Jump to content

Error: Variable used without being declared


MattX
 Share

Recommended Posts

Some of the workstations that are running this as part of a logon script are getting this error message:

Line 2798 (File "c:\micon\dropbox_detect.exe"):
Error: Variable used without being declared

On the majority of the stations it works fine. The script ( see below ) uses an .ini file and on checking the .ini file is in the location when the script is run. If anyone can point me to the variable that is the cause I would appreciate it.

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Compression=4
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <File.au3>
#include <Array.au3>
$ip = @IPAddress1
$cname = @ComputerName
Global $aUsers = IniReadSection(@ScriptDir & "\users.ini", "Users")
For $Loop = 1 To $aUsers[0][0]
    If @UserName = $aUsers[$Loop][1] Then
                $result = $cname & ", " & $ip & ", " & @UserName & ", " & " Dropbox Install Check Required"
                Call("_INetSmtpMailCom")
        ;MsgBox(0, "User is:", @UserName)
    EndIf
Next
;##################################
; Variables
;##################################
$SmtpServer = "10.20.32.60" ; address for the smtp-server to use - REQUIRED
$FromName = "IT Helpdesk" ; name from who the email was sent
$FromAddress = "matt.####@###.com" ; address from where the mail should come
$ToAddress = "helpdesk@###.com" ; destination address of the email - REQUIRED
$Subject = "Automatic Helpdesk Generated E-mail" ; subject from the email - can be anything you want it to be
$Body = $result ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS
;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 Then $IPPort = 25
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail = ""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc
[/code]

 

Link to comment
Share on other sites

Use Au3Stripper to create a script file where all include files have been expanded and then check line 2798 there.

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to comment
Share on other sites

Ctrl+F7 in SciTE. Tab Au3Stripper, select "Run Au3Stripper before compilation", set parameters to "/Mo"
or add the following lines at the top of your script

#AutoIt3Wrapper_Run_Au3Stripper=y
#Au3Stripper_Parameters=/mo

 

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to comment
Share on other sites

Ctrl+F7 in SciTE. Tab Au3Stripper, select "Run Au3Stripper before compilation", set parameters to "/Mo"
or add the following lines at the top of your script

#AutoIt3Wrapper_Run_Au3Stripper=y
#Au3Stripper_Parameters=/mo

 

small remark  use also with /RSLN

#AutoIt3Wrapper_Run_Au3Stripper=y
#Au3Stripper_Parameters=/MO /RSLN

 

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

  • Developers

small remark  use also with /RSLN

See you posting this now a couple of times, but am not sure what this really helps when trying to find the line for the error?
It "only" replaces @ScriptLineNumber  with the actual number.

Jos

 

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to comment
Share on other sites

  • Developers

@MattX, which version of AutoIt3 are you using?

edit: And how is this line supposed to work?:

Call("_INetSmtpMailCom")

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...