Jump to content
  1. conmed

    conmed

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan_555
      Hi, 
      i'v just uploaded my latest project: Simple Snippet Manager to the Downloads. area :

       

       The intended usage is to select a Snippet, and to copy it's contents into your favorite Editor.
          The Copy/Paste process happens over the (windows)Clipboard. 
          The previous clipboard content is not restored.
          There is a time limit of 60 seconds, in which the pasting of the text is allowed (starting when the App window gets inactive).  
          The Hotkey is reenabled, when the main Window is activated.
          
          This is a File/Folder based manager. 
          The App is configured to hold 4000 files and 400 folders with searching depth of 5 sub-folders.
          
          The root folder is freely selectable, but it  should be a Folder with writing permission.
          Please install the App in a folder with Writing permission, too. 
          This App only uses an .ini file to save it's configuration, which has to be in the same folder as the App.
          
      First configuration:
      1. Open the config Window.
      2. Enter the Language name, create or seek a root folder, enter an extension.
      3. Click on Set button.
      4. Click on the Exit button.
      The Language configuration is done, adding files or folders are needed:
       1. Select the language from the dropbox list, and click on Get Lang button.
      2a. Right Click on the root folder, chose New folder to add categories.
      2b. or chose New/Edit file to open the builtin text editor
       3. Paste or Write a snippet-code, enter a filename and save it.
       
       (Repeat the 3. as needed)
       
      Usage:
      Select a language, then click on Get Lang button.
      Choose a file with the left mouse button.
      Check if the code was loaded in the Textarea at the bottom.
      Switch to your Sourcecode editor, and press the Hotkey (default= Ctrl/Strg b) to copy and paste the text.
      There is a time limit of 60 seconds, after the main window gets inactive, in which the copy&pasting is allowed.
      Changelog:
      V1.02        (24.06.2020)
                  Addition: Undocumented ini setting: StartLoadLastUsedLanguage
                            Setting this to 1 (default value) will now reload the Last used language at start.
                            Last used language counts for the Language, selected with [Get Lang] button. The [Config] button will delete the last used language.
                            LastUsedLanguageNr, LastUsedLanguageName ini settings are used internaly for the above function.
                   Added version string to the main Window title.
      V1.01        (23.06.2020)
                  Bugfix    : Starting the App without the ini file now sets the correct starting Hotkey (Ctrl b)
                  Addition: Clipboard is saved, before pasting, and restored after pasting. (May work with text data only. p.s. untested!)
    • By Dan_555
      Simple Snippet Manager (AutoIt v3.3.14.5)
       The intended usage is to select a Snippet, and to copy it's contents into your favorite Editor.
          The Copy/Paste process happens over the (windows)Clipboard. 
          The previous clipboard content is not restored.
          There is a time limit of 60 seconds, in which the pasting of the text is allowed (starting when the App window gets inactive).  
          The Hotkey is reenabled, when the main Window is activated.
          
          This is a File/Folder based manager. 
          The App is configured to hold 4000 files and 400 folders with searching depth of 5 sub-folders.
          
          The root folder is freely selectable, but it  should be a Folder with writing permission.
          Please install the App in a folder with Writing permission, too. 
          This App only uses an .ini file to save it's configuration, which has to be in the same folder as the App.
          
      First configuration:
      1. Open the config Window.
      2. Enter the Language name, create or seek a root folder, enter an extension.
      3. Click on Set button.
      4. Click on the Exit button.
      The Language configuration is done, adding files or folders are needed:
       1. Select the language from the dropbox list, and click on Get Lang button.
      2a. Right Click on the root folder, chose New folder to add categories.
      2b. or chose New/Edit file to open the builtin text editor
       3. Paste or Write a snippet-code, enter a filename and save it.
       
       (Repeat the 3. as needed)
       
      Usage:
      Select a language, then click on Get Lang button.
      Choose a file with the left mouse button.
      Check if the code was loaded in the Textarea at the bottom.
      Switch to your sourcecode editor, and press the Hotkey (default= Ctrl/Strg b) to copy and paste the text.
      There is a timelimit of 60 seconds, after the main window gets inactive, in which the copy&pasting is allowed.
       
      The Download includes:
      32 + 64bit exe, sourcecode, icon, read me text and 2 Instructional Helpfiles in Html and PDF format.
    • By Stormgrade
      Hello.
      I'm french, sorry for my english.
      I release my project, a password manager : Password Keeper
      First I would like to thanks Guinness and Melba23 for their help, and I'm very sorry for those I forget, please remind me to add you.
      Well my program manage and crypt passwords, first I understand if you don't trust me for this kind of sensible software, but I remember you that all the the source files are at your disposal, fell free to explore them.
      The login is : admin and you can change it later
      How it work ? see Methode de cryptage en BDD.pdf in french
      login

       
      The main interface
      You can obviously add,modify and delete your entry, also you can search with keywords

      A password generator is included

      I won't update it anymore.
      It's a BSD license.
      Autoit version : 3.3.14.5
      Have a good day.
      Methode de cryptage en BDD.pdf Passwordkeeper.7z
    • By nacerbaaziz
      hello autoit group
      please i've a question
      i had make a function that put some thing into the clipBoard and paste it
      using the send function
      e.g
      ClipPut("hello")
      send("^v")
       
      when the keyboard is english all things work fine
      but when the keyboard is arabic the send command write the ltr v insted of the text in clipboard
      i was tryed to use
      send("{ctrldown}v{ctrlUp}")
      but the same
      please can any one help me
       
    • By rudi
      Hi,
      from other postings here as a start I'm quite Close to my Goal of putting formatted text to the clipboard:
      #include-once #include <GUIConstantsEx.au3> #include <GuiRichEdit.au3> #include <WindowsConstants.au3> Global $g_idLblMsg, $g_hRichEdit Example("The first text will be formatted ""as is""" & @CRLF & _ "(Default Font and font size)", "This text is formatted differently") MsgBox(0, "Rich Text copied", "Formatted Text put to clipboard") Func Example($TextDefault, $TextCourier) Local $hGui, $iMsg, $idBtnNext, $iStep = 0 $hGui = GUICreate("Example (" & StringTrimRight(@ScriptName, StringLen(".exe")) & ")", 320, 350, -1, -1) $g_hRichEdit = _GUICtrlRichEdit_Create($hGui, $TextDefault, 10, 10, 300, 220, BitOR($ES_MULTILINE, $WS_VSCROLL, $ES_AUTOVSCROLL)) $g_idLblMsg = GUICtrlCreateLabel("", 10, 235, 300, 60) GUISetState(@SW_SHOW) _GUICtrlRichEdit_SetSel($g_hRichEdit, -1, -1) ; set selection behind last CHAR in RTF_EDIT _GUICtrlRichEdit_SetFont($g_hRichEdit, 8, "Courier New") ; change font to 8pt, Courier New _GUICtrlRichEdit_AppendText($g_hRichEdit, @CRLF & $TextCourier) _GUICtrlRichEdit_SetSel($g_hRichEdit, 0, -1) ; select all the content of the RTF_EDIT _GUICtrlRichEdit_Copy($g_hRichEdit) ; put the selection to the clipboard EndFunc ;==>Example  
      Finally the clipboard content has to hold pre-formatted data to be pasted into an email body. for the 2nd part I'd like to add a frame around the text, like I did manually before taking this screenshot.



      Any suggestions, or maybe some absolutely different Approach?
       
      CU, Rudi.
×
×
  • Create New...