Jump to content

GUIListViewEx - BugFix Version 6 Apr 24


Melba23
 Share

Recommended Posts

  • Moderators

[NEW VERSION] - 27 May 16

Added:

  • Ability to choose HotKey to begin editing an item via new _GUIListViewEx_SetEditKey function

New zip in first post.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

Melba23,

I have a problem when using _GUICtrlListView_SetColumnWidth.  If I set one of the many columns to exceed the size of the _GUICtrlListView_Create window the nice border that is wrapping the listview gets disrupted and ends up with loads of gaps.  It seems to correct itself if I move to a different Tab and come back to the offending tab.  The same occurs if I resize a column past the width of the listview window.  

I am looking for a way to stop this bad behaviour.  I need to allow the users to resize past the size of the list view which automatically brings in the horizontal scroll bar that works well.  I may need to simply trigger a refresh using onevent capture of a column resize.  

any ideas how I can get around the problem or if you have seen this behaviour before.

Many Thanks

Link to comment
Share on other sites

Thanks for this; it's amazing!

2 gripes,

1. Sorting works fine on the first listview I populate, but then when I re-populate the same listview with different data, sorting misbehaves. It tries to sort the data which was originally in the listview; instead of the new data (code below).

2. The sorting has no option to sort numerically, so I replaced the Arraysort inside __GUIListViewEx_ColSort with _ArraySortMulti. This isn't related to/doesn't cause the above issue.

 

$aDataCheatSheet = IniReadSection("O2.ini", "SDB")
_ArrayDelete($aDataCheatSheet, 0)
$hListView_Right = _GUICtrlListView_Create($hGUI, "QID|Text|Title", 10, 500, 1000, 147, BitOR($LVS_SHOWSELALWAYS, $LVS_REPORT, $WS_BORDER))
    _GUICtrlListView_SetExtendedListViewStyle($hListView_Right, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_HEADERDRAGDROP))
    _GUICtrlListView_SetColumnWidth($hListView_Right, 0, 48)
    _GUICtrlListView_SetColumnWidth($hListView_Right, 1, 800)
    _GUICtrlListView_SetColumnWidth($hListView_Right, 2, 130)
    _GUICtrlListView_SetInsertMarkColor($hListView_Right, 0)
    For $i = 0 To UBound($aDataCheatSheet) - 1
        $aTextData = StringSplit($aDataCheatSheet[$i][1], "|")
        _GUICtrlListView_AddItem($hListView_Right, $aDataCheatSheet[$i][0])
        _GUICtrlListView_AddSubItem($hListView_Right, $i, $aTextData[1], 1)
        _GUICtrlListView_AddSubItem($hListView_Right, $i, $aTextData[2], 2)
    Next
    $aLV_List_Right = _GUIListViewEx_ReadToArray($hListView_Right, 0)
    $iLV_Right_Index = _GUIListViewEx_Init($hListView_Right, $aLV_List_Right, 0, 0x00FF00, Default, 1)
    _GUIListViewEx_SetEditStatus($iLV_Right_Index, "*", 1)

^This sorting works fine, but when I re-populate like this:

_GUICtrlListView_DeleteAllItems($hListView_Right)
$aDataCheatSheet = IniReadSection($sDefaultCsdb, $sDefaultCsType)
_ArrayDelete($aDataCheatSheet, 0)
For $i = 1 To UBound($aDataCheatSheet) - 1
    $aTextData = StringSplit($aDataCheatSheet[$i][1], "|")
    _GUICtrlListView_AddItem($hListView_Right, $aDataCheatSheet[$i][0])
    _GUICtrlListView_AddSubItem($hListView_Right, $i - 1, $aTextData[1], 1)
    _GUICtrlListView_AddSubItem($hListView_Right, $i - 1, $aTextData[2], 2)
Next

Sorting no longer works properly.

.ini format:

[SDB]
1=Test1|One
2=Test2|Two
10=Test10|Ten
100=Test100|OneHundred
200=Test200|TwoHundred
1000=Test1000|OneThousand

Is there another way to re-populate the listview in a way that sorting recognises?

Edited by Inpho
Link to comment
Share on other sites

  • Moderators

Inpho,

Not only do you have to delete all the items in the ListView, you need to remove it from the UDF and then re-initialise it as explained in this post from the previous UDF thread. That way you purge the original shadow array and the UDF will then sort the new one. Let me know if that does not work and let me see the code you used.

bourny,

Looking into the matter - but as I will have to write all the code myself it might take a while (hint: provide your own reproducer script and things go faster).

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

  • Moderators

bourny,

I wrote this simple script using the latest version of the UDF and I see no problem with the edits messing with the border when the columns are wider then the ListView itself:

#include <GUIConstantsEx.au3>

#include <GUIListViewEx.au3>

Global $aContent[5]

$hGUI = GUICreate("Test", 500, 500)

$cTab = GUICtrlCreateTab(10, 10, 480, 480)

$cTab_0 = GUICtrlCreateTabItem("Tab 0")

$cLV = GUICtrlCreateListView("Col 0|Col 1", 30, 50, 350, 350)

_GUICtrlListView_SetColumnWidth($cLV, 0, 250)
_GUICtrlListView_SetColumnWidth($cLV, 1, 550) ; Column wider than ListView <<<<<<<<<<<<<<<<<<<<<<<<<<<

For $i = 0 To 4
    $aContent[$i] = "Item " & $i & "-0|Item " & $i & "-1"
    GUICtrlCreateListViewItem($aContent[$i], $cLV)
Next

$iLV_Index = _GUIListViewEx_Init($cLV, $aContent)

_GUIListViewEx_SetEditStatus($iLV_Index, "1") ; Wide column editable <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

$cTab_1 = GUICtrlCreateTabItem("Tab 1")

GUICtrlCreateTabItem("")

GUISetState()

_GUIListViewEx_MsgRegister()

While 1

    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch

    _GUIListViewEx_EditOnClick()

WEnd

So I need a reproducer script from you if you want me to look into this further.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

Need help with it :( I need to columns with headers and grid. the right side needs to be editable and the left one constant.. also need to read those cells on right then .

Can someone drop me a example ? Cant get Listview any near what i need.

Link to comment
Share on other sites

  • Moderators

Sturmi,

What code have you tried that does not work? Post that and I will see how it might be tweaked.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

7 minutes ago, Melba23 said:

Sturmi,

What code have you tried that does not work? Post that and I will see how it might be tweaked.

M23

 

Deleted the other one but i wasnt far into it anyways.

 

$hGUI2 = GUICreate("Form1", 258, 442, 192, 124)
$Button1 = GUICtrlCreateButton("Button1", 8, 384, 243, 25, $WS_GROUP)
$List1 = GUICtrlCreateListView("", 8, 8, 241, 357)
GUICtrlCreateListViewItem("test|test2",$List1)
$Label2 = GUICtrlCreateLabel("Label2", 8, 416, 36, 17)
GUISetState(@SW_SHOW)

thats my gui. I have no clue how to make left side constant , right editable, read those values from right and make it not resizeable

Link to comment
Share on other sites

  • Moderators

Sturmi,

Not too difficult to fix:

#include <GUIConstantsEx.au3>
#include <Array.au3>

#include <GUIListViewEx.au3>

$hGUI2 = GUICreate("Form1", 258, 442, 192, 124)

$Button1 = GUICtrlCreateButton("Button1", 8, 384, 243, 25)

$List1 = GUICtrlCreateListView("Col 1|Col 2", 8, 8, 241, 357)
GUICtrlCreateListViewItem("test1|test2", $List1)

$Label2 = GUICtrlCreateLabel("Label2", 8, 416, 36, 17)

GUISetState(@SW_SHOW)

; Read ListView content into an array
$aContent = _GUIListViewEx_ReadToArray($List1)
; Initiate ListView
$iLV_Index = _GUIListViewEx_Init($List1, $aContent)
; Set column 1 as editable
_GUIListViewEx_SetEditStatus($iLV_Index, 1)
; Register required messages
_GUIListViewEx_MsgRegister()

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            ; Read content of ListView
            $aReadContent = _GUIListViewEx_ReturnArray($iLV_Index)
            ; Display content
            _ArrayDisplay($aReadContent, "ListView", Default, 8)
    EndSwitch
    ; Allow ListView editing
    _GUIListViewEx_EditOnClick()
WEnd

Might I suggest reading the guide to the UDF that I added to the zip file which explains in some detail how to use it.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

10 minutes ago, Melba23 said:

<snip>

thanks alot for quick and good solution for it ! Do you know a way to disable the column resizing ?

Edited by Melba23
Removed quote
Link to comment
Share on other sites

  • Moderators

Sturmi,

Take a look at this post.

M23

P.S. When you reply, please use the "Reply to this topic" button at the top of the thread or the "Reply to this topic" editor at the bottom rather than the "Quote" button - I know what I wrote and it just pads the thread unnecessarily.

 

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

  • Moderators

Sturmi,

My crystal ball is off for repolishing at the moment, so let me see the code that you are now using.

M23

Edit: I will look at adding a "fixed-width column" option to the UDF - thanks for the suggestion

Edited by Melba23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

_GUIListViewEx_Close must have been the only thing I didn't try, thanks man. Would you be interested in adding a feature for setting a column to hold numeric data (for sorting)? I hate destroying these beautiful UDF's for random requirements :P

Link to comment
Share on other sites

  • Moderators

Inpho,

Delighted you got it working. The "alpha/numeric" sort question is one which often arises (and not only for this UDF) - I will have a think about how it might be implemented, but do not hold your breath.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

ArrayMultiSort is the only UDF I found that can sort numerically. I'll just use Number while adding listview items, not much finger work for me.

When pressing Tab while editing the final cell in a row, I would expect it to move to the first column of the next row, if it exists.

Link to comment
Share on other sites

  • Moderators

Inpho,

Do not lose hope, I am looking at how to offer a choice: the standard _ArraySort function by default, or a user-defined algorithm as long as it will accept similar parameters.

Quote

When pressing Tab while editing the final cell in a row, I would expect it to move to the first column of the next row, if it exists.

A design choice - I have set it up so that it either exits, stays in place, or loops back to the first column - depending on the value of the $iEditMode parameter passed to _GUIListViewEx_EditOnClick. If you want something different - you code it!

M23

Edited by Melba23
Typo

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

@Melba23 sorry for wasting your time! There you go

 

Func gui2()
$hGUI2 = GUICreate("Form1", 258, 442, 192, 124)

$Button1 = GUICtrlCreateButton("Button1", 8, 384, 243, 25)

$List1 = GUICtrlCreateListView("Data|Your Info", 8, 8, 241, 357,-1,$LVS_EX_GRIDLINES)
GUICtrlCreateListViewItem("            |           ", $List1)
GUICtrlCreateListViewItem("Test1:|           ", $List1)
GUICtrlCreateListViewItem("            |           ", $List1)
GUICtrlCreateListViewItem("Test2: |           ", $List1)
GUICtrlCreateListViewItem("            |           ", $List1)
GUICtrlCreateListViewItem("Test3:|           ", $List1)
GUICtrlCreateListViewItem("            |           ", $List1)
GUICtrlCreateListViewItem("Test5:|           ", $List1)
_GUICtrlListView_SetColumnWidth($List1, 0, 117)
_GUICtrlListView_SetColumnWidth($List1, 1, 117)
$Label2 = GUICtrlCreateLabel("Label2", 8, 416, 36, 17)

GUISetState(@SW_SHOW)

; Read ListView content into an array
$aContent = _GUIListViewEx_ReadToArray($List1)
; Initiate ListView
$iLV_Index = _GUIListViewEx_Init($List1, $aContent)
; Set column 1 as editable
_GUIListViewEx_SetEditStatus($iLV_Index, 1)
; Register required messages
_GUIListViewEx_MsgRegister()

ControlDisable($hGUI2, "", HWnd(_GUICtrlListView_GetHeader($List1)))

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            GUIDelete($hGUI2)
                 ExitLoop
        Case $Button1
            ; Read content of ListView
            $aReadContent = _GUIListViewEx_ReturnArray($iLV_Index)
            ; Display content
            _ArrayDisplay($aReadContent, "ListView", Default, 8)
    EndSwitch
    ; Allow ListView editing

WEnd

    _GUIListViewEx_EditOnClick()

 EndFunc

 

Link to comment
Share on other sites

  • Melba23 changed the title to GUIListViewEx - BugFix Version 6 Apr 24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...