Jump to content

GUI contaminated by closing child GUI


Recommended Posts

Trying to isolate the cause of my parent GUI's graphic becoming contaminated by closing of a child GUI.

The example script below creates the parent GUI, then I click a button to display a digital clock, I use keys to start, pause & resume the clock. NOTE: to exit the clock display after the clock has started hold down the 'ESC' key for more than 3seconds. Upon the clock closing the contamination should be evident.

2016-03-08-GUI_Rubbish.jpg

 

#include <Misc.au3>
#include <GUIConstants.au3>
#include <Date.au3>

HotKeySet("{ESC}", "_ExitClock");To Exit Digital Clock use "Esc" key held for >3sec

Dim $aXY[2]
Global $Init0, $PausedTimer, $iTimerHours, $iTimerMins, $iTimerSecs
Global $sec = @SEC
Global $hDLL = DllOpen("user32.dll")
Global $iEvent = 0
Global $AlarmHour = 0
Global $AlarmMin = 0
Global $AlarmSec = 0
Global  $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
Global  $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
Global  $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
Global $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time
Global $gui
Dim $aDigChar[14]
_initDigChar($aDigChar)

; Create a GUI with various controls.
Local $Form1 = GUICreate("Example")

Local $StartB = GUICtrlCreateButton("Use 'Alt+S' to start Clock", 130, 200, 150, 25)
Local $PauseB = GUICtrlCreateButton("Use 'Alt+P' to pause Clock", 130, 250, 150, 25)
Local $ResumeB = GUICtrlCreateButton("Use 'Alt+R' to resume Clock", 130, 300, 150, 25)
GUICtrlSetState($StartB, $GUI_DISABLE)
GUICtrlSetState($PauseB, $GUI_DISABLE)
GUICtrlSetState($ResumeB, $GUI_DISABLE)

Local $OK = GUICtrlCreateButton("Display Clock", 270, 370, 125, 25)

; Display the GUI.
GUISetState(@SW_SHOW, $Form1)

; Loop until the user exits.
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $idOK
            ExitLoop
        Case $OK
            _DigitalClock()

    EndSwitch
WEnd

; Delete the previous GUI and all controls.
GUIDelete($Form1)


Func _DigitalClock()
    $gui = GUICreate("Digital Timer", 702, 40, -1, -1, -1, $WS_EX_TOPMOST)
    ;$gui = GUICreate("Test", 702, 702)
    GUISetBkColor(0x000000)

    GUISetState()


    $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time




    Dim $msg[1]
    ;$AddMinutes = 10
    While 1
        ; main loop, waits until @sec changes and then executes main drawing management function
        While @SEC = $sec
            $msg = GUIGetMsg(1)
            If $msg[0] = -3 Then
                DllClose($hDLL)
                Return
            EndIf
            If _IsPressed("12", $hDLL) Then;'Alt'
                ConsoleWrite("_IsPressed - Alt Key was pressed." & @CRLF)

                ; Wait until key is released.
                    While _IsPressed("12", $hDLL);
                        If _IsPressed("53",$hDLL) Then;'s'
                            ConsoleWrite("_IsPressed - 'o' Key was pressed." & @CRLF)

                            start_timer()
                        EndIf
                        If _IsPressed("50",$hDLL) Then;'p'
                            ConsoleWrite("_IsPressed - 'p' Key was pressed." & @CRLF)
                            pause_timer()
                        EndIf
                        If _IsPressed("52",$hDLL) Then;'r'
                            ConsoleWrite("_IsPressed - 'r' Key was pressed." & @CRLF)
                            resume_timer()
                        EndIf
                        Sleep(300);(250)
                    WEnd
            ElseIf _IsPressed("1B", $hDLL) Then
                MsgBox($MB_SYSTEMMODAL, "_IsPressed", "The Esc Key was pressed, therefore we will close the application.")
                ExitLoop
            EndIf

            Sleep(10)

        WEnd

        _draw()
        Sleep(50)
        $sec = @SEC
    WEnd
EndFunc; ==> _DigitalCLock


Func _ExitClock();Press Escape key for >5sec
    Local $Count = 0
    If _IsPressed("1B",$hDLL) Then
        $Return = _KeyPressed("1B", $Count)
        ConsoleWrite("Escape Key Held for - " & $Return & "mS" & @CRLF)
        If $Return > 3000 Then
            DllClose($hDLL)
            AdlibUnRegister("show_timer")
            GUIDelete($gui)
            GUISetState(@SW_ENABLE, $Form1);enable parent GUI
            GUISetState(@SW_SHOW,$Form1)
        EndIf
    Endif
EndFunc;==>_ExitClock()

Func _KeyPressed($kp_Key, ByRef $kp_Count)
    $kp_Count += 1
    Local $kp_Timer = TimerInit()
    While _IsPressed("1B")
        Sleep(100)
    WEnd
    Return TimerDiff($kp_Timer)
EndFunc   ;==>_KeyPressed


;################ Functions from StopwatchUDF.au3 #####################
; The function that starts or resets the stopwatch
Func start_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $PausedTimer = 0
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)


EndFunc   ;==>start_timer

; The function that pauses the stopwatch
Func pause_timer()
   HotKeySet("{NUMPADSUB}") ;disable pause timer
   HotKeySet("{NUMPADMULT}", "resume_timer") ;enable resume timer
   $PausedTimer += Int(TimerDiff($Init0))
   AdlibUnRegister()
EndFunc   ;==>pause_timer

; The function that resumes the stopwatch
Func resume_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)
EndFunc   ;==>resume_timer

Func show_timer()     ; _TicksToTime to get hours, mins, seconds
   _TicksToTime(Int(TimerDiff($Init0) + $PausedTimer), $iTimerHours, $iTimerMins, $iTimerSecs)

   ;StringFormat to display the time as HH:MM:SS
   ;ToolTip("HH:MM:SS = " & StringFormat("%02i:%02i:%02i", $iHours, $iMins, $iSecs), 0, 0, "Timer")
EndFunc   ;==>show_timer

; Exit
Func Quit()
   Exit
EndFunc   ;==>Quit
;################ Functions from StopwatchUDF.au3 #####################

Func _draw($forceDraw = False)
    ; calculates angles for min/sec dials, manages execution of drawing routines
    Local $doDraw = False

    Sleep(25)
    ;_drawSec()
    _DrawClock()
    _DrawTimer();Digital Cue Timer 00:00:00
    _DrawAlarmTime($iEvent);Event no. in Sequence with Hints in test string
    GUICtrlSetGraphic($SecSquare, $GUI_GR_REFRESH)
EndFunc   ;==>_draw
;#cs
Func _DrawClock();Digital System Time
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($ClockSquare)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);5, 5, 200, 30
    _timeWrite(0, Int(@HOUR / 10), "regular", $ClockSquare);e.g. 1pm = 13 /10 =1
    _timeWrite(20, Mod(@HOUR, 10), "regular", $ClockSquare);e.g. 1pm = 13Mod10 = 1 with 3 remainder
    _timeWrite(50, Int(@MIN / 10), "regular", $ClockSquare)
    _timeWrite(70, Mod(@MIN, 10), "regular", $ClockSquare)
    _timeWrite(100, Int(@SEC / 10), "regular", $ClockSquare)
    _timeWrite(120, Mod(@SEC, 10), "regular", $ClockSquare)
EndFunc   ;==>_drawTime
;#ce
Func _DrawTimer();Digital Cue Timer 00:00:00
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($TimerSquare)
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    _timeWrite(0, 13, "Timer", $TimerSquare);C
    _timeWrite(20, 11, "Timer", $TimerSquare);L
    _timeWrite(50, 12, "Timer", $TimerSquare);-
    _timeWrite(80, Int($iTimerHours / 10), "Timer", $TimerSquare)
    _timeWrite(100, Mod($iTimerHours, 10), "Timer", $TimerSquare)
    _timeWrite(130, Int($iTimerMins / 10), "Timer", $TimerSquare)
    _timeWrite(150, Mod($iTimerMins, 10), "Timer", $TimerSquare)
    _timeWrite(180, Int($iTimerSecs / 10), "Timer", $TimerSquare)
    _timeWrite(200, Mod($iTimerSecs, 10), "Timer", $TimerSquare)

EndFunc   ;==>_drawTime
;#cs
Func _drawAlarmTime($iEvent);Digital Time
    ;Return
    ; manages execution of write commands for HH MM SS characters for the Alarm time
    GUICtrlDelete($AlarmSquare)
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30)
    _timeWrite(0, 10, "Alarm", $AlarmSquare);A
    _timeWrite(20, 11, "Alarm", $AlarmSquare);L
    _timeWrite(50, 12, "Alarm", $AlarmSquare);-
    _timeWrite(80, Int($AlarmHour / 10), "Alarm", $AlarmSquare)
    _timeWrite(100, Mod($AlarmHour, 10), "Alarm", $AlarmSquare)
    _timeWrite(130, Int($AlarmMin / 10), "Alarm", $AlarmSquare)
    _timeWrite(150, Mod($AlarmMin, 10), "Alarm", $AlarmSquare)
    _timeWrite(180, Int($AlarmSec / 10), "Alarm", $AlarmSquare)
    _timeWrite(200, Mod($AlarmSec, 10), "Alarm", $AlarmSquare)
EndFunc   ;==>_drawAlarmTime
;#ce
Func _timeWrite($pos, $num, $type, $graph) ; $type is "Regular" or "Alarm" or "Timer"
    ; manages coloring and writing of 7 segement LEDs for time writing

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 1, 1), $type);0
    _line($graph, $pos + 5, 2, $pos + 3, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 2, 1), $type);1
    _line($graph, $pos + 2, 14, $pos + 0, 22)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 3, 1), $type);2
    _line($graph, $pos + 5 + 2, 0, $pos + 5 + 8, 0)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 4, 1), $type);3
    _line($graph, $pos + 2 + 2, 12, $pos + 2 + 8, 12)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 5, 1), $type);4
    _line($graph, $pos + 2, 24, $pos + 8, 24)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 6, 1), $type);5
    _line($graph, $pos + 5 + 10, 2, $pos + 3 + 10, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 7, 1), $type);6
    _line($graph, $pos + 2 + 10, 14, $pos + 10, 22)
EndFunc   ;==>_timeWrite

;#cs
Func _line($graph, $x1, $y1, $x2, $y2);Seven Segment Display
    ;Return
    ; draws line for time writing
    GUICtrlSetGraphic($graph, $GUI_GR_MOVE, $x1 + 2, $y1 + 2)
    GUICtrlSetGraphic($graph, $GUI_GR_LINE, $x2 + 2, $y2 + 2)
EndFunc   ;==>_line
;#ce
Func _setColorAndPenForWrite($char, $type)
    ; sets color and pen for next line in time writing, based on '0' or '1' in the DigChar array
    If $char = "1"  Then;7 Segment display ON=1 or OFF=0
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0xCCCCCC, 0xCCCCCC)
        ElseIf $type = "Timer" Then
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x00ff00, 0x00ff00);ct - Bright Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0xEE0000, 0xEE0000)
        EndIf
    Else
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0x222222, 0x222222)
        ElseIf $type = "Timer" Then;ct
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x002200, 0x002200);ct - Lite Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0x330000, 0x330000)
        EndIf
    EndIf
EndFunc   ;==>_setColorAndPenForWrite

Func _drawSec()
    Return
    ; draws circle seconds indicator
    $aXY = _getXY(@SEC, 240)
    GUICtrlDelete($SecSquare)
    $SecSquare = GUICtrlCreateGraphic(350 + $aXY[0] - 8, 350 + $aXY[1] - 8, 16, 16)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_COLOR, 0x0000FF, 0x0000FF)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_ELLIPSE, 0, 0, 16, 16)
EndFunc   ;==>_drawSec

Func _getXY($sec, $hypo)
    ; returns array with X,Y coordinates for the seconds points for $sec seconds, with $hypo(tenuse) distance from center
    Dim $result[2]
    Local $pi = 3.14159265358979
    Local $degToRad = $pi / 180
    Local $degrees = $sec * 6 - 90
    Local $x = Cos($degrees * $degToRad) * $hypo
    Local $y = Sin($degrees * $degToRad) * $hypo
    $result[0] = $x
    $result[1] = $y
    Return $result
EndFunc   ;==>_getXY


Func _initDigChar(ByRef $aDigChar)
    ; define leds for digital numbers: 1 or 0 for leds on/off in 7-led digital clock characters
    $aDigChar[0] = "1110111"
    $aDigChar[1] = "0000011"
    $aDigChar[2] = "0111110"
    $aDigChar[3] = "0011111"
    $aDigChar[4] = "1001011"
    $aDigChar[5] = "1011101"
    $aDigChar[6] = "1111101"
    $aDigChar[7] = "0010011"
    $aDigChar[8] = "1111111"
    $aDigChar[9] = "1011111"
    $aDigChar[10] = "1111011" ; A
    $aDigChar[11] = "1100100" ; L
    $aDigChar[12] = "0001000" ; -
    $aDigChar[13] = "1110100" ;C
EndFunc   ;==>_initDigChar

Any help appreciated

Thanks Chris

Edited by VenusProject2
Link to comment
Share on other sites

  • Moderators

VenusProject2,

You were exiting the clock within the _ExitClock function which was called by a HotKey. This function deleted the clock GUI, but did not affect the loop inside the _DigitalClock function, so the _draw function was still called and, as the only GUI left was the main one, that is where the function drew the clock.

I suggest you use a flag to show when the clock has been killed in the HotKey function and look for that flag in the loop - like this:

#include <Misc.au3>
#include <GUIConstants.au3>
#include <Date.au3>

Opt("TrayIconDebug", 1)

Global $fClose = False

HotKeySet("{ESC}", "_ExitClock");To Exit Digital Clock use "Esc" key held for >3sec

Dim $aXY[2]
Global $Init0, $PausedTimer, $iTimerHours, $iTimerMins, $iTimerSecs
Global $sec = @SEC
Global $hDLL = DllOpen("user32.dll")
Global $iEvent = 0
Global $AlarmHour = 0
Global $AlarmMin = 0
Global $AlarmSec = 0
Global  $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
Global  $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
Global  $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
Global $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time
Global $gui
Dim $aDigChar[14]
_initDigChar($aDigChar)

; Create a GUI with various controls.
Local $Form1 = GUICreate("Example")

Local $StartB = GUICtrlCreateButton("Use 'Alt+S' to start Clock", 130, 200, 150, 25)
Local $PauseB = GUICtrlCreateButton("Use 'Alt+P' to pause Clock", 130, 250, 150, 25)
Local $ResumeB = GUICtrlCreateButton("Use 'Alt+R' to resume Clock", 130, 300, 150, 25)
GUICtrlSetState($StartB, $GUI_DISABLE)
GUICtrlSetState($PauseB, $GUI_DISABLE)
GUICtrlSetState($ResumeB, $GUI_DISABLE)

Local $OK = GUICtrlCreateButton("Display Clock", 270, 370, 125, 25)

; Display the GUI.
GUISetState(@SW_SHOW, $Form1)

; Loop until the user exits.
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $idOK
            ExitLoop
        Case $OK
            _DigitalClock()

    EndSwitch
WEnd

; Delete the previous GUI and all controls.
GUIDelete($Form1)


Func _DigitalClock()
    $gui = GUICreate("Digital Timer", 702, 40, -1, -1, -1, $WS_EX_TOPMOST)
    ;$gui = GUICreate("Test", 702, 702)
    GUISetBkColor(0x000000)

    GUISetState()


    $SecSquare = GUICtrlCreateGraphic(0, 0, 0, 0)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);Local Time
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30);Alarm Time




    Dim $msg[1]
    ;$AddMinutes = 10
    While 1
        ; main loop, waits until @sec changes and then executes main drawing management function
        While @SEC = $sec
            $msg = GUIGetMsg(1)
            If $msg[0] = -3 Then
                DllClose($hDLL)
                Return
            EndIf
            If _IsPressed("12", $hDLL) Then;'Alt'
                ConsoleWrite("_IsPressed - Alt Key was pressed." & @CRLF)

                ; Wait until key is released.
                    While _IsPressed("12", $hDLL);
                        If _IsPressed("53",$hDLL) Then;'s'
                            ConsoleWrite("_IsPressed - 'o' Key was pressed." & @CRLF)

                            start_timer()
                        EndIf
                        If _IsPressed("50",$hDLL) Then;'p'
                            ConsoleWrite("_IsPressed - 'p' Key was pressed." & @CRLF)
                            pause_timer()
                        EndIf
                        If _IsPressed("52",$hDLL) Then;'r'
                            ConsoleWrite("_IsPressed - 'r' Key was pressed." & @CRLF)
                            resume_timer()
                        EndIf
                        Sleep(300);(250)
                    WEnd
            ElseIf _IsPressed("1B", $hDLL) Then
                MsgBox($MB_SYSTEMMODAL, "_IsPressed", "The Esc Key was pressed, therefore we will close the application.")
                ExitLoop
            EndIf

            Sleep(10)

        WEnd

        If $fClose Then
            $fClose = False
            AdlibUnRegister("show_timer")
            GUIDelete($gui)
            GUISetState(@SW_ENABLE, $Form1);enable parent GUI
            GUISetState(@SW_SHOW,$Form1)
            Return
        Else
            _draw()
            Sleep(50)
            $sec = @SEC
        EndIf
    WEnd
EndFunc; ==> _DigitalCLock


Func _ExitClock();Press Escape key for >5sec
    Local $Count = 0
    If _IsPressed("1B",$hDLL) Then
        $Return = _KeyPressed("1B", $Count)
        ConsoleWrite("Escape Key Held for - " & $Return & "mS" & @CRLF)
        If $Return > 3000 Then
            $fClose = True
        EndIf
    Endif
EndFunc;==>_ExitClock()

Func _KeyPressed($kp_Key, ByRef $kp_Count)
    $kp_Count += 1
    Local $kp_Timer = TimerInit()
    While _IsPressed("1B")
        Sleep(100)
    WEnd
    Return TimerDiff($kp_Timer)
EndFunc   ;==>_KeyPressed


;################ Functions from StopwatchUDF.au3 #####################
; The function that starts or resets the stopwatch
Func start_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $PausedTimer = 0
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)


EndFunc   ;==>start_timer

; The function that pauses the stopwatch
Func pause_timer()
   HotKeySet("{NUMPADSUB}") ;disable pause timer
   HotKeySet("{NUMPADMULT}", "resume_timer") ;enable resume timer
   $PausedTimer += Int(TimerDiff($Init0))
   AdlibUnRegister()
EndFunc   ;==>pause_timer

; The function that resumes the stopwatch
Func resume_timer()
   HotKeySet("{NUMPADMULT}") ;disable resume timer
   HotKeySet("{NUMPADSUB}", "pause_timer") ;enable pause timer
   $Init0 = TimerInit()
   AdlibRegister("show_timer", 60)
EndFunc   ;==>resume_timer

Func show_timer()     ; _TicksToTime to get hours, mins, seconds
   _TicksToTime(Int(TimerDiff($Init0) + $PausedTimer), $iTimerHours, $iTimerMins, $iTimerSecs)

   ;StringFormat to display the time as HH:MM:SS
   ;ToolTip("HH:MM:SS = " & StringFormat("%02i:%02i:%02i", $iHours, $iMins, $iSecs), 0, 0, "Timer")
EndFunc   ;==>show_timer

; Exit
Func Quit()
   Exit
EndFunc   ;==>Quit
;################ Functions from StopwatchUDF.au3 #####################

Func _draw($forceDraw = False)
    ; calculates angles for min/sec dials, manages execution of drawing routines
    Local $doDraw = False

    Sleep(25)
    ;_drawSec()
    _DrawClock()
    _DrawTimer();Digital Cue Timer 00:00:00
    _DrawAlarmTime($iEvent);Event no. in Sequence with Hints in test string
    GUICtrlSetGraphic($SecSquare, $GUI_GR_REFRESH)
EndFunc   ;==>_draw
;#cs
Func _DrawClock();Digital System Time
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($ClockSquare)
    $ClockSquare = GUICtrlCreateGraphic(5, 5, 180, 30);5, 5, 200, 30
    _timeWrite(0, Int(@HOUR / 10), "regular", $ClockSquare);e.g. 1pm = 13 /10 =1
    _timeWrite(20, Mod(@HOUR, 10), "regular", $ClockSquare);e.g. 1pm = 13Mod10 = 1 with 3 remainder
    _timeWrite(50, Int(@MIN / 10), "regular", $ClockSquare)
    _timeWrite(70, Mod(@MIN, 10), "regular", $ClockSquare)
    _timeWrite(100, Int(@SEC / 10), "regular", $ClockSquare)
    _timeWrite(120, Mod(@SEC, 10), "regular", $ClockSquare)
EndFunc   ;==>_drawTime
;#ce
Func _DrawTimer();Digital Cue Timer 00:00:00
    ;return
    ; manages execution of write commands for HH MM SS characters
    GUICtrlDelete($TimerSquare)
    $TimerSquare = GUICtrlCreateGraphic(205, 5, 220, 30);Timer
    _timeWrite(0, 13, "Timer", $TimerSquare);C
    _timeWrite(20, 11, "Timer", $TimerSquare);L
    _timeWrite(50, 12, "Timer", $TimerSquare);-
    _timeWrite(80, Int($iTimerHours / 10), "Timer", $TimerSquare)
    _timeWrite(100, Mod($iTimerHours, 10), "Timer", $TimerSquare)
    _timeWrite(130, Int($iTimerMins / 10), "Timer", $TimerSquare)
    _timeWrite(150, Mod($iTimerMins, 10), "Timer", $TimerSquare)
    _timeWrite(180, Int($iTimerSecs / 10), "Timer", $TimerSquare)
    _timeWrite(200, Mod($iTimerSecs, 10), "Timer", $TimerSquare)

EndFunc   ;==>_drawTime
;#cs
Func _drawAlarmTime($iEvent);Digital Time
    ;Return
    ; manages execution of write commands for HH MM SS characters for the Alarm time
    GUICtrlDelete($AlarmSquare)
    $AlarmSquare = GUICtrlCreateGraphic(480, 5, 220, 30)
    _timeWrite(0, 10, "Alarm", $AlarmSquare);A
    _timeWrite(20, 11, "Alarm", $AlarmSquare);L
    _timeWrite(50, 12, "Alarm", $AlarmSquare);-
    _timeWrite(80, Int($AlarmHour / 10), "Alarm", $AlarmSquare)
    _timeWrite(100, Mod($AlarmHour, 10), "Alarm", $AlarmSquare)
    _timeWrite(130, Int($AlarmMin / 10), "Alarm", $AlarmSquare)
    _timeWrite(150, Mod($AlarmMin, 10), "Alarm", $AlarmSquare)
    _timeWrite(180, Int($AlarmSec / 10), "Alarm", $AlarmSquare)
    _timeWrite(200, Mod($AlarmSec, 10), "Alarm", $AlarmSquare)
EndFunc   ;==>_drawAlarmTime
;#ce
Func _timeWrite($pos, $num, $type, $graph) ; $type is "Regular" or "Alarm" or "Timer"
    ; manages coloring and writing of 7 segement LEDs for time writing

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 1, 1), $type);0
    _line($graph, $pos + 5, 2, $pos + 3, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 2, 1), $type);1
    _line($graph, $pos + 2, 14, $pos + 0, 22)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 3, 1), $type);2
    _line($graph, $pos + 5 + 2, 0, $pos + 5 + 8, 0)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 4, 1), $type);3
    _line($graph, $pos + 2 + 2, 12, $pos + 2 + 8, 12)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 5, 1), $type);4
    _line($graph, $pos + 2, 24, $pos + 8, 24)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 6, 1), $type);5
    _line($graph, $pos + 5 + 10, 2, $pos + 3 + 10, 10)

    _setColorAndPenForWrite(StringMid($aDigChar[$num], 7, 1), $type);6
    _line($graph, $pos + 2 + 10, 14, $pos + 10, 22)
EndFunc   ;==>_timeWrite

;#cs
Func _line($graph, $x1, $y1, $x2, $y2);Seven Segment Display
    ;Return
    ; draws line for time writing
    GUICtrlSetGraphic($graph, $GUI_GR_MOVE, $x1 + 2, $y1 + 2)
    GUICtrlSetGraphic($graph, $GUI_GR_LINE, $x2 + 2, $y2 + 2)
EndFunc   ;==>_line
;#ce
Func _setColorAndPenForWrite($char, $type)
    ; sets color and pen for next line in time writing, based on '0' or '1' in the DigChar array
    If $char = "1"  Then;7 Segment display ON=1 or OFF=0
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0xCCCCCC, 0xCCCCCC)
        ElseIf $type = "Timer" Then
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x00ff00, 0x00ff00);ct - Bright Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0xEE0000, 0xEE0000)
        EndIf
    Else
        If $type = "Alarm"  Then
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($AlarmSquare, $GUI_GR_COLOR, 0x222222, 0x222222)
        ElseIf $type = "Timer" Then;ct
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($TimerSquare, $GUI_GR_COLOR, 0x002200, 0x002200);ct - Lite Green RGB
        Else
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_PENSIZE, 2)
            GUICtrlSetGraphic($ClockSquare, $GUI_GR_COLOR, 0x330000, 0x330000)
        EndIf
    EndIf
EndFunc   ;==>_setColorAndPenForWrite

Func _drawSec()
    Return
    ; draws circle seconds indicator
    $aXY = _getXY(@SEC, 240)
    GUICtrlDelete($SecSquare)
    $SecSquare = GUICtrlCreateGraphic(350 + $aXY[0] - 8, 350 + $aXY[1] - 8, 16, 16)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_COLOR, 0x0000FF, 0x0000FF)
    GUICtrlSetGraphic($SecSquare, $GUI_GR_ELLIPSE, 0, 0, 16, 16)
EndFunc   ;==>_drawSec

Func _getXY($sec, $hypo)
    ; returns array with X,Y coordinates for the seconds points for $sec seconds, with $hypo(tenuse) distance from center
    Dim $result[2]
    Local $pi = 3.14159265358979
    Local $degToRad = $pi / 180
    Local $degrees = $sec * 6 - 90
    Local $x = Cos($degrees * $degToRad) * $hypo
    Local $y = Sin($degrees * $degToRad) * $hypo
    $result[0] = $x
    $result[1] = $y
    Return $result
EndFunc   ;==>_getXY


Func _initDigChar(ByRef $aDigChar)
    ; define leds for digital numbers: 1 or 0 for leds on/off in 7-led digital clock characters
    $aDigChar[0] = "1110111"
    $aDigChar[1] = "0000011"
    $aDigChar[2] = "0111110"
    $aDigChar[3] = "0011111"
    $aDigChar[4] = "1001011"
    $aDigChar[5] = "1011101"
    $aDigChar[6] = "1111101"
    $aDigChar[7] = "0010011"
    $aDigChar[8] = "1111111"
    $aDigChar[9] = "1011111"
    $aDigChar[10] = "1111011" ; A
    $aDigChar[11] = "1100100" ; L
    $aDigChar[12] = "0001000" ; -
    $aDigChar[13] = "1110100" ;C
EndFunc   ;==>_initDigChar

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

  • Moderators

VenusProject2,

Glad I could help. Live long and prosper.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...