Jump to content
Sign in to follow this  
VenusProject2

ArrayFindAll on 2D Array Help

Recommended Posts

Appreciate some help with this

Initially I had a [6][3] array & ArrayFindAll works

Then I made it a [6][4] & then a [6][9] arrays & ArrayFindAll doesn't works @error = 6 - $vValue was not found in array

#include <array.au3>
Global $aArray[6][3] = [[1, "A", "1111"], [2, "B", "2222"], [3, "C", "3333"], [4, "D", "4444"], [5, "E", "5555"], [6, "F", "6666"]]
;Global $aArray[6][4] = [[1, "A", "1111","G"], [2, "B", "2222", "M"], [3, "C", "3333", "S"], [4, "D", "4444", "Y"], [5, "E", "5555", "B1"], [6, "F", "6666", "C1"]]
;Global $aArray[6][9] = [[1, "A", "1111", "G", "H","I","J","K","L"], [2, "B", "2222", "M","N", "O","P","Q", "R"], [3, "C", "3333", "S", "T","U","V","W","X"], [4, "D", "4444", "Y", "Z","A1","A2","A3","A4"], [5, "E", "5555", "B1", "B2","B3","B4","B5","B6"], [6, "F", "6666", "C1", "C2","C3","C4","C5","C6"]]
_ArrayDisplay($aArray)
Local $aiResult  = _ArrayFindAll($aArray, "5555",0,0,0,1,3)
If @error = 0 Then
_ArrayDisplay($aiResult)
Else
    MsgBox(0,"","Error " & @error)
EndIf
Exit

Share this post


Link to post
Share on other sites

The array columns are zero based, and unfortunately for your script, if the column searched in is past the end of the array, it corrects your search to be the last column. So when you were searching the 3 column of the array in the 6/3 array, it was actually asking to search the 4th column, since there is no 4th column, it was auto-corrected to search the 3rd. When there actually is a 4th column, the auto-correction doesn't happen, and it searches in the 4th column (column order 0,1,2,3,4). Change the 3 in _arrayfindall to 2, and it works correctly.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

We have all had those moments, I've had many myself. :D


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Colduction
      Hi dear friends!, i'm sorry for creating a new thread (a new problem), i have over than 9 lists that i want to combine them to be this (in this example, there are 3 test files):


      I've written a little code for splitting main information, but i really confused how to make results as "Output.txt", here is that code:
       
      $sRegex_1 = StringRegExp(FileRead("1.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_2 = StringRegExp(FileRead("2.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_3 = StringRegExp(FileRead("3.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) For $i = 0 To UBound($sRegex_1) - 1 ConsoleWrite($sRegex_1[$i] & @CRLF) For $j = 0 To UBound($sRegex_2) - 1 ConsoleWrite($sRegex_2[$j] & @CRLF) For $k = 0 To UBound($sRegex_3) - 1 ConsoleWrite($sRegex_3[$k] & @CRLF) Next Next Next  
    • By nacerbaaziz
      hello evrybody
      here is an example about how to split your texts using a delimiter with the ability to select how much of delimiters shows in each colum  with $i_number
      e.g
      you have a long text and you want to split it in an array
      that evry colum have a number (n) of lines
      i made a function that do that for you
      just call it with a three params
      $s_text
      your text
      $i_number
      the number that you want to put in each col
      $s_siparator
      the siparator
      default is "|"
      here is the function with example
      i hope that it will be useful for you
       
      ****
       
      #include <Array.au3> $s_txt = "some text1some text2|some text3|some text4|some text5|some text6" $array = splitText($s_txt, 2) _ArrayDisplay($array) Func splitText($s_text, $i_number, $s_siparator = "|") Local $a_TXT = StringSplit($s_text, $s_siparator) Local $a_Return[$a_TXT[0] + 1] If ($a_TXT[0] <= $i_number) Or ($i_number <= 0) Then ReDim $a_Return[2] $a_Return[0] = 1 $a_Return[1] = $s_text Return $a_Return EndIf Local $i_Processed = 1, $i_arrayProcessed = 1 Do For $i = $i_Processed To ($i_Processed + $i_number) - 1 If ($a_TXT[0] < $i) Then ExitLoop If Not ($a_Return[$i_arrayProcessed]) Then $a_Return[$i_arrayProcessed] = $a_TXT[$i] Else $a_Return[$i_arrayProcessed] &= $s_siparator & $a_TXT[$i] EndIf $i_Processed += 1 Next $i_arrayProcessed += 1 Until ($a_TXT[0] < $i_Processed) ReDim $a_Return[$i_arrayProcessed] $a_Return[0] = $i_arrayProcessed - 1 Return $a_Return EndFunc ;==>splitText
      accept my greetings
      thanks to
      @Dan_555
      for his notes
       
    • By MesterPerfect
      good morning
      this is the first post here in the autoit forums
      i hope that you can help me in my problem
      i have a JSON encoded
      it a map of my forums
      where i want to make a treeview that have the same type of map
      e.g
      a system (as category)
      windows (as sub category)
      software (as an child item in the windows category)
      .....
      i don't know how to do that
      so, i know that i can do that using the json functions
      but i need your help about how we can do it as the type that i told you
      by the way i need to put the sub info for each item in an array that give me the ability to manage my items
      e.g
      can post thread
      can reply
      message cound ...
      you just give me a small example and i can continue.
      am sorry if this against the rules of the forum.
      but i realy searched a lot but i couldn't
      i hope some one give me the way.
      thank you very much in advance
       
      here is the link of json forum
      https://www.autoitscript.com/forum/topic/148114-a-non-strict-json-udf-jsmn/
      and here is my encoded json file
       
      { "tree_map": { "0": [ 1, 5, 6, 7 ], "1": [ 2 ], "2": [ 4 ], "5": [ 3 ], "6": [ 8 ], "8": [ 9, 10 ] }, "nodes": [ { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 1, "node_id": 1, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Main category", "type_data": {} }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 2, "node_name": null, "node_type_id": "Forum", "parent_node_id": 1, "title": "Main forum", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" }, { "node_id": 2, "title": "Main forum", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 4, "node_name": null, "node_type_id": "Forum", "parent_node_id": 2, "title": "my forums1", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 2, "node_id": 5, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Perfect", "type_data": {} }, { "breadcrumbs": [ { "node_id": 5, "title": "Perfect", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 2, "node_id": 3, "node_name": null, "node_type_id": "Forum", "parent_node_id": 5, "title": "ahmed", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 3, "node_id": 6, "node_name": null, "node_type_id": "Forum", "parent_node_id": 0, "title": "autoit", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 8, "node_name": null, "node_type_id": "Forum", "parent_node_id": 6, "title": "examples", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 9, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "GUI", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 31, "node_id": 10, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "windowEX", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 4, "node_id": 7, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "vbs", "type_data": {} } ] }  
    • By nooneclose
      I need to dynamically resize my 2d array while looping. 
      I know this code:
      ReDim $rArray[UBound($rArray) + 1] works for the rows, however, I also need to increase the columns. How would i go about increasing both rows and columns while looping? 
    • By Zaoka
      Hi guys
      Need little help with filtering.
      I'm trying to filter specific weeks from power pivot table using this code recorded with Excel VBA :
       
      #include <Excel.au3> Global $oExcel = _Excel_Open() Global $oWorkbook = _Excel_BookOpen($oExcel, "C:\Users\....\Orders.xlsb") $oWorkbook.PivotTables("PivotTable1").PivotFields( _ "[Report 2].[Week].[Week]").VisibleItemsList = Array( _ "[Report 2].[Week].&[10]", "[Report 2].[Week].&[11]", _ "[Report 2].[Week].&[12]", "[Report 2].[Week].&[13]", _ "[Report 2].[Week].&[14]", "[Report 2].[Week].&[15]") But get error
      error: Array(): undefined function. Not sure how to resolve this.
×
×
  • Create New...