Jump to content

Recommended Posts

Hi, i have problem to get all files from server in list, it say in help file that u can get data from current session but it wont work

 

#RequireAdmin
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GUIListBox.au3>
#include <GUIListView.au3>
#include <FTPEx.au3>
#include <Array.au3>

#Region ### START Koda GUI section ###
$GUI = GUICreate("FTP tool", 754, 613, 691, 157)
GUICtrlCreateLabel("Host", 16, 16, 26, 17)
GUICtrlCreateLabel("Port", 192, 16, 23, 17)
GUICtrlCreateLabel("Username", 16, 56, 52, 17)
GUICtrlCreateLabel("Password", 16, 88, 50, 17)
GUICtrlCreateLabel("Status : ", 8, 152, 43, 17)
$status = GUICtrlCreateLabel("Not connected", 52, 152, 221, 17)
$host = GUICtrlCreateInput("", 48, 12, 121, 21)
$port = GUICtrlCreateCombo("", 224, 12, 65, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
GUICtrlSetData(-1, "21|80")
$username = GUICtrlCreateInput("", 79, 52, 121, 21)
$password = GUICtrlCreateInput("", 79, 81, 121, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
$connectBtn = GUICtrlCreateButton("CONNECT", 56, 192, 75, 25)
$disconnectBtn = GUICtrlCreateButton("DISCONNECT", 143, 192, 107, 25)
$List = GUICtrlCreateList("", 16, 240, 721, 340, 0)

GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

If GUICtrlRead($status) = 'Not connected' Then GUICtrlSetState($disconnectBtn, $GUI_DISABLE) ; disable disconnect button if not connected
GUICtrlSetData($port, '21') ; default port

Global $status, $host, $port, $username, $password, $FTPopen, $FTPConnect, $List

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $connectBtn
            _connectFTP()
        Case $disconnectBtn
            _disconnectFTP()

    EndSwitch
WEnd

; connection to FTP server
Func _connectFTP()

    Local $_host = GUICtrlRead($host) ; host name
    Local $_username = GUICtrlRead($username) ; username
    Local $_password = GUICtrlRead($password) ; password
    Local $_port = GUICtrlRead($port) ; port

    Local $FTPopen = _FTP_Open('FTP connection test') ; name of connection
    Local $FTPConnect = _FTP_Connect($FTPopen, $_host, $_username, $_password, '', $_port) ; connect

        ; try to connect to server
        If Not @error Then ; if not error
            GUICtrlSetData($status, 'Connected') ; set status to connected
            GUICtrlSetState($connectBtn, $GUI_DISABLE) ; disable connect button
            GUICtrlSetState($disconnectBtn, $GUI_ENABLE) ; enable disconnect button
            _listData()
        Else
            MsgBox(48, 'FTP connection error', "Can't connect to server, error = " & @error) ; if there is connection error
        EndIf

EndFunc

; disconnect from FTP server
Func _disconnectFTP()
    
    _FTP_Close($FTPopen)
    _FTP_Close($FTPConnect)
    GUICtrlSetState($disconnectBtn, $GUI_DISABLE)
    GUICtrlSetState($connectBtn, $GUI_ENABLE)
    GUICtrlSetData($status, 'Not connected')
    _GUICtrlListBox_ResetContent($List)
    
EndFunc

; list all files on FTP server
Func _listData()

    ; get current dir on server
    $FTPdirData = _FTP_DirGetCurrent($FTPopen)

    ; Add files in list box
    _GUICtrlListBox_BeginUpdate($List)
    _GUICtrlListBox_ResetContent($List)
    _GUICtrlListBox_Dir($List, "", $FTPdirData, False)
    _GUICtrlListBox_EndUpdate($List)


EndFunc

 

Edited by akira2891
Link to post
Share on other sites

akira2891,

1 - Where is it failing?

2 - What is the value of $FTPdirData

3 - See _FTP_ListToArray in Help file.  You are not getting a list of files, just a directory name.

kylomas

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Link to post
Share on other sites
#RequireAdmin
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GUIListBox.au3>
#include <GUIListView.au3>
#include <FTPEx.au3>
#include <Array.au3>

#Region ### START Koda GUI section ###
$GUI = GUICreate("FTP tool", 754, 613, 691, 157)
GUICtrlCreateLabel("Host", 16, 16, 26, 17)
GUICtrlCreateLabel("Port", 192, 16, 23, 17)
GUICtrlCreateLabel("Username", 16, 56, 52, 17)
GUICtrlCreateLabel("Password", 16, 88, 50, 17)
GUICtrlCreateLabel("Status : ", 8, 152, 43, 17)
$status = GUICtrlCreateLabel("Not connected", 52, 152, 221, 17)
$host = GUICtrlCreateInput("", 48, 12, 121, 21)
$port = GUICtrlCreateCombo("", 224, 12, 65, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
GUICtrlSetData(-1, "21|80")
$username = GUICtrlCreateInput("", 79, 52, 121, 21)
$password = GUICtrlCreateInput("", 79, 81, 121, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
$connectBtn = GUICtrlCreateButton("CONNECT", 56, 192, 75, 25)
$disconnectBtn = GUICtrlCreateButton("DISCONNECT", 143, 192, 107, 25)
$List = GUICtrlCreateList("", 16, 240, 721, 340, 0)

GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

If GUICtrlRead($status) = 'Not connected' Then GUICtrlSetState($disconnectBtn, $GUI_DISABLE) ; disable disconnect button if not connected
GUICtrlSetData($port, '21') ; default port

Global $status, $host, $port, $username, $password, $FTPopen, $FTPConnect, $List

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $connectBtn
            _connectFTP()
        Case $disconnectBtn
            _disconnectFTP()

    EndSwitch
WEnd

; connection to FTP server
Func _connectFTP()

    Local $_host = GUICtrlRead($host) ; host name
    Local $_username = GUICtrlRead($username) ; username
    Local $_password = GUICtrlRead($password) ; password
    Local $_port = GUICtrlRead($port) ; port

    $FTPopen = _FTP_Open('FTP connection test',0) ; name of connection
    $FTPConnect = _FTP_Connect($FTPopen, $_host, $_username, $_password, '', $_port) ; connect

        ; try to connect to server
        If Not @error Then ; if not error
            GUICtrlSetData($status, 'Connected') ; set status to connected
            GUICtrlSetState($connectBtn, $GUI_DISABLE) ; disable connect button
            GUICtrlSetState($disconnectBtn, $GUI_ENABLE) ; enable disconnect button
            _listData()
        Else
            MsgBox(48, 'FTP connection error', "Can't connect to server, @error = " & @error & ", @extended = " & @extended) ; if there is connection error
        EndIf

EndFunc

; disconnect from FTP server
Func _disconnectFTP()

    _FTP_Close($FTPopen)
    _FTP_Close($FTPConnect)
    GUICtrlSetState($disconnectBtn, $GUI_DISABLE)
    GUICtrlSetState($connectBtn, $GUI_ENABLE)
    GUICtrlSetData($status, 'Not connected')
    _GUICtrlListBox_ResetContent($List)

EndFunc

; list all files on FTP server
Func _listData()

    ; get current dir on server
    $FTPdirData = _FTP_DirGetCurrent($FTPConnect)

;~  MsgBox(0, "", $FTPdirData & ', @error = ' & @error & ' , @extended = ' & @extended)

    ; Add files in list box
    _GUICtrlListBox_BeginUpdate($List)
    _GUICtrlListBox_ResetContent($List)
    _GUICtrlListBox_Dir($List, "", $FTPdirData, False)
    _GUICtrlListBox_EndUpdate($List)

EndFunc

 

Here is the updated script but now when i connect im getting list of my drives on computer ?


yVTsdMU.png

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Colduction
      Hi dear friends!, i'm sorry for creating a new thread (a new problem), i have over than 9 lists that i want to combine them to be this (in this example, there are 3 test files):


      I've written a little code for splitting main information, but i really confused how to make results as "Output.txt", here is that code:
       
      $sRegex_1 = StringRegExp(FileRead("1.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_2 = StringRegExp(FileRead("2.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) $sRegex_3 = StringRegExp(FileRead("3.txt"), '(?s:(?<=\=\=\r\n)(.*?)(?=\r\n\=\=))', 3) For $i = 0 To UBound($sRegex_1) - 1 ConsoleWrite($sRegex_1[$i] & @CRLF) For $j = 0 To UBound($sRegex_2) - 1 ConsoleWrite($sRegex_2[$j] & @CRLF) For $k = 0 To UBound($sRegex_3) - 1 ConsoleWrite($sRegex_3[$k] & @CRLF) Next Next Next  
    • By Colduction
      Hi guys!, i have a problem to convert Python code to AutoIt code, in fact i had not coded with Python yet!, this code is about permutation a string's case, i will be happy with your comments :)❤;

      Python code:
       
      # Python code to print all permutations # with respect to cases # Function to generate permutations def permute(inp): n = len(inp) # Number of permutations is 2^n mx = 1 << n # Converting string to lower case inp = inp.lower() # Using all subsequences and permuting them for i in range(mx): # If j-th bit is set, we convert it to upper case combination = [k for k in inp] for j in range(n): if (((i >> j) & 1) == 1): combination[j] = inp[j].upper() temp = "" # Printing current combination for i in combination: temp += i print(temp), # Driver code permute("Hello") # This code is contributed by Sachin Bisht
      My code in AutoIt:
      ; https://www.geeksforgeeks.org/permute-string-changing-case/ _PermuteCase("ABC") Func _PermuteCase($sText) If StringRegExp($sText, "^[A-Za-z]{1,}$") Then Local $iLength = StringLen($sText) ; Get length of the text. Local $iMaxPerm = 2 ^ $iLength ; Number of permutations is 2^n Local $sLow_Text = StringLower($sText) ; Converting string to lower case Local $asChrs = StringToASCIIArray($sLow_Text) ; Split the text into array of chars. For $i = 1 To $iMaxPerm Step 1 For $j = 0 To $asChrs[0] ;................................................... Next Next Else Return SetError(-1, 0, "Error: Input is incorrect!") EndIf EndFunc ;==>_PermuteCase  
       
       
       
       
       
      ====================== SOLUTION by @TheXman ======================
       
    • By TheAutomator
      I'm working on a script that needs to work with a huge database inside a combobox.
      I'm looking for the best way to link a multidimensional array to that data to load that data on to textfields.

      example:
      combo item 0 = "A", data = [index linked to combo item 0] [1,0,5,4,87,9,"xyz"]
      combo item 1 = "B", data = [index linked to combo item 1] [1,6,5,4,87,9,"zzz"]
      combo item 3 = "A", data = [index linked to combo item 3] [1,6,4,4,87,9,"aaa"] ; yes also double items!
      Would also like to be able to delete and add items on the fly btw..
      Local $INDEX[0][10] ; ubound wil be resized like a stack while loading from a textfile ;inside gui: local $Combo = GUICtrlCreateCombo('...', 10, 10, 290, 25) ;gui loop: While True Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $Combo display() ; how do i link my array index to the combo labels to know what to show in the textfields? ; NOTE: (there are duplicate items in the combobox!) EndSwitch WEnd Any toughs are welcome.
      I was thinking about using _GUICtrlComboBox_GetCurSel($Combo) and use that integer to refer to the index (dimension 1) of the array 
      Thanks, TheAutomator
       
    • By wysocki
      I have a smartphone and I use it to access my email. However, when composing an email on it I have a problem. My list of phone contacts on the phone is very different from my list of email contacts in my Thunderbird desktop app.  I use my Gmail address book to store primarily phone contacts, and I use Thunderbird for my list of email contacts. I wanted a way to get my Thunderbird contact list onto my smartphone to be able to compose emails to addresses in that list. Here's my solution.
      I wrote a script to export my Thunderbird Personal Address Book to a csv file. It then reads that file and re-writes it with html wrappers around the data to make it into a nicely formatted web page. It then uploads the htm file to my website. On my smartphone, I created a shortcut to the file's URL and whenever I click it, I get the list displayed. Each contact shows name and email address along with a COPY button that will put the address into the clipboard. Then in my email client, I can easily paste that address into it. Alternatively, clicking on the actual email link will open a new message dialog in your email client with that address already entered.
      To use the app, all you need to do is use Thunderbird and have a webserver available. You'll need to download the FTPEX.AU3 file from this website and make a few changes to some constants around line 17 for FTP login info, etc.
       
      pab2ftp.au3
    • By nacerbaaziz
      good morning all.
      first lit me give you all a thinks to your help
      you're help me allot thank you all.
      sirs today i've a new problem
      it's not a problem but thing i want to add it to blind accessability.
      the ListBox can send a notification when the user send a double click on it items
      but as we know that the blind users can't use the mouse for that they use the keybord to navigate.
      as we know that the enter replace the double click on the keybord
      for that i need when the user send a inter above any listBox item the list send a double click notification.
      i know some of you tell me that i can use the  GUISetAccelerators function
      but the enter has a other tasks such as leav a blanc line on edits and activate the defaultButton and other tasks.
      that what i need and i hope that you can help me
      this is a simple example.
      #include <GUIConstantsEx.au3> #include <StructureConstants.au3> #include <MsgBoxConstants.au3> #include <WindowsConstants.au3> #include <ListBoxConstants.au3> Example() Func Example() Local $sMESSAGE = "The following buttons have been clicked" GUICreate("My GUI list") ; will create a dialog box that when displayed is centered Local $idButton_Add = GUICtrlCreateButton("Add", 64, 32, 75, 25) Local $idButton_Clear = GUICtrlCreateButton("Clear", 64, 72, 75, 25) global $idMylist = GUICtrlCreateList("buttons that have been clicked", 176, 32, 121, 97) GUICtrlSetLimit(-1, 200) ; to limit horizontal scrolling GUICtrlSetData(-1, $sMESSAGE) global $DummyList = GUICtrlCreateDummy() GUICtrlSendToDummy($DummyList, 1) Local $idButton_Close = GUICtrlCreateButton("my closing button", 64, 160, 175, 25) GUIRegisterMsg($WM_command, "WM_command") GUISetState(@SW_SHOW) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton_Add GUICtrlSetData($idMylist, "You clicked button No1|") Case $idButton_Clear GUICtrlSetData($idMylist, "") Case $idButton_Close MsgBox($MB_SYSTEMMODAL, "", "the closing button has been clicked", 2) Exit case $DummyList $g_iTemp = GUICtrlRead($DummyList) if $g_iTemp = $LBN_DBLCLK then ;$LBN_DBLCLK then msgBox(64, "", "") endIf GUICtrlSendToDummy($DummyList, 0) EndSwitch WEnd EndFunc ;==>Example Func WM_command($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = $lParam $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case GUICtrlGetHandle($idMylist) Switch $iCode Case $LBN_SELCHANGE, $LBN_DBLCLK, $LBN_SELCANCEL, $LBN_SETFOCUS GUICtrlSendToDummy($DummyList, $iCode) case else ;GUICtrlSendToDummy($DummyTreeview, 1) EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc  
×
×
  • Create New...