Jump to content

Recommended Posts

Dear AutoIt Community,

I need some clarification as to why GUI does not work as planned. This is the snippet of code that's troubling me:

Else
      GUICreate("Path", 320, 120, @DesktopWidth / 2 - 160, @DesktopHeight / 2 - 45, -1, $WS_EX_ACCEPTFILES)
      Local $idFile = GUICtrlCreateInput("", 10, 5, 300, 20)
      GUICtrlSetState(-1, $GUI_DROPACCEPTED)
      Local $idPath = GUICtrlRead($idFile)
      GUICtrlCreateLabel("Type path of .exe or drag file into InputBox", 10, 35)
      Local $idBtn = GUICtrlCreateButton("OK", 160 - 30, 75, 60, 20)
      GUISetState(@SW_SHOW)

      ; Loop until the user exits.
      While 1
         Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
               ExitLoop
            Case $idBtn
               ExitLoop
         EndSwitch
      WEnd

      Run($idPath)
      ProcessWait("Patcher.exe")
      WinWait("Patcher")
      WinWaitActive("Patcher")
      If Not WinActive("Patcher") Then
         WinActivate("atcher")
      EndIf
   EndIf

My problem here is that when I want to exit the created GUI or press the button $idBtn, it won't exit. However, when I execute the following snippet by itself, it works.

GUICreate("Path", 320, 120, @DesktopWidth / 2 - 160, @DesktopHeight / 2 - 45, -1, $WS_EX_ACCEPTFILES)
   Local $idFile = GUICtrlCreateInput("", 10, 5, 300, 20)
   GUICtrlSetState(-1, $GUI_DROPACCEPTED)
   Local $idPath = GUICtrlRead($idFile)
   GUICtrlCreateLabel("Type path of .exe or drag file into InputBox", 10, 35)
   Local $idBtn = GUICtrlCreateButton("OK", 160 - 30, 75, 60, 20)

   GUISetState(@SW_SHOW)

   ; Loop until the user exits.
   While 1
      Switch GUIGetMsg()
         Case $GUI_EVENT_CLOSE
            ExitLoop
         Case $idBtn
            ExitLoop
      EndSwitch
   WEnd

I don't know what to do.

Mny Thanks in advance,

~Medallyon

Link to post
Share on other sites
  • Moderators

Medallyon,

The script is almost certainly halting at either the ProcessActive or WinWaitActive lines - add a timeout to them both so that the script proceeds with the loop until the process and GUI are present.

M23

P.S. And seeing the name of the process/GUI, could I point you to the Forum rules if you have not already read them.

 

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

@Melba23

Thanks for your quick response.

Medallyon,

The script is almost certainly halting at either the ProcessActive or WinWaitActive lines - add a timeout to them both so that the script proceeds with the loop until the process and GUI are present.

I added a timeout to both of the lines but that did nothing.

P.S. And seeing the name of the process/GUI, could I point you to the Forum rules if you have not already read them.

Ayy, I know the rules. My script in no way or form messes with games or game integrity (as far as I know). It's a mere process of clicking Login so that I don't have to do it.

Why?

Because 

  1. I have too much time on my hands
  2. I take joy in creating things

This is the full code:

<snip>

If you have any more ideas I could try out, I welcome you to share them :)

Many thanks in advance,

~Medallyon

Edited by Melba23
Code removed
Link to post
Share on other sites
  • Moderators

Medallyon,

Ayy, I know the rules.

Really? So how do you square this line:

Run("lol.launcher.exe")

with this prohibition?

Do not ask for help with AutoIt scripts, post links to, or start discussion topics on the following subjects:
[...]
•Launching, automation or script interaction with games or game servers, regardless of the game.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Moderators

Medallyon,

Correct - thread closed.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ashraful089
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #Region ### START Koda GUI section ### Form=C:\Users\Engr. Ashraful\Videos\koda_1.7.3.0\Forms\ProgramPlayer\FormProgamToOpen.kxf
      $FormInput = GUICreate("Input", 302, 205, 454, 285)
      $Resolution = GUICtrlCreateCombo("Resolution", 80, 24, 145, 25)
      GUICtrlSetData(-1, "1920|VM1920|1366")
      $ComboProgramType = GUICtrlCreateCombo("Program Type Selection", 80, 64, 145, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
      GUICtrlSetData(-1, "Multimedia|Official|Design|Web")
      $ButtonEnter = GUICtrlCreateButton("Enter", 104, 104, 75, 25)
      GUISetState(@SW_SHOW)
      #EndRegion ### END Koda GUI section ###
      While 1
          $nMsg = GUIGetMsg()
          Switch $nMsg
              Case $GUI_EVENT_CLOSE
                  Exit
          EndSwitch
      WEnd
       
      please help me to read combo box input and use the value for another function/ work
       
    • By Aapjuh
      Hi,
      I am having a problem properly saving the Width of a resizable Gui.
      When a user resizes the Gui it gets saved in an ini when the Gui closes to then restore the new Width upon reopening the app.
      with GUICreate("myGui",300,200,Default,Default,$WS_SIZEBOX)
      WinGetPos($hGUI) returns 314, and WinGetClientSize($hGUI) returns 298
      when its then saved in the ini the gui keeps expanding or shrinking every time its opened by +14 or -2
      I figure it has to do with borders etc, but i also guess borders depend on the window theme and whatnot or is user specific, so i can't just do $GuiWidth = $GetGuiWidth[arr] -14 or +2 right?

      is there a proper way of doing this?
      Thanks in advance,
      Aapjuh
    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
    • By CYBRIX
      So I am a person who has learned programming off the internet, without structured courses, and I'm trying to create a UI element that can be used like "GUICtrlCreate...".

      I'd like to get some kind of insight on how to improve the code of a Graph element that I have created.
      I am unfamiliar on the standards for creating such UI elements, and assume I'll get some valuable insight here.
       
      Here's some sample code: (I tried to make it look a bit less upsetting to those who know better, but be warned: not pretty.)
      #include <WinAPISys.au3> #include <WinAPI.au3> #include <WinAPIGdi.au3> #include <Array.au3> #include <WindowsConstants.au3> #include <GUIConstants.au3> Local $hWnd = GUICreate("Test", 200, 200) GUISetState(@SW_SHOW, $hWnd) Local $hGraph = _GraphStartUp($hWnd, 10, 30, 180, 180) Local $nData, $nDataMax = 1000, $hDataTimer = TimerInit() While GUIGetMsg() <> $GUI_EVENT_ClOSE If TimerDiff($hDataTimer) >= 150 Then $nData = Random(0, $nDataMax) _UpdateGraph($nData) $hDataTimer = TimerInit() EndIf Sleep(20) WEnd _GraphShutDown($hWnd, $hGraph) Exit Func _GraphStartUp($hWnd, $x, $y, $w, $h, $nUpdateTimes = 1000, $nResolution = 60) Global $hBluePen = _WinAPI_CreatePen($PS_SOLID, 2, _WinAPI_RGB(220, 0, 0)) Global $hGreyPen = _WinAPI_CreatePen($PS_DASH, 1, _WinAPI_RGB(100, 100, 100)) Global $hBlackPen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(0, 0, 0)) Global $hWhitePen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(255, 255, 255)) Global $nGraphRes = $nResolution Global $aGraphData[$nGraphRes + 1] For $i = 2 To $nGraphRes $aGraphData[$i] = 0 Next Global $hWinDC = _WinAPI_GetWindowDC($hWnd) Global $nGraphX = $x Global $nGraphY = $y Global $nGraphWidth = $w Global $nGraphHeight = $h Global $nGraphXUnit = $nGraphWidth / ($nGraphRes - 1) Global $nGraphBottomY = $nGraphY + $nGraphHeight Global $nGraphMaxX = $nGraphX + $nGraphWidth Global $aUpdateArea[4][2] = [[$nGraphX - 1, $nGraphY - 1], [$nGraphX - 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphY - 1]] Global $pUpdateAreaRgn = _WinAPI_CreatePolygonRgn($aUpdateArea) Global $pTextRect = _WinAPI_CreateRectEx($nGraphX + 1, $nGraphY + 1, $nGraphWidth / 2, $nGraphHeight / 4) Global $nGreatestValue = 1 GLobal $pGraphArea = _WinAPI_CreateRectEx($nGraphX - 7, $nGraphY - 26, $nGraphWidth + 14, $nGraphHeight + 2) Global $pDrawCall = DllCallbackRegister('_DrawGraph', 'none', '') Global $pGraphTimer = _WinAPI_SetTimer($hWnd, 567891234, $nUpdateTimes, DllCallbackGetPtr($pDrawCall)) _DrawGraph() Return $pGraphTimer EndFunc Func _DrawGraph() Global $hPen $nGreatestValue = _ArrayMax($aGraphData, 1, 1) $hPen = _WinAPI_SelectObject($hWinDC, $hWhitePen) _WinAPI_PaintRgn($hWinDC, $pUpdateAreaRgn) $hPen = _WinAPI_SelectObject($hWinDC, $hGreyPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphMaxX, $nGraphY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY + ($nGraphHeight / 2), $nGraphMaxX, $nGraphY + ($nGraphHeight / 2)) _WinAPI_DrawLine($hWinDC, $nGraphMaxX, $nGraphY, $nGraphMaxX, $nGraphBottomY) $hPen = _WinAPI_SelectObject($hWinDC, $hBluePen) For $i = 1 To $nGraphRes - 1 _WinAPI_DrawLine($hWinDC, $nGraphX + (($i - 1) * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i] / $nGreatestValue * $nGraphHeight), $nGraphX + ($i * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i + 1] / $nGreatestValue * $nGraphHeight)) Next $hPen = _WinAPI_SelectObject($hWinDC, $hBlackPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphBottomY, $nGraphMaxX, $nGraphBottomY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphX, $nGraphBottomY) _WinAPI_DrawText($hWinDC, Round($aGraphData[$nGraphRes], 2), $pTextRect, $DT_LEFT) EndFunc Func _UpdateGraph($nData) _ArrayAdd($aGraphData, $nData) _ArrayDelete($aGraphData, 1) EndFunc Func _GraphShutDown($hWnd, $pGraphTimer) _WinAPI_SelectObject($hWinDC, $hPen) _WinAPI_DeleteObject($hBlackPen) _WinAPI_DeleteObject($hGreyPen) _WinAPI_DeleteObject($hBluePen) _WinAPI_DeleteObject($hWhitePen) _WinAPI_ReleaseDC($hWnd, $hWinDC) _WinAPI_KillTimer($hWnd, $pGraphTimer) DllCallbackFree($pDrawCall) _WinAPI_RedrawWindow($hWnd, $pGraphArea) EndFunc  
    • By mLipok
      I check this snippet:
      https://www.autoitscript.com/wiki/Snippets_(_GUI_)#GUI_With_Scrollable_TabItem
      Modified them and I refactored. That's because I needed to adapt it to my needs (I'll write later).
      I thought I understood how it works.
      But I was wrong.
       
      This is my example which is showing what I want to achieve.
      #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <GuiScrollBars.au3> #include <GUIScrollbars_Ex.au3> #include <StringConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> GUIRegisterMsg($WM_VSCROLL, WM_VSCROLL) _Example() Func _Example() Local $i_Count = 30 Local $a_Options_List[$i_Count + 1] $a_Options_List[0] = $i_Count For $i = 1 To $i_Count $a_Options_List[$i] = 'Test #' & $i Next ConsoleWrite("- " & _my_gui_Wybierz('Testing', $a_Options_List) & @CRLF) EndFunc ;==>_Example Func _my_gui_Wybierz($s_Description, $a_Options_List = "", $i_Left = Default, $i_Top = Default, $i_Width = Default, $hWnd_Parent = 0) ;~ WinSetOnTop($ACROBAT_TITLE, "", $WINDOWS_NOONTOP ) If $i_Left = Default Then $i_Left = -1 If $i_Top = Default Then $i_Top = -1 If $i_Width = Default Then $i_Width = 400 #Region _my_gui_Wybierz - GUI Creation Local $i_Height = 600 Local $hWND_DateForm = GUICreate("", $i_Width, $i_Height, $i_Left, $i_Top, BitOR(0, $WS_SIZEBOX), -1, $hWnd_Parent) WinSetOnTop($hWND_DateForm, "", $WINDOWS_ONTOP) Local $hChild = GUICreate("Scroll area", $i_Width - 15, $i_Height - 40, 0, 0, $WS_POPUP, $WS_EX_MDICHILD, $hWND_DateForm) _GUIScrollBars_Init($hChild, -1) _GUIScrollBars_ShowScrollBar($hChild, $SB_HORZ, False) _GUIScrollBars_ShowScrollBar($hChild, $SB_VERT, True) ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) GUICtrlCreateLabel("", 10, 7, $i_Width - 45, 80) Local $id_Label1 = GUICtrlCreateLabel("", 10, 7 + 5, $i_Width - 45, 80 - 5) GUICtrlSetBkColor(-1, 0x88AABB) Local $a_List_of_Button_ID[$a_Options_List[0] + 1] For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 0 And $IDX_Item < 10 Then $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ $IDX_Item & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) Else $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ Chr(Asc('A') + $IDX_Item - 10) & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) EndIf Next Local $temp_var = $a_Options_List[0] Local $a_accelerators[($temp_var * 2) + 1][2] Local $i_Accelerators_Counter = 0 Local $i_Accelerator_Char1 = '' Local $i_Accelerator_Char2 = '' For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 9 Then $i_Accelerator_Char1 = Chr(Asc('A') + $IDX_Item - 10) $i_Accelerator_Char2 = Chr(Asc('a') + $IDX_Item - 10) Else $i_Accelerator_Char1 = "{NUMPAD" & $IDX_Item & "}" ;Chr(48 + $IDX_Item) $i_Accelerator_Char2 = $IDX_Item EndIf $a_accelerators[($IDX_Item * 2) - 1][0] = $i_Accelerator_Char1 $a_accelerators[($IDX_Item * 2) - 1][1] = $a_List_of_Button_ID[$IDX_Item] $a_accelerators[($IDX_Item * 2) - 1 + 1][0] = $i_Accelerator_Char2 $a_accelerators[($IDX_Item * 2) - 1 + 1][1] = $a_List_of_Button_ID[$IDX_Item] $i_Accelerators_Counter += 2 Next $a_accelerators[0][0] = $i_Accelerators_Counter GUISetAccelerators($a_accelerators, $hChild) GUICtrlSetData($id_Label1, $s_Description) GUISetState(@SW_SHOW, $hWND_DateForm) GUISetState(@SW_SHOW, $hChild) #EndRegion _my_gui_Wybierz - GUI Creation #Region - _my_gui_Wybierz - Handling messages Local $i_Selected_item = 0 Local $v_Return_Value = "" Local $a_GUI_Messages While 1 $a_GUI_Messages = GUIGetMsg($GUI_EVENT_ARRAY) If $a_GUI_Messages[0] = $GUI_EVENT_NONE Then ; do nothing ElseIf $a_GUI_Messages[1] = $hWND_DateForm Then If $a_GUI_Messages[0] = $GUI_EVENT_CLOSE Then ExitLoop ElseIf $a_GUI_Messages[1] <> $hChild Then ; .... Else For $IDX_Check = 1 To $a_Options_List[0] If $a_List_of_Button_ID[$IDX_Check] = $a_GUI_Messages[0] Then $v_Return_Value = GUICtrlRead($a_List_of_Button_ID[$IDX_Check]) $i_Selected_item = $IDX_Check $v_Return_Value = _RegExpFirstMatch($v_Return_Value, '.+?\. (.+)') ExitLoop 2 ; exit from ForNext and also from WhileWend EndIf Next EndIf WEnd #EndRegion - _my_gui_Wybierz - Handling messages GUIDelete($hChild) GUIDelete($hWND_DateForm) Return SetError(0, $i_Selected_item, $v_Return_Value) EndFunc ;==>_my_gui_Wybierz Func WM_VSCROLL($hWnd, $msg, $wParam, $lParam) #forceref $msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ; Set the position and then retrieve it. Due to adjustments ; by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Func _RegExpFirstMatch($s_Data, $s_Pattern) Local $a_Results = StringRegExp($s_Data, $s_Pattern, $STR_REGEXPARRAYGLOBALMATCH) If @error Then Return SetError(@error, @extended, '') Return SetError(0, UBound($a_Results), $a_Results[0]) EndFunc ;==>_RegExpFirstMatch  
      I have few problems with this code, and many question related to them.
      Question 1:
      How to make the Scrollbars to work ?
      I mean to scroll buttons.
      Question 2:
      Do I must to ues Child Window, or is it possible to scroll buttons without using Child Window ?
      Question 3:
      Why after uncommenting this following line:
      ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) the ScrollBar disapears ?
×
×
  • Create New...