Jump to content

Multi "Screen" GUI Management


Aphotic
 Share

Recommended Posts

Just wanted to share my functions for managing a GUI with lots of controls and many screens.

I personally feel that it is very efficient and keeps line count to a minimum.

And if it's not, I'll learn a better solution!

Note: There are some conditional veriables such as $changes and $cont that are modified by the main loop in this particular script; they are meant as an example, please don't try too hard to understand why they're used.

*Usage*

This allows you to re-state a handful of buttons in one line when doing slight GUI changes:

ToggleCTRL($GUI_DISABLE, $dALO, $dAAF, $dRLA) (A few buttons on a certain screen)

ToggleCTRL($GUI_DISABLE, $dSAV, $dCAN) (Save/Cancel buttons)

AND

A single line solution to switching a GUI "screen":

GuiMod("MAIN", $GUI_HIDE)

GuiMod("DETAILS", $GUI_SHOW)

GuiMod("PLANS", $GUI_HIDE)

Another way I've used this to my advantage is as follows:

Say a GUI has 3 or 4 main screens, and 3 or 4 "form" screens.

When switching to a form screen, save the main screen that it was on to a variable; then once the user is done with the form, either submitting or cancelling, you can call the variable to revert back to the main screen it was on.

Func _GuiMod($i, $tog, $act = True)
   Switch $i
   Case "MAIN"
      If $tog = $GUI_SHOW And $changes Then
         $changes = False
         ControlClick($GUI, "", $LOGfg)
      Else
      EndIf
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 535, 445)
      _ToggleCTRL($tog, $TAB, $LOGfl, $LOGfc, $LOGfi, $LOGfg, $LOGta, $LOGvd)
      _ToggleCTRL($tog, $LOGtp, $LOGse)
   Case "DETAILS"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 535, 475)
      Local $cont = True
      If $tog = $GUI_SHOW And $act Then
         If Not UpdateDetails() Then
            $cont = False
            _GuiMod("MAIN", $GUI_SHOW)
         EndIf
      EndIf
      If $cont Then
         _ToggleCTRL($tog, $dUID, $dICU, $dACC, $dCOF, $dNAM, $dCO2, $dIPW, $dEMA, $dEDI, $dLOG, $dMOD)
         _ToggleCTRL($tog, $dUPD, $dINP, $dAPL, $dALO, $dAAF, $dPLL, $dLOL, $dAFL, $dSAV, $dCAN, $dRPL)
         _ToggleCTRL($tog, $dRLA, $dACT, $dAC2, $dRET, $dDEL, $dADD, $dMQC)
      EndIf
   Case "ADD-INPUT"
      _ToggleCTRL($tog, $nCOMi, $nCO2i, $nNAMi, $nNAMb, $nEMAi, $nPREc, $nACCc, $nICUi, $nADDi, $nNOTi)
      _ToggleCTRL($tog, $nAPLb, $nALOb, $nAAFb, $nPLAl, $nLOCl, $nAFFl, $nRPLb, $nRLAb, $nADDb, $nCLEb)
   Case "PLANS"
      If $tog <> $GUI_SHOW Or Not $changing Then
         If $act Then _ToggleCTRL($tog, $dMOD, $dLOG, $dUPD, $dDEL)
         _ToggleCTRL($tog, $dINP, $dAPL, $dALO, $dAAF, $dPLL, $dLOL, $dAFL, $dSAV, $dCAN, $dRPL, $dRLA)
      EndIf
   Case "CHANGE"
      _ToggleCTRL($tog, $dITL, $dITC, $dAML, $dAMC, $dSCB, $dCCB, $dEAB)
      If $tog = $GUI_SHOW Then
         GUICtrlSetState($dRET, $GUI_DISABLE)
      Else
         GUICtrlSetState($dRET, $GUI_ENABLE)
      EndIf
   Case "NEW"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 465, 475)
      _ToggleCTRL($tog, $TAB, $nCOMl, $nCOMi, $nCO2l, $nCO2i, $nNAMl, $nNAMi, $nEMAl, $nEMAi, $nPREl, $nPREc)
      _ToggleCTRL($tog, $nACCl, $nACCc, $nPAEb, $nICUl, $nICUi, $nADDi, $nAPLb, $nALOb, $nAAFb, $nPLAl, $nLOCl)
      _ToggleCTRL($tog, $nAFFl, $nRPLb, $nNOTl, $nNOTi, $nADDb, $nCLEb, $nLAST)
   Case "ACCESS"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 465, 330)
      _ToggleCTRL($tog, $ACCd1, $ACCd2, $TYPla, $TYPli, $TYPad, $TYPde, $TYPmu, $TYPmd, $ACCla, $ACCli)
      _ToggleCTRL($tog, $ACCde, $ACCmu, $ACCmd, $ACCdl, $ACCdi, $ACCal, $ACCai, $ACCaa, $taRET)
   Case "TPi"
      _ToggleCTRL($tog, $tpOPEb, $tpCREr, $tpLINr, $tpCO2i, $tpEMAi, $tpEMAl, $tpCREb, $tpCOPb, $tpCOPi, $tpCTOi, $tpCGOb)
      _ToggleCTRL($tog, $tpUFLi, $tpUFLb, $tpICUi, $tpPLAi, $tpLINb, $tpDLIb, $tpUFMi, $tpSCAl, $tpCFAr, $tpCBAr)
   Case "TPC"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpCO2l, $tpCO2i, $tpCOPl, $tpCOPi, $tpCREb, $tpCOPb, $tpSEPl, $tpCTOl, $tpCTOi, $tpCGOb, $tpLAST)
      _ToggleCTRL($tog, $tpIDNl, $tpIDNi, $tpIDNn, $tpSCAl, $tpEMAi, $tpEMAl, $tpCFAr, $tpCBAr)
   Case "TPL"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpUFLl, $tpUFLi, $tpUFLb, $tpICUl, $tpICUi, $tpPLAl, $tpPLAi, $tpLINb, $tpDLIb, $tpUFMl, $tpUFMi, $tpIMAb, $tpIMRb)
   Case "TPH"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpUFLl, $tpUFLi, $tpUFLb, $tpUFMl, $tpUFMi, $tpCOCl, $tpCOCi, $tpCOGb)
   Case "TPD"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpDIDl, $tpDIDi, $tpDIDb)
   EndSwitch
EndFunc

Func _ToggleCTRL($tog, $c0 = 0, $c1 = 0, $c2 = 0, $c3 = 0, $c4 = 0, $c5 = 0, $c6 = 0, $c7 = 0, $c8 = 0, $c9 = 0, $c10 = 0, $c11 = 0, $c12 = 0)
   For $i = 0 To @NumParams
      GUICtrlSetState(Eval("c" & $i), $tog)
   Next
EndFunc

 

Edited by Aphotic
Link to comment
Share on other sites

I see only functions.
Can you post also example to show us how to use it ?

 

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

Small question/suggestion for your _ToggleCTRL function.  Why not just provide an array to the function?  That way you don't limit yourself to x (12) manually defined parameters and you eliminate the extra overhead from the Eval function.

Link to comment
Share on other sites

On ‎11‎/‎11‎/‎2016 at 4:30 PM, mLipok said:

I see only functions.
Can you post also example to show us how to use it ?

 

Edited the first post.

On ‎11‎/‎14‎/‎2016 at 2:54 PM, spudw2k said:

Small question/suggestion for your _ToggleCTRL function.  Why not just provide an array to the function?  That way you don't limit yourself to x (12) manually defined parameters and you eliminate the extra overhead from the Eval function.

Sometimes, I call the ToggleCTRL function with different groups of control variables, maybe even just two to three.

I like your idea, although I wish I could call it with something like:

ToggleCTRL($GUI_DISABLE, [$nALOb, $nAAFb])

I don't like the idea of having to declare a local variable every time before calling it, unless I'm missing something...

Local $tcArr = [$nALOb, $nAAFb]

ToggleCTRL($GUI_DISABLE, $tcArr)

The idea is to reduce the line count in the main script logic; please advise?

 

Thank you to you both!

 

 

Edited by Aphotic
Link to comment
Share on other sites

Well, you're right...you'd have to define the arrays, but not every time (unless it truly needs to be dynamic).  You could declare arrays for each collection of controls at the beginning of your script.  

edit:
Another idea I thought of to simply the array creation....you could use StringSplit to create an array from a character delimited string with your control IDs.  Really cutting out the Eval overhead is what I was suggesting.  

Edited by spudw2k
Link to comment
Share on other sites

21 hours ago, spudw2k said:

Well, you're right...you'd have to define the arrays, but not every time (unless it truly needs to be dynamic).  You could declare arrays for each collection of controls at the beginning of your script.  

edit:
Another idea I thought of to simply the array creation....you could use StringSplit to create an array from a character delimited string with your control IDs.  Really cutting out the Eval overhead is what I was suggesting.  

Yeah, I'd rather not define an array that's going to be used once.

The delimited string idea is perfect, thank you very much; I'll edit the first post with that!

Link to comment
Share on other sites

I'm not sure if I prefer this method. It may reduce the need for Eval and turn it into a one line solution, although I've never had issues with performance when using Eval and the method I'm currently using is a tad easier to read.

Func _GuiMod($i, $tog, $act = True)
   Switch $i
   Case "MAIN"
      If $tog = $GUI_SHOW And $changes Then
         $changes = False
         ControlClick($GUI, "", $LOGfg)
      Else
      EndIf
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 535, 445)
      _ToggleCTRL($tog, $TAB &"|"& $LOGfl &"|"& $LOGfc &"|"& $LOGfi &"|"& $LOGfg &"|"& $LOGta &"|"& $LOGvd &"|"& $LOGtp &"|"& $LOGse)
   Case "DETAILS"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 535, 475)
      Local $cont = True
      If $tog = $GUI_SHOW And $act Then
         If Not UpdateDetails() Then
            $cont = False
            _GuiMod("MAIN", $GUI_SHOW)
         EndIf
      EndIf
      If $cont Then
         _ToggleCTRL($tog, $dUID &"|"& $dICU &"|"& $dACC &"|"& $dCOF &"|"& $dNAM &"|"& $dCO2 &"|"& $dIPW &"|"& $dEMA &"|"& $dEDI &"|"& $dLOG &"|"& $dMOD)
         _ToggleCTRL($tog, $dUPD &"|"& $dINP &"|"& $dAPL &"|"& $dALO &"|"& $dAAF &"|"& $dPLL &"|"& $dLOL &"|"& $dAFL &"|"& $dSAV &"|"& $dCAN &"|"& $dRPL)
         _ToggleCTRL($tog, $dRLA &"|"& $dACT &"|"& $dAC2 &"|"& $dRET &"|"& $dDEL &"|"& $dADD &"|"& $dMQC)
      EndIf
   Case "ADD-INPUT"
      _ToggleCTRL($tog, $nCOMi &"|"& $nCO2i &"|"& $nNAMi &"|"& $nNAMb &"|"& $nEMAi &"|"& $nPREc &"|"& $nACCc &"|"& $nICUi &"|"& $nADDi &"|"& $nNOTi)
      _ToggleCTRL($tog, $nAPLb &"|"& $nALOb &"|"& $nAAFb &"|"& $nPLAl &"|"& $nLOCl &"|"& $nAFFl &"|"& $nRPLb &"|"& $nRLAb &"|"& $nADDb &"|"& $nCLEb)
   Case "PLANS"
      If $tog <> $GUI_SHOW Or Not $changing Then
         If $act Then _ToggleCTRL($tog, $dMOD &"|"& $dLOG &"|"& $dUPD &"|"& $dDEL)
         _ToggleCTRL($tog, $dINP &"|"& $dAPL &"|"& $dALO &"|"& $dAAF &"|"& $dPLL &"|"& $dLOL &"|"& $dAFL &"|"& $dSAV &"|"& $dCAN &"|"& $dRPL &"|"& $dRLA)
      EndIf
   Case "CHANGE"
      _ToggleCTRL($tog, $dITL &"|"& $dITC &"|"& $dAML &"|"& $dAMC &"|"& $dSCB &"|"& $dCCB &"|"& $dEAB)
      If $tog = $GUI_SHOW Then
         GUICtrlSetState($dRET, $GUI_DISABLE)
      Else
         GUICtrlSetState($dRET, $GUI_ENABLE)
      EndIf
   Case "NEW"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 465, 475)
      _ToggleCTRL($tog, $TAB &"|"& $nCOMl &"|"& $nCOMi &"|"& $nCO2l &"|"& $nCO2i &"|"& $nNAMl &"|"& $nNAMi &"|"& $nEMAl &"|"& $nEMAi &"|"& $nPREl &"|"& $nPREc &"|"& $nACCl &"|"& $nACCc &"|"& $nPAEb &"|"& $nICUl &"|"& $nICUi &"|"& $nADDi &"|"& $nAPLb &"|"& $nALOb &"|"& $nAAFb &"|"& $nPLAl &"|"& $nLOCl &"|"& $nAFFl &"|"& $nRPLb &"|"& $nNOTl &"|"& $nNOTi &"|"& $nADDb &"|"& $nCLEb &"|"& $nLAST)
   Case "ACCESS"
      If $tog = $GUI_SHOW Then WinMove($GUI, "", Default, Default, 465, 330)
      _ToggleCTRL($tog, $ACCd1 &"|"& $ACCd2 &"|"& $TYPla &"|"& $TYPli &"|"& $TYPad &"|"& $TYPde &"|"& $TYPmu &"|"& $TYPmd &"|"& $ACCla &"|"& $ACCli &"|"& $ACCde &"|"& $ACCmu &"|"& $ACCmd &"|"& $ACCdl &"|"& $ACCdi &"|"& $ACCal &"|"& $ACCai &"|"& $ACCaa &"|"& $taRET)
   Case "TPi"
      _ToggleCTRL($tog, $tpOPEb &"|"& $tpCREr &"|"& $tpLINr &"|"& $tpCO2i &"|"& $tpEMAi &"|"& $tpEMAl &"|"& $tpCREb &"|"& $tpCOPb &"|"& $tpCOPi &"|"& $tpCTOi &"|"& $tpCGOb &"|"& $tpUFLi &"|"& $tpUFLb &"|"& $tpICUi &"|"& $tpPLAi &"|"& $tpLINb &"|"& $tpDLIb &"|"& $tpUFMi &"|"& $tpSCAl &"|"& $tpCFAr &"|"& $tpCBAr)
   Case "TPC"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpCO2l &"|"& $tpCO2i &"|"& $tpCOPl &"|"& $tpCOPi &"|"& $tpCREb &"|"& $tpCOPb &"|"& $tpSEPl &"|"& $tpCTOl &"|"& $tpCTOi &"|"& $tpCGOb &"|"& $tpLAST &"|"& $tpIDNl &"|"& $tpIDNi &"|"& $tpIDNn &"|"& $tpSCAl &"|"& $tpEMAi &"|"& $tpEMAl &"|"& $tpCFAr &"|"& $tpCBAr)
   Case "TPL"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpUFLl &"|"& $tpUFLi &"|"& $tpUFLb &"|"& $tpICUl &"|"& $tpICUi &"|"& $tpPLAl &"|"& $tpPLAi &"|"& $tpLINb &"|"& $tpDLIb &"|"& $tpUFMl &"|"& $tpUFMi &"|"& $tpIMAb &"|"& $tpIMRb)
   Case "TPH"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPD", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpUFLl &"|"& $tpUFLi &"|"& $tpUFLb &"|"& $tpUFMl &"|"& $tpUFMi &"|"& $tpCOCl &"|"& $tpCOCi &"|"& $tpCOGb)
   Case "TPD"
      If $tog = $GUI_SHOW Then
         _GuiMod("TPC", $GUI_HIDE)
         _GuiMod("TPL", $GUI_HIDE)
         _GuiMod("TPH", $GUI_HIDE)
      EndIf
      _ToggleCTRL($tog, $tpDIDl &"|"& $tpDIDi &"|"& $tpDIDb)
   EndSwitch
EndFunc

Func _ToggleCTRL($tog, $ctrl)
   Local $arr = StringSplit($ctrl, "|")
   For $i = 1 To Ubount($arr)-1
      GUICtrlSetState($arr[$i], $tog)
   Next
EndFunc

 

Link to comment
Share on other sites

  • 1 month later...

Today I realized a good way to further reduce the needed code to process controls like this.

 

Local $mNamLa = GUICtrlCreateLabel("Name:", 8, 9)
Local $mNamIn = GUICtrlCreateInput("", 50, 5, 220, 20)
Local $mTypLa = GUICtrlCreateLabel("Type:", 12, 39)
Local $mTypAD = GUICtrlCreateRadio("Active Directory", 50, 35, 100)
Local $mTypIn = GUICtrlCreateRadio("Input", 160, 35, 50)
Local $mTypSe = GUICtrlCreateRadio("Select", 220, 35, 50)
Local $mADaLa = GUICtrlCreateLabel("Attribute Name:", 10, 71, 79)
Local $mADaIn = GUICtrlCreateInput("", 90, 67, 180)
Local $mSelLa = GUICtrlCreateLabel("Values:", 30, 71, 44)
Local $mSelCo = GUICtrlCreateCombo("", 75, 67, 120, 25, $CBS_DROPDOWNLIST)
Local $mSelAd = GUICtrlCreateButton("", 205, 64, 26, 26, $BS_ICON)
GUICtrlSetImage(-1, @ScriptDir & "\icons\add.ico")
Local $mSelRe = GUICtrlCreateButton("", 240, 64, 26, 26, $BS_ICON)
GUICtrlSetImage(-1, @ScriptDir & "\icons\delete.ico")
Local $mActSa = GUICtrlCreateButton("Save", 30, 105, 100, 25)
Local $mActCa = GUICtrlCreateButton("Cancel", 150, 105, 100, 25)

;Using the function below, you can use the following to toggle gui screens.
_ToggleCTRL($GUI_HIDE, "mNamLa", "mActCa")
;Further, it leaves the option to toggle a list of particular ones that are not in order if you need to
_ToggleCTRL($GUI_HIDE, $mTypLa, $mTypAD, $mTypIn, $mTypSe, $mSelLa, $mSelCo)

Func _ToggleCTRL($tog, $c0 = 0, $c1 = 0, $c2 = 0, $c3 = 0, $c4 = 0, $c5 = 0, $c6 = 0, $c7 = 0, $c8 = 0, $c9 = 0, $c10 = 0, $c11 = 0, $c12 = 0)
   If IsString($c0) Then
      For $i = Eval($c0) To Eval($c1)
         GUICtrlSetState($i, $tog)
      Next
   Else
      For $i = 0 To @NumParams
         GUICtrlSetState(Eval("c" & $i), $tog)
      Next
   EndIf
EndFunc

 

Edited by Aphotic
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...