Jump to content

Recommended Posts

Hello I have been going to this forum regularly for a couple weeks, getting all sorts of good info from you people.

So first off thanks, you are all gentlemen/women and scholars.

I just wanted to point out that I think it would be neat if you could double click either side of the quotation marks in the Scite editor to select the string of text within. Instead of having to manually select all the text within, which is not hard, but u may sometimes miss a extra character or something. Just like how you can select variables and single words by double clicking. Thanks to all those who have worked on and continue to work on Autoit, I love it.

 

Share this post


Link to post
Share on other sites

The current suggestion I can offer as alternative is to put you caret after the start quotation mark, press Ctrl+Shift and hit the right-arrow till you are at the end quotation mark.
The other option probably is to make your own LUA functions that does this for you and assign a shortcut to it.

Jos

 

 

Share this post


Link to post
Share on other sites

Thanks  Jos,

The CTRL + Shift then > will go past the quotes if there is no space between the last char and the end quote.
Even though this account is  almost 6 years old, I only recently started doing anything code related so I will likely not attempt making an lua for a while yet, but I will certainly keep that in mind.

All the best,

 

Chris

 

Share this post


Link to post
Share on other sites

Ok, just for fun:

Add the below func to the personalTools.lua in %localappdata\AutoIt v3\SciTE

--------------------------------------------------------------------------------
-- demo() LUA script
-- to be able to use this script you add the following to your SciTEUSer.properties (without the leading "--"):
--#x lua test func
--command.name.41.$(au3)=Test
--command.mode.41.$(au3)=subsystem:lua,savebefore:no
--command.shortcut.41.$(au3)=Ctrl+Shift+F
--command.41.$(au3)=InvokeTool PersonalTools.Demo
--
--------------------------------------------------------------------------------
function PersonalTools:Demo()
    editor.SelectionStart = editor.CurrentPos
    if editor.StyleAt[editor.CurrentPos] == SCE_AU3_STRING then
        for i = editor.CurrentPos, editor.LineEndPosition[editor:LineFromPosition(editor.CurrentPos)] do
            if editor.StyleAt[i] ~= SCE_AU3_STRING then
                editor.SelectionEnd = i-1
                break
            end
        end
    end
end

.. and add the commented lines in your SciTEUser.properties and remove the " --" at the start of the lines.

Ctrl+Shift+F will select till the end of a String.

Jos

Edited by Jos

Share this post


Link to post
Share on other sites

This one will find the full string and you can place the caret anywhere in the literal string:

function PersonalTools:Demo()
    editor.SelectionStart = editor.CurrentPos
    if editor.StyleAt[editor.CurrentPos] == SCE_AU3_STRING then
        -- find the beginning of the string
        for i = editor.CurrentPos, editor:PositionFromLine(editor:LineFromPosition(editor.CurrentPos)),-1 do
            if editor.StyleAt[i] ~= SCE_AU3_STRING then
                editor.SelectionStart = i+2
                break
            end
        end
        -- find the end of the string
        for i = editor.CurrentPos, editor.LineEndPosition[editor:LineFromPosition(editor.CurrentPos)] do
            -- Make sure we don't count brackets in strings.
            if editor.StyleAt[i] ~= SCE_AU3_STRING then
                editor.SelectionEnd = i-1
                break
            end
        end
    end
end

Jos

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By jmp
      i am trying to get number from string using this code :
      #include <IE.au3> $oIE = _IEAttach ("Edu.corner") Local $aName = "Student name & Code:", $iaName = "0" Local $oTds = _IETagNameGetCollection($oIE, "td") For $oTd In $oTds If $oTd.InnerText = $aName Then $iaName = $oTd.NextElementSibling.InnerText $iGet = StringRegExpReplace($iaName, "\D", "") EndIf Next MsgBox(0, "", $iGet) it was get number like 52503058
      But, I want to get only student code 5250. (Different student have different code, sometime its 3 digits, Sometime 4)

       
    • By Inpho
      Hi All,
      I intend on keeping custom functions/UDFs (works in progress) here; if anyone wants to use any code, feel free.
      String functions:
      #AutoIt3Wrapper_AU3Check_Parameters=-d -w- 1 -w 2 -w 3 -w 4 -w 5 -w 6 #include-once ; #FUNCTION# ==================================================================================================================== ; Name ..........: _DateTimeGet ; Description ...: Returns the date and time formatted for use in sortable filenames, logs, listviews, etc. ; Syntax ........: _DateTimeGet(iType = 1[, $bHumanFormat = False]) ; Parameters ....: $iType - [optional] an integer value. Default is 1. ; 1 - Date and time in file-friendly format; 20190115_113756 ; 2 - Date in file-friendly format; 20190115 ; 3 - Time in file friendly format; 113756 ; $bHumanFormat - [optional] a boolean value. Default is False. ; True - Includes slashes in the date and colons in the time with a space inbetween ; False - No slashes or colons included with an underscore inbetween ; Return values .: Success - String ; Failure - Sets @error to non-zero and returns an empty string ; Author ........: Sam Coates ; =============================================================================================================================== Func _DateTimeGet($iType = 1, $bHumanFormat = False) If $iType < 1 Or $iType > 3 Then Return (SetError(-1, 0, "")) ;; Param1: ;; 1 = Date and time in file friendly format: 20190115_113756 ;; 2 = Date in file friendly format: 20190115 ;; 3 = Time in file friendly format: 113756 ;; Param2: ;; True = Use human-readable format: 15/01/2019 11:37:56 Local $sTime = @HOUR & ":" & @MIN & ":" & @SEC Local $sDate = @MDAY & "/" & @MON & "/" & @YEAR If $iType = 1 Then If $bHumanFormat = False Then $sTime = StringReplace($sTime, ":", "") $sDate = StringReplace($sDate, "/", "") $sDate = StringTrimLeft($sDate, 4) & StringMid($sDate, 3, 2) & StringLeft($sDate, 2) Return ($sDate & "_" & $sTime) Else Return ($sDate & " " & $sTime) EndIf ElseIf $iType = 2 Then If $bHumanFormat = False Then $sDate = StringReplace($sDate, "/", "") $sDate = StringTrimLeft($sDate, 4) & StringMid($sDate, 3, 2) & StringLeft($sDate, 2) EndIf Return ($sDate) ElseIf $iType = 3 Then If $bHumanFormat = False Then $sTime = StringReplace($sTime, "/", "") EndIf Return ($sTime) EndIf EndFunc ;==>_DateTimeGet ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileExtension ; Description ...: Returns a file extension from a filename/FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileExtension($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringTrimLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileExtension($sPath) Return (StringTrimLeft($sPath, StringInStr($sPath, ".", 0, -1))) EndFunc ;==>_FileToFileExtension ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileName ; Description ...: Returns a filename from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileName($sPath[, $bIncludeExtension = True]) ; Parameters ....: $sPath - a string value. ; $bIncludeExtension - [optional] a boolean value. Default is True. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileName($sPath, $bIncludeExtension = True) Local $sReturn = StringTrimLeft($sPath, StringInStr($sPath, "\", 0, -1)) If $bIncludeExtension = False Then $sReturn = StringLeft($sReturn, StringInStr($sReturn, ".", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFileName ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFilePath ; Description ...: Returns a folder path from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFilePath($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFilePath($sPath) Return (StringLeft($sPath, StringInStr($sPath, "\", 0, -1) - 1)) EndFunc ;==>_FileToFilePath ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringLeft ; Description ...: Searches for a string inside a string, then removes everything on the right of that string ; Syntax ........: _StringLeft($sString, $sRemove[, $iCaseSense = 0, $iOccurrence = 1]) ; Parameters ....: $sString - a string value. The string to search inside. ; $sRemove - a string value. The string to search for. ; $iCaseSense - an integer value. Flag to indicate if the operations should be case sensitive. ; $iOccurrence - an integer value. Which occurrence of the substring to find in the string. Use a ; negative occurrence to search from the right side. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringLeft($sString, $sRemove, $iCaseSense = 0, $iOccurrence = 1) Return (StringLeft($sString, StringInStr($sString, $sRemove, $iCaseSense, $iOccurrence) - 1)) EndFunc ;==>_StringLeft ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringRandom ; Description ...: Returns a string of random characters ; Syntax ........: _StringRandom($iAmount[, $iType = 1]) ; Parameters ....: $iAmount - an integer value. Length of returned string ; $iType - [optional] an integer value. Default is 1. ; 1 - Return digits (0-9) ; 2 - Return hexadecimal (0-9, A - F) ; 3 - Return Alphanumeric upper (0-9, A - Z) ; 4 - Return Alphanumeric (0-9, A - Z, a - z) ; 5 - Return Alpha upper (A - Z) ; 6 - Return Alpha (A - Z, a - z) ; Return values .: Success - String ; Failure - Empty string and @error flag as follows: ; @error : 1 - $iAmount is not a positive integer ; 2 - $iType is out of bounds ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringRandom($iAmount, $iType = 1) If $iAmount < 1 Or IsInt($iAmount) = 0 Then Return (SetError(-1, 0, "")) Local $sString = "" Local $iRandomLow = 1, $iRandomHigh = 62 #Tidy_Off Local Static $aCharId[63] = [0, Chr(48), Chr(49), Chr(50), Chr(51), Chr(52), Chr(53), Chr(54), Chr(55), Chr(56), Chr(57), Chr(65), Chr(66), Chr(67), _ Chr(68), Chr(69), Chr(70), Chr(71), Chr(72), Chr(73), Chr(74), Chr(75), Chr(76), Chr(77), Chr(78), Chr(79), Chr(80), _ Chr(81), Chr(82), Chr(83), Chr(84), Chr(85), Chr(86), Chr(87), Chr(88), Chr(89), Chr(90), Chr(97), Chr(98), Chr(99), _ Chr(100), Chr(101), Chr(102), Chr(103), Chr(104), Chr(105), Chr(106), Chr(107), Chr(108), Chr(109), Chr(110), Chr(111), _ Chr(112), Chr(113), Chr(114), Chr(115), Chr(116), Chr(117), Chr(118), Chr(119), Chr(120), Chr(121), Chr(122)] #Tidy_On If $iType = 1 Then ;; digits: 1 - 10 $iRandomHigh = 10 ElseIf $iType = 2 Then ;; hexadecimal: 1 - 16 $iRandomHigh = 16 ElseIf $iType = 3 Then ;; alnumupper: 1 - 36 $iRandomHigh = 36 ElseIf $iType = 4 Then ;; alnum: 1 - 62 $iRandomHigh = 62 ElseIf $iType = 5 Then ;; alphaupper: 11 - 36 $iRandomLow = 11 $iRandomHigh = 36 ElseIf $iType = 6 Then ;; alpha: 11 = 62 $iRandomLow = 11 $iRandomHigh = 62 Else Return (SetError(-2, 0, "")) EndIf For $i = 1 To $iAmount $sString &= $aCharId[Random($iRandomLow, $iRandomHigh, 1)] ;; append string with corresponding random character from ascii array Next Return ($sString) EndFunc ;==>_StringRandom ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringTrimLeft ; Description ...: Searches for a string inside a string, then removes everything on the left of that string ; Syntax ........: _StringTrimLeft($sString, $sRemove[, $iCaseSense = 0, $iOccurrence = 1]) ; Parameters ....: $sString - a string value. The string to search inside. ; $sRemove - a string value. The string to search for. ; $iCaseSense - an integer value. Flag to indicate if the operations should be case sensitive. ; $iOccurrence - an integer value. Which occurrence of the substring to find in the string. Use a ; negative occurrence to search from the right side. ; Return values .: Success - String ; Failure - Empty string as returned from StringTrimLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringTrimLeft($sString, $sRemove, $iCaseSense = 0, $iOccurrence = 1) Return (StringTrimLeft($sString, StringInStr($sString, $sRemove, $iCaseSense, $iOccurrence) + StringLen($sRemove) - 1)) EndFunc ;==>_StringTrimLeft Examples:
      ConsoleWrite(_StringRandom(100, 6) & @CRLF) ConsoleWrite(_StringTrimLeft("C:\Windows\System32\cmd.exe", "C:\Windows\System32\") & @CRLF) ConsoleWrite(_StringLeft("C:\Windows\System32\cmd.exe", "cmd.exe") & @CRLF) ConsoleWrite(_FileToFileName("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_FileToFilePath("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_FileToFileExtension("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_StringRandom(6, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(6, 4)& @CRLF)  
    • By nacerbaaziz
      good morning sirs.
      please i have a request from you.
      i have an variable to Read a data from a file
      this data is Encrypted
      and when i read it i Decrypte it.
      for that i need a function to Write a ini data to string.
      ;#Function# ===================================================================================================================== ; Name............: _IniReadFromString ; Description.....: Returns the value of a key in a specific section of an ini-formatted string ; Syntax..........: _IniReadFromString($szInput, $szSection, $szKey, $Default) ; Parameters......: ;   $szInput - The string that contains data in ini format ;   $szSection   - The sectionname (just as in IniRead) ;   $szKey   - The keyname (just as in IniRead) ;   $Default - The default value if the key does not exist or reading failed (just as in IniRead) ; Return values ..: ;   Success  - Returns the read value ;   Failure  - Returns $Default ; Author .........: FichteFoll ; Remarks ........: Works for Unicode as well as for ANSI ; Related ........: IniRead, _IniReadSectionFromString ; Link ...........; See on top ; Example ........; $var = _IniReadFromString(StringFormat("[Sect]\r\nMyKey1=value1\r\nMyKey2=value2"), "Sect", "MyKey2", "no_value") ; =============================================================================================================================== Func _IniReadFromString($szInput, $szSection, $szKey, $Default) $szInput = StringStripCR($szInput) ;~  Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?(",3) Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?", 3) If @error Then Return SetError(1, 0, $Default) ; key not found    Return $aRegMl[0] EndFunc;==>_IniReadFromString ; ############################################################################################################################### ; =============================================== ; = Internal Use Only ; =============================================== Func __StringEscapeRegExp($szExp) Return StringRegExpReplace($szExp, "([\(\)\[\]\{\}\\\/\?\.\\|\+])", "\\$1") ; ()[]{}\/?.|+ EndFunc;==>__StringEscapeRegExp like this  function Read the ini from string.
       
       
      please ihelp me
      thanks in advance
    • By junichironakashima
      I have a windows 10 pc and Im trying to create an automatic solving in calculator with a simple worded question (example: What is 45 x 53 ?). thou I cant make the select...Case...EndSelect statement work, here is my code
      #include <AutoItConstants.au3> HotKeySet("{F4}", "ExitProg") Func ExitProg() Exit 0 EndFunc MouseClick($MOUSE_CLICK_LEFT, 417, 659, 2, 1) Send("^c") Func valData() $Chek = "What " If ClipGet() == $Chek Then Check() Else Do MouseClick($MOUSE_CLICK_LEFT, 417, 659, 2, 3) Send("^c") Sleep(500) Until ClipGet() == $Chek EndIf EndFunc Func Check() $Chek2 = "?" c1() c2() c3() c4() c5() c6() c7() Select Case c1() = $Chek2 ;two MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 474, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c2() = $Chek2 ;three MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 482, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c3() = $Chek2 ;four MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 487, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c4() = $Chek2 ;five MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 495, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c5() = $Chek2 ;six MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 495, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c6() = $Chek2 ;seven MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 509, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c7() = $Chek2 ;eight MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 509, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case Else Exit EndSelect EndFunc Func c1() MouseClick($MOUSE_CLICK_LEFT, 485, 643, 2, 1) Send("^c") EndFunc Func c2() MouseClick($MOUSE_CLICK_LEFT, 493, 644, 2, 1) Send("^c") EndFunc Func c3() MouseClick($MOUSE_CLICK_LEFT, 498, 645, 2, 1) Send("^c") EndFunc Func c4() MouseClick($MOUSE_CLICK_LEFT, 508, 647, 2, 1) Send("^c") EndFunc Func c5() MouseClick($MOUSE_CLICK_LEFT, 514, 645, 2, 1) Send("^c") EndFunc Func c6() MouseClick($MOUSE_CLICK_LEFT, 523, 645, 2, 1) Send("^c") EndFunc Func c7() MouseClick($MOUSE_CLICK_LEFT, 530, 645, 2, 1) Send("^c") EndFunc valData() MouseClick($MOUSE_CLICK_LEFT, 1349, 196, 1, 1) ;clicking the answer in calc Send("^c") Send("{DEL}") MouseClick($MOUSE_CLICK_LEFT, 499, 706, 1, 1) Send("^v") Exit  
    • By nacerbaaziz
      hello sirs,
      i have searched allot about an function that can  read the INI file as a  string
      i mean function to read the ini files from string and not from the file directly.
      i finally found an UDF that do what i want
      but unfortunately all the functions work,  but the function that i want it not working.
      this is the udf
      the function that  i need is _IniReadFromString
      this is the function

      Func _IniReadFromString($szInput, $szSection, $szKey, $Default) $szInput = StringStripCR($szInput) Local $aRegMl = StringRegExp($szInput, "\[" & __StringEscapeRegExp($szSection) & "\]\n+(?:[^\[].*?=.*\n)*" & __StringEscapeRegExp($szKey) & "=(.*)\n?(", 3) If @error Then Return SetError(1, 0, $Default) ; key not found Return $aRegMl[0] EndFunc;==>_IniReadFromString
      i hope that any one can help me
      thank you in advance
      iniex.au3
×
×
  • Create New...