waiwei Posted May 27, 2016 Share Posted May 27, 2016 (edited) In a stock software called "大智慧2", When I try to get the handle of this Control (the quasi-window control in the large red box in the image below), I found that the Window Info Tool can get its handle. But when I try to use ControlGetHandle() with the attributes of that control given by WindowInfoTool ( e.g. Class and ID in the red circle), I just got 0x00000000. the CODE is below: ________________________________________________________________________________________ $hWnd = WinGetHandle("[title:大智慧]") ;获取任务栏窗口的句柄 $hWnd2 = hwnd("0x00000000000B08A2") $hCtrl = ControlGetHandle($hWnd,"","class:AfxFrameOrView100;instance:1;ID:59648") $hCtrl1 = hwnd("0x0000000000010D58") $i = 0 ;WinSetState($hWnd, "", @SW_HIDE) ;使用任务栏句柄来隐藏任务栏 ;Sleep(1000) ;休息1 秒 ;WinSetState($hWnd, "", @SW_SHOW) ;恢复显示任务栏 msgbox(0,@error,$hWnd) msgbox(0,@error,$hCtrl) winactivate($hWnd) winactivate($hWnd) While $i<20 $i=$i+1 ControlSend($hWnd,"",$hCtrl,"{DOWN}") send($hWnd,"{DOWN}") wend ________________________________________________________________________________________ Furthermore, when I directly use the Handle given by WindowInfoTool, like below: $hCtrl = hwnd("0x0000000000010D58") and try to operate with the control: ControlSend($hWnd,"",$hCtrl,"{DOWN}") NOTHING HAPPENS. Can anybody give some advice about that please? Edited May 29, 2016 by waiwei Link to comment Share on other sites More sharing options...
Jules Posted May 27, 2016 Share Posted May 27, 2016 (edited) Could you show us the code you wrote to get the Handle with the ID and the Class attributes ? Edited May 27, 2016 by Jules Link to comment Share on other sites More sharing options...
BrewManNH Posted May 27, 2016 Share Posted May 27, 2016 $hCtrl = ControlGetHandle($hWnd,"","[class:AfxFrameOrView100;instance:1;ID:59648]") ;~ or like this $hCtrl = ControlGetHandle($hWnd,"","[class:AfxFrameOrView100;instance:1]") Try it this way. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
waiwei Posted May 27, 2016 Author Share Posted May 27, 2016 thank you all for reply. I have tried all combinations of id, class, instance to get the handle. unfortunately, it doesn't work. Link to comment Share on other sites More sharing options...
mLipok Posted May 28, 2016 Share Posted May 28, 2016 9 hours ago, BrewManNH said: $hCtrl = ControlGetHandle($hWnd,"","[class:AfxFrameOrView100;instance:1;ID:59648]") ;~ or like this $hCtrl = ControlGetHandle($hWnd,"","[class:AfxFrameOrView100;instance:1]") Try it this way. but the question is if this: $hWnd = WinGetHandle("[title:大智慧]") ;获取任务栏窗口的句柄 Works correctly ? So @waiwei what you see with this test snippet: $hWnd = WinGetHandle("大智慧") If @error Then MsgBox($MB_ICONERROR, 'NOT FOUND', '@error = ' & @error & @CRLF & '@extended = ' & @extended) Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
junkew Posted May 28, 2016 Share Posted May 28, 2016 And try iuiautomation and simple spij. See reference in faq 31 FAQ 31 How to click some elements, FAQ 40 Test automation with AutoIt, Multithreading CLR .NET Powershell CMDLets Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 On 2016/5/28 at 9:38 AM, mLipok said: but the question is if this: $hWnd = WinGetHandle("[title:大智慧]") ;获取任务栏窗口的句柄 Works correctly ? So @waiwei what you see with this test snippet: $hWnd = WinGetHandle("大智慧") If @error Then MsgBox($MB_ICONERROR, 'NOT FOUND', '@error = ' & @error & @CRLF & '@extended = ' & @extended) Thank you very much for your reply. However, WinGetHandle gets no error, while @error after ControlGetHandle returns 1. $hWnd = WinGetHandle("[title:大智慧]") ;获取任务栏窗口的句柄 If @error Then MsgBox(16, 'window NOT FOUND', '@error = ' & @error & @CRLF & '@extended = ' & @extended) $hWnd2 = hwnd("0x00000000001A0AF8") $hCtrl1 = ControlGetHandle($hWnd,"","class:AfxFrameOrView100;instance:1") If @error Then MsgBox(16, 'handle NOT FOUND', '@error = ' & @error & @CRLF) $hCtrl = hwnd("0x0000000000020E2A") Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 On 2016/5/28 at 8:16 PM, junkew said: And try iuiautomation and simple spij. See reference in faq 31 Thank you very much for your wonderful work and your help! I strongly believe that your great framework could solve my problem, since the windows in THAT application is Afx. I am learning IUIA now. However, I encountered some unexpected errors in the examples. Example 1 Iterating thru the different ways of representing the objects in the tree Here is the errorlog. "H:\Biz1\????\Autoit.Files\IUIA Files\temp.au3" (42) : ==> Variable used without being declared.: if $t = 1 then $objUIAutomation.RawViewWalker($pTW) if $t = 1 then ^ ERROR I think $objUIAutomation.RawViewWalker wasn't loaded? Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 I tried to find THAT application window by _UIA_getObjectByFindAll Spoiler #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <constants.au3> #include <WinAPI.au3> #include <debug.au3> #include "CUIAutomation2.au3" #include "UIAWrappers.au3" #AutoIt3Wrapper_UseX64=N ;Should be used for stuff like tagpoint having right struct etc. when running on a 64 bits os Local $oP2=_UIA_getObjectByFindAll($UIA_oDesktop, "Title:=自选股;controltype:=UIA_WindowControlTypeId;class:=Afx:00E50000:b:00010003:00000006:00A90BD3", $treescope_children) $oP2.setfocus() In simplespy, I got the window info as follow: "Title:=自选股;controltype:=UIA_WindowControlTypeId;class:=Afx:00E50000:b:00010003:00000006:00A90BD3" However, I can not set focus on it. >"D:\110应用\AutoIt3\SciTE\..\autoit3.exe" /ErrorStdOut "H:\Biz1\软件开发\Autoit.Files\IUIA Files\temp.au3" "H:\Biz1\????\Autoit.Files\IUIA Files\temp.au3" (14) : ==> Variable must be of type "Object".: $oP2.setfocus() $oP2^ ERROR >Exit code: 1 Time: 1.127 If use the same method on explorer, it is okay. Spoiler #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <constants.au3> #include <WinAPI.au3> #include <debug.au3> #include "CUIAutomation2.au3" #include "UIAWrappers.au3" #AutoIt3Wrapper_UseX64=N ;Should be used for stuff like tagpoint having right struct etc. when running on a 64 bits os Local $oP2=_UIA_getObjectByFindAll($UIA_oDesktop, "Title:=net", $treescope_children) ;net is a folder name in my computer. $oP2.setfocus() Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 On the code following: Spoiler #include "UIAWrappers.au3" AutoItSetOption("MustDeclareVars", 1) Local $oP2=_UIA_getObjectByFindAll($UIA_oDesktop, "Title:=大智慧;controltype:=UIA_WindowControlTypeId;class:=Afx:00E50000:8:00010003:00000000:00150D89", $treescope_children) Local $oP1=_UIA_getObjectByFindAll($oP2, "Title:=工作区;controltype:=UIA_PaneControlTypeId;class:=MDIClient", $treescope_children) Local $oP0=_UIA_getObjectByFindAll($oP1, "Title:=自选股;controltype:=UIA_WindowControlTypeId;class:=Afx:00E50000:b:00010003:00000006:00A90BD3", $treescope_children) _uiA_Action($oP0,"setfocus") ;($oP0有效只是无法controlsend)其实无效,无法将“自选股”setfocus。如果是行情图在前面,自选股不会到最前 Consolewrite(hwnd($op0)) _UIA_Action($oP0,"sendkeys","{DOWN}") controlsend($op2,"",$op2,"{DOWN}") controlsend("大智慧","",$op2,"{DOWN}") controlsend("大智慧","",$op2,"{DOWN}") controlsend("大智慧","",$op0,"{DOWN}") controlsend($oP0,"",$op0,"{DOWN}") I could setfocus on $op0, which in fact set focus to $op2 (the grandparent window, or the highest hierachy window) but, hwnd($op0) is still 0x00000000 and I am unable to controlsend to $op0 (which is essential, since I need to manipulte the application to retrieve data, while run other programs) Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 I have changed another version of that APPLICATION, so the following 2 lines are applicable $hWnd2 = hwnd("0x00000000001A0AF8") ControlSend($hWnd2,"",$hCtrl,"{DOWN}") The only problem now, is that I cannot get the valid Controlhandle of it. (using ControlGetHandle or _UIA_getObjectByFindAll) Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 It is clear that Window info tool and simplyspy got the same handle, but ControlGetHandle or _UIA_getObjectByFindAll can not get it. Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 I use the class info which simply spy gives to me "class:=Afx:00E50000:b:00010003:00000006:00A90BD3" on ControlGetHandle(). Didn't work, either. #AutoIt3Wrapper_UseX64=Y $hWnd = WinGetHandle("[title:大智慧]") ;获取任务栏窗口的句柄 If @error Then MsgBox(16, 'window NOT FOUND', '@error = ' & @error & @CRLF & '@extended = ' & @extended) $hWnd2 = hwnd("0x00000000001A0AF8") $hCtrl = ControlGetHandle($hWnd,"","class:=Afx:00E50000:b:00010003:00000006:00A90BD3") If @error Then MsgBox(16, 'handle NOT FOUND', '@error = ' & @error & @CRLF) $hCtrl1 = hwnd("0x0000000000020E2A") Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 Suddlenly I think that when YOU give me the source code of simply spy, and simply spy can get the ControlHandle, why not retrieve some code in "simplyspy.au3"? unfortunately I can't find "UIA_handle:=" in that file. keep trying. Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 (edited) expandcollapse popupLocal $oP0=_UIA_getObjectByFindAll($oP1, "Title:=自选股;controltype:=UIA_WindowControlTypeId;class:=Afx:00E50000:b:00010003:00000006:00A90BD3", $treescope_children) local $text1= @CRLF & _UIA_getAllPropertyValues($op0) consolewrite($text1) UIA_iaccessiblechildId:= <0> UIA_id:= <65280> UIA_handle:= <200034> UIA_RuntimeId:= <42;200034> I found that this time I got a different UIA_handle than simplespy got. ________________________________result to my code________________________________ UIA_title:= <自选股> UIA_text:= <自选股> UIA_regexptitle:= <自选股> UIA_class:= <Afx:00E50000:b:00010003:00000006:00A90BD3> UIA_regexpclass:= <Afx:00E50000:b:00010003:00000006:00A90BD3> UIA_iaccessiblechildId:= <0> UIA_id:= <65280> UIA_handle:= <200034> UIA_RuntimeId:= <42;200034> UIA_BoundingRectangle:= <69;140;1150;481> UIA_ProcessId:= <29644> UIA_ControlType:= <50032> UIA_LocalizedControlType:= <窗口> UIA_Name:= <自选股> UIA_HasKeyboardFocus:= <False> UIA_IsKeyboardFocusable:= <True> UIA_IsEnabled:= <True> UIA_AutomationId:= <65280> UIA_ClassName:= <Afx:00E50000:b:00010003:00000006:00A90BD3> UIA_Culture:= <0> UIA_IsControlElement:= <True> UIA_IsContentElement:= <True> UIA_IsPassword:= <False> UIA_NativeWindowHandle:= <200034> UIA_IsOffscreen:= <False> UIA_Orientation:= <0> UIA_FrameworkId:= <Win32> UIA_IsRequiredForForm:= <False> UIA_IsDockPatternAvailable:= <False> UIA_IsExpandCollapsePatternAvailable:= <False> UIA_IsGridItemPatternAvailable:= <False> UIA_IsGridPatternAvailable:= <False> UIA_IsInvokePatternAvailable:= <False> UIA_IsMultipleViewPatternAvailable:= <False> UIA_IsRangeValuePatternAvailable:= <False> UIA_IsScrollPatternAvailable:= <False> UIA_IsScrollItemPatternAvailable:= <False> UIA_IsSelectionItemPatternAvailable:= <False> UIA_IsSelectionPatternAvailable:= <False> UIA_IsTablePatternAvailable:= <False> UIA_IsTableItemPatternAvailable:= <False> UIA_IsTextPatternAvailable:= <False> UIA_IsTogglePatternAvailable:= <False> UIA_IsTransformPatternAvailable:= <True> UIA_IsValuePatternAvailable:= <False> UIA_IsWindowPatternAvailable:= <True> UIA_ValueIsReadOnly:= <True> UIA_RangeValueValue:= <0> UIA_RangeValueIsReadOnly:= <True> UIA_RangeValueMinimum:= <0> UIA_RangeValueMaximum:= <0> UIA_RangeValueLargeChange:= <0> UIA_RangeValueSmallChange:= <0> UIA_ScrollHorizontalScrollPercent:= <0> UIA_ScrollHorizontalViewSize:= <100> UIA_ScrollVerticalScrollPercent:= <0> UIA_ScrollVerticalViewSize:= <100> UIA_ScrollHorizontallyScrollable:= <False> UIA_ScrollVerticallyScrollable:= <False> UIA_SelectionCanSelectMultiple:= <False> UIA_SelectionIsSelectionRequired:= <False> UIA_GridRowCount:= <0> UIA_GridColumnCount:= <0> UIA_GridItemRow:= <0> UIA_GridItemColumn:= <0> UIA_GridItemRowSpan:= <1> UIA_GridItemColumnSpan:= <1> UIA_DockDockPosition:= <5> UIA_ExpandCollapseExpandCollapseState:= <3> UIA_MultipleViewCurrentView:= <0> UIA_WindowCanMaximize:= <True> UIA_WindowCanMinimize:= <True> UIA_WindowWindowVisualState:= <0> UIA_WindowWindowInteractionState:= <2> UIA_WindowIsModal:= <False> UIA_WindowIsTopmost:= <False> UIA_SelectionItemIsSelected:= <False> UIA_TableRowOrColumnMajor:= <2> UIA_ToggleToggleState:= <2> UIA_TransformCanMove:= <True> UIA_TransformCanResize:= <True> UIA_TransformCanRotate:= <False> UIA_IsLegacyIAccessiblePatternAvailable:= <True> UIA_LegacyIAccessibleChildId:= <0> UIA_LegacyIAccessibleName:= <自选股> UIA_LegacyIAccessibleRole:= <10> UIA_LegacyIAccessibleState:= <1048576> UIA_IsDataValidForForm:= <False> UIA_ProviderDescription:= <[pid:48052,hwnd:0x30D62 Main:Nested [pid:29644,hwnd:0x30D62 Annotation(parent link):Microsoft: Annotation Proxy (unmanaged:uiautomationcore.dll); Main:Microsoft: MSAA Proxy (unmanaged:uiautomationcore.dll)]; Nonclient:Microsoft: Non-Client Proxy (unmanaged:uiautomationcore.dll); Hwnd(parent link):Microsoft: HWND Proxy (unmanaged:uiautomationcore.dll)]> UIA_IsItemContainerPatternAvailable:= <False> UIA_IsVirtualizedItemPatternAvailable:= <False> UIA_IsSynchronizedInputPatternAvailable:= <False> >Exit code: 0 Time: 1.891 ______________________________________________Result given by simplespy____________________________________ UIA_class:= <AfxFrameOrView100> UIA_regexpclass:= <AfxFrameOrView100> UIA_iaccessiblechildId:= <0> UIA_id:= <59648> UIA_handle:= <265548> UIA_RuntimeId:= <42;265548> UIA_BoundingRectangle:= <72;156;1144;462> UIA_ProcessId:= <29644> UIA_ControlType:= <50033> UIA_LocalizedControlType:= <窗格> UIA_HasKeyboardFocus:= <True> UIA_IsKeyboardFocusable:= <True> UIA_IsEnabled:= <True> UIA_AutomationId:= <59648> UIA_ClassName:= <AfxFrameOrView100> UIA_Culture:= <0> UIA_IsControlElement:= <True> UIA_IsContentElement:= <True> UIA_IsPassword:= <False> UIA_NativeWindowHandle:= <265548> UIA_IsOffscreen:= <False> UIA_Orientation:= <0> UIA_FrameworkId:= <Win32> UIA_IsRequiredForForm:= <False> UIA_IsDockPatternAvailable:= <False> UIA_IsExpandCollapsePatternAvailable:= <False> UIA_IsGridItemPatternAvailable:= <False> UIA_IsGridPatternAvailable:= <False> UIA_IsInvokePatternAvailable:= <False> UIA_IsMultipleViewPatternAvailable:= <False> UIA_IsRangeValuePatternAvailable:= <False> UIA_IsScrollPatternAvailable:= <False> UIA_IsScrollItemPatternAvailable:= <False> UIA_IsSelectionItemPatternAvailable:= <False> UIA_IsSelectionPatternAvailable:= <False> UIA_IsTablePatternAvailable:= <False> UIA_IsTableItemPatternAvailable:= <False> UIA_IsTextPatternAvailable:= <False> UIA_IsTogglePatternAvailable:= <False> UIA_IsTransformPatternAvailable:= <False> UIA_IsValuePatternAvailable:= <False> UIA_IsWindowPatternAvailable:= <False> UIA_ValueIsReadOnly:= <True> UIA_RangeValueValue:= <0> UIA_RangeValueIsReadOnly:= <True> UIA_RangeValueMinimum:= <0> UIA_RangeValueMaximum:= <0> UIA_RangeValueLargeChange:= <0> UIA_RangeValueSmallChange:= <0> UIA_ScrollHorizontalScrollPercent:= <0> UIA_ScrollHorizontalViewSize:= <100> UIA_ScrollVerticalScrollPercent:= <0> UIA_ScrollVerticalViewSize:= <100> UIA_ScrollHorizontallyScrollable:= <False> UIA_ScrollVerticallyScrollable:= <False> UIA_SelectionCanSelectMultiple:= <False> UIA_SelectionIsSelectionRequired:= <False> UIA_GridRowCount:= <0> UIA_GridColumnCount:= <0> UIA_GridItemRow:= <0> UIA_GridItemColumn:= <0> UIA_GridItemRowSpan:= <1> UIA_GridItemColumnSpan:= <1> UIA_DockDockPosition:= <5> UIA_ExpandCollapseExpandCollapseState:= <3> UIA_MultipleViewCurrentView:= <0> UIA_WindowCanMaximize:= <False> UIA_WindowCanMinimize:= <False> UIA_WindowWindowVisualState:= <0> UIA_WindowWindowInteractionState:= <0> UIA_WindowIsModal:= <False> UIA_WindowIsTopmost:= <False> UIA_SelectionItemIsSelected:= <False> UIA_TableRowOrColumnMajor:= <2> UIA_ToggleToggleState:= <2> UIA_TransformCanMove:= <False> UIA_TransformCanResize:= <False> UIA_TransformCanRotate:= <False> UIA_IsLegacyIAccessiblePatternAvailable:= <True> UIA_LegacyIAccessibleChildId:= <0> UIA_LegacyIAccessibleRole:= <10> UIA_LegacyIAccessibleState:= <1048580> UIA_IsDataValidForForm:= <False> UIA_ProviderDescription:= <[pid:47264,hwnd:0x40D4C Main:Nested [pid:29644,hwnd:0x40D4C Annotation(parent link):Microsoft: Annotation Proxy (unmanaged:uiautomationcore.dll); Main:Microsoft: MSAA Proxy (unmanaged:uiautomationcore.dll)]; Hwnd(parent link):Microsoft: HWND Proxy (unmanaged:uiautomationcore.dll)]> UIA_IsItemContainerPatternAvailable:= <False> UIA_IsVirtualizedItemPatternAvailable:= <False> UIA_IsSynchronizedInputPatternAvailable:= <False> Edited May 29, 2016 by Melba23 Added tags Link to comment Share on other sites More sharing options...
waiwei Posted May 29, 2016 Author Share Posted May 29, 2016 Seems solved. I have referred the parent window of what I want. Thank you very much junkew Link to comment Share on other sites More sharing options...
junkew Posted May 29, 2016 Share Posted May 29, 2016 no problem. simplespy source code is in the thread. Probably will not help as it does a getobjectfrompoint logic. As you say both AU3INF and SimpleSpy recognize the window it should be possible eiter with native Autoit and IUIA to iterate to the windows FAQ 31 How to click some elements, FAQ 40 Test automation with AutoIt, Multithreading CLR .NET Powershell CMDLets Link to comment Share on other sites More sharing options...
adityaparakh Posted December 26, 2018 Share Posted December 26, 2018 Hello , Facing a similar issue. Trying to retrieve the text of the MTM value. Please see screenshot. Tried all combinations : expandcollapse popup#include <WindowsConstants.au3> #include <WinAPI.au3> #include <Excel.au3> AutoItSetOption("WinTitleMatchMode", 2) $appName = "Admin Positions" $hWnd = WinGetHandle($appName) WinActivate($appName, "") Sleep(200) ConsoleWrite("Active Handle=" & $hWnd & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:AfxFrameOrView100; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:#32770; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:32770; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[ID:59653; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASSNN:AfxFrameOrView1009; INSTANCE:9]") ConsoleWrite($sID & @CRLF) AutoItSetOption("WinTitleMatchMode", 2) $appName = "NEST Trader" $hWnd = WinGetHandle($appName) WinActivate($appName, "") Sleep(200) ConsoleWrite("Active Handle=" & $hWnd & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:AfxFrameOrView100; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:#32770; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASS:32770; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[ID:59653; INSTANCE:9]") ConsoleWrite($sID & @CRLF) $sID = ControlGetText($hWnd, "", "[CLASSNN:AfxFrameOrView1009; INSTANCE:9]") ConsoleWrite($sID & @CRLF) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now