Jump to content
  1. mLipok

    mLipok

  2. coffeeturtle

    coffeeturtle

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By t0nZ
      I was searching for a way to highlight zones (regions, provinces, counties, etc) on a map, and I don't need  super precise maps so I wrote this script, based on picking up black and white maps (2 colors BW .png or .gif tested) and filling them with colors, writing down a sqlite database to associate zones with names (and other data as well), and reuse the map and the DB to display data, in my example reading a simple .txt file.
      It's all based on this thread  and this other thread.

      So I have two modes:
      The Map "creation mode" : you provide a map image and you start to pick up colors, set "upper level" region/state, and by clicking on a region you fill it and you name it, and all the data are saved on a sqlite DB (auto-created) when you have the map image and a DB with the correct associations, you can switch the "mode" to "show" (as by .ini file) and the script tries to read a "datafile" showing the zone names listed in datafile. The code:
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=Icone\mapFlooder.ico #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ;MAP Flooder ;(C) NSC 2021 #include <GUIConstants.au3> #include <_GOLLOG.au3> #include <SQLite.au3> #include <SQLite.dll.au3> #include <Misc.au3> #include <GDIPlus.au3> Opt("mousecoordmode", 2) Global $prgname = "MAP Flooder", $ver = "V.0.7", $Buttoncolor = "0xFF00FF", $MPini = @ScriptDir & "\MapFlooder.ini", $btest Global $dbfullpath, $dbtable, $dbFields, $mapfile, $FloodMode, $datafile Global $HDC, $hBrush, $hGraphics, $obj_orig Global $Pic1, $gui, $width, $height, $bColor, $realtimeCoords, $lastclickcoords, $inputSup, $zonecountNum,$labeltest #Region program Gollog(">>>>>> Start MAP Flooder " & $ver) ctrlini() Gui() SQLiteDBcreate() If $FloodMode = "createdb" Then Gollog("CreateDB Mode") DBFlooder() Else Gollog("Show MAP mode") MapShow("show") EndIf Close() #EndRegion program #Region funcS Func Gui() _GDIPlus_Startup() $Pic1 = _GDIPlus_BitmapCreateFromFile($mapfile) $width = _GDIPlus_ImageGetWidth($Pic1) $height = _GDIPlus_ImageGetHeight($Pic1) If $FloodMode = "createdb" Then $gui = GUICreate($prgname & " " & $ver, $width + 150, $height) $labelLoadedMap = GUICtrlCreateLabel("Loaded Map", $width + 10, 5) $labelLoadedMap2 = GUICtrlCreateLabel(_FileToFileName($mapfile), $width + 10, 25) $labeldim = GUICtrlCreateLabel("Width*Height", $width + 10, 45) $labeldim2 = GUICtrlCreateLabel($width & " * " & $height, $width + 10, 65) $lastclickcoordslabel = GUICtrlCreateLabel("Last Click Coords", $width + 10, 100) $lastclickcoords = GUICtrlCreateLabel("xx - xx", $width + 10, 120, 180, 20) $realtimeCoordslabel = GUICtrlCreateLabel("Real Time Coords", $width + 10, 140) $realtimeCoords = GUICtrlCreateLabel("Real Time Coords", $width + 10, 160, 80, 20) $SuPzonelabel = GUICtrlCreateLabel("Supzone (region-state)", $width + 10, 200) $inputSup = GUICtrlCreateInput("sup", $width + 10, 220, 80, 20) $bColor = GUICtrlCreateButton($Buttoncolor, $width + 10, 250, 130, 30) GUICtrlSetBkColor($bColor, $Buttoncolor) $zonecountlabel = GUICtrlCreateLabel("Done Zone Count:", $width + 10, 320, 100, 20) $zonecountNum = GUICtrlCreateLabel("x", $width + 10, 340, 100, 20) $btest = GUICtrlCreateButton("TEST MAP", $width + 10, 380, 130, 30) $labeltest = GUICtrlCreateLabel("", $width + 10, 420, 130, 30) Else $gui = GUICreate($prgname & " " & $ver, $width, $height) EndIf GUISetState() $HDC = _WinAPI_GetDC($gui) $hGraphics = _GDIPlus_GraphicsCreateFromHDC($HDC) _GDIPlus_GraphicsDrawImageRect($hGraphics, $Pic1, 0, 0, $width, $height) EndFunc ;==>Gui Func MapShow($showmode) ; reading a simple text file with zone names, searching for names in DB and fill the map using stored coordinates If $showmode = "show" Then Local $aLines = FileReadToArray($datafile) Local $iLineCount = @extended EndIf If $showmode = "test" Then $iLineCount = 1 If @error Then MsgBox(48, "MapFlooder", "There was an error reading the data file. @error: " & @error) ; Gollog("There was an error reading the data file. @error: " & @error) Close() Else Gollog("start filling zones") _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database with zone definitions Local $hQuery, $aRow For $i = 0 To $iLineCount - 1 If $showmode = "show" Then _SQLite_Query(-1, "SELECT * FROM " & $dbtable & " where zone = '" & $aLines[$i] & "' ORDER BY zone ASC;", $hQuery) ; the query EndIf If $showmode = "test" Then _SQLite_Query(-1, "SELECT * FROM " & $dbtable & " ORDER BY zone ASC;", $hQuery) ; the query EndIf While _SQLite_FetchData($hQuery, $aRow) = $SQLITE_OK $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $aRow[2]) ; fill color read from DB $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $aRow[3], "int", $aRow[4], "int", 0x000000) If $showmode = "test" Then GUICtrlSetData($labeltest,$aRow[0]) Sleep(200) GUISetState() EndIf WEnd _SQLite_QueryFinalize($hQuery) Next _SQLite_Close() _SQLite_Shutdown() EndIf While 1 $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ExitLoop WEnd EndFunc ;==>MapShow Func DBFlooder() $zonecount = 0 While 1 $mp = MouseGetPos() GUICtrlSetData($realtimeCoords, $mp[0] & " - " & $mp[1]) $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ExitLoop If $msg = $bColor Then colorP() If $msg = $btest Then MapShow("Test") If $mp[0] < $width And $mp[1] < $height And _IsPressed("01") And WinActive($gui) Then $mp = MouseGetPos() GUICtrlSetData($lastclickcoords, $mp[0] & " - " & $mp[1]) $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $Buttoncolor) ; fill color ok $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $mp[0], "int", $mp[1], "int", 0x000000) Local $Zone = InputBox("Map Floode", "Zone ?") If $Zone = "" Or @error = 1 Then ; when manage wrong click, possibility to repeat ; set 'temp' color to highlight the 'wrong' click $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", 0x4ccfc6) ; fill color wrong $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $mp[0], "int", $mp[1], "int", 0x000000) ; restore color $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $Buttoncolor) ; fill color ok $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) Else _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database Local $SupZone = GUICtrlRead($inputSup) Local $data = '"' & $Zone & '","' & $SupZone & '","' & $Buttoncolor & '",' & $mp[0] & "," & $mp[1] _SQLite_Exec(-1, "INSERT INTO " & $dbtable & "(" & $dbFields & ") VALUES (" & $data & ");") If @error = -1 Then GOLLOG("Error insert record") MsgBox(48, "Error", "insert record") EndIf $zonecount += 1 GUICtrlSetData($zonecountNum, $zonecount) _SQLite_Close() _SQLite_Shutdown() EndIf EndIf WEnd EndFunc ;==>DBFlooder Func Close() Gollog("<<<<<<< closing...") _WinAPI_ReleaseDC($gui, $HDC) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit EndFunc ;==>Close Func SQLiteDBcreate() ;complete path e filename If Not FileExists($dbfullpath) Then GOLLOG("perform SQLite DB creation") Local $dbfolder = _FileToFilePath($dbfullpath) ;Local $dbfile = _FileToFileName($dbfullpath) If Not FileExists($dbfolder) Then DirCreate($dbfolder) ; =====================>>>>> START SQL DLL _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database ; creating first table If _SQLite_Exec(-1, "CREATE TABLE " & $dbtable & " (" & $dbFields & ");") = $SQLITE_OK Then GOLLOG("DB table - " & $dbtable & " - creation ok") Else GOLLOG("Error creating DB table : " & @error) EndIf _SQLite_Close() _SQLite_Shutdown() Else Gollog("DB already exist") EndIf EndFunc ;==>SQLiteDBcreate ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFilePath ; Description ...: Returns a folder path from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFilePath($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFilePath($sPath) Local $sReturn = StringLeft($sPath, StringInStr($sPath, "\", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFilePath ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileName ; Description ...: Returns a filename from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileName($sPath[, $bIncludeExtension = True]) ; Parameters ....: $sPath - a string value. ; $bIncludeExtension - [optional] a boolean value. Default is True. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileName($sPath, $bIncludeExtension = True) Local $sReturn = StringTrimLeft($sPath, StringInStr($sPath, "\", 0, -1)) If $bIncludeExtension = False Then $sReturn = StringLeft($sReturn, StringInStr($sReturn, ".", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFileName Func colorP() ; modified for BGR color GOLLOG("Color Picker") Local $color = _ChooseColor(2) If $color = -1 Then GOLLOG("no color selected") Else Local $sCr = Hex($color, 6) Local $RGB_Buttoncolor = '0x' & StringMid($sCr, 1, 2) & StringMid($sCr, 3, 2) & StringMid($sCr, 5, 2) GUICtrlSetBkColor($bColor, $RGB_Buttoncolor) ; BGR color $Buttoncolor = '0x' & StringMid($sCr, 5, 2) & StringMid($sCr, 3, 2) & StringMid($sCr, 1, 2) GUICtrlSetData($bColor, $Buttoncolor) GOLLOG("new color " & $Buttoncolor & " selected") EndIf EndFunc ;==>colorP Func ctrlini() ;ini read If FileExists($MPini) Then GOLLOG("found: " & $MPini) $mapfile = IniRead($MPini, "map", "mapfile", "") $datafile = IniRead($MPini, "map", "datafile", "") $dbfullpath = IniRead($MPini, "db", "dbfullpath", "") $dbtable = IniRead($MPini, "db", "dbtable", "") $dbFields = IniRead($MPini, "db", "dbfields", "") $FloodMode = IniRead($MPini, "mode", "mode", "") Else GOLLOG($MPini & " NOT found..") Close() EndIf EndFunc ;==>ctrlini #EndRegion funcS All the needed files plus some example (image maps and DBs)
      Link to all demo files
      To test, copy all in a single folder and adjust the mapflooder.ini, also you can add to you includes the _gollog.au3 (used for log, you can avoid it deleting all Gollog() lines)
       
       
       
       
       
    • By benners
      It seems  I'm always asking SQL questions in December,  must be a tradition. Here is the latest
      I have a database that is queried to return infomation about software installers and users. I can achieve what I want by calling two queries using _SQLite_QuerySingleRow, and adding the second query to the first returned array using _ArrayAdd. What I want to do is try to do it with one query.
      I don't have any code as I try the queries in SQLitexpert before to obtain the results and layout I require. The one below returns the information I want but the info is duplicated for every name that uses the program. I know this is down to my code
      SELECT [main].[platform].[id], [main].[installer].[path], [main].[package].[type], [main].[installer].[switches], [main].[minwinver].[version], [main].[category].[class], [main].[installer].[install_order], [main].[installer].[id] AS [id1], [main].[installer].[display_name], [main].[installer].[display_version], [main].[installer].[display_description], [main].[user].[username] FROM [main].[installer] INNER JOIN [main].[category] ON [main].[category].[id] = [main].[installer].[category_id] INNER JOIN [main].[installer_user] ON [main].[installer].[id] = [main].[installer_user].[installer_id] INNER JOIN [main].[user] ON [main].[user].[id] = [main].[installer_user].[user_id] INNER JOIN [main].[platform] ON [main].[platform].[id] = [main].[installer].[platform_id] INNER JOIN [main].[package] ON [main].[package].[id] = [main].[installer].[package_id] INNER JOIN [main].[minwinver] ON [main].[minwinver].[id] = [main].[installer].[minwinver_id] WHERE [main].[installer].[display_name] = 'SciTE4AutoIt3' AND [main].[installer].[id] = 5; What I have done is split the sql calls. This one gets the software
      SELECT [main].[platform].[id], [main].[installer].[path], [main].[package].[type], [main].[installer].[switches], [main].[minwinver].[version], [main].[category].[class], [main].[installer].[install_order], [main].[installer].[id] AS [id1], [main].[installer].[display_name], [main].[installer].[display_version], [main].[installer].[display_description] FROM [main].[installer] INNER JOIN [main].[category] ON [main].[category].[id] = [main].[installer].[category_id] INNER JOIN [main].[platform] ON [main].[platform].[id] = [main].[installer].[platform_id] INNER JOIN [main].[package] ON [main].[package].[id] = [main].[installer].[package_id] INNER JOIN [main].[minwinver] ON [main].[minwinver].[id] = [main].[installer].[minwinver_id] WHERE [main].[installer].[display_name] = 'SciTE4AutoIt3' AND [main].[installer].[id] = 5; This one gets the users. The users will be added to a combo so it doesn't matter if it's an array, but I would prefer a delimited string return.
      SELECT group_concat([main].[user].[username]) FROM [main].[installer] INNER JOIN [main].[installer_user] ON [main].[installer].[id] = [main].[installer_user].[installer_id] INNER JOIN [main].[user] ON [main].[user].[id] = [main].[installer_user].[user_id] WHERE [main].[installer].[id] = 5 ORDER BY [main].[installer_user].[user_id]; Is it possible to return the result in the second example along with the third in one array using SQLite. I have been googling and trying different things that are obviously incorrect. I have attached the database in question.
      Thanks
      Installers.dbc
    • By mLipok
      I want to present BETA Version of my ADO.au3 UDF.
      This is modifed version of _sql.au3 UDF.
       
      For that I want to thanks : ; Chris Lambert, eltorro, Elias Assad Neto, CarlH
       
      This is first public release , and still is as BETA
       
       
      DOWNLOAD LINK (in download section): 
       
       
      Have fun,
      mLipok
       
       
      EDIT: 2016-06-03
      Below some interesting topics about databases:
       
       
      EDIT 2016/07/04:
      For more info about ADO look here:
      https://www.autoitscript.com/wiki/ADO
      FOR EXAMPLE DATABASE use AdventureWorksDW2016_EXT.bak from:
      https://github.com/microsoft/sql-server-samples/releases/download/adventureworks/AdventureWorksDW2016_EXT.bak
      I will relay on this database in my examples.
       
      Here is link to post which shows how "ODBC Data Source Administrator" looks like.
       
    • By PoojaKrishna
      Hi,
      I am trying to connect to a remote SQL Server. But it return the error: [Microsoft][ODBC SQL Server Driver] Cannot open database "data base" requested by the login. The login failed. I could connect to the remote server and view the database and tables through MS SQL Server management studio using the server name and credentials. 
        Please help.
      $objErr = ObjEvent("AutoIt.Error","MyErrFunc") $sServer = 'server_name' $sDatabase = 'databse_name' $sUID = 'user' $sPWD = 'pwd' $oConn = ObjCreate ("ADODB.Connection") $DSN = 'DRIVER={SQL Server};SERVER=' & $sServer & ';DATABASE=' & $sDatabase & ';UID=' & $sUID &';PWD=' & $sPWD & ';' $oConn.ConnectionTimeout = 10 ; default is 15 s (must be supported by data provider DSN) $oConn.Open($DSN) If @error Then Exit $oConn.Close MsgBox(64, 'OK', 'Finished') Func MyErrFunc() MsgBox(48, 'COM Error', $objErr.description) SetError(1) EndFunc #cs With $oConn .Provider = "SQLOLEDB" .Properties("Initial Catalog") = $sDatabase .Properties("Data Source").Value = $sServer .Properties("Integrated Security").Value = "SSPI" .Properties("Persist Security Info").Value = "True" .Properties("User ID").Value = $sUID .Properties("Password").Value = $sPWD .Open EndWith If @error then Exit #ce  
    • By t0nZ
      Code to read a Spiceworks Database and export text data files in INI format.
      Focused on exporting data about PC inventory and useful to migrate to another inventory system.
      Tested with a SQLite DB from Spiceworks latest (and LAST on premise) version - (7.5.00107.30 ott 2019)
      It creates one  text file for every single machine.
       
      ;Spiceworks Db Exporter ; ;- NSC - t0nZ 2021 ;code to read a Spiceworks Database and export text data files in INI format. ;focused on exporting data about PC inventory. ;useful to migrate to another inventory system. ;tested with a SQLite DB from Spiceworks latest (and LAST on premise) version - (7.5.00107.30 ott 2019) ;It creates one text files for every single machine. ; --> please adapt paths to your environment. #include <SQLite.au3> #include <String.au3> #include <File.au3> dataINIfromDBspiceworks() #Region spiceworks immport Func dataINIfromDBspiceworks() ConsoleWrite("start import from db Spiceworks" & @CRLF) Local $dbspicepath = "C:\scambio" Local $dbspice = "spiceworks_prod.db" ; =====================>>>>> START SQL DLL _SQLite_Startup() ;======================<<<<<<<<<<<<<<<<<<< _SQLite_Open($dbspicepath & '\' & $dbspice) ;- Local $aCPdata Local $hQuery Local $recordcount = 0 Local $salvarec = 0 ;------------------------------------------------ Local $spiceQuery = "SELECT serial_number," & _ "server_name," & _ "manufacturer," & _ "(model || '-' || raw_model)," & _ "processor_type," & _ "raw_processor_type," & _ "processor_architecture," & _ "raw_processor_type," & _ "number_of_processors," & _ "'speed'," & _ "CAST (memory AS FLOAT) / 1073741824," & _ "current_user," & _ "domain," & _ "network_adapters.dns_domain," & _ "'logon'," & _ "operating_system," & _ "os_architecture," & _ "version," & _ "'lang'," & _ "('C:;Fixed;' || (CAST (disks.size AS FLOAT) / 1048576) || ';' || (CAST (disks.free_space AS FLOAT) / 1048576) )," & _ "devices.ip_address," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "network_adapters.gateway," & _ "(network_adapters.description ||' - '|| network_adapters.name)," & _ "devices.mac_address," & _ "devices.updated_on," & _ "user_tag " & _ "FROM devices " & _ "inner JOIN " & _ "network_adapters ON network_adapters.computer_id = devices.id " & _ "inner JOIN " & _ "disks ON disks.computer_id = devices.id " & _ "WHERE disks.name = 'C:' " & _ "ORDER BY devices.updated_on DESC;" _SQLite_Query(-1, $spiceQuery, $hQuery) While _SQLite_FetchData($hQuery, $aCPdata) = $SQLITE_OK writeINI($aCPdata) $recordcount += 1 If $recordcount = $salvarec + 10 Then $salvarec = $recordcount ConsoleWrite($recordcount & " processed records " & @CRLF) EndIf WEnd ;________________________________________________ _SQLite_Close() _SQLite_Shutdown() EndFunc ;==>dataINIfromDBspiceworks Func writeINI($aCPdata) Local $folderdataINI = "c:\scambio\ini" If Not FileExists($folderdataINI) Then DirCreate($folderdataINI) $aCPdata[28] = StringRegExpReplace($aCPdata[28], "[\D]", "") ; this "2021-04-17 02:34:16" to that "20210417023416 Local $cpini = $folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini" If FileExists($folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini") Then FileDelete($folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini") ; deleted previous files ! ConsoleWrite("deleted: " & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini" & @CRLF) EndIf ;Section Unique :serial, computer name Local $aSectionUnique[2][2] = [["serial", $aCPdata[0]], ["computername", $aCPdata[1]]] IniWriteSection($cpini, "UNIQUE", $aSectionUnique, 0) ;Section Machine :manufacturer,model,cpuname,cpuid,cpuarc,cpuvendor,cpucores,cpuspeed,RAM,disk1capacity,disk1used Local $aSectionMachine[9][2] = [["manufacturer", $aCPdata[2]], ["model", $aCPdata[3]], ["cpuname", $aCPdata[4]], ["cpuid", $aCPdata[5]], ["cpuarc", $aCPdata[6]], ["cpuvendor", $aCPdata[7]], ["cpucores", $aCPdata[8]], ["cpuspeed", $aCPdata[9]], ["ram", $aCPdata[10]]] IniWriteSection($cpini, "MACHINE", $aSectionMachine, 0) ;Section User : username,domain,DNSdomain,logonServer Local $aSectionUser[4][2] = [["username", $aCPdata[11]], ["domain", $aCPdata[12]], ["DNSdomain", $aCPdata[13]], ["logonServer", $aCPdata[14]]] IniWriteSection($cpini, "USER", $aSectionUser, 0) ;Section OS : OSver, OSarch, OSbuild, OSlang Local $aSectionOS[4][2] = [["OSver", $aCPdata[15]], ["OSarch", $aCPdata[16]], ["OSbuild", $aCPdata[17]], ["OSlang", $aCPdata[18]]] IniWriteSection($cpini, "OS", $aSectionOS, 0) ;Section Disks: username,domain,DNSdomain,logonServer Local $aSectionDrives[1][2] = [["drives", $aCPdata[19]]] IniWriteSection($cpini, "DRIVES", $aSectionDrives, 0) ;Section network:localIP1,localIP2,localIP3,localIP4,publicIP,GW,adapter,mac Local $aSectionNetwork[8][2] = [["localIP1", $aCPdata[20]], ["localIP2", $aCPdata[21]], ["localIP3", $aCPdata[22]], ["localIP4", $aCPdata[23]], ["publicIP", $aCPdata[24]], ["GW", $aCPdata[25]], ["adapter", $aCPdata[26]], ["mac", $aCPdata[27]]] IniWriteSection($cpini, "NETWORK", $aSectionNetwork, 0) ;Section PLUS :date, groupid Local $aSectionPlus[2][2] = [["date", $aCPdata[28]], ["groupid", $aCPdata[29]]] IniWriteSection($cpini, "PLUS", $aSectionPlus, 0) EndFunc ;==>writeINI #EndRegion spiceworks import  
      Spiceworks on premise, now pretty abadonware, has a non crypted SQLite DB usually located in:
      c:\Program Files (x86)\Spiceworks\db\spiceworks_prod.db The query was the difficult part (at least for me), and I export in INI format because it was part of my effort to migrate from Spiceworks to a custom made system (Computer Plucker see this post) where I already parse .INI files in a custom MySQL and/or SQLite DB.
       
×
×
  • Create New...