Jump to content

Recommended Posts

I've a problem with receiving data on my PC by TCP and UDP. I can send data to another computer, but can't receive it.

I'm not shure where is the problem (on PC or on "another comupers")

This is client code:

;TCP client
TCPStartup()
$socket = TCPConnect("192.168.0.18", 7777) ;try to connect to server and save number of socket
If $socket = -1 Then ;if $socket = -1 then error
   MsgBox(16, "Error:", "Can't connect to server")
EndIf
$sendedBytes = TCPSend($socket, "nothing here :)") ;send message to connected socket
If $sendedBytes = 0 Then ;if receiving data TCPSend(...) = 0 then error
   MsgBox(16, "Error", "Can't send message")
EndIf
TCPCloseSocket($socket)
TCPShutdown()

and server code:

;TCP server
TCPStartup()
$mainsocket = TCPListen("192.168.0.18", 7777) ;making main receiving socket
While 1 ;receiving loop
   $acceptedSocket = TCPAccept($mainsocket) ;possible connection to accept
   If $acceptedSocket <> -1 Then
      $receivedData = TCPRecv($acceptedSocket, 1024) ;if main socket is connected then receive message
      MsgBox(64, "Received message!", "Message: " & $receivedData)
      TCPCloseSocket($acceptedSocket) ;close open connecion
   EndIf
WEnd
TCPShutdown()

 

When server is on PC I can't receive any messages from any other computers.
When client is on PC I can receive messages on any another computer.

I tried to turn off antiviruses and windows firewall but it did't change anything

 

EDIT:

Error code from client from TCPConnect is 10060 (connection time out) and from TCPSend: 10038

I've found something about 10060 error code, Microsoft says "Connection timed out. A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host has failed to respond."

So it means that the problem is with time of response but it makes no sense couse "another computer" is Virtual Machine with bridge internet connection from PC (pings beetwen PC  and VM are lower than 1ms.

About 10038 error code microsoft says that this is problem with socket and it actually makes sense.

 
Edited by Turtlix21
Link to post
Share on other sites

No, they haven't same IP (PC's IP: 0.18 and VM's IP: 0.21), but in both of this codes I have to set up servers IP (in server I'm setting on what ip server will be working, and on client to what server I'm trying to connect).

Edited by Turtlix21
Link to post
Share on other sites

yep, what I meant was: you said when server is on VM, everything works (so client\server scripts have the right 0.18 IP), but when server is on PC it doesn't work, in this last case, have you kept attention to change accordingly the inserted client\server IPs to 0.21?

Also, it seems stupid but... Server must be started before client execution :P

Edited by j0kky
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Zaoka
      HI,
      for couple of years I'm using  Jos script for sending reports, email with excel attachment. But from last week i'm getting this error when sending excel or word attachment
      message has lines too long for transport jpeg, pdf works with no problems, any sugestion ?
    • By diepfeile
      I'm using the following:
      Autoit 3.3.14.5
      newly installed Beta 3.3.15.5
      SQlite version 3380000 aka 3.38.0
      I put sqlite3.dll and sqlite3_x64.dll in C:\Windows\System32 since many scripts depend on them.


      I extended the output of _SQLite_Startup()
      with:
      ConsoleWrite("@AutoItX64 " & @AutoItX64 & @CRLF) ConsoleWrite("$sDll_Filename " & $sDll_Filename & @CRLF) ConsoleWrite("_SQLite_LibVersion=" & _SQLite_LibVersion() & @CRLF)

      Also using the script from https://www.autoitscript.com/autoit3/docs/libfunctions/_SQLite_Startup.htm for testing.

       
      >Running:(3.3.14.5):C:\Program Files (x86)\AutoIt3\autoit3.exe "R:\Download\aasdf.au3" @AutoItX64 0 $sDll_Filename sqlite3.dll _SQLite_LibVersion=0 >Running:(3.3.14.5):C:\Program Files (x86)\AutoIt3\autoit3_x64.exe "R:\Download\aasdf.au3" @AutoItX64 1 $sDll_Filename sqlite3_x64.dll _SQLite_LibVersion=3.38.0 >Running:(3.3.15.5):C:\Program Files (x86)\AutoIt3\Beta\autoit3.exe "R:\Download\aasdf.au3" @AutoItX64 0 $sDll_Filename sqlite3.dll _SQLite_LibVersion=0 >Running:(3.3.15.5):C:\Program Files (x86)\AutoIt3\Beta\autoit3_x64.exe "R:\Download\aasdf.au3" @AutoItX64 1 $sDll_Filename sqlite3_x64.dll _SQLite_LibVersion=3.38.0


      Why doesn't it work in 32bit, despite me having the 32bit sqlite.dll? Autoit urges running scripts in 32bit mode and Scite starts scripts just in 32bit mode without the flag?
      With #AutoIt3Wrapper_UseX64=Y it just works, both normal Autoit and beta!
      sqlite3.dll sqlite3_x64.dll
    • By Iraj
      Hello Team, Greetings!
      Is there any way to run any 3rd party application silently in background without the GUI getting in the front ?
      I was implementing angry-ip scanner with autoit & wanted the angry-ip application to run in background quietly as I am copying its output to other file on completion. is there any way to achieve my query?
      Below is code I tried: 
      $range = "192.168.0.1 192.168.0.255" ShellExecuteWait("C:\Windows\DDM\ipscan.exe","-f:range "&$iprange&" -q -o C:\temp\ScanResults.csv","","open",@SW_HIDE) Thanks!
    • By PeterVerbeek
      This topic give you access to an AutoIt functions library I maintain which is called PAL, Peter's AutoIt Library. The latest version 1.26 contains 214 functions divided into these topics:
      window, desktop and monitor GUI, mouse and color GUI controls including graphical buttons (jpg, png) logics and mathematics include constants string, xml string and file string dialogues and progress bars data lists: lists, stacks, shift registers and key maps (a.ka. dictionaries) miscellaneous: logging/debugging, process and system info Change log and files section  on the PAL website (SourceForge).
      A lot of these functions were created in the development of Peace, Peter's Equalizer APO Configuration Extension, which is a user interface for the system-wide audio driver called Equalizer APO.
    • By Hermes
      Hi, I am struggling in setting the value of a textarea based on the value of clipboard (that contains a long web page source codes). If I use _WD_SetElementValue, it freezes after some time, or appears to be pressing tab and goes out of focus. I can also use send keys but i need the script to run in the background.
      Here is the full script:
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "http://demo.borland.com/testsite/stadyn_largepagewithimages.html") _WD_LoadWait($sSession) Global $sSource = _WD_GetSource($sSession) Local $Paste = ClipPut($sSource) Local $sData = ClipGet() Local $aArray = 0, _ $iOffset = 1 While 1 $aArray = StringRegExp($sData, '(?s)<p>.*</p>', $STR_REGEXPARRAYMATCH, $iOffset) If @error Then ExitLoop $iOffset = @extended For $i = 0 To UBound($aArray) - 1 Local $Paste = ClipPut($aArray[$i]) Local $sRegExData = ClipGet() ;MsgBox(0, "", "$sRegExData = " & $sRegExData) Next WEnd _WD_Navigate($sSession, "https://www.w3schools.com/tags/tryit.asp?filename=tryhtml5_textarea_placeholder") _WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, "iframe#iframeResult") Local $sElement1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "iframe#iframeResult") _WD_FrameEnter($sSession, $sElement1) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//html/body/textarea") $textarea = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//html/body/textarea") _WD_ElementAction($sSession, $textarea, 'click') ;WD SetElementValue(SsSession, Stextarea, $sRegExData) <-- I can do this but the focus goes out, or the browser freezes _WD_FrameLeave($sSession) sleep(2000) Send("^v") _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome Can someone help me please, or re-direct me to the right path? TIA!
×
×
  • Create New...