Jump to content

Recommended Posts

I want to check if the cmd.exe + window of it is running, if it is running I want to put the window to the foreground, but somehow this does not work:
 

Local $sCommandlinePath = "C:\Windows\system32\cmd.exe"

        RunCm()

        Func RunCm()

            If FileExists($sCommandlinePath) Then
                If ProcessExists("cmd.exe") Then
                    If WinExists("[CLASS:ConsoleWindowClass]") And WinActive("[CLASS:ConsoleWindowClass]") Then
                        Local $hCmdWindow = WinGetHandle("[CLASS:ConsoleWindowClass]")
                        WinSetOnTop($hCmdWindow, "", $WINDOWS_ONTOP)
                    EndIf
                Else
                    Local $iCmMax = Run($sCommandlinePath, "", @SW_SHOWMAXIMIZED)
                EndIf
            EndIf

        EndFunc

I started the command line and put another window above it then I started my script and it did not put the command line window to the foreground.

Edited by NiceBoy1234
Link to post
Share on other sites

I do not understand what you are trying to explaining.

You're only calling WinSetOnTop if the window Exists AND the window is already active.

HotKeySet("{F1}", "RunCm")
HotKeySet("{Esc}", "Close")

Local $sCommandlinePath = "C:\Windows\system32\cmd.exe"

While (True)
    Sleep(100)
WEnd

Func RunCm()
    If FileExists($sCommandlinePath) Then
        If ProcessExists("cmd.exe") Then
            If WinExists("[CLASS:ConsoleWindowClass]") and WinActive("[CLASS:ConsoleWindowClass]") Then
                MsgBox("", "", "WinSetOnTop " & (WinSetOnTop("[CLASS:ConsoleWindowClass]", "", 1) = True ? "Succeeded!" : "Failed"))
            Else
                MsgBox("", "", "Cmd.exe does not exist OR Cmd.exe is not already active" & @CRLF & "WinExists: " & WinExists("[CLASS:ConsoleWindowClass]") & @CRLF & "WinActive:" & WinActive("[CLASS:ConsoleWindowClass]"))
            EndIf
        Else
            Local $iCmMax = Run($sCommandlinePath, "", @SW_SHOWMAXIMIZED)
        EndIf
    EndIf

EndFunc   ;==>RunCm

Func Close()
    Exit 0
EndFunc

Sometimes some debugging code helps. I put the return for WinSetOnTop in a message box, if it's True (1) Then it succeeded, otherwise it failed. Also put in an else statement for the If WinExists...WinActive Then to put in a debugging message letting you know why it failed.

Edited by InunoTaishou
Link to post
Share on other sites

Ok I changed it to this now:

HotKeySet("{F1}", "RunCm")
HotKeySet("{Esc}", "Close")

Local $sCommandlinePath = "C:\Windows\system32\cmd.exe"

While (True)
    Sleep(100)
WEnd

Func RunCm()
    If FileExists($sCommandlinePath) Then
        If ProcessExists("cmd.exe") Then
            If WinExists("[CLASS:ConsoleWindowClass]") Then
               WinSetOnTop("[CLASS:ConsoleWindowClass]", "", 1)
               MsgBox("", "", "WinSetOnTop " & (WinSetOnTop("[CLASS:ConsoleWindowClass]", "", 1) = True ? "Succeeded!" : "Failed"))
            Else
               MsgBox("", "", "Cmd.exe does not exist OR Cmd.exe is not already active" & @CRLF & "WinExists: " & WinExists("[CLASS:ConsoleWindowClass]") & @CRLF & "WinActive:" & WinActive("[CLASS:ConsoleWindowClass]"))
            EndIf
        Else
            Local $iCmMax = Run($sCommandlinePath, "", @SW_SHOWMAXIMIZED)
        EndIf
    EndIf

EndFunc   ;==>RunCm

Func Close()
    Exit 0
EndFunc

And works.

Edited by NiceBoy1234
Link to post
Share on other sites

I apologize, I misunderstood. Looking back at your first post you said you wanted it in the foreground. Maybe you didn't mean WinSetonTop? WinSetOnTop just sets the Window to have the TOPMOST status, so it's always on top.

If you want it to have the topmost status then it worked for me if I had cmd active when I pressed the hotkey. If you just want to bring it to the foreground try

DllCall("user32.dll", "int", "SetForegroundWindow", "hwnd", WinGetHandle("[CLASS:ConsoleWindowClass]"))

Or you could use this to bring it to the foreground and it will activate the window

WinActivate("[CLASS:ConsoleWindowClass]")
Edited by InunoTaishou
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nacerbaaziz
      hello guys, please i need your help
      am trying to work with CreateWindowEx api, i created the window with it controls, also i setup the call back function
      i'am using WinMSGLoop to focus with the keyboard.
      here i have a problem, i hope that you can help me.
      on the controls i used the UDF that comme with the autoit, such as _GUIButton_Create, _GUIListBox_Create....
      but i can't find a STATIC control UDF, for that i used this

      local $h_ssrvlbl = _WinAPI_CreateWindowEx(0, "STATIC", "الخادم", BitOr($WS_VISIBLE, $WS_CHILD, $WS_CLIPSIBLINGS, $WS_CLIPCHILDREN), 250, 10, 100, 20, $hWnd)
      as you can see here, there is an arabic text, so here is the problem, the arabic text isn't show normally, what is the problem here?
      also i have  an other question about keyboard focus, when i used WinMSGLoop, it worked, but if i press alt+tab to switch windows or focus an other window and return back to my window, the focus of control is kill.
      can any one help me to solve that please?
      my code will be as file here with the include files
      i hope can any one help me here
      thanks in advance
       
      speed Test win.zip
    • By poddex
      Hello everyone.
      I always try to work with old Windows 10 versions as much as possible because I know mane compatibility issues with Windows 10 upgrading. 
      But I couldn't do anything else (I got drivers problem), and nothing couldn't help me besides upgrading, so I upgraded from 1807 to 1903.
      And...get another problem 😃
      I use AutoitX library in external project like this.
      ObjectAutoIt=New COMObject("AutoItX3.Control");
      ObjectAutoIt.AutoItSetOption("WinTextMatchMode",2);
              While ObjectAutoit.WinExists("",WindowHeader) Cycle 
                  ObjectAutoIt.WinClose("",WindowHeader);
              EndCycle;
      After upgrade I get that this line code 
      While ObjectAutoit.WinExists("",WindowHeader)
      become extremely low - ~ 20 seconds even if 10 windows open. But before upgrade it takes 0.5 s for a max.
      And every time that this code line passes through  - it takes ~20s, (20.115, for example), not less, not more. Something pauses it to work.
      How can I diagnose, what is that?
      I tried reinstall whole AutoIt, but no results.
      Thanks to all.
    • By kingjacob90
      Hi
      So I am trying to click the green button, this button is not always in the same place. So fare I am trying to click it by finding the color but there is also something else with the same color on the screen (circled in yellow) that is causing issues. Is there a way to use the Title and Class of the window (can't be just the window as there are more than one with the same name).
      How does AutoIt Info get this information?

    • By nacerbaaziz
      question about _WinAPI_CreateWindowEx
      good morning
      welcome autoit team
      please i need your help
      i've searched a lot about how to use the _WinAPI_CreateWindowEx
      finally i found an example
      but i found some problem i hope you can help me
      firstly, i want to set the controls focussable with the keyboard input
      i already used the ws_tabStop but it did not work with me.
      secondly, i want to set some access keys linked with the window
      such as control+o enable the open button and control+f4 exit the app
      note: i need a local access keys and not a global hotkeys
      such as GUISetAccelerators
      finaly, before i will put the code here i must clarify a few things.
      1. you will ask me why you don't use the GUICreate function
      here i'll tell you that it as dialog and It is a little heavy in motion with screen readers.
      the screen readers for blind has some function that work with dialogs and others work with full windows style
      2. you will ask me why you didn't search the net for that?
      i will tell you that all examples that i found in the internet with pdfs and Picture books.
      i found some examples in microsoft but it with cpp.
      ok here is the code
      i hope you can help me to do what i want
      thank you in advance
       
      ; Small AutoIt Application that uses Windows API ; Written by Yuraj #NoTrayIcon #include <_RegisterClassEx.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> #include <ButtonConstants.au3> #include <EditConstants.au3> #include <FontConstants.au3> AutoItSetOption("MustDeclareVars", 1) ; Window definitions Const $WinWidth = 370 Const $WinHeight = 350 Const $WinXPos = (@DesktopWidth / 2) - ($WinWidth / 2) Const $WinYPos = (@DesktopHeight / 2) - ($WinHeight / 2) Const $WinTitle = "Win32 Application - Text reader" Const $WinClass = "mainapp" Const $WinIcon = _WinAPI_LoadIcon(_WinAPI_GetModuleHandle("shell32.dll"), 13) ; Windows handles Global $hwnd, $edit1, $btn1, $btn2 ; Fonts Global $fnt1 ; Register class, Create the window Local $retVal = __WinAPI_RegisterClassEx($WinClass, "WindowCallback", $WinIcon, 0, _WinAPI_GetSysColor($COLOR_BTNFACE), BitOR($CS_DEFAULTSTYLE, $CS_DROPSHADOW)) ; If $retVal == 0 Then ; If registerclass fails MsgBox(16, "Error", "Error while registering window class!") Exit EndIf ; Create windows/controls $hwnd = _WinAPI_CreateWindowEx($WS_EX_STATICEDGE, $WinClass, $WinTitle, BitOR($WS_OVERLAPPED,$WS_SYSMENU, $WS_MINIMIZEBOX, $WS_GROUP, $WS_DLGFRAME), $WinXPos, $WinYPos, $WinWidth, $WinHeight, 0) $btn1 = _WinAPI_CreateWindowEx(0, "button", "Open file ...", BitOR($WS_VISIBLE, $WS_CHILD, $WS_TABSTOP, $WS_CLIPCHILDREN), 25, 270, 100, 30,$hwnd) $btn2 = _WinAPI_CreateWindowEx(0, "Button", "Exit", BitOR($WS_VISIBLE, $WS_CHILD, $WS_TABSTOP, $WS_CLIPCHILDREN), 235, 270, 100, 30, $hwnd) $edit1 = _WinAPI_CreateWindowEx(0, "edit", "text", BitOR($WS_VISIBLE, $WS_CHILD, $WS_VSCROLL, $ES_AUTOVSCROLL, $es_readOnly, $WS_TABSTOP), 5, 5, $WinWidth - 15, $WinHeight - 100, $hwnd) ; Set controls identifiers _WinAPI_SetWindowLong($btn1,$GWL_ID,150) _WinAPI_SetWindowLong($btn2,$GWL_ID,160) ; Set (controls) fonts $fnt1 = _CreateFont("MS Sans Serif", 15) _WinAPI_SetFont($btn1, $fnt1) _WinAPI_SetFont($btn2, $fnt1) _WinAPI_SetFont($edit1, $fnt1) ; Set focus to edit _WinAPI_SetFocus($edit1) ; Show window _WinAPI_ShowWindow($hwnd) _WinAPI_UpdateWindow($hwnd) ; Main loop that keep application opened While 1 Sleep(100) WEnd ;=================================================================; ; WINDOW CALLBACK ... ;=================================================================; Func WindowCallback($_hwnd, $iMsg, $wParam, $lParam) Local $iNC, $iID Switch $iMsg ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Case $WM_CLOSE ; Show message on closing If MsgBox(48 + 4, $WinTitle, "Do you want really exit?", 0, $hwnd) <> 6 Then Return 0 ; Call destructor and then exit main thread FinalizeApp() Exit ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Case $WM_COMMAND $iNC = _WinAPI_HiWord($wParam) $iID = _WinAPI_LoWord($lParam) Switch $iNC Case $BN_CLICKED ; When is control clicked Switch _WinAPI_GetDlgCtrlID($iID) Case _WinAPI_GetDlgCtrlID($btn1) BtnOpenFileClick() Case _WinAPI_GetDlgCtrlID($btn2) BtnExitClick() EndSwitch EndSwitch ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; EndSwitch Return _WinAPI_DefWindowProc($_hwnd, $iMsg, $wParam, $lParam) EndFunc ;==>WindowCallback Func FinalizeApp() _WinAPI_DeleteObject($fnt1) _WinAPI_DestroyWindow($hwnd) __WinAPI_UnregisterClass($WinClass) EndFunc ;==>FinalizeApp Func _CreateFont($fontName, $height = 16, $style = $FW_NORMAL, $italic = False, $underline = False, $strikeout = False) Local $hFont = _WinAPI_CreateFont($height, 0, 0, 0, $style, $italic, $underline, $strikeout, $DEFAULT_CHARSET, _ $OUT_DEFAULT_PRECIS, $CLIP_DEFAULT_PRECIS, $DEFAULT_QUALITY, $DEFAULT_PITCH, $fontName) Return $hFont EndFunc ;==>_CreateFont ;=================================================================; ; WINDOW EVENTS ;=================================================================; Func BtnOpenFileClick() Local $ret = _WinAPI_GetOpenFileName("", "Text files (*.txt)|All files (*.*)", ".", "", "", 1, 0, 0, $hwnd) If ($ret[0] > 0) Then Local $path = $ret[1] & "\" & $ret[2] Local $file = _WinAPI_CreateFile($path, 2, 2) Local $buf = DllStructCreate("byte[" & _WinAPI_GetFileSizeEx($file) & "]") Local $i = 0 _WinAPI_ReadFile($file, DllStructGetPtr($buf), _WinAPI_GetFileSizeEx($file), $i) ; Close file handle _WinAPI_CloseHandle($file) _WinAPI_SetWindowText($edit1, BinaryToString(DllStructGetData($buf, 1))) EndIf EndFunc ;==>BtnOpenFileClick Func BtnExitClick() FinalizeApp() Exit EndFunc ;==>BtnExitClick  
      _RegisterClassEx.au3
    • By nacerbaaziz
      hello sirs, please i created a tool witch get the focused control in a window and play a audio file linked with this controls
      e.g buttons, checkBoxes, radios, comboboxes, and others
      i know that their is a function that give us the control focus but it return the classNN
      i want to get the class name to use it with a switch and
      because their are more than class e.g button tbutton timagebutton tnewButton...
      please can any one help me to get the class name not the classnn
      thanks in advance
×
×
  • Create New...