Jump to content

YAMM Yet Another Move Mouse application


Recommended Posts

In my work place they blocked the application movemouse. so y decided to do one by myself , to cheat the system.

I have used some peaces of code from another scripts I have, and also I have found in this forum

Hope this helps

$version="0.2"

#include <Misc.au3>
If _Singleton(@ScriptName, 1) = 0 Then ; allow only one instance
    MsgBox(0, "Warning", "An occurence of " & @ScriptName & " is already running")
    Exit
EndIf

#region tray icon
    #NoTrayIcon
    Opt("TrayIconHide", 0)
    Opt("TrayMenuMode", 1)
    TraySetToolTip("Ratoner "&  $version)
    Local $exititem = TrayCreateItem("Exit")
    TraySetState(1) ; Show the tray menu.
#endregion
#region variables
    $BlockScreensaver=1
    $flagMouse=1
    $MouseNotMovedCounter=0
    $posMouseMovedX=0
    $posMouseMovedY=0
    $Counter= 0
#endregion
#region main
    Local $hTimer = TimerInit()
    while 1
        $Counter=$Counter+1
        if $Counter>1000 then
            CheckifMouseMove()
            if $MouseNotMovedCounter>2 then moveMouse()
            $Counter= 0
        endif
        Switch TrayGetMsg()
            Case $exititem
                exit
        EndSwitch
        sleep(50)
    wend
#endregion

#region functions
    func CheckifMouseMove()
;~      ConsoleWrite("+CheckifMouseMove()" & @crlf)
        $posMouseMoved = MouseGetPos()
        if $posMouseMovedX<>$posMouseMoved[0]or $posMouseMovedY <> $posMouseMoved[1] then
            $posMouseMovedX=$posMouseMoved[0]
            $posMouseMovedY=$posMouseMoved[1]
            $MouseNotMovedCounter=0
;~          ConsoleWrite('>$MouseNotMovedCounter = ' & $MouseNotMovedCounter & @crlf )
        Else
            ;$MouseMoved=0
            $MouseNotMovedCounter=$MouseNotMovedCounter+1
;~          ConsoleWrite('--$MouseNotMovedCounter = ' & $MouseNotMovedCounter & @crlf )
        endif
    EndFunc
    func moveMouse()
;~      ConsoleWrite("+moveMouse" & @crlf)
        Local $posMouse = MouseGetPos()
        $flagMouse=$flagMouse*-1
        Local $new_y = $posMouse[1] + $flagMouse ; + (10*$flagMouse)
        MouseMove($posMouse[0],$new_y)
        $MouseNotMovedCounter=0
;~                  ConsoleWrite("+mouseMove $MouseNotMovedCounter" & $MouseNotMovedCounter & @crlf)
    endfunc
#endregion

 

Link to post
Share on other sites

I assume you do this to keep your computer not getting locked

another trick vbscript is to numlock on/off not converted to AutoIT code (I assume if mousemove gets blocked by policy its just a matter of time they block other tools) so far never seen getting wscript locked out by policy

' Function to prevent locking the screen
Function BlinkNumlock()
    Dim WxhShell

    Set WxhShell = CreateObject("WScript.Shell")
     WxhShell.SendKeys "{NUMLOCK}"
     WxhShell.SendKeys "{NUMLOCK}"
     Set WxhShell = Nothing
End Function

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By endtro
      I have a weird problem with a ToolTip function.
      It seems that I can't reliably remove a tooltip from the screen if I originally created it by setting a tooltip text via variable, not a straight up string.
       
      Here's a simple script that I used for testing:
       
      After I remade the script into this, it started working just fine (stopped working after I fixed the array comparison):
       
      Basic idea of the script:
      You press F1 and a tooltip with some useful info shows up by the mouse cursor. It follows the cursor around until you press F1 again, then it copies the info to the clipboard and hides the tooltip.
       
      It almost seems like if I created a tooltip using a variable to set the text, then ToolTip("") most of the times just repeats the previous use of ToolTip function. If you try to add Sleep(1000) before ToolTip("") in the first draft of the script, you'll see what i mean (if it works the same for everyone, that is).
       
      Is this a bug or am I doing something wrong?
    • By Dan_555
      Hi, here are few functions for the ListBox.
      I have searched the forum, but most of the functions are for listview, so i took one example code from melba23 (clear selection) and
      wrote few more functions. (Because my current project needs them).
       
      These functions work only on a Multi-selection ListBox . 
      Edit: Only 1 function does not work with single selection box.
      The functions do: Clear Selection, Delete Selected items, Invert Selection, Move selected items up and down.
       The example code has 2 Listboxes. The selected items on the left ListBox can be moved up and down. The right Listbox has buttons for the other functions.
      #include <GUIConstantsEx.au3> #include <GuiListBox.au3> #include <WindowsConstants.au3> #include <Array.au3> Local $singlesel = 0, $iMsgBoxAnswer = 0 ;MsgBox features: Title=Yes, Text=Yes, Buttons=Yes and No, Icon=Question, Modality=Task Modal $iMsgBoxAnswer = MsgBox(8228, "Choose Listbox selecton type", "Yes for single, No for multi selection box") If $iMsgBoxAnswer = 6 Then $singlesel = 1 ;Yes Local $BL_1,$BL_2,$BR_1,$BR_2,$BR_3,$BR_4,$BR_5,$BR_6 Global $hForm1 = GUICreate("Listbox test", 349, 287) $LB_1 = GUICtrlCreateList("", 6, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) If $singlesel = 1 Then $LB_2 = GUICtrlCreateList("", 179, 40, 157, 244, BitOR($LBS_NOTIFY, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) Else $LB_2 = GUICtrlCreateList("", 179, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) $BR_3 = GUICtrlCreateButton("Reverse Sel", 272, 22, 68, 17) EndIf $BL_1 = GUICtrlCreateButton("Up", 20, 3, 35, 18) $BL_2 = GUICtrlCreateButton("Down", 60, 3, 35, 18) $BR_1 = GUICtrlCreateButton("Up", 200, 3, 35, 18) $BR_2 = GUICtrlCreateButton("Down", 240, 3, 35, 18) $BR_4 = GUICtrlCreateButton("Clear Sel", 217, 22, 52, 17) $BR_5 = GUICtrlCreateButton("Delete", 175, 22, 40, 17) $BR_6 = GUICtrlCreateButton("Populate", 290, 3, 50, 18) GUISetState(@SW_SHOW) For $x = 0 To 50 If $x <= 10 Then GUICtrlSetData($LB_1, $x & " test", 0) GUICtrlSetData($LB_2, $x & " Test", 0) Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $BL_1 $a = Listbox_ItemMoveUD($LB_1, -1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BL_2 $a = Listbox_ItemMoveUD($LB_1, 1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BR_1 Listbox_ItemMoveUD($LB_2, -1) Case $BR_2 Listbox_ItemMoveUD($LB_2, 1) Case $BR_3 Listbox_ReverseSelection($LB_2) Case $BR_4 Listbox_ClearSelection($LB_2) Case $BR_5 Listbox_DeleteSelectedItems($LB_2) Case $BR_6 ;Populate GUICtrlSetData($LB_2, "") ; Clears the listbox For $x = 0 To 50 GUICtrlSetData($LB_2, $x & " Test", 0) Next EndSwitch WEnd ;note $hLB_ID - is the Listbox id Func Listbox_DeleteSelectedItems($hLB_ID) Local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Get selected items Local $i, $slb = 0, $y, $x If $aSel[0] = 0 Then ;If the array is empty, there is no selection, or it is a single selection listbox For $x = 0 To _GUICtrlListBox_GetCount($hLB_ID) - 1 $y = _GUICtrlListBox_GetSel($hLB_ID, $x) If $y = True Then $slb = 1 _GUICtrlListBox_DeleteString($hLB_ID, $x) ;Perform a delete on single sel. LB ExitLoop EndIf Next EndIf If $slb = 0 Then _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = $aSel[0] To 1 Step -1 ;Loop backwards and delete the selected items _GUICtrlListBox_DeleteString($hLB_ID, $aSel[$i]) Next _GUICtrlListBox_EndUpdate($hLB_ID) EndIf EndFunc ;==>Listbox_DeleteSelectedItems Func Listbox_ClearSelection($hLB_ID) ;Removes the selection from multi and single selection ListBox Local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Code from Melba23 - Autoit Forum Local $slb, $x, $y If $aSel[0] = 0 Then _GUICtrlListBox_SetCurSel($hLB_ID, -1) $slb = 1 EndIf If $slb = 0 Then _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = 1 To $aSel[0] _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i], False) Next _GUICtrlListBox_EndUpdate($hLB_ID) EndIf EndFunc ;==>Listbox_ClearSelection Func Listbox_ReverseSelection($hLB_ID) ;Logically, this function works only on multi-selection listboxes Local $i Local $aCou = _GUICtrlListBox_GetCount($hLB_ID) Local $cSel = _GUICtrlListBox_GetCaretIndex($hLB_ID) ;Save the caret _GUICtrlListBox_BeginUpdate($hLB_ID) For $i = 0 To $aCou _GUICtrlListBox_SetSel($hLB_ID, $i, Not (_GUICtrlListBox_GetSel($hLB_ID, $i))) Next _GUICtrlListBox_SetCaretIndex($hLB_ID, $cSel) ;Restore the caret _GUICtrlListBox_EndUpdate($hLB_ID) EndFunc ;==>Listbox_ReverseSelection Func Listbox_ItemMoveUD($hLB_ID, $iDir = -1) ;Listbox_ItemMoveUD - Up/Down Move Multi/Single item in a ListBox ;$iDir: -1 up, 1 down ;Return values -1 nothing to do, 0 nothing moved, >0 performed moves Local $iCur, $iNxt, $aCou, $aSel, $i, $m = 0, $y, $slb = 0 ;Current, next, Count, Selection, loop , movecount $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Put selected items in an array $aCou = _GUICtrlListBox_GetCount($hLB_ID) ;Get total item count of the listbox If $aSel[0] = 0 Then $y = _GUICtrlListBox_GetCurSel($hLB_ID) If $y > -1 Then _ArrayAdd($aSel, $y) $aSel[0] = 1 $slb = 1 EndIf EndIf ;WinSetTitle($hGUI, "", $aSel[0]) ;Debugging info Select Case $iDir = -1 ;Move Up For $i = 1 To $aSel[0] If $aSel[$i] > 0 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] - 1) ;Save the selection index - 1 text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] - 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) ;Replace the index-1 text with the index text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) ;Replace the selection with the saved var $m = $m + 1 EndIf Next For $i = 1 To $aSel[0] ;Restore the selections after moving If $aSel[$i] > 0 Then If $slb = 0 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] - 1, 1) Else _GUICtrlListBox_SetCurSel($hLB_ID, $aSel[$i] - 1) EndIf EndIf Next Return $m Case $iDir = 1 ;Move Down If $aSel[0] > 0 Then For $i = $aSel[0] To 1 Step -1 If $aSel[$i] < $aCou - 1 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] + 1) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] + 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) $m = $m + 1 EndIf Next EndIf For $i = $aSel[0] To 1 Step -1 ;Restore the selections after moving If $aSel[$i] < $aCou - 1 Then If $slb = 0 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] + 1, 1) Else _GUICtrlListBox_SetCurSel($hLB_ID, $aSel[$i] + 1) EndIf EndIf Next Return $m EndSelect Return -1 EndFunc ;==>Listbox_ItemMoveUD  
    • By MrCreatoR
      This UDF allows to set an events handler for Mouse device.
       
      The beginning...
      I searched for a way to disable the Mouse Primary click, and be able to call some function when the click event is received...
      Big thanks to amel27 for this one, i only organized the whole stuff to UDF style.
       
      Example:
      #include <GUIConstantsEx.au3> #include "MouseOnEvent.au3" HotKeySet("{ESC}", "_Quit") _Example_Intro() _Example_Limit_Window() Func _Example_Intro() MsgBox(64, "Attention!", "Let's set event function for mouse wheel *scrolling* up and down", 5) ;Set event function for mouse wheel *scrolling* up/down and primary button *down* action (call our function when the events recieved) _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event") Sleep(3000) ;UnSet the events _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT) _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT) _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ToolTip("") MsgBox(64, "Attention!", "Now let's disable Secondary mouse button up action, and call our event function.", 5) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", 0, 1) Sleep(5000) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) ToolTip("") EndFunc Func _Example_Limit_Window() Local $hGUI = GUICreate("MouseOnEvent UDF Example - Restrict events on specific window") GUICtrlCreateLabel("Try to click on that specific GUI window", 40, 40, 300, 30) GUICtrlSetFont(-1, 12, 800) GUICtrlCreateLabel("Press <ESC> to exit", 10, 10) GUISetState() _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event", $hGUI) ;A little(?) bugie when you mix different events :( ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $GUI_EVENT_PRIMARYDOWN MsgBox(0, "", "Should not be shown ;)") EndSwitch WEnd _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) EndFunc Func _MouseWheel_Events($iEvent) Switch $iEvent Case $MOUSE_WHEELSCROLLDOWN_EVENT ToolTip("Wheel Mouse Button (scrolling) DOWN Blocked") Case $MOUSE_WHEELSCROLLUP_EVENT ToolTip("Wheel Mouse Button (scrolling) UP Blocked") EndSwitch Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MousePrimaryDown_Event() ToolTip("Primary Mouse Button Down Blocked") Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MouseSecondaryUp_Event() ToolTip("Secondary Mouse Button Up Blocked") EndFunc Func _Quit() Exit EndFunc  
      Available Events Constants:
       
      ------------------------------------------
      CHANGELOG:
      Download:
      Attached:     MouseOnEvent_2.4.zip
      Old version:
      MouseOnEvent.zip - v2.3
      MouseOnEvent_2.1.zip
      MouseOnEvent_2.0.zip
      MouseOnEvent_UDF_1.9.zip
      MouseSetOnEvent_UDF_1.8.zip
      MouseSetOnEvent_UDF_1.7.zip
      MouseSetOnEvent_UDF_1.6.zip
      MouseSetOnEvent_UDF_1.5.zip
      MouseSetOnEvent_UDF_1.4.zip
      MouseSetOnEvent_UDF_1.3.zip
      Previous downloads: 146 + 200 + 804
      MouseOnEvent.zip
      MouseOnEvent.zip
    • By CarlD
      Update: Download the latest version here.
      As my first stab at GUI scripting, I'm trying to write a simple graphical interface for Grep for Windows. I have a basic GUI, but I'm stuck on one point and nothing I've tried so far works. The sticking point is that while the Tab key works to move focus from one input control to the next, clicking the mouse on any but the first input does nothing. This seems like a basic feature of GUI functionality that should work out of the box (like Tab), but clearly I'm missing something. I tried (among many other things) Melba23's technique in the post below, but this doesn't do what I'm after -- getting the left click to set the insertion point for user input. Would greatly appreciate a pointer or two. 😉
      Here's my code so far:
      ; Grep for Windows -- GUI [CLD] #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> Opt("WinTitleMatchMode", -2) #cs FileInstall("X:\nix\search1.ico", @TempDir & "\search1.ico") FileInstall("X:\nix\grep.exe", @TempDir & "\grep.exe") FileInstall("X:\nix\sed.exe", @TempDir & "\sed.exe") FileInstall("X:\nix\libiconv2.dll", @TempDir & "\libiconv2.dll") FileInstall("X:\nix\libintl3.dll", @TempDir & "\libintl3.dll") FileInstall("X:\nix\pcre3.dll", @TempDir & "\pcre3.dll") FileInstall("X:\nix\regex2.dll", @TempDir & "\regex2.dll") #ce ; $sDefFs = @ScriptDir & "\.txt" $sOut = "" $iX = 20 $iY = 20 $hgGGrep = GUICreate("Grep for Windows: Simple TeXT search", 600, 600) GUISetState(@SW_SHOW, $hgGGrep) ; Obtain value of control: GUICtrlRead() ; left, top, width, height ; $iX, $iY, $iX + n, $iY + m ; $hgIco = GUICtrlCreateIcon(@ScriptDir & "\search1.ico", $iX, $iY, 10) $hgGL0 = GUICtrlCreateLabel("Enter a string or regular expression" & @CRLF & "(space between words means ""OR"")", $iX + 50, $iY, 250, 30) $hgSch = GUICtrlCreateInput("", $iX + 50, $iY + 40, 325, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgXyZ = GUICtrlCreateCheckbox("cAsE-sEnSiTiVe", $iX + 50, $iY + 65, -1, -1) $hgExe = GUICtrlCreateButton("Search", 400, $iY + 40, -1, -1) $hgFL1 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 100, 250, 20) $hgFs1 = GUICtrlCreateInput("d:\path\*.txt", $iX + 110, $iY + 100, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL2 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 120, 250, 20) $hgFs2 = GUICtrlCreateInput("", $iX + 110, $iY + 120, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL3 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 140, 250, 20) $hgFs3 = GUICtrlCreateInput("", $iX + 110, $iY + 140, 250, 20, $GUI_SS_DEFAULT_INPUT,-1) $hgOut = GUICtrlCreateEdit($sOut, 25, 190, 550, 400, $ES_LEFT, -1) GUICtrlSetState($hgSch, $GUI_FOCUS) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd ; #cs _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgSch)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs1)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs2)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs3)) #ce Thanks in advance.
    • By WoodGrain
      Hi guys,
       
      I've written a script that will move my mouse to a location on the screen whenever my remote access software becomes active, the problem I have is that as soon as the remote access software becomes active it appears to capture the mouse and keyboard so nothing happens when I use MouseMove().
       
      Is there any way around this?
       
      Thanks!
×
×
  • Create New...