Jump to content
Satoh

[HELP] Make a license check for a program

Recommended Posts

Hi.

I am writing a program that I want to use it to earn some money, so I have an idea that insert the license checking into it. But I haven't had a code yet.

This is my idea:

-Put my licenses onto my host with their limit days.

-Every day the customers run the program with the license and the program will show costumers how many days left...

Can you give me an example for that program? Thanks a lot if you can help me!

Share this post


Link to post
Share on other sites

Welcome to AutoIt and the forum!
Please check XProtec in the Example Scripts section.

Edited by water

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2020-02-09 - Version 1.4.1.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki, WebDriver - Wiki

 

Share this post


Link to post
Share on other sites

Enter "XProtec" into the search field in the upper right corner and the 8th entry is what you are looking for. The search function is your friend ;)


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2020-02-09 - Version 1.4.1.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki, WebDriver - Wiki

 

Share this post


Link to post
Share on other sites

The first post of the thread has a link to an example.

 


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2020-02-09 - Version 1.4.1.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki, WebDriver - Wiki

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By PeterVerbeek
      This topic give you access to an AutoIt functions library I maintain which is called PAL, Peter's AutoIt Library. The latest version 1.19 contains 194 functions divided into these topics:
      window and screen mouse and GUI GUI controls logics and mathematics string, xml string and file string dialogues and progress bars data lists: lists, stacks, shift registers and key maps (a.ka. dictionaries) miscellaneous: logging/debugging, process and system info A lot of these functions were created in the development of Peace, Peter's Equalizer APO Configuration Extension, which is a user interface for the system-wide audio driver called Equalizer APO.
    • By topgundcp
      Hi, 
      This is my very first post in this forum and am also new with Autoit programming so be easy on me.
      Below is the code that I am trying to get the index of the item selected. No problem getting the text.
      Case $listEdition   ; handle of the list             local $index=0             $item=GUICTRLRead($listEdition)    ; This will return the text in the list             ; ==============   The loop below always fails  ==================             ; Meaning _GUICtrlListView_GetItemSelected($listEdition, $i) always return FALSE. WHY ???????              For $i = 0 To $editionArray[0] - 1   ; The content of the list in an array where editionArray[0] contains total count of items                 If _GUICtrlListView_GetItemSelected($listEdition, $i) Then                     $index = $i                     exitloop                 EndIf              Next              ;===================================================             ConsoleWrite( "Select Edition:     " & $item & "  index: " & $index & @CR) ....... Please look at the comments in the code & the pix attached.
      _GUICtrlListView_GetItemSelected($listEdition, $i) always returns FALSE.
      Another problem is on the list. It also populate  the total count of items from the Array. How can I skip this item from populating to the list ?.
      Please advise and thanks

    • By n0ktar
      is it possible to make a wall chams in rainbow six siege using autoit scripts? tell me please and how . 
    • By Rskm
      Hi, I am using excel as input media for my program. The excel file (i tried with .xls, .xlsx and .xlsm format) has inputs which the autoit script reads during the run and performs few calculations. Some times (not always), after the run, when i try to open the excel file manually, the file doesnt open at all in excel. see the screenshot attached. However, if the execute the autoit script, the scripts still reads the existing data from that excel and performs the calcs. I copied the excel file to another computer and there too, it doesnt open.  So, after this, i cannot edit the excel forever (if i need to change any inputs). It is only this particular file that got affected. other excel files works normal.  What could be the problem here.  please help as this is a new challenge for me during my program development. 

    • By TheAutomator
      Hi everyone!

      I'm using AutoIt for several years now and I really get the hang of it!
      I'm quite the curious OCD perfectionist kind of guy, so I can't help wondering..
      what would be the best way to program stuff for the compiler / interpreter / scripting engine?
      We're talking about the inner workings of the AutoIt's core here, and how to give it as less friction as possible but also take care of the machine running the script.
      For example,
      Imagine a script where we would constantly have to assign a Boolean value to a variable:
      ; A: local $bool = false $bool = true $bool = true $bool = false ; B: local $bool = false check(true) check(true) check(false) func check($b) if $bool = $b then return $bool = $b endfunc In this case, would it be better to just overwrite (A) the variable or first check if we really need to (B)?
      What would be best for the computers memory if it had to do this for a year non stop?
      Another example, imagine you're writing a function with an if statement.
      If you would look under the hood of AutoIt, what would be the best way to give your computer as less work / code nesting stack filling as possible:
      ; A: func decide($b_Input) if $b_Input then ;do something else ;do something else endif endfunc ; B: func decide($b_Input) if $b_Input then ;do something return endif ;do something else endfunc Last one for now:
      ; A: while 1 ; do stuff wend ; B: while true ; do stuff wend Isn't AutoIt taking an extra step in converting 1 to a Boolean in example (A)?
      Or is it the other way around and does the (B) way make AutoIt first convert a keyword (true or false) to a numerical value (0 or 1).
      I think this kinda detail stuff is quite interesting, makes me wonder how AutoIt converts and runs our code.
      What are your opinions on this topic?
      Any coders who know more about the inner workings of AutoIt?
      Any people like me who ask themselves similar questions (with examples)?

      Let me know! 😉
×
×
  • Create New...