Jump to content
Sign in to follow this  
Chocolade

error: Unable to load DLL 'AutoItX3_x64.dll

Recommended Posts

I'm using csharp with the autoitx3.

I added to my project referenced the autoit dll's. Everything was working find until I got exception say:

"Unable to load DLL 'AutoItX3_x64.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"

And I downloaded and installed the autoit and added the dll files referenced them to my project also the file name:

AutoitX3_x64.dll but for some reason I don't see this dll file in the project tried to add it as reference few times and in the References I see only two files of Autoit: AutoItX3.Assembly.dll and Interop.AutoItX3Lib.dll but for some reason it's not adding the AutoitX3_x64.dll as reference.

 

How should I add then the AutoitX3_x64.dll to my project ? I keep getting the exception message that it's missing.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ScrapeYourself
      I didn't like the search time of Simple Native Image Search, and being on windows 10 64bit, I couldn't get ImageSearchDll.dll to work properly.
      So I started researching image search routines and found this excellent post and set of replies find-a-bitmap-within-another-bitmap.

      I really liked the pattern that the Simple Native Image Search used, the clipboard usage and the method of searching. Although I think it could be improved by using some short circuit techniques to return sooner, like consecutive matched > 65% return | matched total > 85% return) , and I wanted the function to manage the click on the found image as well.
      So I just did a bit more research and a few trips to MSDN and stackoverflow, these two snippets allow me to replicate KyleJustKnows code, and click.  Another feature is that it also saves the image it captures to disk, so that if the image is not found you can check what was captured, and alternatively cut out a new search image to use.
      private void PrintScreen() { keybd_event(VK_SNAPSHOT, 0, KEYEVENTF_EXTENDEDKEY, 0); keybd_event(VK_SNAPSHOT, 0, KEYEVENTF_KEYUP, 0); } public Bitmap CaptureScreenPrtSc() { PrintScreen(); if (Clipboard.ContainsImage()) { using (Image img = Clipboard.GetImage()) { img.Save("ClipBoard.PNG", ImageFormat.Png); return new Bitmap(img); } } return default; } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool GetCursorPos(out MousePoint lpMousePoint); [DllImport("user32.dll")] private static extern void mouse_event(int dwFlags, int dx, int dy, int dwData, int dwExtraInfo); private MousePoint GetCursorPosition() { var gotPoint = GetCursorPos(out MousePoint currentMousePoint); if (!gotPoint) { currentMousePoint = new MousePoint(0, 0); } return currentMousePoint; } private void MouseEvent(MouseEvents value) { MousePoint position = GetCursorPosition(); mouse_event ((int)value, position.X, position.Y, 0, 0) ; }
      So after managing to compile the dll with COM support, with much reading of this forum and many posts from paulpmeier, ptrex, LarsJ, and others about loading .net, I managed to get this all working.

      Here is the BotIt Core:
      ; BotIt Core Global $sPath = "BotIt.dll" Global $RegAsmPath = "C:\Windows\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe" Func BotIt_StartUp() RegisterBotIt() OnAutoItExitRegister("UnregisterBotIt") EndFunc ;==>BotIt_StartUp Func RegisterBotIt() RunWait($RegAsmPath & " /register /codebase /tlb " & $sPath, @ScriptDir, @SW_HIDE) EndFunc ;==>RegisterBotIt Func UnregisterBotIt() FileDelete("Step.txt") RunWait($RegAsmPath & " /unregister " & $sPath, @ScriptDir, @SW_HIDE) EndFunc ;==>UnregisterBotIt Func ActivateAndSearch($sTitle, $sImgPath, $bClick = True) WinActivate($sTitle) Sleep(1000) $oBotIt = ObjCreate("BotIt.DetectImageAndClick") ConsoleWrite($sImgPath & @CRLF & $bClick & @CRLF) $bRet = $oBotIt.FindAndClick($sImgPath, $bClick) Return $bRet EndFunc ;==>ActivateAndSearch  
      Usage:
      Do Sleep(500) Until ActivateAndSearch("Window Title", "PathToFile")

      I hope you enjoy!
      Regards,
      ScrapeYourself
       
       
      BotIt.cs
    • By BetaLeaf
      What is Rollbar?
      Rollbar provides real-time error alerting & debugging tools for developers. Learn more about it at https://rollbar.com/product/
      Demo: https://rollbar.com/demo/demo/
      Screenshot:
      Instructions: (RollbarTest.au3)
      ; Include RollbarSDK #include "RollbarSDK.au3" ;Turns on ConsoleWrite debugging override. ;Global $Rollbar_Debug=False ; Initialize RollbarSDK with the project's API key. ; Parameters ....: $__Rollbar_sToken - [Required] Go to https://rollbar.com/<User>/<ProjectName>/settings/access_tokens/ for your project. Use the token for post_server_item. _Rollbar_Init("eaa8464a4082eeabd9454465b8f0c0af") ; Write code that causes an error you want to catch, then call ; _Rollbar_Send ; Parameters ....: $__Rollbar_sErrorLevel - [Required] Must be one of the following values: Debug, Info, Warning, Error, Critical. ; $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_Send("Debug", "This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_Send("Warning", "This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_Send("Error", "This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_Send("Critical", "This is an critical message. If you received this, you were successful!", "Critical Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!") ;No Message ; Rollbar_Send's helper functions ; Parameters ....: $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_SendDebug("This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_SendInfo("This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_SendWarning("This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_SendError("This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_SendCritical("This is an critical message. If you received this, you were successful!", "Critical Message") ; Usable Example Local $sImportantFile = "C:\NOTAREALFILE_1234554321.txt" Switch FileExists($sImportantFile) Case True MsgBox(0, "Example Script", "An important file was found. Continuing...") Case Else _Rollbar_SendCritical('An important file was missing. Halting... File: "' & $sImportantFile & '"', 'Important file "' & $sImportantFile & '" is missing.') EndSwitch Notes: Please comment your feedback, advice, & suggestions below. While this is only a proof of concept, I will expand its feature set for everyone to use. 
      Right now, it is fully functional but not tested in production.
       
       
      Changelog:
      RollbarSDK.au3
      RollbarTest.au3
      v0.2
       
      v0.1.1
       
    • By Dwalfware
      Hi Folks
      Can not get my head around this one.
      This function gets the DNS object s
      If you have two DNS entries fine. but if you have only one! Trouble
      $objItem.DNSServerSearchOrder[0] = Primary DNS
      $objItem.DNSServerSearchOrder[1] = Secondry DNS not always there. I need a way to return 0 if not there or the IP if its there.
      Or is there a way to tell how many objects there are in the "[?]"
      I'm terrible at WMI errors, thanks for help in advance.
      Func _GETcurrentNICinfo2() $oErrors = ObjEvent("AutoIt.Error", "Error_Handle") Local $DnsSecondry Local $objWMIService = ObjGet( "winmgmts:\\" & @ComputerName & "\root\CIMV2" ) Local $query = $objWMIService.ExecQuery("SELECT DNSServerSearchOrder FROM Win32_NetworkAdapterConfiguration WHERE Index = " & _GetSelectedNIC(), "WQL", 0x30 ) If @error Then Return 0 If NOT IsObj($query) Then Return 0 Else For $objItem In $query Return $objItem.DNSServerSearchOrder[1] next Endif EndFunc  
    • By DiegoCorradini
      Hi all,
      I have a problem to handle the controls of an application.
      Using AutoIT Windows Tool I can get only the Window (see Summary of the picture).
      Any tips to get the controls without knowing the name?
      (PS Using TestStack.White everything works, however I want the HIDE application feature of AutoIT). 
       
      Many thanks

    • By vati1011
      Hey, guys.
      Currently, I'm using Opencv UDF and i'm  encountering issues with DLLOPEN(). it is failing and returning -1
      But, I cannot figure out why it is failing.
      I need help from people.
      I'm running windows 10 32bit.
      This's my code.
      #RequireAdmin $fileopen = DllOpen("opencv_core2413.dll") MsgBox(0,"Result",$fileopen) Example.au3opencv_core2413.dll
×
×
  • Create New...