobat_Events(ByRef $aMSG) If $aMSG[1] = $__hACROBAT_GUI Then Switch $aMSG[0] Case $GUI_EVENT_CLOSE _ACROBAT_GUI_DELETE() EndSwitch EndIf EndFunc ;==>_Acrobat_Events Func _ACROBAT_Destroy() $__oACROBAT_READER = "" ;~ MsgBox(1,'test','destroyed') EndFunc ;==>_ACROBAT_Destroy Func _AcrobatShow($sFile, $sTitle = "PDF ", $iLeft = 50, $iTop = 0, $iWidth = 1000, $iHeight = 700) If FileExists($sFile) Then _AcrobatInit() ; Set option $__oACROBAT_READER.src = $sFile $__oACROBAT_READER.SetLayoutMode(4) $__oACROBAT_READER.SetPageMode(1) $__oACROBAT_READER.SetShowToolbar(0) $__oACROBAT_READER.SetView(1) ; Create GUI $__hACROBAT_GUI = GUICreate($sTitle, $iWidth, $iHeight, $iLeft, $iTop, BitOR($GUI_SS_DEFAULT_GUI, $WS_SIZEBOX, $WS_MAXIMIZEBOX)) $__idACROBAT_GUI_CTRL_AX = GUICtrlCreateObj($__oACROBAT_READER, 5, 5, $iWidth - 20, $iHeight - 10) GUICtrlSetStyle($__idACROBAT_GUI_CTRL_AX, $WS_VISIBLE) GUISetState() EndIf EndFunc ;==>_AcrobatShow Func _ACROBAT_Refresh() If IsObj($__oACROBAT_READER) Then Local $hPreviouslyGui = GUISwitch($__hACROBAT_GUI) GUISetState(@SW_LOCK) Local $iGUI_PDFWidth = WinGetPos($__hACROBAT_GUI)[2] - 20 Local $iGUI_PDFHeight = WinGetPos($__hACROBAT_GUI)[3] - 40 Local $sFile = $__oACROBAT_READER.src ; this below line do not works with Acro Reader ; Local $iCurrentPage = $__oACROBAT_READER.GetNumber Local $iCurrentPage = 0 _ACROBAT_Destroy() GUICtrlDelete($__idACROBAT_GUI_CTRL_AX) _AcrobatInit() $__idACROBAT_GUI_CTRL_AX = GUICtrlCreateObj($__oACROBAT_READER, 5, 5, $iGUI_PDFWidth, $iGUI_PDFHeight) $__oACROBAT_READER.src = $sFile ;~ $__oACROBAT_READER.SetCurrentPage($iCurrentPage) GUISetState(@SW_UNLOCK) GUISwitch($hPreviouslyGui) EndIf EndFunc ;==>_ACROBAT_Refresh Func _ACROBAT_GUI_DELETE() _ACROBAT_Destroy() if IsHWnd($__hACROBAT_GUI) then GUIDelete($__hACROBAT_GUI) EndFunc ;==>_ACROBAT_GUI_DELETE #EndRegion ACROBAT FUNCTION #Region MSG and ERROR HANDLER Func _WM_EXTRACTOR($hWnd, $iMsg, $wParam, $lParam) ;~ ConsoleWrite('! $hWnd = ' & $hWnd & ' $iMsg = ' & $iMsg & '('&HEX($iMsg)&')'& ' $wParam = ' & $wParam & ' $lParam = ' & $lParam & @CRLF) If $hWnd = ControlGetHandle($__hACROBAT_GUI, '', $__idACROBAT_GUI_CTRL_AX) Then ConsoleWrite('! -------------- $hWnd = ' & $hWnd & ' $iMsg = ' & $iMsg & '(' & Hex($iMsg) & ')' & ' $wParam = ' & $wParam & ' $lParam = ' & $lParam & @CRLF) EndIf If $hWnd = $__hACROBAT_GUI Then Switch $iMsg Case $WM_COMMAND #cs Case $WM_ACTIVATE Local $test = BitAND($wParam, 0x00000004) if $test <> 0 then MsgBox(1,'$WM_ACTIVATE','test') _ACROBAT_Refresh() EndIf Case $WM_ERASEBKGND WinGetHandle("[ACTIVE]") if $__hACROBAT_GUI <> _WinAPI_GetWindow ( $__hACROBAT_GUI, $GW_HWNDPREV ) then ConsoleWrite('! Case $WM_ERASEBKGND' & @CRLF) _ACROBAT_Refresh() _WinAPI_RedrawWindow($__hACROBAT_GUI,0,0,$RDW_NOERASE) EndIf Case $WM_PAINT _WinAPI_RedrawWindow($__hACROBAT_GUI,0,0,$RDW_NOERASE) Case $WM_CAPTURECHANGED _ACROBAT_Refresh() Case $WM_DEVICECHANGE _ACROBAT_Refresh() #ce Case $WM_EXITSIZEMOVE _ACROBAT_Refresh() Case $WM_SYSCOMMAND ;~ Local $test = BitAND($wParam, 0xFFF0) Local $test = BitAND($wParam, 0x0000FFFF) Switch $test Case $SC_CLOSE _ACROBAT_GUI_DELETE() Case $SC_CONTEXTHELP Case $SC_DEFAULT Case $SC_HOTKEY Case $SC_HSCROLL Case $SC_KEYMENU Case $SC_MAXIMIZE _ACROBAT_Refresh() Case $SC_MINIMIZE Case $SC_MONITORPOWER Case $SC_MOUSEMENU Case $SC_MOVE ;~ _ACROBAT_Refresh() Case $SC_NEXTWINDOW ;~ _ACROBAT_Refresh() Case $SC_PREVWINDOW ;~ _ACROBAT_Refresh() Case $SC_RESTORE _ACROBAT_Refresh() Case $SC_SCREENSAVE Case $SC_SIZE Case $SC_TASKLIST Case $SC_VSCROLL EndSwitch EndSwitch EndIf If $hWnd = $__hExampleGUI Then Switch $iMsg Case $WM_COMMAND Local $nID = BitAND($wParam, 0x0000FFFF) Local $hCtrl = $lParam Switch $nID Case $__idOPEN if not IsObj($__oACROBAT_READER) then _AcrobatShow(FileOpenDialog("Choose PDF", "C:\Temp", "PDF Files(*.pdf)", 3)) ; put your own start folder here) EndIf EndSwitch Case $WM_SYSCOMMAND Local $test = BitAND($wParam, 0xFFF0) Switch $test Case $SC_CLOSE $_fExit = True Case $SC_CONTEXTHELP Case $SC_DEFAULT Case $SC_HOTKEY Case $SC_HSCROLL Case $SC_KEYMENU Case $SC_MAXIMIZE Case $SC_MINIMIZE Case $SC_MONITORPOWER Case $SC_MOUSEMENU Case $SC_MOVE Case $SC_NEXTWINDOW Case $SC_PREVWINDOW Case $SC_RESTORE Case $SC_SCREENSAVE Case $SC_SIZE Case $SC_TASKLIST Case $SC_VSCROLL EndSwitch EndSwitch EndIf Return $GUI_RUNDEFMSG EndFunc ;==>_WM_EXTRACTOR Func _ComErrFunc() Local $HexNumber = Hex($oMyError.number, 8) MsgBox(0, "AutoItCOM Test", _ "We intercepted a COM Error !" & @CRLF & @CRLF & _ "err.description is: " & @TAB & $oMyError.description & @CRLF & _ "err.windescription:" & @TAB & $oMyError.windescription & @CRLF & _ "err.number is: " & @TAB & $HexNumber & @CRLF & _ "err.lastdllerror is: " & @TAB & $oMyError.lastdllerror & @CRLF & _ "err.scriptline is: " & @TAB & $oMyError.scriptline & @CRLF & _ "err.source is: " & @TAB & $oMyError.source & @CRLF & _ "err.helpfile is: " & @TAB & $oMyError.helpfile & @CRLF & _ "err.helpcontext is: " & @TAB & $oMyError.helpcontext _ ) SetError(1) EndFunc ;==>_ComErrFunc #EndRegion MSG and ERROR HANDLER Any comments are welcome.
      Cheers
      mLipok
    • By t0nZ
      Today I want to share this little project made to check and  notify the expiration of domain users password, in a Microsoft domain.
      Briefly, the script check users domain password expiration and takes actions.
      The script can work on multiple domain groups, taking different actions for every group, there is an .ini file with some options.
      Groups to be checked are defined in the .ini, and the groups must contain only users no other groups.
      The list of users of every group is obtained and if the password expiration in (remaining) days is matched (two possibilities) an email is sent.
      It can be a mail sent directly to the user (ini file : tomail=user) or it can be a mail sent to only one address (ini file : tomail=the@mail.it) (like domain admins...) and in this case the mail contains a report with the users approaching expiration.
      An operation log is always generated.
      In the ini (also the posted one) you can set to have no mail sent (for testing) and/or to have a GUI, but also the GUI is intended only for test, this script is scheduled on a server not logged in, so normally no GUI .
      Update 2018/03/16 : added switch to reset the password expiration, useful if you have for example an user (or 500) with psw expiration withing 3 days and you want to restore expiration within 90 days WITHOUT changing password.
      Used the way as advised by Microsoft  (see the link), but with sth AD.au3 , the fantastic Active Directory UDF
      # First change the pwdlastset to 0 because Microsoft wants it this way $todouser.pwdLastSet = 0 Set-ADUser -Instance $todouser # Change the pwdlastset to the current date/time of the associate DC $todouser.pwdLastSet = -1 Set-ADUser -Instance $todouser Why you should act this way ? Big companies have strange policies listen to me ...
      The code:
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=Icone\Faenza\117.ico #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ; PEG ; Password Expiration Guardian ; (C) NSC 2018 ; check user domain password expiration and takes actions ; the script can work on multiple domain groups, taking differente actions for every group. ; the groups must contains only users no other groups ; the list of users of every group is obtained and if the password expiration in day is matched (two possibilities) an email is sent. ; It can be a mail sent directly to the user (ini file : tomail=user) ; or it can be a mail sent to only one address (ini file : tomail=the@mail.it) ; and in this case the mail contains a report with the users approaching expiration ; V.0.5 check based on one domain group ; V.1.0 ini file and check based on multiple domain groups ; V.1.5 ini file with general section to activate "test" GUI, and to enable disable mail send ; V.1.6 march 2018 italian "home made" translation of days and months in date ; V.1.7 added flag pwdLastSet to reset pass expiration - intended to use like a one time on/off switch to reset psw expiration #include <AD.au3> #include <File.au3> #include <GuiEdit.au3> #include <_zip.au3> #include <Date.au3> #include <Inet.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Debug.au3> Global $appname = "PEG", $appver = "V.1.7" Global $inifile = @ScriptDir & "\" & $appname & ".ini" Global $geleft = 5, $getop = 5, $gewidth = 790, $geheight = 540 Global $gollogcount = 0, $lastlog = "sicrlf", $cachelog = "", $guititle = "PEG " & $appver, $Gollogedit, $logfile = @ScriptDir & "\" & $appname & "_LOG_", $months2NOTzip = 3 Global $INIgroup, $INItomail, $INImailsubject, $INIsmpt, $INIfromname, $INIfromaddress, $INIdays1, $INIdays2, $INItosend, $arrayINIsections, $guiactive, $flagITA, $flagpwdLastSet ; START program GOLLOG(">>>>>> " & $appname & " " & $appver & " START >>>>>>") CFGctrl() If $guiactive = 1 Then GUI() $groupnumber = 0 While $groupnumber < $arrayINIsections[0] $groupnumber += 1 If $arrayINIsections[$groupnumber] <> "general" Then CFGload($arrayINIsections[$groupnumber]) loaduserS() EndIf WEnd If $guiactive = 1 Then While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE GOLLOG("<<<< STOP <<<<") Exit EndSwitch WEnd EndIf GOLLOG("<<<<<< PEG STOP <<<<<<<") Exit ;STOP program Func GUI() GUICreate($guititle, 800, 560, 100, 200, -1) GUISetBkColor(0x693F54) ; will change background color $Gollogedit = GUICtrlCreateEdit("", $geleft, $getop, $gewidth, $geheight, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_BORDER, $WS_VSCROLL)) GUICtrlSetBkColor(-1, 0xC7BBC1) GUICtrlSetData(-1, "" & @CRLF) GUICtrlSetFont(-1, 9, 800, 0, "consolas") GUICtrlSetColor(-1, 0x090608) GUISetState(@SW_SHOW) GOLLOG("PEG " & $appver & " gui STARTED") EndFunc ;==>GUI Func loaduserS() GOLLOG("workin on group: " & $INIgroup) Local $Nscad = 0 Dim $report[1] = ["Report:"] Local $singlereport = "" Local $usermail = "" Local $username = "" Local $datediff = "" Local $arrayuserpsw Local $iErr _AD_Open() $search1 = _AD_GetGroupMembers($INIgroup) ;$search1 = _AD_RecursiveGetGroupMembers($INIgroup); testing recursive .. in the future maybe If @error = 0 Then Local $conta1 = 0 While $search1[0] > $conta1 $conta1 += 1 $arrayuserpsw = _AD_GetPasswordInfo($search1[$conta1]) $datediff = _DateDiff("D", _NowCalc(), $arrayuserpsw[9]) GOLLOG("USER: " & $search1[$conta1]) GOLLOG("Password expires on: " & $arrayuserpsw[9] & " in " & $datediff & " days") If $datediff = $INIdays1 Or $datediff = $INIdays2 Then GOLLOG("expiration match !") If $INItomail = "user" Then ; this IF is relative to .ini file parameter TOSEND $usermail = _AD_GetObjectAttribute($search1[$conta1], "mail") GOLLOG("sending mail to: " & $usermail) If $flagITA = 1 Then $dataITA = dataITA($arrayuserpsw[9]) Else $dataITA = _DateTimeFormat($arrayuserpsw[9], 1) EndIf Dim $report[1] = ["La tua password scadra' " & $dataITA & ", entro " & $datediff & " giorni."] _ArrayAdd($report, "Modificala per tempo !") If $INItosend = 0 Then GOLLOG("Not sent mail " & $Nscad & ": ") GOLLOG("from :" & $INIfromname & " | " & $INIfromaddress) GOLLOG("to :" & $usermail & " | subject: " & $INImailsubject) Local $reporttext = _ArrayToString($report) GOLLOG("text :" & $reporttext) Else Local $iResponse = _INetSmtpMail($INIsmpt, $INIfromname, $INIfromaddress, $usermail, $INImailsubject, $report, "EHLO " & @ComputerName, "-1") ; perla pearl mail send HS smtp (ehlo required) $iErr = @error If $iResponse = 1 Then GOLLOG("Success! " & "Mail to user sent") Else GOLLOG("Error! " & "Mail failed with error code " & $iErr) EndIf EndIf Else $username = _AD_GetObjectAttribute($search1[$conta1], "displayname") _ArrayAdd($report, "USER: " & $username) _ArrayAdd($report, "Password expires on: " & $arrayuserpsw[9] & " in " & $datediff & " days") $Nscad += 1 If $flagpwdLastSet = 1 Then ; warning : auto pass set GOLLOG("Re-set password expiration for " & $search1[$conta1]) If _AD_ModifyAttribute($search1[$conta1], "pwdLastSet", "0") Then GOLLOG("pwdLastSet to 0 - OK") Else GOLLOG("pwdLastSet to 0 - ERROR " & @error) EndIf If _AD_ModifyAttribute($search1[$conta1], "pwdLastSet", "-1") Then GOLLOG("pwdLastSet to -1 - OK") Else GOLLOG("pwdLastSet to -1 - ERROR " & @error) EndIf EndIf EndIf EndIf WEnd If $Nscad > 0 And $INItomail <> "user" Then _ArrayAdd($report, $Nscad & " user passwords near expiration") If $INItosend = 0 Then GOLLOG("Not sent mail " & $Nscad & ": ") GOLLOG("from :" & $INIfromname & " | " & $INIfromaddress) GOLLOG("to :" & $INItomail & " | subject: " & $INImailsubject) Local $reporttext = _ArrayToString($report) GOLLOG("text :" & $reporttext) Else Local $iResponse = _INetSmtpMail($INIsmpt, $INIfromname, $INIfromaddress, $INItomail, $INImailsubject, $report, "EHLO " & @ComputerName, "-1") ; perla pearl mail send HS smtp (ehlo required) Local $iErr = @error If $iResponse = 1 Then GOLLOG("Success! " & "Mail sent") Else GOLLOG("Error! " & "Mail failed with error code " & $iErr) EndIf EndIf EndIf GOLLOG("checked n° " & $conta1 & " users") Else GOLLOG("error in user search " & @error) EndIf _AD_Close() EndFunc ;==>loaduserS Func dataITA($inputdate) ; Input date in the format "YYYY/MM/DD[ HH:MM:SS]", and translates Tuesday 8 May 2018 -> Martedì 8 maggio 2018 - perla pearl Local $stringaDATAita = _DateTimeFormat($inputdate, 1) Select Case StringInStr($stringaDATAita, "Monday") $stringaDATAita = StringReplace($stringaDATAita, "Monday", "lunedi'") Case StringInStr($stringaDATAita, "Tuesday") $stringaDATAita = StringReplace($stringaDATAita, "Tuesday", "martedi'") Case StringInStr($stringaDATAita, "Wednesday") $stringaDATAita = StringReplace($stringaDATAita, "Wednesday", "mercoledi'") Case StringInStr($stringaDATAita, "Thursday") $stringaDATAita = StringReplace($stringaDATAita, "Thursday", "giovedi'") Case StringInStr($stringaDATAita, "Friday") $stringaDATAita = StringReplace($stringaDATAita, "Friday", "venerdi'") Case StringInStr($stringaDATAita, "Saturday") $stringaDATAita = StringReplace($stringaDATAita, "Saturday", "sabato") Case StringInStr($stringaDATAita, "Sunday") $stringaDATAita = StringReplace($stringaDATAita, "Sunday", "Domenica") EndSelect Select Case StringInStr($stringaDATAita, "January") $stringaDATAita = StringReplace($stringaDATAita, "January", "gennaio") Case StringInStr($stringaDATAita, "February") $stringaDATAita = StringReplace($stringaDATAita, "February", "febbraio") Case StringInStr($stringaDATAita, "March") $stringaDATAita = StringReplace($stringaDATAita, "March", "marzo") Case StringInStr($stringaDATAita, "April") $stringaDATAita = StringReplace($stringaDATAita, "April", "aprile") Case StringInStr($stringaDATAita, "May") $stringaDATAita = StringReplace($stringaDATAita, "May", "maggio") Case StringInStr($stringaDATAita, "June") $stringaDATAita = StringReplace($stringaDATAita, "June", "giugno") Case StringInStr($stringaDATAita, "July") $stringaDATAita = StringReplace($stringaDATAita, "July", "luglio") Case StringInStr($stringaDATAita, "August") $stringaDATAita = StringReplace($stringaDATAita, "August", "agosto") Case StringInStr($stringaDATAita, "September") $stringaDATAita = StringReplace($stringaDATAita, "September", "settembre") Case StringInStr($stringaDATAita, "October") $stringaDATAita = StringReplace($stringaDATAita, "October", "ottobre") Case StringInStr($stringaDATAita, "November") $stringaDATAita = StringReplace($stringaDATAita, "November", "novembre") Case StringInStr($stringaDATAita, "December") $stringaDATAita = StringReplace($stringaDATAita, "December", "dicembre") EndSelect Return ($stringaDATAita) EndFunc ;==>dataITA Func GOLLOG($logtext) ; Gollog V.2.3 gestione CRLF si o no ; gestione a capo automatico oltre i xx caratteri; gestione pulitura ogni totmila char Perla pearl ; basta aggiungere |nocrlf50 a fine stringa, dove 50 sono gli xx caratteri, conta la prima riga dove si supera quel limite. ; to declare $gollogcount = 0,$lastlog="sicrlf",$cachelog="",$guititle = "nomegui",$Gollogedit,$logfile = @ScriptDir & "\GOLLOG_LOG_", $months2NOTzip = 3 ; e anche le misure dell'edit: $geleft = 32, $getop = 32, $gewidth = 553, $geheight = 377 ; #include <File.au3> #include <GuiEdit.au3> #include <_zip.au3> ; to insert FUNCs: GOLLOG CLEANEDIT GOLzipZIP $gollogcount += StringLen($logtext) ;Local $logfile = @ScriptDir & "\GOLLOG_LOG_" ; now global Local $logfiletimerange = @YEAR & @MON Local $linelimit = StringRight($logtext, 2) If StringRight($logtext, 9) = "|nocrlf" & $linelimit Then $logtext = StringTrimRight($logtext, 9) Local $acapo = "no" Else Local $acapo = "si" $gollogcount += 4 If $gollogcount > 13000 Then Sleep(3000) cleanedit() ; MsgBox(64, "debug", $conta) $gollogcount = 0 EndIf EndIf If $acapo = "no" And (StringLen($cachelog) <= $linelimit) Then ;pearl perla non a capo se If $lastlog = "nocrlf" Then If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, $logtext) EndIf Else If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, @MDAY & "/" & @MON & "_" & @HOUR & ":" & @MIN & " " & $logtext) EndIf EndIf $cachelog = $cachelog & $logtext $lastlog = "nocrlf" Else If $lastlog = "nocrlf" Then If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, $logtext & @CRLF) EndIf $cachelog = $cachelog & $logtext _FileWriteLog($logfile & $logfiletimerange & ".txt", $cachelog) $cachelog = "" Else If WinExists($guititle) Then ; per non scrivere in gui se questa non esiste _GUICtrlEdit_AppendText($Gollogedit, @MDAY & "/" & @MON & "_" & @HOUR & ":" & @MIN & " " & $logtext & @CRLF) EndIf _FileWriteLog($logfile & $logfiletimerange & ".txt", $logtext) EndIf $lastlog = "sicrlf" EndIf EndFunc ;==>GOLLOG Func cleanedit() ; cleaning of edit every n° lines (in program put if $nlines > xlines then this function) GUICtrlDelete($Gollogedit) $Gollogedit = GUICtrlCreateEdit("", $geleft, $getop, $gewidth, $geheight) ;, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_WANTRETURN, $WS_BORDER)) GUICtrlSetData(-1, "" & @CRLF) GUICtrlSetFont(-1, 9, 800, 0, "consolas") GUICtrlSetColor(-1, 0090608) GUICtrlSetBkColor(-1, 0xF0DAE5) GUICtrlSetCursor(-1, 3) EndFunc ;==>cleanedit Func GOLzipLOG($months2NOTzip) ; zipping old log leaving unzipped only n months GOLLOG("Starting old logs zipping..") ; path extraction zone Local $logfiletimerange = @YEAR & @MON Local $sDrive = "", $sDir = "", $sFileName = "", $sExtension = "" Local $arraylogpath = _PathSplit($logfile & $logfiletimerange & ".txt", $sDrive, $sDir, $sFileName, $sExtension) Local $logpath = $arraylogpath[1] & $arraylogpath[2] Local $hSearch = FileFindFirstFile($logfile & "*.txt") ; searching for logs Local $logconta = 0 While 1 ; single file processing cycle Local $sFileName = FileFindNextFile($hSearch) ; If there is no more file matching the search. If @error Then ExitLoop Local $stringtime = StringTrimRight(StringRight($sFileName, 10), 4) ;obtaining year-month like 201609 If $logfiletimerange - $stringtime > $months2NOTzip Then ;zipping If Not FileExists($logfile & ".zip") Then If Not _Zip_Create($logfile & ".zip", 1) Then GOLLOG("Error " & @error & " creating " & $logfile & ".zip") Else GOLLOG("Created new log archive: " & $logfile & ".zip") EndIf Else GOLLOG("adding to archive: " & $logfile & ".zip") EndIf If Not _zip_additem($logfile & ".zip", $logpath & $sFileName) Then GOLLOG("Error " & @error & " zipping: " & $logpath & $sFileName) Else GOLLOG("Added: " & $logpath & $sFileName) $logconta += 1 If Not FileDelete($logpath & $sFileName) Then GOLLOG("ERROR - Unable to DELETE log file " & $logpath & $sFileName) EndIf EndIf EndIf WEnd GOLLOG("Finished = " & $logconta & " log files zipped") EndFunc ;==>GOLzipLOG Func CFGctrl() ; check ini files and load section names GOLLOG("checkin' INI file..|nocrlf50") If FileExists($inifile) Then $guiactive = IniRead($inifile, "general", "GUI", "?") If $guiactive = "?" Then GOLLOG("INI incomplete, missing section 'general', value GUI") ExitwithError() EndIf $flagITA = IniRead($inifile, "general", "dataITA", "?") If $flagITA = "?" Then GOLLOG("INI incomplete, missing section 'general', value dataITA") ExitwithError() EndIf $flagpwdLastSet = IniRead($inifile, "general", "pwdLastSet", "?") If $flagpwdLastSet = "?" Then GOLLOG("INI incomplete, missing section 'general', value pwdLastSet") ExitwithError() EndIf GOLLOG("reading section names...|nocrlf50") $arrayINIsections = IniReadSectionNames($inifile) GOLLOG("N°" & $arrayINIsections[0] - 1 & " groups to process") Else $message1 = "error: no saved settings !?" GOLLOG($message1) ExitwithError() EndIf GOLLOG("..completed") EndFunc ;==>CFGctrl Func CFGload($section) ; load single ini file section values $INIgroup = IniRead($inifile, $section, "group", "?") $INItomail = IniRead($inifile, $section, "tomail", "?") $INItosend = IniRead($inifile, $section, "tosend", "?") $INIdays1 = IniRead($inifile, $section, "days1", "?") $INIdays2 = IniRead($inifile, $section, "days2", "?") $INImailsubject = IniRead($inifile, $section, "mailsubject", "?") $INIsmpt = IniRead($inifile, $section, "smtp", "?") $INIfromname = IniRead($inifile, $section, "fromname", "?") $INIfromaddress = IniRead($inifile, $section, "fromaddress", "?") EndFunc ;==>CFGload Func ExitwithError() GOLLOG("**********ERROR and STOP****************") Exit EndFunc ;==>ExitwithError The example .ini:
       
      [group1] group=G_IT_PASSWORD_MONITORED days1=5 days2=2 tomail=yourgroup@yourdomain.it ;tosend=user; send mails to the domain user mail address, otherwise send to specified address tosend=0 ;tosend ;1 send mails, 0 disable mails for testing mailsubject=Domain users going to expire passwords smtp=smtp.your.own.server fromname=Password Expiration Guardian fromaddress=PEG@NSC.it [group2] group=G_IT_PASSWORD_NOTIFIED days1=5 days2=2 tomail=user ;tosend=user; send mails to the domain user mail address, otherwise send to specified address tosend=0 ;tosend ;1 send mails, 0 disable mails for testing mailsubject=Password is expiring ! smtp=smtp.your.own.server fromname=Password Expiration Guardian fromaddress=PEG@NSC.it [general] GUI=1 ;1 gui ON for testing, 0 gui disabled dataITA = 1 ;1 translates datetime in italian, 0 for ENG pwdLastSet = 0 ;1 tries to reset the 'pwdLastSet' attribute (you must have permissions), 0 do nothing  
       
×
×
  • Create New...