Jump to content

how to close ,quit or exit autoit script .exe files


Recommended Posts

Hi All,

How to quit or exit autoit script .exe file. I have created one script using autoit script finally we converted .exe file. but while executing script , how to close or eixt or quit entire .exe file , if havning any function , please inform me.

 

Thanks,

Sat6804

Link to post
Share on other sites
  • Developers

Under which condition would you want to stop the script?

e.g. Pressing a specific key? ==> HotKeySet()

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites
  • Developers

Is there a question in there and what kind of error are you talking about as AutoIt3 will exit always on any syntax error?

Jos

 

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites

If your editing F5 = GO and CTRL+BREAK stops executing.

You can also create a hotkeyset as noted above. Basically, you put it in your script, identify the key and point it to a simple function. I'll give you an example...

HotKeySet("{ESC}", "Terminate")

Func Terminate()
    Exit
EndFunc   ;==>Terminate

 

Edited by fixitrod
Adding more information. Didn't want to make excessive posts
Link to post
Share on other sites

hi ,

I used the below code, for comparing pdf file and created same code with 50 .exe file , If any error occurs in this below code . how to quit or close or exit  particular auto it .exe file. If any one know answer please share it..

#include <File.au3>
#include <Excel.au3>
#include <MsgBoxConstants.au3>

Func _FindStrInFile($File, $String)
    If Not FileExists($File) Then Return -1
    Local $fOpen = FileOpen($File, 0), $LineCount = 0
    Dim $ret[2]
    While 1
        $LineCount += 1
        $CurrentLine = FileReadLine($fOpen)
        If @error = -1 Then ExitLoop
        If StringInStr($CurrentLine, $String) Then
            $ret[0] = $CurrentLine
            $ret[1] = $LineCount
        EndIf
    WEnd
    Return $ret
EndFunc    ;==>_FindStrInFile

$file1 = "E:\Automation\testing\AutoIT\Report.xls"
Local $oExcel1 = _ExcelBookOpen($file1)
For $j = 16 To 16 ;Loop
    $sCellValue8 = _ExcelReadCell($oExcel1, $j, 8)
Next
_ExcelBookClose($oExcel1)

$file2 = "E:\Automation\testing\Validation.xls"
Local $oExcel2 = _ExcelBookOpen($file2)
_ExcelSheetActivate($oExcel2, "process")

For $j = 2 To 2 ;Loop
    $sCellValue2 = _ExcelReadCell($oExcel2, $j, 3)
Next

For $k = 3 To 3 ;Loop
    $sCellValue3 = _ExcelReadCell($oExcel2, $k, 3)
Next

For $l = 4 To 4 ;Loop
    $sCellValue4 = _ExcelReadCell($oExcel2, $l, 3)
Next

For $m = 5 To 5 ;Loop
    $sCellValue5 = _ExcelReadCell($oExcel2, $m, 3)
Next

For $n = 6 To 6 ;Loop
    $sCellValue6 = _ExcelReadCell($oExcel2, $n, 3)
Next

For $o = 7 To 7 ;Loop
    $sCellValue7 = _ExcelReadCell($oExcel2, $o, 3)
Next
_ExcelBookClose($oExcel2)

If ($sCellValue8 == "completed") Then
    Run("C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe")
    WinWaitActive("Adobe Acrobat Pro", "")
    Send("!V")
    Send("{Down 11}")
    Send("{enter}")
    WinWaitActive("Compare Documents", "")
    Send("!s", "{enter}")
    WinWaitActive("Open", "")
    Sleep(1000)
    Send($sCellValue2)
    Send("!O", "{ENTER}")
    WinWaitActive("Compare Documents", "")
    Send("!e", "{enter}")
    WinWaitActive("Open", "")
    Sleep(1000)
    Send($sCellValue3)
    Send("!O", "{ENTER}")
    WinWaitActive("Compare Documents", "")
    Send("!R", "Check")
    Send("!O", "{enter}")
    Sleep(10000)
    WinWaitActive("[CLASS:AcrobatSDIWindow]", "")
    Send("!F")
    Send("{Down 3}")
    Send("{Right}", "!P")
    Send("{Down 8}")
    Send("{Right}", "!A")
    Send("{Down 8}")
    Send("{enter}")
    Sleep(1000)
    Send($sCellValue4)
    Send("!O")
    Send("{enter}")
    Send("{TAB 2}")
    Send("!S", "{enter}")
    If Send("!Y", "{enter}") Then
    EndIf
    WinWaitActive("[CLASS:AcrobatSDIWindow]", "")
    WinClose("[CLASS:AcrobatSDIWindow]")
    Send("!Y")
    Sleep(1000)
    Send($sCellValue5)
    Send("!O")
    Send("{enter}")
    Send("{TAB 2}")
    Send("!S", "{enter}")
    If Send("!Y", "{enter}") Then
    EndIf


    $String = "Differences exist between documents"
    $File = $sCellValue6
    $read = FileRead($File)

    $FindArr = _FindStrInFile($File, $String)
    If IsArray($FindArr) And $FindArr[0] <> "" Then
        $sFilePath1 = @ScriptDir & $sCellValue7
        If FileExists($sFilePath1) Then ;This file should already exist
            Local $oExcel = _ExcelBookOpen($sFilePath1)
        Else
            Local $oExcel = _ExcelBookNew()
        EndIf


        _ExcelWriteCell($oExcel, "PASS", 16, 11)
        _ExcelWriteCell($oExcel, $read, 16, 10)


        _ExcelBookSaveAs($oExcel, @ScriptDir & $sCellValue7, "xls", 0, 1)

          ; close excel book
        _ExcelBookClose($oExcel)

    ElseIf $FindArr <> -1 Then
        $sFilePath1 = @ScriptDir & $sCellValue7
        If FileExists($sFilePath1) Then ;This file should already exist
            Local $oExcel = _ExcelBookOpen($sFilePath1)
        Else
            Local $oExcel = _ExcelBookNew()
        EndIf

        _ExcelWriteCell($oExcel, "FAIL", 16, 11)
        _ExcelWriteCell($oExcel, $read, 16, 10)

          ; Save file into Script directory; overwrite existing file if necessary
        _ExcelBookSaveAs($oExcel, @ScriptDir & $sCellValue7, "xls", 0, 1)

        _ExcelBookClose($oExcel)
    ElseIf $FindArr = -1 Then
        MsgBox(48, "Results", "The file <" & $File & "> was not found")
    EndIf

Else
    $sFilePath8 = @ScriptDir & $sCellValue7
    If FileExists($sFilePath8) Then ;This file should already exist
        Local $oExcel4 = _ExcelBookOpen($sFilePath8)
    Else
        Local $oExcel4 = _ExcelBookNew()
    EndIf
    _ExcelWriteCell($oExcel4, "FAIL", 16, 11)
    _ExcelWriteCell($oExcel4, "PDFFileNotExist", 16, 10)
    _ExcelBookSaveAs($oExcel4, @ScriptDir & $sCellValue7, "xls", 0, 1)
    _ExcelBookClose($oExcel4)
EndIf

 

Edited by Jos
added codebox
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ThePoro
      Hi everyone.
      I want to ask about this : 
      I want it runs from 1 to 100 and It opens 10 firefox profiles then access youtube. After I close a firefox window, the loop runs and wait for another window close until loop ends
      I have a loop like this.
      Func launch() Local $from = Int(GUICtrlRead($input1)) Local $to = Int(GUICtrlRead($input2)) If $to <> "" Then While $from <= $to Local $profile = $to _RunDos("start firefox.exe -p " & $profile & " -no-remote youtube.com") $to=$to+1 WEnd Else Local $profile = $to _RunDos("start firefox.exe -p " & $profile & " -no-remote youtube.com") EndIf EndFunc Is there any solution?
      Thank you!
    • By rudi
      Hello,
      Either drag drop the opened file on the server and the temp file, Aut2Exe could not copy to the destination file, as that one is opened, to the edits of this GUI, or take the Aut2Exe error message line to your clipboard, the line will be split automatically.
      This script does not check
      For the required rights to the destination folder (to close open file handles) for correct input Use either clipboard (Aut2Exe message), drag & drop, or copy the full paths of source and destination file *IN ONE* (don't type, if you want to do so, modify the script, for me it's fine this way ;-)  
      Example Error Message:
      !>11:19:15 Problem copying file from: C:\Users\UserName\AppData\Local\AutoIt v3\Aut2exe\~AU98E6.tmp.exe To :z:\MyAutoitExeForTheUsers.exe
      #include <GUIConstantsEx.au3> #include <NetShare.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <EditConstants.au3> ; Enumerate open files on the server $DragDropOpenFile = "<drag drop the opened file on a server share here>" $DragDropNewFile = "<drag drop the file supposed to replace the above one here>" $NewFile = "" $Gui_h = 250 $Gui_w = 800 $vDist = 7 ; GUICreate($GuiTitle, $w, $h, @DesktopWidth - $w - 100, @DesktopHeight - $h - 60, -1, $WS_EX_ACCEPTFILES) ; generally enable drag-drop for files into other GUI controls $myGui = GUICreate("Tool to forcibly close & replace open files on server shares", $Gui_w, $Gui_h, 100, 100, -1, $WS_EX_ACCEPTFILES) $InputFileToClose = GUICtrlCreateInput($DragDropOpenFile, 20, $vDist, $Gui_w - 40, 20) GUICtrlSetState(-1, $GUI_DROPACCEPTED) ; allow drag-droping files for this control, $InputFile Opt("Guicoordmode", 2) $InputFileNew = GUICtrlCreateInput($DragDropNewFile, -1, $vDist) GUICtrlSetState(-1, $GUI_DROPACCEPTED) ; allow drag-droping files for this control, $InputFile GUICtrlSetState(-1, $GUI_DISABLE) $lServer = GUICtrlCreateLabel("<server>", -1, $vDist) $lShare = GUICtrlCreateLabel("<share-mapping>", -1, $vDist) $lPath = GUICtrlCreateLabel("<sub-path>", -1, $vDist) $lFile = GUICtrlCreateLabel("<file>", -1, $vDist) $doit = GUICtrlCreateButton("Search and close for open file handles", -1, $vDist) GUICtrlSetState(-1, $GUI_DISABLE) $exit = GUICtrlCreateButton("Cancel", -1, $vDist) GUISetState() $FN = False $FNnew = "" $FNmatch = False $ToolTitle = "" $ToolTxt = "" $RegExA2E = "(?i)^(?:.*?Problem copying file from: )(.*?)(?: To :)(.*$)" ; $1 = compiled local TEMP file, $2 = not replacable destination file ; Examle Replacement failed output: !>11:19:15 Problem copying file from: C:\Users\USERNAME\AppData\Local\AutoIt v3\Aut2exe\~AU98E6.tmp.exe To :z:\MyAutoitExeForTheUsers.exe While 1 $Clip = ClipGet() If StringRegExp($Clip, $RegExA2E) Then $Src = StringRegExpReplace($Clip, $RegExA2E, "$2") GUICtrlSetData($InputFileToClose, $Src) $Dst = StringRegExpReplace($Clip, $RegExA2E, "$1") GUICtrlSetData($InputFileNew, $Dst) EndIf $input = GUICtrlRead($InputFileToClose) If $input <> $DragDropOpenFile Then ; da wurde was reingezogen $DragDropOpenFile = $input If StringLeft($input, 2) = "\\" Then $Type = "UNC" $ServerShareUNC = StringLeft($input, StringInStr($input, "\", 0, 4) - 1) $fRelPathFN = StringReplace($input, $ServerShareUNC, "") $fPath = StringLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) $FN = StringTrimLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) ElseIf StringMid($input, 2, 1) = ":" Then ; Pfad mit Laufwerksbuchstabe, evtl. Netzwerk Mapping (erforderlich) $drive = StringLeft($input, 2) $Type = DriveGetType($drive) If $Type = "Network" Then $ServerShareUNC = DriveMapGet($drive) $foo = StringReplace($input, $drive, $ServerShareUNC) ; Laufwerkspfad in UNC Pfad umwandeln $fRelPathFN = StringReplace($foo, $ServerShareUNC, "") $fPath = StringLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) $FN = StringTrimLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) Else MsgBox(48, @ScriptLineNumber, "This script can *ONLY* close remotely handles for files open on server shares!" & @CRLF & _ $input & @CRLF & _ $drive & " = " & $Type) ContinueLoop 2 EndIf EndIf $Server = StringLeft($ServerShareUNC, StringInStr($ServerShareUNC, "\", 0, 3) - 1) $Share = StringTrimLeft($ServerShareUNC, StringInStr($ServerShareUNC, "\", 0, 3) - 1) GUICtrlSetData($lServer,"Server = '" & $Server& "'") GUICtrlSetData($lShare, "Mapping = '" & $Share & "'") GUICtrlSetData($lPath, "SubPath = '" &$fPath & "'") GUICtrlSetData($lFile, "FileName= '" & $FN &"'") GUICtrlSetState($doit, $GUI_ENABLE) GUICtrlSetState($InputFileNew, $GUI_ENABLE) EndIf If $NewFile <> GUICtrlRead($InputFileNew) Then $NewFile = GUICtrlRead($InputFileNew) If $NewFile <> $DragDropNewFile Then If StringInStr($NewFile, $DragDropNewFile) Then $NewFile = StringReplace($NewFile, $DragDropNewFile, "") GUICtrlSetData($InputFileNew, $NewFile) EndIf $FNnew = StringTrimLeft($NewFile, StringInStr($NewFile, "\", 0, -1)) If $FN = $FNnew Then If $FNmatch = False Then $FNmatch = True GUICtrlSetData($doit, "Search for & Close open file handles, then replace file") EndIf Else If $FNmatch Then $FNmatch = False GUICtrlSetData($doit, "Search for & Close open file handles, then replace file") GUICtrlSetData($InputFileNew, $DragDropNewFile) EndIf EndIf EndIf EndIf Switch GUIGetMsg() Case $exit, $GUI_EVENT_CLOSE GUIDelete($myGui) Exit Case $doit AbArbeiten($Server, $Share, $fPath, $FN) EndSwitch WEnd Func AbArbeiten($_Srv, $_Shr, $_fPth, $_fNme) Local $iID = 0 Local $iRights = 1 Local $iLckCount = 2 Local $iFPFN = 3 Local $iUser = 4 ConsoleWrite($_fPth & $_fNme & @CRLF) Local $aFile = _Net_Share_FileEnum($_Srv) If IsArray($aFile) Then ; _ArrayDisplay($aFile) Local $x $ToolTxt = "Open File Handles:" $ToolTitle = "Handles to be checked total: " & $aFile[0][0] UpdateToolTip() AdlibRegister(UpdateToolTip, 1000) For $x = $aFile[0][0] To 1 Step -1 $ToolTitle = $x & " handles remaining for checking..." If Not StringInStr($aFile[$x][$iFPFN], $_fPth & $_fNme) Then ; ConsoleWrite("Nix Enthalten in: " & $aFile[$x][$iFPFN] & @CRLF) _ArrayDelete($aFile, $x) Else $ToolTxt &= @CRLF & $aFile[$x][$iFPFN] & ", User = " & $aFile[$x][$iUser] ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $ToolTxt = ' & $ToolTxt & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console EndIf Next $aFile[0][0] = UBound($aFile) - 1 _ArraySort($aFile, 0, 1, 0, $iUser) ; _ArrayDisplay($aFile, $aFile[0][0] & " FileLocks found.") If $aFile[0][0] = 0 Then $ToolTitle = "Done, no open file handles were found" $ToolTxt &= @CRLF & ", no handles to be closed for this file!" Sleep(2000) $ToolTxt = "" ReplaceFile() Else $ToolTitle = $aFile[0][0] & " open file handles were found..." $CloseErr = 0 For $x = 1 To $aFile[0][0] If _Net_Share_FileClose($Server, $aFile[$x][$iID]) Then $ToolTxt &= @CRLF & @TAB & "Handle closed: " & $aFile[$x][$iID] Else $ToolTxt &= @CRLF & "ERROR: Handle Close Failed! --> " & $aFile[$x][$iFPFN] & ", User = " & $aFile[$x][$iUser] $CloseErr += 1 EndIf Next ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $CloseErr = ' & $CloseErr & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console If $CloseErr = 0 Then $ToolTitle = "All found open file handles could be closed." ReplaceFile() Else $ToolTitle = $CloseErr & " Handles could *NOT* be closed!" Sleep(2000) EndIf Sleep(1000) $ToolTxt = "" $ToolTitle = "" EndIf Else MsgBox(0, "not an array", $aFile & @CRLF & @error & @CRLF & @extended & @CRLF & _ "Unable to retrieve the array of open file handles for " & $Share) EndIf EndFunc ;==>AbArbeiten Func UpdateToolTip() ToolTip($ToolTxt, MouseGetPos(0) + 20, MouseGetPos(1) + 20, $ToolTitle) ; ConsoleWrite( $ToolTxt & @CRLF & $ToolTitle & @CRLF & "-------------------" & @CRLF) EndFunc ;==>UpdateToolTip Func ReplaceFile() If FileExists($NewFile) Then If FileCopy($NewFile, $input, 1 + 8) Then $ToolTitle = "File successfully replaced." $ToolTxt = "Done" Else $ToolTitle = "File could *NOT* be replaced." $ToolTxt = "Possibly another open file handle spawned while this script was running." & @CRLF & _ "Simply start over again, please." MsgBox(48, $ToolTitle, $ToolTxt) EndIf EndIf EndFunc ;==>ReplaceFile  
    • By Miliardsto
      Hello I got problem with final program .exe closing on windows 7 ultimate 64bit. It starts , icon shows on toolbar and program exit.
      I have seen things like that before but it was caused by AV. There is no AV and UAC and firewall off.
      Maybe is there needed any microsoft library or etc or whatever?
       
    • By XinYoung
      For fun, I'm building an app that opens a webpage and refreshes it every 30 seconds.
      But once the script performs _IEAction($oIE, "refresh"), the GUI closes.
      Any help is appreciated.
       

      #include <ButtonConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <WinAPIFiles.au3>
      #include <Array.au3>
      #include <File.au3>
      #include <Excel.au3>
      #include <DateTimeConstants.au3>
      #include <MsgBoxConstants.au3>
      #include <WinAPIShellEx.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <ComboConstants.au3>
      #include <guimenu.au3>
      #include <IE.au3>
      HotKeySet("{F4}", "_Exit")
      ;Open the file(s) in the selected folder
      $extension = ".txt"
      $app2openWith = @SystemDir & "\notepad.exe"
      Func Begin()
          Global $loopTrick = 0
          #Region ### START Koda GUI section ### Form=c:\users\mchu\downloads\autoit\my code\form1.kxf
          Global $UI = GUICreate("Hit Em Up!", 256, 113, -1, -1)
          GUISetBkColor(0x000000)
          $menu = _GUICtrlMenu_GetSystemMenu($UI)
          _GUICtrlMenu_EnableMenuItem($menu, $SC_CLOSE, 1, False)
          Global $url = GUICtrlCreateInput("https://www.youtube.com/watch?v=dQw4w9WgXcQ", 81, 8, 160, 21)
          $Label1 = GUICtrlCreateLabel("Target:", 16, 8, 55, 17)
          GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
          GUICtrlSetColor(-1, 0x00FF00)
          Global $StartBut = GUICtrlCreateButton("Start", 16, 40, 67, 25)
          GUICtrlSetFont(-1, 13, 800, 0, "MS Sans Serif")
          GUICtrlSetBkColor(-1, 0x008000)
          $Label2 = GUICtrlCreateLabel("(Press F4 to Exit)", 96, 40, 8000, 17)
          GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
          GUICtrlSetColor(-1, 0x00FF00)
          GUISetState(@SW_SHOW)
          #EndRegion ### END Koda GUI section ###
          While 1
              $UIfunc = GUIGetMsg()
              Select
                  Case $UIfunc = $GUI_EVENT_CLOSE
                      _Exit()
                  Case $UIfunc = $StartBut
                      If GUICtrlRead($url) = "" Then
                          MsgBox(48, "Um...", "Give me a target you idiot.")
                      Else
                          GUICtrlSetState($url, $GUI_DISABLE)
                          GUICtrlSetState($StartBut, $GUI_DISABLE)
                          Start()
                      EndIf
              EndSelect
          WEnd
      EndFunc   ;==>Begin
      Func Start()
          If $loopTrick = 0 Then
              Global $oIE = _IECreate(GUICtrlRead($url))
              _IELoadWait($oIE)
              Again()
          ElseIf $loopTrick = 1 Then
              Sleep(3000)
              _IEAction($oIE, "refresh")
              Sleep(3000)
              Start()
          EndIf
      EndFunc   ;==>Start
      Func Again()
          $loopTrick = 1
          Start()
      EndFunc   ;==>Again
      Func _Exit()
          Exit
      EndFunc   ;==>_Exit
    • By NassauSky
      Hi all,
       
      Anyone have any idea how to close all open tabs except a specific one I manually open.  Assuming I don't know what is open in all the tabs except just the one I want to keep open.
       
      I didn't want to use sendkeys and I was trying to use the following code to list the title (or url) of the 3 open tabs and  after I got that part working I would just close the other 2. This sample only displays the title of the first open tab
      #include <IE.au3> Const $ie_new_in_tab = 0x0800 $oIE = _IECreate("https://www.autoitscript.com") __IENavigate($oIE, "https://www.autoitscript.com/forum/", 1, $ie_new_in_tab) ;(obj,url,wait,param) __IENavigate($oIE, "https://www.google.com/", 1, $ie_new_in_tab) ;(obj,url,wait,param) Local $aIE[1] $aIE[0] = 0 Local $i = 1, $oIE While 1     $oIE = _IEAttach("", "instance", $i)     If @error = $_IEStatus_NoMatch Then ExitLoop     ConsoleWrite(_IEPropertyGet($oIE, "title") & @CRLF)     ReDim $aIE[$i + 1]     $aIE[$i] = $oIE ;each item holds object     $aIE[0] = $i ;first item holds count     $i += 1 WEnd MsgBox($MB_SYSTEMMODAL, "Browsers Found", "Number of browser instances in the array: " & $aIE[0]) ; This doesn't return the list of tabs in the console just the first tab  
      Thanks for any and all help
×
×
  • Create New...