Jump to content

png with background transparent into gui without border


Recommended Posts

Here is a small example (from @UEZ:

#include <ButtonConstants.au3>
#include <MsgBoxConstants.au3>
#include <StructureConstants.au3>
#include <WinAPIConstants.au3>
#include <GDIPlus.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>


_GDIPlus_Startup()
Global Const $SC_DRAGMOVE = 0xF012
Global $iW, $iH, $hImage, $hBitmap, $hGUI
$hImage = _GDIPlus_BitmapCreateFromFile("C:\Program Files\AutoIt3\Examples\GUI\Torus.png")
$hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage)
$iW = _GDIPlus_ImageGetWidth($hImage)
$iH = _GDIPlus_ImageGetHeight($hImage)
$hGUI = GUICreate("", $iW, $iH, -1, -1, $WS_POPUP, $WS_EX_LAYERED)
GUISetState()
_WinAPI_BitmapDisplayTransparentInGUI($hBitmap, $hGUI)
GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN")


Do
Until GUIGetMsg() = $GUI_EVENT_CLOSE

_WinAPI_DeleteObject($hBitmap)
_GDIPlus_BitmapDispose($hImage)
_GDIPlus_Shutdown()
GUIDelete()

Func _WinAPI_BitmapDisplayTransparentInGUI(ByRef $hHBitmap, ByRef $hGUI, $iOpacity = 0xFF, $bReleaseGDI = True)
    If Not BitAND(GUIGetStyle($hGUI)[1], $WS_EX_LAYERED) = $WS_EX_LAYERED Then Return SetError(1, 0, 0)
    Local $tDim = DllStructCreate($tagBITMAP)
    If Not _WinAPI_GetObject($hHBitmap, DllStructGetSize($tDim), DllStructGetPtr($tDim)) Then Return SetError(2, 0, 0)
    Local $tSize = DllStructCreate($tagSIZE), $tSource = DllStructCreate($tagPOINT), $tBlend = DllStructCreate($tagBLENDFUNCTION)
    Local Const $hScrDC = _WinAPI_GetDC(0), $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC), $hOld = _WinAPI_SelectObject($hMemDC, $hHBitmap)
    $tSize.X = $tDim.bmWidth
    $tSize.Y = $tDim.bmHeight
    $tBlend.Alpha = $iOpacity
    $tBlend.Format = 1
    _WinAPI_UpdateLayeredWindow($hGUI, $hScrDC, 0, DllStructGetPtr($tSize), $hMemDC, DllStructGetPtr($tSource), 0, DllStructGetPtr($tBlend), $ULW_ALPHA)
    _WinAPI_ReleaseDC(0, $hScrDC)
    _WinAPI_SelectObject($hMemDC, $hOld)
    _WinAPI_DeleteDC($hMemDC)
    If $bReleaseGDI Then _WinAPI_DeleteObject($hHBitmap)
    Return True
EndFunc

Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam)
    _SendMessage($hGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0)
EndFunc   ;==>_WM_LBUTTONDOWN

 

Edited by AutoBert
Link to post
Share on other sites

Here a other example I also think it is from UEZ

#include <GDIPlus.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

 _GDIPlus_Startup()

$hSplashlogo = _GDIPlus_ImageLoadFromFile("C:\Program Files (x86)\AutoIt3\Examples\GUI\Torus.png")


$logoheight = (@DesktopHeight/2) - (_GDIPlus_ImageGetHeight($hSplashlogo)/2) - 50
$logowidth = (@DesktopWidth /2) - (_GDIPlus_ImageGetWidth($hSplashlogo)/2)
$SplashGUIlogo = GUICreate("", _GDIPlus_ImageGetWidth($hSplashlogo), _GDIPlus_ImageGetHeight($hSplashlogo), $logowidth, $logoheight, $WS_POPUP, BitOR($WS_EX_LAYERED,$WS_EX_TOOLWINDOW))
_SetBitmap($SplashGUIlogo, $hSplashlogo, 255, _GDIPlus_ImageGetWidth($hSplashlogo), _GDIPlus_ImageGetHeight($hSplashlogo))
GUISetState(@SW_SHOWNA, $SplashGUIlogo)


While 1
    Sleep(20)
WEnd

 _GDIPlus_Shutdown()


Func _SetBitmap($hGUI, $hImage, $iOpacity, $n_width = 200, $n_height = 200)
    Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend

    $hScrDC = _WinAPI_GetDC(0)
    $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC)
    $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage)
    $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap)
    $tSize = DllStructCreate($tagSIZE)
    $pSize = DllStructGetPtr($tSize)
    DllStructSetData($tSize, "X", $n_width)
    DllStructSetData($tSize, "Y", $n_height)
    $tSource = DllStructCreate($tagPOINT)
    $pSource = DllStructGetPtr($tSource)
    $tBlend = DllStructCreate($tagBLENDFUNCTION)
    $pBlend = DllStructGetPtr($tBlend)
    DllStructSetData($tBlend, "Alpha", $iOpacity)
    DllStructSetData($tBlend, "Format", 1)
    _WinAPI_UpdateLayeredWindow($hGUI, $hScrDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA)
    _WinAPI_ReleaseDC(0, $hScrDC)
    _WinAPI_SelectObject($hMemDC, $hOld)
    _WinAPI_DeleteObject($hBitmap)
    _WinAPI_DeleteDC($hMemDC)
EndFunc   ;==>_SetBitmap

 

Edited by nend
Link to post
Share on other sites
  • 2 years later...
  • 2 years later...
On 5/24/2016 at 3:27 PM, nend said:

Here a other example I also think it is from UEZ

#include <GDIPlus.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

 _GDIPlus_Startup()

$hSplashlogo = _GDIPlus_ImageLoadFromFile("C:\Program Files (x86)\AutoIt3\Examples\GUI\Torus.png")


$logoheight = (@DesktopHeight/2) - (_GDIPlus_ImageGetHeight($hSplashlogo)/2) - 50
$logowidth = (@DesktopWidth /2) - (_GDIPlus_ImageGetWidth($hSplashlogo)/2)
$SplashGUIlogo = GUICreate("", _GDIPlus_ImageGetWidth($hSplashlogo), _GDIPlus_ImageGetHeight($hSplashlogo), $logowidth, $logoheight, $WS_POPUP, BitOR($WS_EX_LAYERED,$WS_EX_TOOLWINDOW))
_SetBitmap($SplashGUIlogo, $hSplashlogo, 255, _GDIPlus_ImageGetWidth($hSplashlogo), _GDIPlus_ImageGetHeight($hSplashlogo))
GUISetState(@SW_SHOWNA, $SplashGUIlogo)


While 1
    Sleep(20)
WEnd

 _GDIPlus_Shutdown()


Func _SetBitmap($hGUI, $hImage, $iOpacity, $n_width = 200, $n_height = 200)
    Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend

    $hScrDC = _WinAPI_GetDC(0)
    $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC)
    $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage)
    $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap)
    $tSize = DllStructCreate($tagSIZE)
    $pSize = DllStructGetPtr($tSize)
    DllStructSetData($tSize, "X", $n_width)
    DllStructSetData($tSize, "Y", $n_height)
    $tSource = DllStructCreate($tagPOINT)
    $pSource = DllStructGetPtr($tSource)
    $tBlend = DllStructCreate($tagBLENDFUNCTION)
    $pBlend = DllStructGetPtr($tBlend)
    DllStructSetData($tBlend, "Alpha", $iOpacity)
    DllStructSetData($tBlend, "Format", 1)
    _WinAPI_UpdateLayeredWindow($hGUI, $hScrDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA)
    _WinAPI_ReleaseDC(0, $hScrDC)
    _WinAPI_SelectObject($hMemDC, $hOld)
    _WinAPI_DeleteObject($hBitmap)
    _WinAPI_DeleteDC($hMemDC)
EndFunc   ;==>_SetBitmap

 

i know this  nearly 5 years ago, but can maybe @UEZ explain me how to get on top of this gui comboboxes or sliders or labels

Best Regards

Link to post
Share on other sites

Hi Räuber @Hotzenplotz

try this:

#include <GDIPlus.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WinAPIConstants.au3>
#include <WinAPISysWin.au3>
#include <WindowsConstants.au3>

 _GDIPlus_Startup()

Global Const $SC_DRAGMOVE = 0xF012

$hSplashlogo = _GDIPlus_ImageLoadFromFile("C:\Program Files (x86)\AutoIt3\Examples\GUI\Torus.png")

$iw = _GDIPlus_ImageGetWidth($hSplashlogo)
$ih = _GDIPlus_ImageGetHeight($hSplashlogo)
$SplashGUIlogo = GUICreate("", $iw, $ih, -1, -1, $WS_POPUP,  $WS_EX_LAYERED)
_SetBitmap($SplashGUIlogo, $hSplashlogo, 255, $iw, $ih)
$hGUI_c = GUICreate("Test", $iw, $ih, 0, 0, $WS_POPUP, BitOR($WS_EX_LAYERED, $WS_EX_MDICHILD), $SplashGUIlogo)
GUISetBkColor(0x123456, $hGUI_c)
_WinAPI_SetLayeredWindowAttributes($hGUI_c, 0x123456)
$idComboBox = GUICtrlCreateCombo("Item 1",  $iw / 2 - 35, 20, 50, 20)
GUICtrlSetData($idComboBox, "Item 2|Exit", "Item 2")
$idButton_Close = GUICtrlCreateButton("X", $iw / 2 - 30, $ih - 60, 35, 25)
$idLabel = GUICtrlCreateLabel("Test GUI", 0, $ih / 2 - 15, $iw - 20, 20, BitOR($SS_CENTER, $SS_CENTERIMAGE, $SS_SUNKEN))
GUICtrlSetBkColor(-1, 0x404040)
GUICtrlSetColor(-1, 0xFFFFFF)
GUISetState(@SW_SHOWNA, $SplashGUIlogo)
GUISetState(@SW_SHOW, $hGUI_c)

GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN")

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE, $idButton_Close
            ExitLoop
        Case $idComboBox
            $sComboRead = GUICtrlRead($idComboBox)
            If $sComboRead = "Exit" Then ExitLoop
    EndSwitch
WEnd

GUIDelete($hGUI_c)
GUIDelete($SplashGUIlogo)
_GDIPlus_ImageDispose($hSplashlogo)
_GDIPlus_Shutdown()
Exit

Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam)
    _SendMessage($SplashGUIlogo, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0)
EndFunc   ;==>_WM_LBUTTONDOWN

Func _SetBitmap($hGUI, $hImage, $iOpacity, $n_width = 200, $n_height = 200)
    Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend

    $hScrDC = _WinAPI_GetDC(0)
    $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC)
    $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage)
    $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap)
    $tSize = DllStructCreate($tagSIZE)
    $pSize = DllStructGetPtr($tSize)
    DllStructSetData($tSize, "X", $n_width)
    DllStructSetData($tSize, "Y", $n_height)
    $tSource = DllStructCreate($tagPOINT)
    $pSource = DllStructGetPtr($tSource)
    $tBlend = DllStructCreate($tagBLENDFUNCTION)
    $pBlend = DllStructGetPtr($tBlend)
    DllStructSetData($tBlend, "Alpha", $iOpacity)
    DllStructSetData($tBlend, "Format", 1)
    _WinAPI_UpdateLayeredWindow($hGUI, $hScrDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA)
    _WinAPI_ReleaseDC(0, $hScrDC)
    _WinAPI_SelectObject($hMemDC, $hOld)
    _WinAPI_DeleteObject($hBitmap)
    _WinAPI_DeleteDC($hMemDC)
EndFunc   ;==>_SetBitmap

Should look like this:

Result-W10.jpg

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Link to post
Share on other sites

UEZ ended before us :)
This is what I had so far, based on AutoBert's 1st post above (another script by UEZ), after having added this :

$hGUI2 = GUICreate("GUI2", 120, 120, -1, -1, $WS_POPUP, BitOr($WS_EX_LAYERED, $WS_EX_MDICHILD), $hGUI)
GUISetBkColor( 0xABCDEF, $hGUI2) ; transparent
_WinAPI_SetLayeredWindowAttributes($hGUI2, 0xABCDEF)
GUICtrlCreateLabel("HELLO THERE", 60, 12, 60, 60)
GUICtrlSetColor(-1, 0xFFFF00) ; yellow
GUICtrlSetFont(-1, 10, 600)
GUICtrlSetBkColor(-1, $GUI_BKCOLOR_TRANSPARENT)

582580920_pnglabelintransparentgui.png.733804fda88e961d6996fb24d733fc44.png

@UEZ : could you please explain BitOR($WS_POPUP, $WS_CHILD) in your script ?
I always read that these two shouldn't be found together, also it seems to work with $WS_POPUP only.
Thanks !

 

Link to post
Share on other sites
21 minutes ago, pixelsearch said:

@UEZ : could you please explain BitOR($WS_POPUP, $WS_CHILD) in your script ?
I always read that these two shouldn't be found together, also it seems to work with $WS_POPUP only.
Thanks !

This is a leftover from the coding session - can be removed as MS states: "The window is a child window. A window with this style cannot have a menu bar. This style cannot be used with the WS_POPUP style."

 

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Link to post
Share on other sites
Just now, pixelsearch said:

Great !
Glad to have you back :)

Yes also i am new here read alot posts and used a lot of the knowledge of @uez till now.

Danke das du @UEZmir geholfen hast. mit deinen script hier ist mein projekt nahezu perfekt für mich

Link to post
Share on other sites

another question,

 

why 

this works 

$close = GUICtrlCreateButton("", 363, 622, 75,35)
GUICtrlSetOnEvent($close, "Close")
GUICtrlSetTip($close, "Ausschalten")

but if i try this with GUICtrlCreateLabel the event not is not working

Best Regards

Link to post
Share on other sites
5 minutes ago, Hotzenplotz said:

another question,

 

why 

this works 

$close = GUICtrlCreateButton("", 363, 622, 75,35)
GUICtrlSetOnEvent($close, "Close")
GUICtrlSetTip($close, "Ausschalten")

but if i try this with GUICtrlCreateLabel the event not is not working

Best Regards

seems the label must have a text to work, can i get it working without a text 

Link to post
Share on other sites

@Hotzenplotz : probably because you created the label without caption, like this :

$idLabel = GUICtrlCreateLabel("", ...)

Just add some spaces as caption ("     ", ...) using the _StringRepeat() function if you prefer, maybe add a $SS_SUNKEN style to the label during the coding session, to display a border around your label etc...

@UEZ : in your script just above, or even in your other script found in AutoBert's post at the beginning of this thread, can't we bypass the functions _SetBitmap() or _WinAPI_BitmapDisplayTransparentInGUI() and replace them with a one-liner _WinAPI_UpdateLayeredWindowEx(), like this :

#include <GDIPlus.au3>
#include <GUIConstantsEx.au3>
#include <WinAPISysWin.au3>
#include <WindowsConstants.au3>

Global Const $SC_DRAGMOVE = 0xF012
Global $hGUI

$sFileName = @ScriptDir & "\torus.png"
If Not FileExists($sFileName) Then Exit MsgBox(0, "Exit", "Image not found")

_GDIPlus_Startup()
$hImage = _GDIPlus_BitmapCreateFromFile($sFileName)
$hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage)
$iW = _GDIPlus_ImageGetWidth($hImage)
$iH = _GDIPlus_ImageGetHeight($hImage)

$hGUI = GUICreate("", $iW, $iH, -1, -1, $WS_POPUP, BitOr($WS_EX_LAYERED, $WS_EX_TOPMOST))
_WinAPI_UpdateLayeredWindowEx($hGUI, -1, -1, $hBitmap) ; <=============================

GUISetState(@SW_SHOW)
GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN")

Do
Until GUIGetMsg() = $GUI_EVENT_CLOSE

GUIDelete()
_WinAPI_DeleteObject($hBitmap)
_GDIPlus_BitmapDispose($hImage)
_GDIPlus_Shutdown()

Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam)
    _SendMessage($hGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0)
EndFunc   ;==>_WM_LBUTTONDOWN

Thanks for your advice

Edited by pixelsearch
added exit test (in case image not found)
Link to post
Share on other sites
3 hours ago, pixelsearch said:

@UEZ : in your script just above, or even in your other script found in AutoBert's post at the beginning of this thread, can't we bypass the functions _SetBitmap() or _WinAPI_BitmapDisplayTransparentInGUI() and replace them with a one-liner _WinAPI_UpdateLayeredWindowEx(), like this :

You are right, under the hood it is the same function. I don't know each of the Winapi GDI function which Yashied has added to his famous WinAPIEx UDF. WinAPIEx UDF was added to Autoit meanwhile. 

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Link to post
Share on other sites

@pixelsearch thanks, some things to easy if you know them ^^

now finally i am nearly finished, but i have one annoying thing. if i start the script its an streaming radio, i put in labels to switch between favorite stations, and if i change the stations the name of it and fav numbers are shown on the script in an other label with text. the strange thing is after i start the script and i press a fav then it change the station but the label with the info stays empty until i press the fav again, then the info is shown.'

Solution found in call the guis into the fav functions

Edited by Hotzenplotz
solution found
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
    • By CYBRIX
      So I am a person who has learned programming off the internet, without structured courses, and I'm trying to create a UI element that can be used like "GUICtrlCreate...".

      I'd like to get some kind of insight on how to improve the code of a Graph element that I have created.
      I am unfamiliar on the standards for creating such UI elements, and assume I'll get some valuable insight here.
       
      Here's some sample code: (I tried to make it look a bit less upsetting to those who know better, but be warned: not pretty.)
      #include <WinAPISys.au3> #include <WinAPI.au3> #include <WinAPIGdi.au3> #include <Array.au3> #include <WindowsConstants.au3> #include <GUIConstants.au3> Local $hWnd = GUICreate("Test", 200, 200) GUISetState(@SW_SHOW, $hWnd) Local $hGraph = _GraphStartUp($hWnd, 10, 30, 180, 180) Local $nData, $nDataMax = 1000, $hDataTimer = TimerInit() While GUIGetMsg() <> $GUI_EVENT_ClOSE If TimerDiff($hDataTimer) >= 150 Then $nData = Random(0, $nDataMax) _UpdateGraph($nData) $hDataTimer = TimerInit() EndIf Sleep(20) WEnd _GraphShutDown($hWnd, $hGraph) Exit Func _GraphStartUp($hWnd, $x, $y, $w, $h, $nUpdateTimes = 1000, $nResolution = 60) Global $hBluePen = _WinAPI_CreatePen($PS_SOLID, 2, _WinAPI_RGB(220, 0, 0)) Global $hGreyPen = _WinAPI_CreatePen($PS_DASH, 1, _WinAPI_RGB(100, 100, 100)) Global $hBlackPen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(0, 0, 0)) Global $hWhitePen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(255, 255, 255)) Global $nGraphRes = $nResolution Global $aGraphData[$nGraphRes + 1] For $i = 2 To $nGraphRes $aGraphData[$i] = 0 Next Global $hWinDC = _WinAPI_GetWindowDC($hWnd) Global $nGraphX = $x Global $nGraphY = $y Global $nGraphWidth = $w Global $nGraphHeight = $h Global $nGraphXUnit = $nGraphWidth / ($nGraphRes - 1) Global $nGraphBottomY = $nGraphY + $nGraphHeight Global $nGraphMaxX = $nGraphX + $nGraphWidth Global $aUpdateArea[4][2] = [[$nGraphX - 1, $nGraphY - 1], [$nGraphX - 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphY - 1]] Global $pUpdateAreaRgn = _WinAPI_CreatePolygonRgn($aUpdateArea) Global $pTextRect = _WinAPI_CreateRectEx($nGraphX + 1, $nGraphY + 1, $nGraphWidth / 2, $nGraphHeight / 4) Global $nGreatestValue = 1 GLobal $pGraphArea = _WinAPI_CreateRectEx($nGraphX - 7, $nGraphY - 26, $nGraphWidth + 14, $nGraphHeight + 2) Global $pDrawCall = DllCallbackRegister('_DrawGraph', 'none', '') Global $pGraphTimer = _WinAPI_SetTimer($hWnd, 567891234, $nUpdateTimes, DllCallbackGetPtr($pDrawCall)) _DrawGraph() Return $pGraphTimer EndFunc Func _DrawGraph() Global $hPen $nGreatestValue = _ArrayMax($aGraphData, 1, 1) $hPen = _WinAPI_SelectObject($hWinDC, $hWhitePen) _WinAPI_PaintRgn($hWinDC, $pUpdateAreaRgn) $hPen = _WinAPI_SelectObject($hWinDC, $hGreyPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphMaxX, $nGraphY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY + ($nGraphHeight / 2), $nGraphMaxX, $nGraphY + ($nGraphHeight / 2)) _WinAPI_DrawLine($hWinDC, $nGraphMaxX, $nGraphY, $nGraphMaxX, $nGraphBottomY) $hPen = _WinAPI_SelectObject($hWinDC, $hBluePen) For $i = 1 To $nGraphRes - 1 _WinAPI_DrawLine($hWinDC, $nGraphX + (($i - 1) * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i] / $nGreatestValue * $nGraphHeight), $nGraphX + ($i * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i + 1] / $nGreatestValue * $nGraphHeight)) Next $hPen = _WinAPI_SelectObject($hWinDC, $hBlackPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphBottomY, $nGraphMaxX, $nGraphBottomY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphX, $nGraphBottomY) _WinAPI_DrawText($hWinDC, Round($aGraphData[$nGraphRes], 2), $pTextRect, $DT_LEFT) EndFunc Func _UpdateGraph($nData) _ArrayAdd($aGraphData, $nData) _ArrayDelete($aGraphData, 1) EndFunc Func _GraphShutDown($hWnd, $pGraphTimer) _WinAPI_SelectObject($hWinDC, $hPen) _WinAPI_DeleteObject($hBlackPen) _WinAPI_DeleteObject($hGreyPen) _WinAPI_DeleteObject($hBluePen) _WinAPI_DeleteObject($hWhitePen) _WinAPI_ReleaseDC($hWnd, $hWinDC) _WinAPI_KillTimer($hWnd, $pGraphTimer) DllCallbackFree($pDrawCall) _WinAPI_RedrawWindow($hWnd, $pGraphArea) EndFunc  
    • By mLipok
      I check this snippet:
      https://www.autoitscript.com/wiki/Snippets_(_GUI_)#GUI_With_Scrollable_TabItem
      Modified them and I refactored. That's because I needed to adapt it to my needs (I'll write later).
      I thought I understood how it works.
      But I was wrong.
       
      This is my example which is showing what I want to achieve.
      #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <GuiScrollBars.au3> #include <GUIScrollbars_Ex.au3> #include <StringConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> GUIRegisterMsg($WM_VSCROLL, WM_VSCROLL) _Example() Func _Example() Local $i_Count = 30 Local $a_Options_List[$i_Count + 1] $a_Options_List[0] = $i_Count For $i = 1 To $i_Count $a_Options_List[$i] = 'Test #' & $i Next ConsoleWrite("- " & _my_gui_Wybierz('Testing', $a_Options_List) & @CRLF) EndFunc ;==>_Example Func _my_gui_Wybierz($s_Description, $a_Options_List = "", $i_Left = Default, $i_Top = Default, $i_Width = Default, $hWnd_Parent = 0) ;~ WinSetOnTop($ACROBAT_TITLE, "", $WINDOWS_NOONTOP ) If $i_Left = Default Then $i_Left = -1 If $i_Top = Default Then $i_Top = -1 If $i_Width = Default Then $i_Width = 400 #Region _my_gui_Wybierz - GUI Creation Local $i_Height = 600 Local $hWND_DateForm = GUICreate("", $i_Width, $i_Height, $i_Left, $i_Top, BitOR(0, $WS_SIZEBOX), -1, $hWnd_Parent) WinSetOnTop($hWND_DateForm, "", $WINDOWS_ONTOP) Local $hChild = GUICreate("Scroll area", $i_Width - 15, $i_Height - 40, 0, 0, $WS_POPUP, $WS_EX_MDICHILD, $hWND_DateForm) _GUIScrollBars_Init($hChild, -1) _GUIScrollBars_ShowScrollBar($hChild, $SB_HORZ, False) _GUIScrollBars_ShowScrollBar($hChild, $SB_VERT, True) ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) GUICtrlCreateLabel("", 10, 7, $i_Width - 45, 80) Local $id_Label1 = GUICtrlCreateLabel("", 10, 7 + 5, $i_Width - 45, 80 - 5) GUICtrlSetBkColor(-1, 0x88AABB) Local $a_List_of_Button_ID[$a_Options_List[0] + 1] For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 0 And $IDX_Item < 10 Then $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ $IDX_Item & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) Else $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ Chr(Asc('A') + $IDX_Item - 10) & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) EndIf Next Local $temp_var = $a_Options_List[0] Local $a_accelerators[($temp_var * 2) + 1][2] Local $i_Accelerators_Counter = 0 Local $i_Accelerator_Char1 = '' Local $i_Accelerator_Char2 = '' For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 9 Then $i_Accelerator_Char1 = Chr(Asc('A') + $IDX_Item - 10) $i_Accelerator_Char2 = Chr(Asc('a') + $IDX_Item - 10) Else $i_Accelerator_Char1 = "{NUMPAD" & $IDX_Item & "}" ;Chr(48 + $IDX_Item) $i_Accelerator_Char2 = $IDX_Item EndIf $a_accelerators[($IDX_Item * 2) - 1][0] = $i_Accelerator_Char1 $a_accelerators[($IDX_Item * 2) - 1][1] = $a_List_of_Button_ID[$IDX_Item] $a_accelerators[($IDX_Item * 2) - 1 + 1][0] = $i_Accelerator_Char2 $a_accelerators[($IDX_Item * 2) - 1 + 1][1] = $a_List_of_Button_ID[$IDX_Item] $i_Accelerators_Counter += 2 Next $a_accelerators[0][0] = $i_Accelerators_Counter GUISetAccelerators($a_accelerators, $hChild) GUICtrlSetData($id_Label1, $s_Description) GUISetState(@SW_SHOW, $hWND_DateForm) GUISetState(@SW_SHOW, $hChild) #EndRegion _my_gui_Wybierz - GUI Creation #Region - _my_gui_Wybierz - Handling messages Local $i_Selected_item = 0 Local $v_Return_Value = "" Local $a_GUI_Messages While 1 $a_GUI_Messages = GUIGetMsg($GUI_EVENT_ARRAY) If $a_GUI_Messages[0] = $GUI_EVENT_NONE Then ; do nothing ElseIf $a_GUI_Messages[1] = $hWND_DateForm Then If $a_GUI_Messages[0] = $GUI_EVENT_CLOSE Then ExitLoop ElseIf $a_GUI_Messages[1] <> $hChild Then ; .... Else For $IDX_Check = 1 To $a_Options_List[0] If $a_List_of_Button_ID[$IDX_Check] = $a_GUI_Messages[0] Then $v_Return_Value = GUICtrlRead($a_List_of_Button_ID[$IDX_Check]) $i_Selected_item = $IDX_Check $v_Return_Value = _RegExpFirstMatch($v_Return_Value, '.+?\. (.+)') ExitLoop 2 ; exit from ForNext and also from WhileWend EndIf Next EndIf WEnd #EndRegion - _my_gui_Wybierz - Handling messages GUIDelete($hChild) GUIDelete($hWND_DateForm) Return SetError(0, $i_Selected_item, $v_Return_Value) EndFunc ;==>_my_gui_Wybierz Func WM_VSCROLL($hWnd, $msg, $wParam, $lParam) #forceref $msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ; Set the position and then retrieve it. Due to adjustments ; by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Func _RegExpFirstMatch($s_Data, $s_Pattern) Local $a_Results = StringRegExp($s_Data, $s_Pattern, $STR_REGEXPARRAYGLOBALMATCH) If @error Then Return SetError(@error, @extended, '') Return SetError(0, UBound($a_Results), $a_Results[0]) EndFunc ;==>_RegExpFirstMatch  
      I have few problems with this code, and many question related to them.
      Question 1:
      How to make the Scrollbars to work ?
      I mean to scroll buttons.
      Question 2:
      Do I must to ues Child Window, or is it possible to scroll buttons without using Child Window ?
      Question 3:
      Why after uncommenting this following line:
      ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) the ScrollBar disapears ?
    • By Mo0C0w
      Hey guys!
      I just started working with the GUI yesterday and it has only brought more fun to the Autoit adventure  
      Basically I have a GUI windows that opens and based on the selection of the combo box the button will do something different. This specific scenario I am talking about the Client Update Verification  combo selection. When selected and the button is pressed my second gui window opens. As of now if I only paste comp1 or comp2 by itself it works correctly, but if I paste both, it has a fit.
      What would the correct way to do this be? Any help or examples, would be greatly appreciated! Thank you in advance
       
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Client_List.au3> #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiibox v4.kxf Global $Form1_1 = GUICreate("Plexii", 336, 419, 1548, 586) GUISetBkColor(0xFFFFFF) Global $Pic1 = GUICtrlCreatePic("C:\Users\dnoble\Pictures\plexii.jpg", 41, 0, 252, 268, BitOR($GUI_SS_DEFAULT_PIC,$SS_CENTERIMAGE)) Global $Label2 = GUICtrlCreateLabel("Select Test", 125, 280, 95, 24) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $Combo2 = GUICtrlCreateCombo("Select Test", 39, 312, 257, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "Client Update Verification|Bids") GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") Global $Button1 = GUICtrlCreateButton("Proceed", 111, 352, 129, 33) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Combo2) = "Client Update Verification" Then _Form2() ;clientupdateverification() EndSwitch WEnd Func _Form2() #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiiboxclientupdate verification.kxf $Form1_1 = GUICreate("Plexii", 336, 521, 866, 454) GUISetBkColor(0xFFFFFF) $Edit1 = GUICtrlCreateEdit("", 57, 72, 241, 345) GUICtrlSetData(-1, "Edit1") $Button1 = GUICtrlCreateButton("Execute", 95, 440, 145, 41) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Edit1) = "comp1" Then comp1() If GUICtrlRead($Edit1) = "comp2" Then comp2() EndSwitch WEnd EndFunc  

    • By XGamerGuide
      I'm trying to assign a faint text in the background to an input field that disappears after the input has started. This should have a certain color such as gray.
×
×
  • Create New...