Jump to content

Error with SMTP Mailer


Recommended Posts

I'm currently using the code from this thread

https://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/?page=1

This is the code I have so far

;
;##################################
; Include
;##################################
#Include<file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "mail.WEBSITE.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "Dgameman1"                      ; name from who the email was sent
$FromAddress = "Dgameman1@WEBSITE.com" ; address from where the mail should come
$ToAddress = "Dgame1@gmail.com"   ; destination address of the email - REQUIRED
$Subject = "Userinfo"                   ; subject from the email - can be anything you want it to be
$Body = ""                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = ""                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "Dgameman1@WEBSITE.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "PASSWORD!"                  ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25                            ; port used for sending the mail
$ssl = 0                                ; enables/disables secure socket layer sending - put to 1 if using httpS
;$IPPort=465                          ; GMAIL port used for sending the mail
;$ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail=""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc

I changed some information in the Variables.

The hosting provider I am using is Dreamhost and this is their Email Client Configuration page

http://wiki.dreamhost.com/Email_Client_Configuration

The error I get is

Quote

### COM Error !  Number: 80020009   ScriptLine: 92   Description:The transport failed to connect to the server.

Any ideas?

Edited by Dgameman1
Link to comment
Share on other sites

  • Developers
28 minutes ago, Dgameman1 said:

Wait, what is this #Include<file.au3> ?

An required include file... ;)

Do you still have the same error with the changed Port/SSL settings?

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to comment
Share on other sites

8 minutes ago, Jos said:

An required include file... ;)

Do you still have the same error with the changed Port/SSL settings?

Jos

Oh, Everything works now :)

And I know it's a required include file, but where is it? Is it a default AutoIt include? And why is it just named File? lol

Link to comment
Share on other sites

  • Developers
3 minutes ago, Dgameman1 said:

but where is it?

At the standard include filelocation C:\Program Files (x86)\AutoIt3\Include.

3 minutes ago, Dgameman1 said:

Is it a default AutoIt include?

Yes a standard include, but you could have easily checked both questions yourself by pressing F1 as that would open the helpfile and show it is in there.

 

3 minutes ago, Dgameman1 said:

And why is it just named File?

No idea what you are asking here.

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to comment
Share on other sites

@Dgameman1

That file is in @AutoItDir\Includes(And almost all include files are there for you). If you name it in your script, the program will get the appropriate function inside that file. 

Edit - No, its not a default. If you need a function from those include files, then you need to name it in your script and use the function.

Edited by kcvinu
Spoiler

My Contributions

Glance GUI Library - A gui library based on Windows api functions. Written in Nim programming language.

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Link to comment
Share on other sites

2 hours ago, Dgameman1 said:

 And why is it just named File? lol

It is called File.au3 because it is for working with 'files', in the case of the above script, it is needed for the  _PathFull function.

If @error Then
    MsgBox(262192, "", @ComputerName & " slaps " & @UserName & " around a bit with a large trout!")
EndIf

"Yeah yeah yeah patience, how long will that take?"  -Ed Gruberman

REAL search results  |  SciTE4AutoIt3 Editor Full Version

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...