sammy1983 Posted May 23, 2016 Share Posted May 23, 2016 Hi, How to calculate difference between 2 dates? $Datee = "2016-06-14" $Date = "2016-05-01" The script should identify Registration Number whenever $Date2 is lesser than $Date1. Below is my code but it doesn't seem to work. $j = _DateDiff('D', $Datee, $Date) If $j<0 then MsgBox(0, "", "Success" Endif Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 23, 2016 Moderators Share Posted May 23, 2016 sammy1983, You do not have the correct format for the dates - look in the Help file under _DateDiff to see how they need to be formatted. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
BrewManNH Posted May 23, 2016 Share Posted May 23, 2016 Actually, the help file omits the correct date formats for _DateDiff it will use the same formats for dates as _DateIsValid and _DateTimeSplit. Also, after fixing the errors in the OP the code works for me. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
sammy1983 Posted May 23, 2016 Author Share Posted May 23, 2016 Oh ok. It should be in "YYYY/MM/DD[ HH:MM:SS]" format. Gotcha. One more clarification required. Is it mandatory to have "[ HH:MM:SS]"? Can't it be calculated using just "YYYY/MM/DD"? Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 23, 2016 Moderators Share Posted May 23, 2016 sammy1983, As always in the Help file, anything within [ ] is optional - so "YYYY/MM/DD" will work on its own. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
sammy1983 Posted May 23, 2016 Author Share Posted May 23, 2016 Wow. Great!!! Thanks for the all the clarification, Melba. Glad to see you replying for my post. Cheers. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 23, 2016 Moderators Share Posted May 23, 2016 sammy1983, My pleasure, as always. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 23, 2016 Moderators Share Posted May 23, 2016 BrewManNH, Quote Actually, the help file omits the correct date formats for _DateDiff Not in my Help file: Quote $sStartDate Input Start date in the format "YYYY/MM/DD[ HH:MM:SS]" $sEndDate Input End date in the format "YYYY/MM/DD[ HH:MM:SS]" M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
BrewManNH Posted May 23, 2016 Share Posted May 23, 2016 Those aren't the only date formats it accepts. The function uses _DateTimeSplit to separate the date and times into arrays, and that function accepts different formats. It also uses _DateIsValid to verify the date is correctly formatted, which accepts the same formats as _DateTimeSplit. Unless someone is planning on rewriting the function, then _DateDiff accepts the same formats as the other 2, just undocumented. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
AdamUL Posted May 23, 2016 Share Posted May 23, 2016 This is also in the help file for _DateDiff. Quote Remarks Valid dates must be between "2000/01/01 00:00:00". and "3000/12/31 23:59:59" See _DateTimeSplit() for other possible variations of the start and end date formats. Adam Link to comment Share on other sites More sharing options...
BrewManNH Posted May 23, 2016 Share Posted May 23, 2016 Thanks AdamUL, missed that part. So it is documented in there I just missed the reference. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now