Jump to content
ronaldo97

How do I make GUI are compatible with the computer screen size

Recommended Posts

Hello :D
How can I make the GUI is  compatible with all screen sizes ?? :(

 

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 623, 445, 192, 124, BitOR($GUI_SS_DEFAULT_GUI,$WS_MAXIMIZE))
GUISetBkColor(0x1E1E1E)
$Label1 = GUICtrlCreateLabel("Welcome Back !!", 424, 64, 161, 29)
GUICtrlSetFont(-1, 16, 400, 0, "Tahoma")
GUICtrlSetColor(-1, 0x800000)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd
How do I make Gui interface compatible with all screen sizes ??

800*600

1024*768

1280*1024

Edited by ronaldo97

Share this post


Link to post
Share on other sites

ronaldo97,

The @DeskTopWidth & @DeskTopHeight macros will give you the screen size - you then need to calculate what size and position you require for the GUI. Create the GUI at full size and use GUICtrlSetResizing on the controls (or use Opt("GUIResizeMode")) so that the controls will resize as well. Then resize and move the GUI like this:

; Set GUI to required position and size
 GUISetState(@SW_HIDE)
 WinMove($hGUI, "", $iMain_X, $iMain_Y, $iMain_W, $iMain_H)
 GUISetState(@SW_SHOW)

Please ask if you have any questions.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
5 hours ago, Melba23 said:

ronaldo97,

The @DeskTopWidth & @DeskTopHeight macros will give you the screen size - you then need to calculate what size and position you require for the GUI. Create the GUI at full size and use GUICtrlSetResizing on the controls (or use Opt("GUIResizeMode")) so that the controls will resize as well. Then resize and move the GUI like this:

; Set GUI to required position and size
 GUISetState(@SW_HIDE)
 WinMove($hGUI, "", $iMain_X, $iMain_Y, $iMain_W, $iMain_H)
 GUISetState(@SW_SHOW)

Please ask if you have any questions.

M23

Thank hou very much !!

 

Please explain to me possible video ??:'(

Edited by ronaldo97

Share this post


Link to post
Share on other sites

ronaldo97,

Quote

Please explain to me possible video?

Why do you need a video? Just run this:

#include <GUIConstantsEx.au3>

; Get controls to resize with the GUI
Opt("GUIResizeMode", $GUI_DOCKAUTO)

; Get screen size
$iScreenWidth = @DesktopWidth
$iScreenHeight = @DesktopHeight

; Calculate required size and position
$iGUIX = 100
$iGUIY = 100
$iGUIWidth = $iScreenWidth - ($iGUIX * 2)
$iGUIHeight = $iScreenHeight - ($iGUIY * 2)

; Create GUI for assumed "normal" case
$hGUI = GUICreate("Test", 500, 500)

$cLabel = GUICtrlCreateLabel("This is the GUI at the size you created", 10, 10, 250, 50)
GUICtrlSetBkColor($clabel, 0xFFCCCC)

$cButton = GUICtrlCreateButton("Press me to resize the GUI", 10, 400, 150, 50)

GUISetState()

While 1

    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cButton
            GUICtrlSetData($cLabel, "See how everything in the GUI" & @CRLF & "is resized along with the GUI?")
            ; Resize and relocate GUI as required
            WinMove($hGUI, "", $iGUIX, $iGUIY, $iGUIWidth, $iGUIHeight)
    EndSwitch

WEnd

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By cptHark
      Hello I want to conect to a Network with DriveMapAdd.
      This worked just fine but when you restart the Computer the Mapped drive is gone.
      So i used the persistent mapping flag and that seemed to work, too.
      However when the Computer is restarted I cant connect to the Network because it doesnt remember the Username and password I ave it the first time.
      How do I fix this?
      My Code:Func
      setdrivem()
          DriveMapAdd("M:", GUICtrlRead($driveM),1, GUICtrlRead($netzuser),GUICtrlRead($netzpassword) )
      EndFunc
      $netzuser and $netzpassword are set earlier in the gui and it works right after executing the script but i want it to stay connected
    • By Pickpocketz88
      First I would just like to say HELLO! to anyone reading. It has been a while since I've posted to the Forums but I'm always crawling around.
      Now to the matter at hand. I have been looking high and low for a simplistic answer my burned out brain can find but to no avail. I've only recently upped my AutoIt skill and only by a little bit such as ordering my script neatly with my own UDFs and using Global/Dim more often to make my GUI creation understandable and easy to keep things orderly. My current problem however is figuring out how to make my newest endeavor work which is my own "Debugger". I've made a GUI with an Edit Control to display what my Variables are holding and other information from a concurrently running Script. I have access to all of the scripts I'm attempting to connect but I'm dumbfounded on how I would separately read variable information from one running script into another. I'll provide my "Debugger" script that I want to read variables into and a "Meta Script" I'd want to pass info from.
      #Region Include Files #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <ColorConstantS.au3> #EndRegion #Region AutoIt Options ;Opt("TrayAutoPause", 0) ;Opt("TrayMenuMode", 3) #EndRegion #Region Hotkeys HotKeySet("{ESC}", "ExitProgram") HotKeySet("{PGDN}", "PauseProgram") HotKeySet("!1", "Snippet_1") HotKeySet("!2", "Snippet_2") HotKeySet("!3", "Snippet_3") HotKeySet("!4", "Snippet_4") HotKeySet("!5", "Snippet_5") HotKeySet("!6", "Snippet_6") HotKeySet("!7", "Snippet_7") HotKeySet("!8", "Snippet_8") HotKeySet("!9", "Snippet_9") #EndRegion #Region Global Variables #Region Globals Global $gMain, $ctrlEdit ;, $gParent #EndRegion #Region $gMain Params Dim $gMainW = @DesktopWidth / 2 Dim $gMainH = @DesktopHeight / 2 Dim $gMainX = (@DesktopWidth / 2) - ($gMainW / 2) Dim $gMainY = (@DesktopHeight / 2) - ($gMainH / 2) Dim $gMainStyle = $WS_POPUP Dim $gMainStyleEx = -1 ;Dim $gMainParent = $gParent #EndRegion #Region $ctrlEdit Params Dim $ctrlEditW = Round($gMainW * 0.98) Dim $ctrlEditH = Round($gMainH * 0.98) Dim $ctrlEditX = ($gMainW - $ctrlEditW) / 2 Dim $ctrlEditY = ($gMainH - $ctrlEditH) / 2 Dim $ctrlEditStyle = -1 Dim $ctrlEditStyleEx = -1 #EndRegion #EndRegion #Region GUI Initialization ;$gParent = GUICreate("", -1, -1, -1, -1, -1, $WS_EX_TOOLWINDOW) $gMain = GUICreate("", $gMainW, $gMainH, $gMainX, $gMainY, $gMainStyle, $gMainStyleEx) GUISetBkColor($COLOR_BLACK, $gMain) $ctrlEdit = GUICtrlCreateEdit("MainW: " & $gMainW & @CRLF & "MainH: " & $gMainH & @CRLF & "EditW: " & $ctrlEditW & @CRLF & "EditH: " & $ctrlEditH, $ctrlEditX, $ctrlEditY, $ctrlEditW, $ctrlEditH, $ctrlEditStyle, $ctrlEditStyleEx) GUISetState(@SW_SHOW, $gMain) #EndRegion MainFunction() #Region Main Function (GUI) Func MainFunction() While 1 $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then Exit EndIf WEnd EndFunc #EndRegion #Region Functions Func Functions() EndFunc #EndRegion #Region Program 1 Func Snippet_1() EndFunc #EndRegion #Region Program 2 Func Snippet_2() EndFunc #EndRegion #Region Program 3 Func Snippet_3() EndFunc #EndRegion #Region Program 4 Func Snippet_4() EndFunc #EndRegion #Region Program 5 Func Snippet_5() EndFunc #EndRegion #Region Program 6 Func Snippet_6() EndFunc #EndRegion #Region Program 7 Func Snippet_7() EndFunc #EndRegion #Region Program 8 Func Snippet_8() EndFunc #EndRegion #Region Program 9 Func Snippet_9() EndFunc #EndRegion #Region Pause/Exit Functions Func PauseProgram() While 1 Sleep(1000) WEnd EndFunc Func ExitProgram() Exit EndFunc #EndRegion Pause/Exit Functions #Region Snippets #CS #CE #EndRegion #Region Other Information #CS #CE #EndRegion That's the Debugger script. Please forgive anything ignorant but point it out if you will, I'll take any pointers to get better! (I usually use a Select to get $GUI_EVENT_CLOSE but this is early on)
      Now if I made another script with a basic GUI similar to this and wanted to read say the GUI Width ($gMainW) into the Debugger Edit Control could I do it? If so, could I do it for every variable I have in a script? I read something about the Run function and adding the variables as an option parameter I believe which I think I could do with an array to keep it from being super long and ugly but would that be the only way to do this? Any information is going to be appreciated and thank you in advance for your time!
       
      Edit: Sadly it just dawned on me that I could make a UDF that will create a child window that will do this instead of having a separate script trying to invade another... I'll still be keeping an eye on this for any comments but I apologize if I wasted your time!
    • By nooneclose
      Morning, I am wondering is there is a way to prevent a script from ending/crashing when a "Subscript used on non-accessible variable" error occurs? 
      Here is some of my code:
      $aItems = _OL_ItemFind($oOutlook, $mFolder[1], $olMail, "[UnRead]=True", "Subject", "Maintenance Request", "EntryID,Subject", "", 0) If @error Then Sleep(2000) LoopUnreadEmails() ;Exit MsgBox(48, "", "@error = " & @error & ", @extended: " & @extended & " at line: " & @ScriptLineNumber) EndIf Error Msg:
      (371) : ==> Subscript used on non-accessible variable.: $aItems = _OL_ItemFind($oOutlook, $mFolder[1], $olMail, "[UnRead]=True", "Subject", "Maintenance Request", "EntryID,Subject", "", 0) $aItems = _OL_ItemFind($oOutlook, $mFolder^ ERROR I know that error occurs very rarely and at random. But like with most errors "in this case" I can use recursion to fix it. 
      I just recall the function and it will and has fixed itself. But this "Subscript used on non-accessible variable" just ends the script.
      Like I said before, is there a way to allow the script to keep running or call a function when this error occurs instead of just ending?   
    • By max23ed
      Hi,  i'm recording a setup for a program using mouse clicks , however, the problem is when the setup installs (the progress bar showing) the auto generated script by the recorder will not have a winwait() or sleep() to click the "finish" button when the setup is completed. is there anyway to  do that automatically?
    • By panlatv
      Hello everybody (and sorry for my bad english)

      I try to get the position of a contextmenu (GUICtrlCreateContextMenu) on a TreeView, with ControlGetPos, but i can't.
      Someone can help me ? Thank you :)

      PS: I need the position to select item wtih rightclick before read the text of the item, because rightclick don't select item (only leftclick).
       
×
×
  • Create New...