Jump to content

Recommended Posts

Hey guys,

         for some reason when I run this command with run as in autoit it returns access is denied. but when I run the same thing in an elevated command shell it works fine. Im not sure where I am messing up.

global $rtech,$rcred, $IP
    $rtech = inputbox("","username")
    $rcred = InputBox("","password")
    $ip = inputbox("","enter IP")
    $pid = Runas ($rtech,"mhs", $rcred, 2 ,@ComSpec & ' /c reg query \\' & $ip & '"\hklm\software\microsoft\windows\currentversion\group policy\state\machine"|findstr /i "disting"', @SystemDir, @SW_hide, $STDERR_CHILD + $STDOUT_CHILD)
    Local $line
    While 1
        $line &= StdoutRead($pid)
        If @error Then ExitLoop
    WEnd
    While 1
        $line &= StderrRead($pid)
        If @error Then ExitLoop
    WEnd
    MsgBox(0, "", $line)

 

Link to post
Share on other sites
  • Developers

Try the RunAs() with using 0 or 1 in stead of 2 for the third parameter to see whether that is causing it.

Jos 

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites

@JohnOne I had #RequireAdmin at the start of the GUI this was a part of and then I ran into the issue that everything the GUI ran it did with admin when I needed functions to run as the logged in user. So then I added the input boxes for admin and password and now some functions do not work.

@Jos I have used RunAs() with 0,1,2,and 4 and it all fails.

Whats blowing my mind is that almost every function uses this same format. All my "wmic" functions work fine. for example:

$pid = Runas ($rtech,"mhs", $rcred, 2 ,@ComSpec & " /c wmic /node:" & GUICtrlRead($IP) & " computersystem get name", @SystemDir, @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD)

_The above works great_

Here are the facts:

All my format for commands remain the same throughout

All commands can be put into cmd and run successfully

All commands work when #RequireAdmin is included instead of starting with " Runas ($rtech,"mhs", $rcred...)

Wmic commands all run successfully

getmac /s command runs successfully

net user commands fail with "Access Denied"

reg query commands fail with "Access Denied"

 

Solution will be to find whats different about the wmic/getmac and the reg query/net user commands

 

Edited by Milas
Link to post
Share on other sites

RunAs does not give process that is run the Admin Token.  It only runs the process as the specified user.  #RequireAdmin request the Admin Token.  There are ways to do without using #RequireAdmin, but it will require re-execution of your script, or a secondary script called by the main script.  Here are a few threads that may help.

 

 

Here are some additional threads.  

https://www.google.com/search?q=site:www.autoitscript.com+runas+admin

You can do this without storing credentials in the script.  I just depends on how you want to organize your script to get it done.

 

Adam

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By zoel
      Hello people, I have a script which calls CMD and executes the netstat command, but when I run it through SCITE the GUI opens but I have no output, How can I run the command as administrator?
      Here is my script so far
      #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <ScrollBarsConstants.au3> #include <WindowsConstants.au3> #RequireAdmin Local $aWndPos Local $hWnd = GUICreate("Form2", 900, 420, -1, -1, Default + $WS_MAXIMIZE) GUISetBkColor(0xE4E4E4) Local $idFilemenu = GUICtrlCreateMenu("&File") Local $idExititem = GUICtrlCreateMenuItem("Exit", $idFilemenu) Local $idInput = GUICtrlCreateEdit("", 210, 10, 660, 360) GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) GUICtrlSetFont(-1, 10, 400, Default, "COURIER NEW") Local $idButton = GUICtrlCreateButton("NetStat", 10, 10, 190, 25) GUICtrlSetResizing(-1, BitOR($GUI_DOCKLEFT, $GUI_DOCKTOP, $GUI_DOCKWIDTH, $GUI_DOCKHEIGHT)) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idExititem Exit Case $idButton GUICtrlSetData($idInput, _CmdInfo() & @CRLF) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) EndSwitch WEnd Func _CmdInfo($_sCmdInfo = "netstat /b") Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo, "", @SW_HIDE, BitOR($STDERR_CHILD, $STDOUT_CHILD)) ; Wait until the process has closed using the PID returned by Run. ProcessWaitClose($iPID) ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead. Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF) Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF) Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr Return $sReult EndFunc  
    • By cruisepandey
      Hi There ! 
      I have a script here : 
       
      ;Launch CMD
      Run("C:\Windows\System32\cmd.exe")
      sleep(2000)
      $cmdHandle = WinActivate("C:\Windows\System32\cmd.exe")
      Sleep(2000)
      ;Sending document
      ControlSend($cmdHandle, "", "", "ftp" & @CRLF)
      ControlSend($cmdHandle, "", "", "open" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "first command" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "second-coomand" & @CRLF)
       
      first-command and second-command I can't provide cause it's internal. I have complied this .au3 file into an exe and it does the work. But I need to invoke this with Java. Java code I have tried is : 
       
          ProcessBuilder pb = new ProcessBuilder("C:\\Users\\username\\eclipse-workspace\\Examples\\src\\com\\own\\examples\\etc.exe");
          pb.start();
          Thread.sleep(5000);
       
      Through java it just launches the cmd and nothing happens after that. Please help !!
    • By Chimp
      I'm trying to drive a command prompt by sending instructions via a NamedPipe.
      This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
      This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
      This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
      Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
      suggestions on how to make it work are welcome
      thanks
      #include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite  
    • By HariKara
      I have a script that seems to launch perfectly fine with IECreate, however, I want to launch the Browser and a specific URL with the RunAs command. I fairly new to AutoIT and wanted to know if someone can point me in the right direction.
      Local $surl = "http://somewebsite.com/DODA/admin/job.aspx"
      Local $oIE = _IECreate($sURL)
      The above launches the website correctly with the correct URL, however, I have tried the below and this fails to load and browser?
      #include <AutoItConstants.au3>
      ;========================
      $oSleep = "200"
      Local $surl = "http://somewebsite.com/DODA/admin/job.aspx"
      Local $oIE = RunAs($args("username"), $args("domain"), $args("logonpassword"), "", "C:\Program Files (x86)\Internet Explorer\iexplore.exe http://somewebsite.com/DODA/admin/job.aspx")
      _IELoadWait($oIE)
       
      I get the following error back?
      --> IE.au3 T3.0-2 Error from function _IELoadWait, $_IESTATUS_InvalidDataType
      --> IE.au3 T3.0-2 Error from function _IEGetObjById, $_IESTATUS_InvalidDataType
      --> IE.au3 T3.0-2 Error from function _IEGetObjById, $_IESTATUS_InvalidDataType
    • By Burgs
      Greetings,
        I would like to be able to write a script to send commands to the console for creation of Gstreamer pipelines.  I was thinking of something similar to this:
      Local $iPID = Run("C:\Windows\System32\cmd", "", @SW_MAXIMIZE) ;THIS OPENS THE CONSOLE...!!! if $iPID == 0 Then ConsoleWrite(@CRLF & "I DID NOT OPEN CMD...error: " & @error & @CRLF) if $iPID <> 0 Then ConsoleWrite(@CRLF & "I OPENED CMD...!!!" & @CRLF) $hCmd = WinGetHandle("C:\WINDOWS\system32\cmd.exe") if $hCmd <> 0 Then WinActivate($hCmd) ;ensure command console is active... $sOutput = Send("cd C:\gstreamer\1.0\x86_64\bin" & @CRLF, $SEND_RAW) $sOutput = Send("gst-launch-1.0 videotestsrc ! autovideosink" & @CRLF, $SEND_RAW) Sleep(3000) ControlSend($hCmd, "", "", "exit" & @CR) EndIf ;$hCmd NOT "0"... I don't really know if this is the best way to open the console and send commands into it.  I'm also not sure about how to best catch any errors that may occur...likely this needs to be accomplished with the STDOUTREAD command however I've not had experience using it before and therefore would appreciate some advice that anybody may offer. 
      Basically I'm seeking guidance on how to best automate the opening of the console, sending lines of commands to be executed, and handling any potential errors in the execution of those commands...I thank you in advance.  Regards.
×
×
  • Create New...