Jump to content
  1. blemas

    blemas

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By shital
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_UseX64=y #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** RunAs(test", @ComputerName, "testinng",2,"wmic product where ""name= '%notepadexamples%'"" call uninstall", @SystemDir & "\wbem", @SW_MAXIMIZE)  it not working 
       
    • By cruisepandey
      Hi There ! 
      I have a script here : 
       
      ;Launch CMD
      Run("C:\Windows\System32\cmd.exe")
      sleep(2000)
      $cmdHandle = WinActivate("C:\Windows\System32\cmd.exe")
      Sleep(2000)
      ;Sending document
      ControlSend($cmdHandle, "", "", "ftp" & @CRLF)
      ControlSend($cmdHandle, "", "", "open" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "first command" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "second-coomand" & @CRLF)
       
      first-command and second-command I can't provide cause it's internal. I have complied this .au3 file into an exe and it does the work. But I need to invoke this with Java. Java code I have tried is : 
       
          ProcessBuilder pb = new ProcessBuilder("C:\\Users\\username\\eclipse-workspace\\Examples\\src\\com\\own\\examples\\etc.exe");
          pb.start();
          Thread.sleep(5000);
       
      Through java it just launches the cmd and nothing happens after that. Please help !!
    • By Chimp
      I'm trying to drive a command prompt by sending instructions via a NamedPipe.
      This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
      This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
      This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
      Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
      suggestions on how to make it work are welcome
      thanks
      #include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite  
    • By Inpho
      Hi All,
      I didn't know where to put this; my apologies if this is the wrong location.
      When you plug a Samsung mobile device (phone, tablet, etc.) into the USB of a Windows PC, you can right-click the device in My Computer and select Properties. Here, it will show you the correct serial number of the device. Clearly Windows doesn't use adb to get the SN so I'm stuck at how to get the SN without adb and where the device doesn't have a drive letter assigned to it.
      When I last picked this up, I tried seemingly everything I could from wmi(?) and winmgmts(?) but either it's hidden cloak-and-dagger style or I can't see the forest for the trees...
      Does anyone know what API Windows uses when getting the serial number of a device Windows calls a Portable Media Player?

    • By KingOfNothing
      This is for mac address spoofing.
      Before a mod gives me the ban hammer for posting code such as this, id like to explain I recently had a necessity for it.
      A lot of places use mac addresses to identify devices/machines and control internet permissions.
      I myself love the xfinity wifi hotspots placed all around where I live as I can connect to them and save data usage instead of tethering my phone.
      BUT! They use a captive portal with a webpage interface in javascript and (not too much to my surprise), wifey says some of her crap wont open that page.
      I explained she can disable wifi on the device, use computer and spoof to the mac address of what she wants to use. Then sign into the portal as she would normally with computer.
      Once connected, shut the computer down and enable wifi for that device again. Once enabled shes got net access. edit: Wife looked at me like I was speaking latin.....lol
      ; ; ; Function: Set_Mac() ; ; Parameter(s): $s_Desired_Mac = Need I really explain? ; $s_Target_Net_Adapter = Network adapter name (one can use the adapter index as well but thats less "user friendly" ; $b_Toggle_Device = For my wife cuz it needs full automation for her to stop bothering me ; ; Author(s): KingOfNothing credz to google & autoitscript.com members ; ; ;===================================================================== Opt('MustDeclareVars', 0) ;cause its late in the morning and im just gonna trust this should still fly #include <WinApi.au3> $MacAddressRegKey = "HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0007" ; ^^^ After making this I read online that this should be some "CurrentControlSet" ; key instead. However, I watched registry while changing things in adapter properties ; to see that key, which works fine on my 3 test machines.... ;easy example Set_Mac("Wireless Network Connection","",true) ;msgbox(0,"",Get_Mac()) Func Set_Mac($s_Targeted_Adapter, $s_Desired_Mac = "D20000000000", $b_Toggle_Device = true ) Local $sMac, $s_Tmp, $val, $sVar = "" $sMac = Get_Mac() while stringlen($s_Desired_Mac)< 12 and stringlen($s_Desired_Mac)> 0 ;this will append zeros if mac length is too short $s_Desired_Mac = $s_Desired_Mac & "0" wend if stringlen($s_Desired_Mac)> 12 then ;likewise if too many characters entered to function, then we should truincate some $s_Desired_Mac = StringLeft ($s_Desired_Mac,12) endif ;this creates a random mac address with very little actual thought behind it. ;Im sure theres some formal means to devising a valid mac address but this simple crap suits my needs atm.... if $s_Desired_Mac = "" then For $i = 1 To 10 $sVar= Chr(Random(48, 57, 1)) ;0-9 $s_Tmp = $s_Tmp & $sVar Next $s_Desired_Mac = "D2" & $s_Tmp $s_Desired_Mac = StringUpper($s_Desired_Mac) endif $val = RegWrite($MacAddressRegKey, "NetworkAddress", "REG_SZ", $s_Desired_Mac) if $val =0 then MsgBox(0,"Mac Address Changer ","Could not write to registry as needed to change your mac address!" & @CRLF & "Please restart this program with administrator rights!") Exit endif ;in order to benifit from changing the registry, one must disable/re-enable the adapter. ;This cmd line query to wmic prevents the need to do so in device manager manually if $b_Toggle_Device = true then ShellExecuteWait ("C:\Windows\System32\wbem\wmic.exe", "path win32_networkadapter where NetConnectionID=" & chr(34) & $s_Targeted_Adapter & chr(34) & " call disable" ,"",$SHEX_OPEN,@SW_HIDE) ShellExecuteWait ("C:\Windows\System32\wbem\wmic.exe","path win32_networkadapter where NetConnectionID=" & chr(34) & $s_Targeted_Adapter & chr(34) & " call enable" ,"",$SHEX_OPEN,@SW_HIDE) endif ;Would be smart to catch the return of the function there in some varible for error handling, but its too late for me to give a crap atm.... MsgBox(0,"Mac Address Changer", "Old Mac = " & $sMac & @crlf & "New Mac = " & $s_Desired_Mac) clipput($s_Desired_Mac) endfunc Func Get_Mac() Local $xRet $xRet= RegRead($MacAddressRegKey, "NetworkAddress") return $xRet EndFunc  
      Sorry bout the messy penmenship. Aint looked at the tidy thing yet....🧐
×
×
  • Create New...