Jump to content

GUIListViewEx - New Version 13 Sep 21


Recommended Posts

  • Moderators

232showtime,

Certainly - here is the example reduced to just the save/load code (you will need the Beta UDF in the post above yours):

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

#include "GUIListViewEx.au3"

$hGUI = GUICreate("Save/Load Example", 1000, 510)

; Create ListView
$cLV_1 = GUICtrlCreateListView("Zero Column|One Column|Two Column|Three Column", 10, 30, 480, 260, BitOR($LVS_SINGLESEL, $LVS_SHOWSELALWAYS))
_GUICtrlListView_SetExtendedListViewStyle($cLV_1, $LVS_EX_FULLROWSELECT)
For $i = 0 To 3
    _GUICtrlListView_SetColumnWidth($cLV_1, $i, 100)
Next

; Create array and fill listview
Global $aLVArray_1[6][4]
For $i = 0 To 5
    $sData = "Item " & $i & "-0"
    $aLVArray_1[$i][0] = $sData
    For $j = 1 To 3
        $sData &= "|SubItem " & $i & "-" & $j
        $aLVArray_1[$i][$j] = "SubItem " & $i & "-" & $j
    Next
    GUICtrlCreateListViewItem($sData, $cLV_1)
Next

; Initiate ListView
$iLVIndex_1 = _GUIListViewEx_Init($cLV_1, $aLVArray_1)

; Set all column editable
_GUIListViewEx_SetEditStatus($iLVIndex_1, "*")

; Create empty UDF ListView
$cLV_2 = _GUICtrlListView_Create($hGUI, "", 510, 30, 480, 260, BitOr($LVS_REPORT, $LVS_SINGLESEL, $LVS_SHOWSELALWAYS, $WS_BORDER))
_GUICtrlListView_SetExtendedListViewStyle($cLV_2, $LVS_EX_FULLROWSELECT)
; Initiate to get index - empty array passed
$iLVIndex_2 = _GUIListViewEx_Init($cLV_2, "")
; Create additional buttons
$cSave = GUICtrlCreateButton("Save LH ListView", 340, 470, 150, 30)
$cLoad = GUICtrlCreateButton("Load RH ListView", 510, 470, 150, 30)
GUICtrlSetState($cLoad, $GUI_DISABLE)
$cExit = GUICtrlCreateButton("Exit", 880, 470, 110, 30)

_GUIListViewEx_MsgRegister()

GUISetState()

While 1

    $iMsg = GUIGetMsg()
    Switch $iMsg
        Case $GUI_EVENT_CLOSE, $cExit
            Exit

        Case $cSave
            _GUIListViewEx_SaveListView($iLVIndex_1, "Save.lvs")
            GUICtrlSetState($cLoad, $GUI_ENABLE)
        Case $cLoad
            _GUIListViewEx_LoadListView($iLVIndex_2, "Save.lvs") ; But return now forced to 2D
    EndSwitch

    ; Allow edit on double click
    $aRet = _GUIListViewEx_EditOnClick()

WEnd

All the items are editable so you can check that any changed file is saved and loaded correctly.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Replies 609
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

[NEW VERSION] - 13 Sep 21 Changed:  - A small change to the $iAdded parameter value of 512 - this used to block ALL drag/drop operations, but now only blocks INTERNAL drag/drop. So to block

I've tested the header color example as 64 bit code on both Windows 7 and Windows 10. In both cases, it fails. There are no colors in the header. Then I've made a much smaller example that only c

Hi jimmy123j, I had the same issue with the dotted rectangle when the item is focused. @LarsJ provided a solution that worked fine for me and it seems to solve your problem too. 1) Running your

Posted Images

@Melba23,

hi I dont know what im missing in _GUIListViewEx_SaveListView and _GUIListViewEx_LoadListView

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include "GUIListViewEx.au3"
#include <Array.au3>

Global $List1, $sString, $hButton0

gui1()

Func gui1()
    $hGUI1 = GUICreate("Gui 1", 400, 400, 200, 200)
    $hButton0 = GUICtrlCreateButton("Load", 100, 10, 80, 30)
    $hButton1 = GUICtrlCreateButton("Clear 1", 10, 10, 80, 30)
    $hButton2 = GUICtrlCreateButton("Edit", 10, 60, 80, 30)
    $List1 = GUICtrlCreateListView("", 10, 100, 180, 80, BitOR(0x0200, 0x008), BitOR(0x00000020, 0x00000001))

    _GUICtrlListView_AddColumn($List1, "1", 150, 2)
    _GUICtrlListView_AddColumn($List1, "2", 500, 2)
    _GUICtrlListView_AddColumn($List1, "3", 50, 2)
    _GUICtrlListView_Scroll($List1, 10, 100)

    GUISetState()

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $hButton1
                MsgBox("", "MsgBox 1", "Clear???")
                _GUICtrlListView_DeleteAllItems($List1)
            Case $hButton2
                ; Disable the first GUI
                GUISetState(@SW_DISABLE, $hGUI1)
                gui2()
                ; Re-enable the first GUI
                GUISetState(@SW_ENABLE, $hGUI1)

            Case $hButton0
                _GUIListViewEx_LoadListView($List1, "Save.lvs")

        EndSwitch
    WEnd
EndFunc   ;==>gui1

Func gui2()
    $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
    $sString = GUICtrlCreateEdit("", 50, 50, 100, 100, $ES_WANTRETURN)
    $hButton3 = GUICtrlCreateButton("Save", 10, 10, 80, 30)


    GUISetState()

    While 1


        ; We can only get messages from the second GUI
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                GUIDelete($hGUI2)
                ExitLoop
            Case $hButton3
                $sRead1 = GUICtrlRead($sString)
                _GUICtrlListView_AddItem($List1, $sRead1) ; Row 1 Col 1
                _GUIListViewEx_SaveListView($List1, "Save.lvs")
                GUICtrlSetState($hButton0, $GUI_ENABLE)
                GUISetState(@SW_HIDE, $hGUI2)
                ExitLoop

;~              _GUIListViewEx_SaveListView($List1, "Save.lvs")
;~          Case $cLoad
;~              _GUIListViewEx_LoadListView($iLVIndex_2, "Save.lvs") ; But return now forced to 2D


        EndSwitch
    WEnd
EndFunc   ;==>gui2

Please I need  help what am I missing???

ill get to that... i still need to learn and understand a lot of codes graduated.gif

Correct answer, learn to walk before you take on that marathon.

Link to post
Share on other sites
  • Moderators

232showtime,

Try this:

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include "GUIListViewEx.au3"
#include <Array.au3>

Global $List1, $sString, $hButton0, $iLV_Index

gui1()

Func gui1()
    $hGUI1 = GUICreate("Gui 1", 400, 400, 200, 200)
    $hButton0 = GUICtrlCreateButton("Load", 100, 10, 80, 30)
    $hButton1 = GUICtrlCreateButton("Clear 1", 10, 10, 80, 30)
    $hButton2 = GUICtrlCreateButton("Edit", 10, 60, 80, 30)
    $List1 = GUICtrlCreateListView("", 10, 100, 180, 80, BitOR(0x0200, 0x008), BitOR(0x00000020, 0x00000001))

    _GUICtrlListView_AddColumn($List1, "1", 150, 2)
    _GUICtrlListView_AddColumn($List1, "2", 500, 2)
    _GUICtrlListView_AddColumn($List1, "3", 50, 2)
    _GUICtrlListView_Scroll($List1, 10, 100)

    ; Initiate ListView within UDF
    $iLV_Index = _GUIListViewEx_Init($List1, "")

    GUISetState()

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $hButton1
                MsgBox("", "MsgBox 1", "Clear???")
                _GUICtrlListView_DeleteAllItems($List1)
            Case $hButton2
                ; Disable the first GUI
                GUISetState(@SW_DISABLE, $hGUI1)
                gui2()
                ; Re-enable the first GUI
                GUISetState(@SW_ENABLE, $hGUI1)

            Case $hButton0
                _GUIListViewEx_LoadListView($iLV_Index, "Save.lvs")
                ; Reset column alignment
                _GUICtrlListView_JustifyColumn($List1, 0, 2)
                _GUICtrlListView_JustifyColumn($List1, 1, 2)
                _GUICtrlListView_JustifyColumn($List1, 2, 2)
                _WinAPI_RedrawWindow(GUICtrlGetHandle($List1))

        EndSwitch
    WEnd
EndFunc   ;==>gui1

Func gui2()
    $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
    $sString = GUICtrlCreateEdit("", 50, 50, 100, 100, $ES_WANTRETURN)
    $hButton3 = GUICtrlCreateButton("Save", 10, 10, 80, 30)


    GUISetState()

    While 1


        ; We can only get messages from the second GUI
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $hButton3
                $sRead1 = GUICtrlRead($sString)

                _GUIListViewEx_Insert($sRead1 & "||") ; Add item to ListView uaing UDF

                _GUIListViewEx_SaveListView($iLV_Index, "Save.lvs")
                GUICtrlSetState($hButton0, $GUI_ENABLE)
                ExitLoop

        EndSwitch
    WEnd

    GUIDelete($hGUI2)

EndFunc   ;==>gui2

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

Hi Melba, a small (hopefully)  feature request - an updown control for the edit control, using the unused

$vParam1 perhaps, as with the auto-drop down combo?

I am always looking for ways to expedite data entry and/or minimise keyboard use for my users...

Edited by dmob
Additional info
Link to post
Share on other sites
  • Moderators

dmob,

Please let me know what you think of this implementation. Example (look at line #30):

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>

#include "GUIListViewEx_UpDown.au3"

#include <Array.au3> ; Just for display in example

Global $aRet, $iEditMode = 0

; Create GUI
$hGUI = GUICreate("LVEx Beta Example", 500, 360)

; Create ListView
$cListView = GUICtrlCreateListView("Tom|Dick|Harry", 10, 10, 480, 300, $LVS_SHOWSELALWAYS)
_GUICtrlListView_SetExtendedListViewStyle($cListView,$LVS_EX_FULLROWSELECT )
_GUICtrlListView_SetColumnWidth($cListView, 0, 150)
_GUICtrlListView_SetColumnWidth($cListView, 1, 150)
_GUICtrlListView_SetColumnWidth($cListView, 2, 150)

; Create array and fill Left listview
Global $aLV_List[15]
For $i = 0 To 14
    $aLV_List[$i] = $i & "|Dick " & $i & "|Harry " & $i
    GUICtrlCreateListViewItem($i & "|Dick " & $i & "|Harry " & $i, $cListView)
Next

; Initiate LVEx - use filling array - no count parameter - default insert mark colour (black) - drag image - sortable + not select all text
$iLV_Index = _GUIListViewEx_Init($cListView, $aLV_List, 0, Default, Default, 4)

_GUIListViewEx_SetEditStatus($iLV_Index, "0", 1, 1, "0|9|1") ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
_GUIListViewEx_SetEditStatus($iLV_Index, "1", 2, "1|2|3", 1)
_GUIListViewEx_SetEditStatus($iLV_Index, "2", 2, "1|2|3", 3)

$cDisplay_Button = GUICtrlCreateButton("Show content", 10, 320, 230, 30)
$cExit_Button = GUICtrlCreateButton("Exit", 260, 320, 230, 30)

; Register for sorting, dragging and editing
_GUIListViewEx_MsgRegister()

GUISetState()

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $cExit_Button
            Exit

        Case $cDisplay_Button

            $aLV_List = _GUIListViewEx_ReturnArray($iLV_Index)
            If Not @error Then
                _ArrayDisplay($aLV_List, "Returned Left")
            Else
                MsgBox(0, "Left", "Empty Array")
            EndIf

    EndSwitch

    ; This function must be in the idle loop to enable editing of any kind
    $vRet = _GUIListViewEx_EditOnClick(33)
    If IsArray($vRet) Then
        ; Uncomment to see returned array
        ;ConsoleWrite("Edits performed: " & $vRet[0][0] & @CRLF)
        ;_ArrayDisplay($vRet, @error)
        $avRet = ""
    EndIf

WEnd

And the UDF to use with it:

Read the _GUIListViewEx_SetEditStatus function header to see how the syntax works - I hope it is reasonably intuitive.

M23

Edited by Melba23
Beta code removed

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Moderators

dmob,

Delighted to hear that you like it - I aim to please.....!!!!!!

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

@Melba

I was tinkering around with an auto-drop date picker, and "discovered" this works great:

Local $btnDate = GUICtrlCreateDate("...", 153, 60, 17, 21, BitOR($DTS_SHORTDATEFORMAT, $DTS_RIGHTALIGN))
_SendMessage(GUICtrlGetHandle($btnDate), 0x0201, 1, 1) ; WM_LBUTTONDOWN

However, I tried hacking your UDF and failed miserably...

I added $iMode = 4 to _GUIListViewEx_SetEditStatus, identical to $iMode = 3  and added this to __GUIListViewEx_EditProcess:

;~          Case 3 ; DTP
;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
            Case 3, 4 ; DTP
;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                $fDTP = True
                Local $sDTP_Default = $aEditable[1][$aLocation[1]]
                If $sDTP_Default = Default Then
                    $sDTP_Default = @YEAR & "/" & @MON & "/" & @MDAY
                EndIf
                Local $sDTP_Format = $aEditable[2][$aLocation[1]]
                If $sDTP_Format = Default Then
                    $sDTP_Format = ""
                EndIf
        EndSwitch

        ; Read current text of clicked item
        Local $sItemOrgText = _GUICtrlListView_GetItemText($hGLVEx_Editing, $aLocation[0], $aLocation[1])
        ; Ensure item is visible and get required edit coords

        .
        .
        .
        .
        .
            Case 3 ; DTP
                ; Create temp date picker
                $cGLVEx_EditID = GUICtrlCreateDate($sDTP_Default, $aEdit_Pos[0], $aEdit_Pos[1], $aEdit_Pos[2], $aEdit_Pos[3])
                $hTemp_Edit = GUICtrlGetHandle($cGLVEx_EditID)
                ; Set format if required
                If $sDTP_Format Then
                    GUICtrlSendMsg($cGLVEx_EditID, 0x1032, 0, $sDTP_Format) ; $DTM_SETFORMATW
                EndIf
            Case 4 ; DTP - auto drop
                ; Create temp date picker
                $cGLVEx_EditID = GUICtrlCreateDate($sDTP_Default, $aEdit_Pos[0], $aEdit_Pos[1], $aEdit_Pos[2], $aEdit_Pos[3])
                $hTemp_Edit = GUICtrlGetHandle($cGLVEx_EditID)
                ; Set format if required
                If $sDTP_Format Then
                    GUICtrlSendMsg($cGLVEx_EditID, 0x1032, 0, $sDTP_Format) ; $DTM_SETFORMATW
                EndIf
                
;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                ;_SendMessage($cGLVEx_EditID, 0x0201, 1, 1) ; WM_LBUTTONDOWN
                GUICtrlSendMsg($cGLVEx_EditID, 0x0201, 1, 1) ; WM_LBUTTONDOWN
;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
        EndSwitch

        ; Set font
        GUICtrlSetFont($cGLVEx_EditID, $aLV_FontDetails[0], Default, Default, $aLV_FontDetails[1])

... and broke the UDF :doh:

What am I doing wrong?

Edit: Tried this unsuccessfully too:

Case 3, 4 ; DTP
                $fDTP = True
                Local $sDTP_Default = $aEditable[1][$aLocation[1]]
                If $sDTP_Default = Default Then
                    $sDTP_Default = @YEAR & "/" & @MON & "/" & @MDAY
                EndIf
                Local $sDTP_Format = $aEditable[2][$aLocation[1]]
                If $sDTP_Format = Default Then
                    $sDTP_Format = ""
                EndIf
        EndSwitch
        .
        .
        .
        .
        Case 3, 4 ; DTP
                ; Create temp date picker
                $cGLVEx_EditID = GUICtrlCreateDate($sDTP_Default, $aEdit_Pos[0], $aEdit_Pos[1], $aEdit_Pos[2], $aEdit_Pos[3])
                $hTemp_Edit = GUICtrlGetHandle($cGLVEx_EditID)
                ; Set format if required
                If $sDTP_Format Then
                    GUICtrlSendMsg($cGLVEx_EditID, 0x1032, 0, $sDTP_Format) ; $DTM_SETFORMATW
                EndIf
        EndSwitch
        .
        .
        .
        
        ; Check for auto "drop-down" combo
        If $fAuto_Drop Then
            _SendMessage($hCombo, 0x14F, True) ; $$CB_SHOWDROPDOWN
        EndIf

;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
        If $iEditType = 4 Then
            ;_SendMessage($cGLVEx_EditID, 0x0201, 1, 1) ; WM_LBUTTONDOWN
            GUICtrlSendMsg($cGLVEx_EditID, 0x0201, 1, 1) ; WM_LBUTTONDOWN
        EndIf
;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added this <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Edited by dmob
Link to post
Share on other sites
  • Moderators

dmob,

The final parameter of the WM_LBUTTONDOWN message needs to be coded to determine the offset within the control where the action is to occur - some Googling shows that the formula is as follows:

x = DTP_Width - 10
y = DTP_Height / 2
Param = x + ( y * 0x00010000 )

It works in the original snippet as the "open" button is to the left of the visible control and so the 1 pixel is over the button - within a ListView that is unlikely to be the case and so we have to define the X-coordinate required, which is not hard as we set the width of the control when we draw it (experimentation shows that we can apparently ignore the Y-coordinate):

_SendMessage($hTemp_Edit, 0x0201, 1, $aEdit_Pos[2] - 10) ; WM_LBUTTONDOWN

Try changing the _GUIListViewEx_SetEditStatus lines in the example I posted above to this:

_GUIListViewEx_SetEditStatus($iLV_Index, "0", 3)                    ; No dropdown
_GUIListViewEx_SetEditStatus($iLV_Index, "1", 3, "#")               ; Dropdown with default date
_GUIListViewEx_SetEditStatus($iLV_Index, "2", 3, "2000/01/01#")     ; Dropdown with defined date

and run it with this version of the UDF:

The syntax is pretty easy - a trailing "#" in $vParam1 forces the DTP to open on edit. Does that meet your requirements?

M23

Edited by Melba23
Beta code removed

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Moderators

dmob,

Fine - any other requests?

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

:D I'll let you know...

I must say your UDF makes my app professional and intuitive although I've yet to use all the features. I have

had to tweak a bit for my exact requirements coz I do use a LOT of listviews, and will have to revisit some of my 

code to exploit the UDF fully.

 

 

Link to post
Share on other sites

@Melba23,

Good day,
Im having trouble with my script, it works perfectly on my Office Desktop, but

then I Installed full autoit installation software and a Customized Scite Editor in my laptop.

I ran the same script on my office desktop and laptop..

I got this error after running my script on laptop..

Please note I already download the the latest UDF - GUIListViewEx.au3

>"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" "C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "D:\Script\SavebyMelba2.au3" /UserParams    
+>11:05:25 Starting AutoIt3Wrapper v.16.612.1119.0 SciTE v.3.6.6.0   Keyboard:00000410  OS:WIN_7/Service Pack 1  CPU:X64 OS:X64  Environment(Language:0409)  CodePage:0  utf8.auto.check:4
+>         SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE   UserDir => C:\Users\user\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper   SCITE_USERHOME => C:\Users\user\AppData\Local\AutoIt v3\SciTE 
>Running AU3Check (3.3.12.0)  from:C:\Program Files (x86)\AutoIt3  input:D:\Script\SavebyMelba2.au3
+>11:05:25 AU3Check ended.rc:0
>Running:(3.3.12.0):C:\Program Files (x86)\AutoIt3\autoit3.exe "D:\Script\SavebyMelba2.au3"    
--> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop
"C:\Program Files (x86)\AutoIt3\Include\GUIListViewEx.au3" (5285) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.:
$aRetArray[$i - 1][$j - 1] = $aItems[$j]
^ ERROR
->11:05:38 AutoIt3.exe ended.rc:1
+>11:05:38 AutoIt3Wrapper Finished.
>Exit code: 1    Time: 13.99

this is the same script I ran on laptop and office desktop see below:

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include "GUIListViewEx.au3"
#include <Array.au3>

Global $List1, $sString, $hButton0, $iLV_Index

gui1()

Func gui1()
    $hGUI1 = GUICreate("Gui 1", 400, 400, 200, 200)
    $hButton0 = GUICtrlCreateButton("Load", 100, 10, 80, 30)
    $hButton1 = GUICtrlCreateButton("Clear 1", 10, 10, 80, 30)
    $hButton2 = GUICtrlCreateButton("Edit", 10, 60, 80, 30)
    $List1 = GUICtrlCreateListView("", 10, 100, 180, 80, BitOR(0x0200, 0x008), BitOR(0x00000020, 0x00000001))

    _GUICtrlListView_AddColumn($List1, "1", 150, 2)
    _GUICtrlListView_AddColumn($List1, "2", 500, 2)
    _GUICtrlListView_AddColumn($List1, "3", 50, 2)
    _GUICtrlListView_Scroll($List1, 10, 100)

    ; Initiate ListView within UDF
    $iLV_Index = _GUIListViewEx_Init($List1, "")

    GUISetState()

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $hButton1
                MsgBox("", "MsgBox 1", "Clear???")
                _GUICtrlListView_DeleteAllItems($List1)
            Case $hButton2
                ; Disable the first GUI
                GUISetState(@SW_DISABLE, $hGUI1)
                gui2()
                ; Re-enable the first GUI
                GUISetState(@SW_ENABLE, $hGUI1)

            Case $hButton0
                _GUIListViewEx_LoadListView($iLV_Index, "Save.lvs")
                ; Reset column alignment
                _GUICtrlListView_JustifyColumn($List1, 0, 2)
                _GUICtrlListView_JustifyColumn($List1, 1, 2)
                _GUICtrlListView_JustifyColumn($List1, 2, 2)
                _WinAPI_RedrawWindow(GUICtrlGetHandle($List1))

        EndSwitch
    WEnd
EndFunc   ;==>gui1

Func gui2()
    $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
    $sString = GUICtrlCreateEdit("", 50, 50, 100, 100, $ES_WANTRETURN)
    $hButton3 = GUICtrlCreateButton("Save", 10, 10, 80, 30)


    GUISetState()

    While 1


        ; We can only get messages from the second GUI
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $hButton3
                $sRead1 = GUICtrlRead($sString)

                _GUIListViewEx_Insert($sRead1 & "||") ; Add item to ListView uaing UDF

                _GUIListViewEx_SaveListView($iLV_Index, "Save.lvs")
                GUICtrlSetState($hButton0, $GUI_ENABLE)
                ExitLoop

        EndSwitch
    WEnd

    GUIDelete($hGUI2)

EndFunc   ;==>gui2

Desktop OS:

Win7 Pro 64 bit Service Pack 1

Laptop OS:

Win7 Pro 64 bit Service Pack 1

Edited by 232showtime

ill get to that... i still need to learn and understand a lot of codes graduated.gif

Correct answer, learn to walk before you take on that marathon.

Link to post
Share on other sites
  • Moderators

232showtime,

Any saved file from earlier versions of the UDF could well fail when loaded using the latest Beta versions - I added some more items to the stored data and so the internal format is not quite the same. Is that what you tried to do?

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

@Melba23,

Hi, yes. I've downloaded your UDF from the 3rd page of this post, above my post.. I copy and paste your latest GUIListViewEx.au3 to include folder of AutoIT then I ran the script above your post using my laptop and I got error. I switched back to my desktop and ran the script it worked no issues.

right now my laptop battery is at 1% forgot the charger, dont know what is the problem, after work Ill reinstall autoit in my laptop.

ill get to that... i still need to learn and understand a lot of codes graduated.gif

Correct answer, learn to walk before you take on that marathon.

Link to post
Share on other sites
  • Moderators

232showtime,

I rather doubt it is the AutoIt installation. The line that produced the error is only called when loading a saved ListView - so I repeat my earlier question: were you trying to load a previously saved file when the error occurred?

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Moderators

232showtime,

And was this a file you had saved previously using the same script? If you attach the file in question I can perhaps take a look and see if I can see anything wrong.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Moderators

232showtime,

I have found a problem with the loading code - so thanks for the report. I am now working on how to fix it.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites
  • Melba23 changed the title to GUIListViewEx - New Version 13 Sep 21

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...