Jump to content
Sign in to follow this  
BetaLeaf

Episode Seeker

Recommended Posts

I watch alot of anime and stuff and some sites don't have navigation to go to the next or previous episode or it's inconvenient. To resolve my delima, I created a script to change episodes at the press of a hotkey. It will work with any site that tracks the episode via url, in sequential order, and isn't also tracked by another identifier. Sites like Hulu and Crunchyroll won't work (tho their navigations is anything but inconvient). No this is for more obscure websites that have a simple url layout like www.example.com/video/bleach-024-engligh-dub.

To start up it will give you instructions. Hover over the first digit of the episode in the url(in the above example,  you would put your mouse over the 0) and press Ctrl+Insert to set the coordinates. From now on, when you press Ctrl+Left/Right, you will go forward or back an episode based on which button you pressed. It clicks the url, copies the ep number only, changes the ep number in variable, format it for leading 0 to match the source, and paste back in and submit, all in half a sec. It also attempts to exit full screen by pressing esc.

Here is the source. You don't need to do anything special to compile it. All of my works are open source and licensed with GPLv3. Enjoy =D

Global $x = "656";some default coordinates to load on start
Global $y = "44" ;^
Opt("WinTitleMatchMode", -2);Case insensitive ANYWHERE match mode
HotKeySet("^{ins}", "GetCoord")
HotKeySet("^{left}", "SeekPrev")
HotKeySet("^{right}", "SeekNext")
MsgBox(0, "How To Use", "Move your mouse under the first digit in the url that keeps track of which episode you are on, then press Ctrl+Insert.")
While 1;idle when not in use
    Sleep(1000)
WEnd
Func SeekPrev()
    Seek("Left")
EndFunc   ;==>SeekPrev
Func SeekNext()
    Seek("Right")
EndFunc   ;==>SeekNext
Func Seek($direction)
    ClipPut("");Erase contents of clipboard.
    Select ;First one that is true is the only one that gets used. If you have other browsers running, you may need to reorder this list.
        Case ProcessExists("iexplorer.exe") = True ;If iexplorer.exe is running then...
            $wintitle = "Internet Explorer";Use internet explorer.
        Case ProcessExists("MicrosoftEdge.exe") = True
            $wintitle = "Microsoft Edge"
        Case ProcessExists("opera.exe") = True
            $wintitle = "Opera"
        Case ProcessExists("firefox.exe") = True
            $wintitle = "Firefox"
        Case ProcessExists("chrome.exe") = True
            $wintitle = "Chrome"
        Case Else;Throws an error message incase you used a browser that is not set up.
            MsgBox(0, "Incompatible browser used.", "Unable to find a compatible browser to manipulate. Please use one of the follow browsers and try again: Chrome, Firefox, Opera, Microsoft Edge, Internet Explorer." & @CRLF & "You could also add an entry for your own browser. See Lines 24-33.")
            Exit
    EndSelect
    WinActivate($wintitle);Activate the window if it wasn't focused
    ControlSend($wintitle, "", "", "{esc}");Exit fullscreen (Note: ESC does not exit fullscreen on some sites)
    Sleep(50);give your browser some time to exit fullscreen.
    ControlClick($wintitle, "", "", "left", 2, $x, $y);Click where you set the coordinates.
    Do
        ControlSend($wintitle, "", "", "^c");Copy selected text to clipboard.
        $clipboard = ClipGet();Get the contents of the clipboard and store it in a string variable.
    Until StringLen($clipboard) > 0 ;Error Check Function, Make sure something was copied into the clipboard, else it waits until something is copied. It should be the value of the current ep you are on.
    $format = '%0' & StringLen($clipboard) & 'd'; Set the text format to be the same length as the original, padded with any 0's the original had.
    If $direction = "Left" Then ;If launched with Seek("Left") then decrease ep counter
        $clipboard = $clipboard - 1
    Else;Else Increase it
        $clipboard = $clipboard + 1
    EndIf
    $clipboard = StringFormat($format, $clipboard);format updated clipboard variable
    ClipPut($clipboard);write to clipboard the contents of $clipboard
    ControlSend($wintitle, "", "", "^v");paste clipboard, replacing the old ep in the url with tne new one.
    Sleep(50);Some browsers need to wait a moment after pasting, else it won't submit the correct request to the requested page.
    ControlSend($wintitle, "", "", "{enter}");Submit request to website.
EndFunc   ;==>Seek
Func GetCoord();This function sets the coordinates to be used in Seek()
    Local $coord = MouseGetPos();Get mouse Coordinates
    $x = $coord[0];Rewrites previous global variable
    $y = $coord[1];Rewrites previous global variable
    MsgBox(0, "Coordinates Updated", "X = " & $x & "." & @CRLF & "y = " & $y & "." & @CRLF & @CRLF & "Press Ctrl+Left to Seek Back" & @CRLF & "Press Ctrl+Right to Seek Forward")
EndFunc   ;==>GetCoord

 


 

False Positive Reporter - Mass email all anti-virus vendors with an attachment of your program for fast and easy whitelisting.

RollbarSDK UDF - Provides real-time error alerting & debugging tools for developers. 

 

Share this post


Link to post
Share on other sites

I had to re-start the PC after running your code 

Care to enlighten the OP what exactly happened so they can fix it.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites

Yea, sorry. I have no idea how to fix CTRL key getting stuck. I have tried sending down and up commands in previous scripts but it still glitches up. You can also just close the script from the tray in the taskbar (near the clock) if you have issues.

It should also be noted that this script was designed to work with sites that host videos and follow a certain url pattern. It's pointless to use this script on this website.

Edited by BetaLeaf

 

False Positive Reporter - Mass email all anti-virus vendors with an attachment of your program for fast and easy whitelisting.

RollbarSDK UDF - Provides real-time error alerting & debugging tools for developers. 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By generic-username
      I've been trying to use the hotkey but it doesn't seem to work. The console log says "AU3 Check ended" thing everytime I run the script, it annoys the hell out of me. I'm quite new to AutoIt. Any help would be greatly appreciated.
      HotKeySet("a", "notepad") HotKeySet("b", "notepad") HotKeySet("c", "notepad") HotKeySet("d", "notepad") HotKeySet("e", "notepad") HotKeySet("f", "notepad") HotKeySet("g", "notepad") HotKeySet("h", "notepad") HotKeySet("i", "notepad") HotKeySet("j", "notepad") HotKeySet("k", "notepad") HotKeySet("l", "notepad") HotKeySet("m", "notepad") HotKeySet("n", "notepad") HotKeySet("o", "notepad") HotKeySet("p", "notepad") HotKeySet("q", "notepad") HotKeySet("r", "notepad") HotKeySet("s", "notepad") HotKeySet("t", "notepad") HotKeySet("u", "notepad") HotKeySet("v", "notepad") HotKeySet("w", "notepad") HotKeySet("x", "notepad") HotKeySet("y", "notepad") HotKeySet("z", "notepad") HotKeySet("{[}", "notepad") HotKeySet("{]}", "notepad") HotKeySet("{'}", "notepad") HotKeySet("{;}", "notepad") HotKeySet("{,}", "notepad") HotKeySet("{/}", "notepad") HotKeySet("{?}", "notepad") HotKeySet("{.}", "notepad") HotKeySet("{<}", "notepad") HotKeySet("{>}", "notepad") HotKeySet("{}}", "notepad") HotKeySet("{\}", "notepad") HotKeySet("{{}", "notepad") HotKeySet("{|}", "notepad") HotKeySet("{=}", "notepad") HotKeySet("{+}", "notepad") HotKeySet("{-}", "notepad") HotKeySet("{_}", "notepad") HotKeySet("{(}", "notepad") HotKeySet("{)}", "notepad") HotKeySet("{*}", "notepad") HotKeySet("{&}", "notepad") HotKeySet("{^}", "notepad") HotKeySet("{%}", "notepad") HotKeySet("{$}", "notepad") HotKeySet("{#}", "notepad") HotKeySet("{@}", "notepad") HotKeySet("{!}", "notepad") HotKeySet("{`}", "notepad") HotKeySet("{~}", "notepad") HotKeySet("{1}", "notepad") HotKeySet("{2}", "notepad") HotKeySet("{3}", "notepad") HotKeySet("{4}", "notepad") HotKeySet("{5}", "notepad") HotKeySet("{6}", "notepad") HotKeySet("{7}", "notepad") HotKeySet("{8}", "notepad") HotKeySet("{9}", "notepad") HotKeySet("{0}", "notepad") Func notepad() Run("notepad.exe") EndFunc  
    • By Dan_555
      Hi, 
      here is a configurable HotKey Gui script, which i wrote for my current Project:
      #include <Array.au3> #include <ComboConstants.au3> #include <GuiComboBox.au3> #include <GUIConstantsEx.au3> #include <String.au3> #include <WindowsConstants.au3> #include <Array.au3> Global $snip_inifile = @ScriptDir & "\" & "hotkeygui.ini" ;If $HKSTRING is changed, make sure to adjust the $z number in the SetHotkeyKeys function. Local $HKSTRING = "[;][#;Win][!;Alt][+;Shift][^;Ctrl][0;0][1;1][2;2][3;3][4;4][5;5][6;6][7;7][8;8][9;9][a;a][b;b][c;c][d;d][e;e][f;f][g;g][h;h][i;i][j;j][k;k][l;l][m;m][n;n][o;o][p;p][q;q][r;r][s;s][t;t][u;u][v;v][w;w][x;x][y;y][z;z][{PAUSE};Pause][{BREAK};Break][{HOME};Home/Pos1][{END};END][{PGUP};Page UP][{PGDN};Page Down][{F1};F1][{F2};F2][{F3};F3][{F4};F4][{F5};F5][{F6};F6][{F7};F7][{F8};F8][{F9};F9][{F10};F10][{F11};F11][{F12};F12][{SPACE};Space]" Local $HKT = _StringBetween($HKSTRING, "[", "]") Global $HK, $HKS Global $h_HotkeyTestInput Dim $HK[0][2] ;Hotkey keys+names Dim $HKS[6] ;Hotkey (ini)settings 0-3 combo boxes, 4 = Redirect the hotkey test to the input box, 5=Current Hotkey Set. For $x = 0 To UBound($HKT) - 1 ;Make an array including the text from HKSTRING _ArrayAdd($HK, $HKT[$x], 0, ";") Next $HKT = "" $HKSTRING = "" SetHotkeyKeys(0) ;Set the initial hotkey SetHotkeyKeys(1) ;Open the config-gui while 1 ;Test the hotkey. Output is in the console. Exit through traymenue. sleep (10) WEnd Func SetHotkeyKeys($showgui = 0) ;$showgui 0 = Set the saved hotkeys, 1 = Show gui to change the settings Local $a, $b, $c, $z $z=4 ;$z of the text from $HK will go in to c1-c3, the rest goes to c4 $HKS[0] = IniRead($snip_inifile, "hotkey", "0", "4") $HKS[1] = IniRead($snip_inifile, "hotkey", "1", "0") $HKS[2] = IniRead($snip_inifile, "hotkey", "2", "0") $HKS[3] = IniRead($snip_inifile, "hotkey", "3", "12") $HKS[4] = 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If $showgui = 1 Then $HKS[4] = 1 #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Hotkey Config", 317, 79, -1, -1, $WS_POPUP + $WS_CAPTION) $C1 = GUICtrlCreateCombo("", 4, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C2 = GUICtrlCreateCombo("", 82, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C3 = GUICtrlCreateCombo("", 161, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C4 = GUICtrlCreateCombo("", 239, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $Label1 = GUICtrlCreateLabel("Please set a hotkey to use. Note: Not all combos may work.", 4, 30, 300, 17) $Button1 = GUICtrlCreateButton("Set + Save", 4, 4, 70, 23) $h_HotkeyTestInput = GUICtrlCreateInput("Test", 82, 5, 150, 21) $Button2 = GUICtrlCreateButton("Exit", 239, 5, 72, 23) _GUICtrlComboBox_SetMinVisible($C4, 60) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### For $x = 0 To UBound($HK) - 1 If $x <= $z Then _GUICtrlComboBox_AddString($C1, $HK[$x][1]) _GUICtrlComboBox_AddString($C2, $HK[$x][1]) _GUICtrlComboBox_AddString($C3, $HK[$x][1]) Else _GUICtrlComboBox_AddString($C4, $HK[$x][1]) EndIf Next _GUICtrlComboBox_SetCurSel($C1, $HKS[0]) _GUICtrlComboBox_SetCurSel($C2, $HKS[1]) _GUICtrlComboBox_SetCurSel($C3, $HKS[2]) _GUICtrlComboBox_SetCurSel($C4, $HKS[3]) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $Button2 GUIDelete($Form1) ExitLoop Case $Button1 $HKS[0] = _GUICtrlComboBox_GetCurSel($C1) ;Read the combo - boxes $HKS[1] = _GUICtrlComboBox_GetCurSel($C2) $HKS[2] = _GUICtrlComboBox_GetCurSel($C3) $HKS[3] = _GUICtrlComboBox_GetCurSel($C4) HotKeySet($HKS[5]) ;Clear the Old Hotkey $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z +1][0] ;Assemble the hotkey string, use $z+1 ! If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) ;Set the hotkey or display a message IniWrite($snip_inifile, "hotkey", "0", $HKS[0]) ;Save the hotkey to the ini file IniWrite($snip_inifile, "hotkey", "1", $HKS[1]) IniWrite($snip_inifile, "hotkey", "2", $HKS[2]) IniWrite($snip_inifile, "hotkey", "3", $HKS[3]) EndSwitch WEnd EndIf If $HKS[4] = 0 Then ;Function was called with 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) Else $HKS[4] = 0 EndIf EndFunc ;==>SetHotkeyKeys Func DoHotkey() If $HKS[4] = 0 Then ;Main function ConsoleWrite("PRESS" & @CRLF) Else ;Gui test code: GUICtrlSetData($h_HotkeyTestInput, "Hotkey ! " & @hour & ":" & @min & ":" & @SEC) EndIf EndFunc ;==>DisplayActiveProcess This script uses only 1 hotkey, and saves it  into an ini file.
      To load and use the saved Hotkey from the ini use: SetHotkeyKeys(0) 
      And to open the configuration window, use SetHotkeyKeys(1). 
      Have fun.
    • By Bhooshan
      I need to mute an ongoing call on Microsoft teams without activating the window. Teams allows us to mute using shortcut key Ctrl+Shift+m but only when the window is active.
      # Used set option as ongoing call can be with any person which leads to change in Title Name.
      AutoItSetOption ( "WinTitleMatchMode", 2 ) 
      # I am not clear with the control ID which will be good to use here and also the key combination of ^M       
      ControlSend ( "Microsoft Teams", "", "[CLASS:Intermediate D3D Window; INSTANCE:1]", "{ctrl down}")
       
      Can anyone help...!!! 
       

    • By Blois
      Hi Guis,
       
      I need to create keyboard shortcut to navigate the tabs and activate them, but I could not use the code below:
      #include <TabConstants.au3> #include <WindowsConstants.au3> #include <GuiTab.au3> #include <GUIConstantsEx.au3> HotKeySet("^{TAB}", "_TabRight") HotKeySet("^+{TAB}", "_TabLeft") $gui = GUICreate("test",450, 300) $Tab1 = GUICtrlCreateTab(20, 24, 425, 201) $TabSheet1 = GUICtrlCreateTabItem("Tabsheet 1") $lbContagemGrupos2 = GUICtrlCreateLabel("aaaa", 50, 50) GUICtrlSetColor(-1, 0x0000FF) GUICtrlCreateTabItem("") $TabSheet2 = GUICtrlCreateTabItem(" ") $TabSheet3 = GUICtrlCreateTabItem(" ") GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func _TabRight() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos + 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Func _TabLeft() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos - 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Exit  
      can you help me?
    • By guner7
      Hi everyone,
      I would like to share a simple snippet where I use for my hotkey script.
      I was searching for a solution whereby pressing a same key, I could have different outcome according to the way the key is being pressed.
      1) Double tap/press fast (like double click the mouse) - outcome A
      2) Long press or HOLD for awhile (2-4 sec) - outcome B
      #Include <Timers.au3> Global $interval_timer, $counter HotKeySet("{F10}", "_terminate") While 1 Sleep(10) WEnd Func _terminate() Local $itv_timer $itv_timer = _Timer_Diff($interval_timer) $interval_timer = _Timer_Init() ;ConsoleWrite($itv_timer & @CRLF) ;to review the timer difference so I can decide the range to capture double tap sequence If $itv_timer > 100 And $itv_timer < 250 Then $counter = 0 $interval_timer = _Timer_Init() MsgBox("","","double tap detected") Elseif $counter >= 25 Then $counter = 0 $interval_timer = _Timer_Init() MsgBox("","","long press detected") ElseIf $itv_timer < 50 Then $counter = $counter + 1 ConsoleWrite($counter & @CRLF) Else $counter = 0 EndIf EndFunc The trick here is to collect and use the frequency of the hotkey is called, and the time difference between each time the hotkey is being called.
      My coding style is not efficient and can be such a mess most of the time, any suggestion or better coding are welcome.
      I hope you find this one helpful.
×
×
  • Create New...