Jump to content
  1. DavidStark

    DavidStark

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DrJohn
      Hello all.  It's me again.
      I've got a ListView with an associated ImageList to display icons.  What I seem to be hung up on is how to keep the ImageList updated to match the ListView as the latter changes.  I thought it was the case that the indices of the items in the ListView and those in the ImageList just needed to match.  So, for example, if I:
      Delete an item from the ListView [_GUICtrlListView_DeleteItem()], and also delete the image at the matching index in the ImageList [_GUIImageList_Remove()]. Then add a new item to the end of the ListView [_GUICtrlListView_AddItem()], and correspondingly add an image at the end of the ImageList [_GUIImageList_AddIcon()] Shouldn't everything stay in sync?
      Here's the code I thought would work:
      #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <FontConstants.au3> #include <WindowsConstants.au3> #include <GuiImageList.au3> Test() func Test() $gui = GUICreate("Test", 400, 300) ; Create ListView $lv = _GUICtrlListView_Create($gui, "", 10, 10, 380, 240, $LVS_DEFAULT) _GUICtrlListView_AddColumn($lv, "Col1", 50) _GUICtrlListView_AddColumn($lv, "Col2", 50) for $i = 0 to 2 $s = StringFormat("%d,1", $i+1) _GUICtrlListView_AddItem($lv, $s, $i) $s = StringFormat("%d,2", $i+1) _GUICtrlListView_AddSubItem($lv, $i, $s, 1) next ; Add ImageList $img_list = _GUIImageList_Create(16, 16, 5, 3) for $i = 0 to 2 $ico = StringFormat("%d.ico", $i+1) _GUIImageList_AddIcon($img_list, $ico) next _GUICtrlListView_SetImageList($lv, $img_list, 1) ; $btn = GUICtrlCreateButton("Test", 10, 260, 60, 30) GUISetState(@SW_SHOW) HotKeySet("^q", Quit) ; Loop until the user exits. while True switch GUIGetMsg() case $GUI_EVENT_CLOSE Exit case $btn ; Remove 2nd list item and image _GUICtrlListView_DeleteItem($lv, 1) _GUIImageList_Remove($img_list, 1) ; Add new item to end of ListView $idx = _GUICtrlListView_AddItem($lv, "foo") _GUICtrlListView_AddSubItem($lv, $idx, "bar", 1) ; Add new image to end of ImageList _GUIImageList_AddIcon($img_list, "5.ico") endswitch wend GUIDelete() endfunc func Quit() Exit endfunc What seems to happen is that when the new item is added to the ListView, its icon is 1.ico (the first item in the ImageList), rather than 5.ico (the newly added item that should be at the end of the ImageList).
      Or do I need to re-create the whole ImageList any time the ListView changes?
      A zip file is attached that contains the script and also the .ico files, for easier testing.
      Thanks!
      /John
      test.zip
    • By UEZ
      This project has been discontinued!
       
      Here a small tool I wrote to update my Sysinternal tools collection without the need to download always the whole package or visiting the site to check for updates. I know that there are several tools available (also some tools written in AutoIt) but here another one for the collection. It was good exercise for me to code it.
       
       
        
       
       
      Some files from cannot be downloaded although they are visible on the web site!
       
      Here the download link of the source code only: AutoIt Sysinternal Tools Synchronizer v0.99.5 build 2020-07-04 beta.7z  (1509 downloads previously)
      -=> Requires AutoIt version 3.3.13.20 or higher / tested on Win8.1 real machine and some VMs: Win7 / Vista / Win10
       
      Compiled exe only: @MediaFire
       
      Just select the Sysinternal Tools folder or create one and press the synchronize button to download the selected items. Click on AutoIt label (near to left upper corner) to open menu.
       
      Special thanks to LarsJ, Melba23 and mesale0077 for their help. 
       
      I've still some ideas to implement which are more gimmick related, so it is not finished yet...
      If you want to add your language please check out #Region Language. Thanks. 
       
      Please report any bug or if you have any suggestions.
       
      The language of the tool tip from each of the executable in the left list view were automatically created using Google translator and weren't checked for correctness.
       
      Br,
      UEZ
    • By DrJohn
      Hi.  Attempting to catch and process a keystroke in a GUI window.  Here's the code:
      ; ---------------------------------------------------------------------- ; | Library includes ; ---------------------------------------------------------------------- #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <GUIListView.au3> #include <WinAPISys.au3> #include <WinAPIvkeysConstants.au3> #include <GuiButton.au3> global $g_MainGUI CreateMainGUI() ; ---------------------------------------------------------------------- func CreateMainGUI() $g_MainGUI = GUICreate("Test", 600, 600, -1, -1) ; $b = _GUICtrlButton_Create($g_MainGUI, "Foo", 10, 10, 100, 30) ; <--- Line #21 $lv = _GUICtrlListView_Create($g_MainGUI, "", 50, 50, 100, 100) ; <--- Line #22 GUISetState(@SW_SHOW, $g_MainGUI) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") do ; until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() endfunc ; ---------------------------------------------------------------------- func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) local $hdr = DllStructCreate($tagNMHDR, $lParam) local $from = HWnd(DllStructGetData($hdr, "hWndFrom")) local $id = DllStructGetData($hdr, "IDFrom") local $event = DllStructGetData($hdr, "Code") ; Exit on [ctrl-Q] if ($event = $LVN_KEYDOWN) then $info = DllStructCreate($tagNMLVKEYDOWN, $lParam) $vkey = DllStructGetData($info, "VKey") if ($vkey = 0x51) and BitAND(_WinAPI_GetKeyState($VK_CONTROL), 0x8000) then ConsoleWrite('[ctrl-Q]' & @CRLF) ; <--- Line #48 _SendMessage($g_MainGUI, $GUI_EVENT_CLOSE) endif endif return $GUI_RUNDEFMSG endfunc There are two things about this code that don't work the way I expected, and I've been unable to figure out why:
      1)
      As it stands, the code creates a GUI window, then a ListView.  If I run it then immediately press ctrl-Q, the keystroke triggers WM_NOTIFY().  I know that because if I run in SciTE, '[ctrl-Q]' appears in the console window, so the ConsoleWrite() call on line #48 must have executed.
      If I comment out the _GUICtrlListView_Create() call on line #22 and uncomment line #21 so that a Button is created instead, then run it, WM_NOTIFY() is never triggered.
      Why the difference?  Doesn't the GUIRegisterMsg() call register WM_NOTIFY on behalf of the parent GUI?  Why does it work with one control type, but not the other?
      2)
      In the case with the ListView control, where it does catch the ctrl-Q, it executes _SendMessage($g_MainGUI, $GUI_EVENT_CLOSE).  In my simple mind, I'd have thought that would send the $GUI_EVENT_CLOSE message to the main GUI and cause it to exit the do/until loop.
      But evidently not?  Because it doesn't.
      Thanks in advance.  Just when I think I understand ...
      /John
    • By Dan_555
      Hi.
      I'm using the FreeCommander XE file manager here, and i'v written a script, which will create an empty, new file, after choosing an extension out from the Listbox.
       
      The listview code  is not mine, iv found the scripts somewhere on this forum. I have no credits in it, because it was intended to be only for my personal use.
      But now, i have a lot of free time, so i remembered that i haven't posted anything on this forum, yet, so here is my first script:
      It should be compiled with the Autoit v3.3.14.3 .
      The compiled exe needs a folder passed as a parameter, so that it know where to create the new file.
      A Listbox is opened, with a selection of available extensions.
      After selecting and doubleclicking (or using the ok button), the script creates a filename (if specified in the config file) with increased numbers (up to 9999).
      If the filename exist, the counter is checking the next number, until the maximum is reached.
      This script uses an ini file for configuration, called "NewFile.ini" which should be in the same folder, as the compiled exe.
      NewFile.au3
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <GuiListView.au3> #include <String.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <EditConstants.au3> #include <GuiEdit.au3> #include <ScrollBarsConstants.au3> Global $test[0][2], $hFile, $cmd = "", $cmdtmp, $tmptxt, $tmpinidir, $filesetting, $MouseX, $MouseY, $UseMouseX, $UseMouseY, $Edit1 Global $aArray[1] = [] $cmdtmp = StringReplace($cmdlineraw, Chr(34), "") If StringLen($cmdtmp) = 2 Then     If StringRight($cmdtmp, 1) = ":" Then         $cmd = $cmdtmp & "\"     EndIf Else     If StringRight($cmdtmp, 1) <> "\" Or StringRight($cmdtmp, 1) <> "/" Then         $cmd = $cmdtmp & "\"     EndIf EndIf If Not FileExists($cmd) Then                    ;Check if the folder exists, display an error message if not !     DisplayReadMe(1)     Exit EndIf If StringLen(@ScriptDir) > 3 And StringRight(@ScriptDir, 1) <> "\" Then     $tmpinidir = @ScriptDir & "\" Else     $tmpinidir = @ScriptDir EndIf Local Const $sFilePath = $tmpinidir & "NewFile.ini" $filesetting = IniRead($sFilePath, "setting", "filename", "MyNewFile") $filesetting = StringReplace($filesetting, ">", " ") ;msgbox (0,"",$filesetting)  ;Debugging If FileExists($sFilePath) Then     $aArray = IniReadSectionNames($sFilePath) ; Read the INI section names. This will return a 1 dimensional array. EndIf $UseMouseX = IniRead($sFilePath, "setting", "UseMouseX", "1") $UseMouseY = IniRead($sFilePath, "setting", "UseMouseY", "0") ; Check if an error occurred. If Not @error Then     ; Enumerate through the array displaying the section names.     Local $count = 0     If FileExists($sFilePath) Then         For $i = 1 To $aArray[0]             $tmp1 = IniRead($sFilePath, $aArray[$i], "1", "none")             If $tmp1 <> "none" And StringLeft($tmp1, 1) = "." Then            ;Extension need to have a dot, or it will be ignored !                 $tmptxt = $tmptxt & $tmp1 & "|" & $aArray[$i] & @CRLF                 $count = $count + 1                                            ;Count how many extensions are added !             EndIf         Next     EndIf     If $count = 0 Then $tmptxt = ".au3|AutoIt 3" & @CRLF & ".txt|Text File" & @CRLF     ;MsgBox($MB_SYSTEMMODAL,"",$tmptxt)     _ArrayAdd($test, $tmptxt, 0, "|", @CRLF) Else                                                            ;Reading the ini failed, create a default array for the extensions     $tmptxt = ".au3|AutoIt 3" & @CRLF & ".txt|Text" & @CRLF     _ArrayAdd($test, $tmptxt, 0, "|", @CRLF) EndIf ;Local $test[5][2] = [['.au3', 'AutoIt'], ['.ahk', 'Auto Hotkey'], ['.txt', 'text'], ['.sdlbas', 'Sdl Basic'], ['.html', 'Webpage']] If $UseMouseX = 1 Then     $MouseX = MouseGetPos(0) Else     $MouseX = -1 EndIf If $UseMouseY = 1 Then     $MouseY = MouseGetPos(1) Else     $MouseY = -1 EndIf $Form1 = GUICreate("Create New File", 210, 247, $MouseX, $MouseY, $WS_CAPTION, $WS_EX_TOOLWINDOW) $List = GUICtrlCreateListView("", 5, 5, 200, 200) _GUICtrlListView_InsertColumn($List, 0, "Extension", 65) _GUICtrlListView_InsertColumn($List, 1, "Description", 115) _GUICtrlListView_AddArray($List, $test) GUICtrlCreateLabel("Example:" & $filesetting & "0000.ext", 5, 205) $Button1 = GUICtrlCreateButton("Ok", 16, 224, 45, 22) $Button3 = GUICtrlCreateButton("ReadMe", 80, 224, 55, 22) $Button2 = GUICtrlCreateButton("Cancel", 150, 224, 45, 22) $cDummy = GUICtrlCreateDummy() GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") While 1     $nMsg = GUIGetMsg()     Switch $nMsg         Case $GUI_EVENT_CLOSE, $Button2             Exit         Case $Button3             DisplayReadMe(0)         Case $Button1, $cDummy             Local $tmptxt = StringSplit(_GUICtrlListView_GetItemTextString($List), "|")[1]             If StringLen($tmptxt) > 0 Then                 Local $fnr = 0, $tmpfile = ""                 While $fnr < 10000                     $tmpfile = $cmd & $filesetting & _StringRepeat("0", 4 - StringLen($fnr)) & $fnr & $tmptxt                     ;MsgBox(0,"",$tmpfile) ; for debugging                     If Not (FileExists($tmpfile)) Then                         $hFile = _WinAPI_CreateFile($tmpfile, 0)                         _WinAPI_CloseHandle($hFile)                         Exit                     EndIf                     $fnr = $fnr + 1                 WEnd             EndIf     EndSwitch WEnd ;================================================================================ Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)     Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView     $hWndListView = $List     If Not IsHWnd($List) Then $hWndListView = GUICtrlGetHandle($List)     $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)     $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))     $iCode = DllStructGetData($tNMHDR, "Code")     Switch $hWndFrom         Case $hWndListView             Switch $iCode                 Case $NM_DBLCLK                     ; Fire the dummy if the ListView is double clicked                     GUICtrlSendToDummy($cDummy)             EndSwitch     EndSwitch     Return $GUI_RUNDEFMSG EndFunc   ;==>WM_NOTIFY Func DisplayReadMe($err)     Local $Form1 = GUICreate("Read Me", 550, 400, 10, 10, BitOR($WS_CAPTION, $WS_THICKFRAME ,$WS_MAXIMIZEBOX))     $Edit1 = GUICtrlCreateEdit("", 0, 0, 549, 399)     GUICtrlSetData(-1, "")     GUISetState(@SW_SHOW)     If $err=1 then         local $txttmp01="Error: Path does not exist"         local $txttmp02="Commandline call was: "         AddText ($txttmp01)         Addtext ($txttmp02 & $cmd & @CRLF & @CRLF)     EndIf     AddText("Instructions:" & @CRLF)     AddText("Displays a selection of available extensions and then creates a new file at the Path's location." & @CRLF & @CRLF & "Usage: NewFile Path")     AddText("Example: NewFile c:\myfolder\" & @CRLF)     AddText("Result: A file with a name 'MyFile0000.ext' will be created at the Path's location.")     AddText("If the filename exists, the number counter will increase, until it finds a free number, up to 9999." & @CRLF)     AddText("Uses a configuration file in the .exe folder named NewFile.ini !" & @CRLF)     AddText("Example of a config file:" & @CRLF)     AddText("[setting]" & @CRLF & "filename=MyFile>")     AddText("UseMouseX=0                ;0 or 1 - position the dialog at the mouse x coordinate - usefull for multi monitor settings !")     AddText("UseMouseY=0                ;0 or 1 - Set this and UseMouseX to spawn the dialog at the mouse coordinates !" & @CRLF)     AddText(";Use > in filename as a space char ! (only needed if you want the space char at the beginning or at the end : in between filename and the number)" & @CRLF)     AddText(";Format for this ini file is:" & @CRLF & ";Name              e.g [Auto It]")     AddText(";extension       e.g 1=.au3" & @CRLF & "; p.s. only 1 extension per section ! the number must be 1" & @CRLF)     AddText("[AutoIt3]" & @CRLF & "1=.au3" & @CRLF & @CRLF & "[Text]" & @CRLF & "1=.txt")     _GUICtrlEdit_SetSel($Edit1, 0, 0)     _GUICtrlEdit_Scroll($Edit1, $SB_SCROLLCARET)     If $err=1 Then         _GUICtrlEdit_SetSel($Edit1, 0, StringLen($txttmp01 & $txttmp02 & $cmd)+5)     EndIf     While 1         $nMsg = GUIGetMsg()         Switch $nMsg             Case $GUI_EVENT_CLOSE                 GUIDelete($Form1)                 ExitLoop         EndSwitch     WEnd EndFunc   ;==>DisplayReadMe Func AddText($edittxt)     _GUICtrlEdit_AppendText($Edit1, $edittxt & @CRLF) EndFunc   ;==>AddText  
       NewFile.ini
      [setting] filename=MyNewFile_ UseMouseX=0                ;0 or 1 - position the dialog at the mouse x coordinate - usefull for multi monitor settings ! UseMouseY=0                ;0 or 1 - Set this and UseMouseX to spawn the dialog at the mouse coordinates ! ;Use > in filename as a space char ! (only needed if you want the space char at the beginning or at the end : in between filename and the number) ;Format for this ini file is: ;Name              e.g [Auto It] ;extension       e.g 1=.au3 ; p.s. only 1 extension per section ! the number must be 1 [AutoIt3] 1=.au3 [Auto Hotkey] 1=.ahk [Text] 1=.txt [Sdl Basic] 1=.sdlbas [Webpage] 1=.html [Basic] 1=.bas [Pascal] 1=.pas [Rich Text (RTF)] 1=.rtf [Word Document] 1=.doc [Hex File] 1=.hex
    • By Irios
      I have several context menus that's been built using _GUICtrlMenu_CreatePopup() and _GUICtrlMenu_AddMenuItem().
      When using _GUICtrlMenu_CreatePopup() it returns the identifier of the clicked item, sure. But it blocks the main loop while the menu is open.
      When using _GUICtrlMenu_CreatePopup($MNS_MODELESS) it returns immediately (of course), but I cannot figure out how/where to read the item that was clicked. Is there a Windows Message (WM) somewhere that is triggered? I've spend an entire day trying to figure out how to do this, but I'm not getting anywhere. My google fu is depleted (I must have tried like hundreds of script variations today), I'm about to smash my keyboard and just go to bed, and abandon the entire endeavor of making pretty menus and go back to using Koda and forget about using menu icons, colors,  etc.
      Anyone wanna help me out with how to read the clicked item? Before I smash my keyboard, please...
       
      Example script here:
       
      #include <GuiMenu.au3> #include <WinAPIError.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> GUIRegisterMsg($WM_CONTEXTMENU, "_WM_CONTEXTMENU") Global $idMenuItem = 10000, $counter = 0 Global $hGUI = GUICreate("Menu test", 400, 300) Global $hListview = GUICtrlCreateListView("", 2, 2, 396, 200) GUISetState(@SW_SHOW) ;~ Global $hMenuContext = _GUICtrlMenu_CreatePopup() Global $hMenuContext = _GUICtrlMenu_CreatePopup($MNS_MODELESS) _GUICtrlMenu_AddMenuItem($hMenuContext, "Menu item", $idMenuItem) Global $hTimer = TimerInit() Do If TimerDiff($hTimer)>200 Then $counter += 1 ConsoleWrite($counter & " " ) $hTimer = TimerInit() EndIf Until GUIGetMsg() = $GUI_EVENT_CLOSE Exit Func _WM_CONTEXTMENU($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $lParam Switch $wParam Case GUICtrlGetHandle($hListview) ConsoleWrite( @CRLF & "_GUICtrlMenu_TrackPopupMenu = " & _GUICtrlMenu_TrackPopupMenu($hMenuContext, $wParam, -1, -1, 1, 1, 2) & @CRLF) EndSwitch EndFunc  
       
×
×
  • Create New...