technicoman Posted March 4, 2015 Share Posted March 4, 2015 j'aimerais bien partager avec vous mon probleme avec la creation d'un scripte qui permet de comparer deux fichiers, le primier existe sur le serveur et le 2eme localement sur le pc client. l'objectif de la comparison c'est d'ecraser le fichier qui existe sur le pc client par celui qui existe au serveur (en cas de la difference). le probleme c'est que le fichier concerné existe dans un dossier (sur le serveur) qui est partagé en $ avec un seul utilisateur admin (avec un mot de passe). alors comment je pourai reccuperer le FileGetSize() et FileGetVersion() depuis un dossier partagé en reseau sur le serveur avec des droits limités et sachant que RunAs ne lance que des programmes et non pas des fonctions? voila mon scripte: #include <FileConstants.au3> #include <Constants.au3> $srv = "serveurdossier$test.exe" $loc = "d:folder" $user = "user" $domaine = "serveur" $pass = "pass@@ssapl" $flg = 2 ; qu'est ce que je pourai mettre ici afin de executer le reste de scripte avec des droits d'administrateurs ;RunAs($user,$domaine,$pass, $flg, ...) >> je sais pas si ça va fonctionner ou non et comment? if not FileExists($srv) then MsgBox($MB_SYSTEMMODAL, "Erreur !", "File Serveur is not exist...") Else Local $iFileSize = FileGetSize($loc) Local $iFileSize1 = FileGetSize($srv) Local $sFileVersion = FileGetVersion($loc) Local $sFileVersion1 = FileGetVersion($srv) if $iFileSize <> $iFileSize1 Or $sFileVersion <> $sFileVersion1 then FileCopy($pcserveur ,$pcloc, 1) MsgBox($MB_SYSTEMMODAL, "msg !", "copie ") else MsgBox($MB_SYSTEMMODAL, "msg !", "non") endif EndIf merci d'avance pour votre aide. Link to comment Share on other sites More sharing options...
TheSaint Posted March 5, 2015 Share Posted March 5, 2015 (edited) Ce est un forum anglais, donc se il vous plaît utiliser Google Translate (comme je l'ai fait pour cela) , pour poster une version anglaise de votre sujet . Toutefois, si ce est une question que vous avez déposé pour obtenir hel avec le code , vous l'avez fait dans la mauvaise partie du forum . Dans ce cas, vous devriez avoir utilisé général Aide & Support ou GUI Aide . This is an English forum, so please use Google Translate (like I did for this), to post an English version of your topic. If however, this is a question you have posted to get help with code, you have done so in the wrong part of the forum. In that case you should have used General Help & Support or GUI Help. Edited March 5, 2015 by TheSaint Make sure brain is in gear before opening mouth! Remember, what is not said, can be just as important as what is said. Spoiler What is the Secret Key? Life is like a Donut If I put effort into communication, I expect you to read properly & fully, or just not comment. Ignoring those who try to divert conversation with irrelevancies. If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it. I'm only big and bad, to those who have an over-active imagination. I may have the Artistic Liesense to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage) Link to comment Share on other sites More sharing options...
GhostLine Posted March 5, 2015 Share Posted March 5, 2015 [i hope it's understandable !!] I'd like to share with you a problem I've encountered when I was creating a script, who has to compare two files. Le first is located on a server, the second on a client PC. The point of this comparison is to delete the client PC file and replace it by the server one, if the files are different. My problem is that the concerned file is located in the server in a folder who's shared with a "$" [Translation note : so it's a "full drive" sharing ?] with only one administrator user (with password). In this context, how can I get the filegetsize() and filegetversion() information, with limited rights and knowing that runas only permit admin granting on program and not functions ? Here's my script : #include <FileConstants.au3> #include <Constants.au3> $srv = "serveurdossier$test.exe" $loc = "d:folder" $user = "user" $domaine = "serveur" $pass = "pass@@ssapl" $flg = 2 ; qu'est ce que je pourai mettre ici afin de executer le reste de scripte avec des droits d'administrateurs ;RunAs($user,$domaine,$pass, $flg, ...) >> je sais pas si ça va fonctionner ou non et comment? if not FileExists($srv) then MsgBox($MB_SYSTEMMODAL, "Erreur !", "File Serveur is not exist...") Else Local $iFileSize = FileGetSize($loc) Local $iFileSize1 = FileGetSize($srv) Local $sFileVersion = FileGetVersion($loc) Local $sFileVersion1 = FileGetVersion($srv) if $iFileSize <> $iFileSize1 Or $sFileVersion <> $sFileVersion1 then FileCopy($pcserveur ,$pcloc, 1) MsgBox($MB_SYSTEMMODAL, "msg !", "copie ") else MsgBox($MB_SYSTEMMODAL, "msg !", "non") endif EndIf Thanks in advance for your help. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted March 5, 2015 Moderators Share Posted March 5, 2015 GhostLine,Are you and technicoman the same person? We do not permit multiple accounts here so if that is the case I will merge the 2 into the Ghostline account. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
GhostLine Posted March 5, 2015 Share Posted March 5, 2015 No no, I'm only a french man who want to help (see all my messages : none is in french) Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted March 5, 2015 Moderators Share Posted March 5, 2015 GhostLine,Compris! [Understood]M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
caramen Posted March 5, 2015 Share Posted March 5, 2015 (edited) M23 xD I guess i can help this frensh guy in pm if he cant speack english. Je pense pouvoir aidé cette personne en privé. si il ne parle pas anglais. and i guess i know how to solve his probleme. Et je crois que je sais geré ton probleme . but plz know: in all case you need an account with the rights to do that. (!!!!!!!!! If you use account password and Id in script you can lost your work for that in france care!!!!!!) mais sache que dans tout les cas tu ddois executé le script avec un compte qui disposes des droits. (!!!!mais fait gaf utilisé les mots de passe et id dans ton script peux te faire perdre ta place en france!!!!!!) Veuille a faire validé ta démarche avant tout. ================================================================================ 1)As a start you can runas explorer.exe with the atribut /separate 1)Pour commencé tu peux simplement lancé explorer.exe avec l'atribut /separate Or 2)RunAs cmd with admin right and then type explorer.exe /separate so you will be able to do admin task from there (or normal task that need rights) 2)RunAs cmd avec les droits admin et ecris explorer.exe /separate alors tu pourra faire des tache admin. (ou des opération normal mais avec des droits) after all all depend of the logic you will use... Tout dependra de la logique que tu utiliseras.... Edited March 5, 2015 by caramen My video tutorials : ( In construction ) || My Discord : https://discord.gg/S9AnwHw How to Ask Help || UIAutomation From Junkew || WebDriver From Danp2 || And Water's UDFs in the Quote Spoiler Water's UDFs:Active Directory (NEW 2018-10-19 - Version 1.4.10.0) - Download - General Help & Support - Example Scripts - WikiOutlookEX (2018-10-31 - Version 1.3.4.1) - Download - General Help & Support - Example Scripts - WikiExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example ScriptsPowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & SupportExcel - Example Scripts - WikiWord - Wiki Tutorials:ADO - Wiki Link to comment Share on other sites More sharing options...
technicoman Posted March 6, 2015 Author Share Posted March 6, 2015 M23 xD I guess i can help this frensh guy in pm if he cant speack english. Je pense pouvoir aidé cette personne en privé. si il ne parle pas anglais. and i guess i know how to solve his probleme. Et je crois que je sais geré ton probleme . but plz know: in all case you need an account with the rights to do that. (!!!!!!!!! If you use account password and Id in script you can lost your work for that in france care!!!!!!) mais sache que dans tout les cas tu ddois executé le script avec un compte qui disposes des droits. (!!!!mais fait gaf utilisé les mots de passe et id dans ton script peux te faire perdre ta place en france!!!!!!) Veuille a faire validé ta démarche avant tout. ================================================================================ 1)As a start you can runas explorer.exe with the atribut /separate 1)Pour commencé tu peux simplement lancé explorer.exe avec l'atribut /separate Or 2)RunAs cmd with admin right and then type explorer.exe /separate so you will be able to do admin task from there (or normal task that need rights) 2)RunAs cmd avec les droits admin et ecris explorer.exe /separate alors tu pourra faire des tache admin. (ou des opération normal mais avec des droits) after all all depend of the logic you will use... Tout dependra de la logique que tu utiliseras.... Thank you SIR for your help I can say that you have put me in the right direction I will try to advance on the script. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now