Jump to content
Gorby7

Execute SQL stored procedure with table parameter - from AutoIT

Recommended Posts

I have an Autoit-based client GUI that uses a single MS SQL Server database. I have no problem connecting to and executing queries against this database from my AutoIT code, with the below exception:

One of the database's stored procedures I need to execute requires a parameter that is a table. I've set up the appropriate table_type on the database and everything works fine on the database itself when I execute the stored proc with a table variable for the parameter (no AutoIT involved). The problem is that I can't figure out how to pass a table parameter from AutoIT, assuming it's even possible. The code below shows the two methods I've tried, both methods return a RecordSet object that is at EOF.

#include <Array.au3>

Opt("MustDeclareVars", 0)

$sDBSrv = "ITSQL01.domain.com"
$sDBName = "INVDEV"
$sADOName = "ADODB.Connection"

$oSQLConn = ObjCreate($sADOName)
$sConnStr = "Driver={SQL Server};Server=" & $sDBSrv & ";Database=" & $sDBName & ";Trusted_Connection=yes;"
$oSQLConn.Open ($sConnStr)
$rsoFacFriendly = $oSQLConn.Execute("SELECT TOP 5 FriendlyName FROM Facility")
If Not $rsoFacFriendly.EOF Then $aFacFriendly = $rsoFacFriendly.GetRows()

_ArrayDisplay($aFacFriendly)

$rsoSPResults = $oSQLConn.Execute("EXEC spTableParameterPassTest " & $aFacFriendly)
Select
    Case $rsoSPResults.EOF = False
        MsgBox(0, "sp exec1", "not end of file")
        $aSPResults = $rsoSPResults.GetRows()
        _ArrayDisplay($aSPResults)
    Case IsObj($rsoSPResults) = 0
        MsgBox(0, "sp exec1", "rso isn't even an object")
    Case $rsoSPResults.EOF = True
        MsgBox(0, "sp exec1", "At end of file")
    Case Else
        MsgBox(0, "sp exec1", "Something else happened")
EndSelect

$rsoSPResults = 0

$rsoSPResults = $oSQLConn.Execute("EXEC spTableParameterPassTest " & $rsoFacFriendly)
Select
    Case $rsoSPResults.EOF = False
        MsgBox(0, "sp exec2", "not end of file")
        $aSPResults = $rsoSPResults.GetRows()
        _ArrayDisplay($aSPResults)
    Case IsObj($rsoSPResults) = 0
        MsgBox(0, "sp exec2", "rso isn't even an object")
    Case $rsoSPResults.EOF = True
        MsgBox(0, "sp exec2", "At end of file")
    Case Else
        MsgBox(0, "sp exec2", "Something else happened")
EndSelect

$rsoSPResults = 0
$rsoFacFriendly = 0
$oSQLConn.Close
$oSQLConn = 0

Exit

 

Edited by Gorby7
Clarified Summary/title

Share this post


Link to post
Share on other sites

Look in my ADO.au3 UDF there is example about using stored procedures.

 


Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest beginning - communication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library *

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2019-10-01

Share this post


Link to post
Share on other sites

That UDF would've saved me some time had I known about it earlier! Maybe it's my lack of MSSQL expertise, but I don't see how any of those functions in ADO.au3 would allow me to execute a stored procedure with a parameter that is a table/recordset.

Share this post


Link to post
Share on other sites

Do you have any working example for example written in VB ?


Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest beginning - communication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library *

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2019-10-01

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By cptHark
      Hello I want to conect to a Network with DriveMapAdd.
      This worked just fine but when you restart the Computer the Mapped drive is gone.
      So i used the persistent mapping flag and that seemed to work, too.
      However when the Computer is restarted I cant connect to the Network because it doesnt remember the Username and password I ave it the first time.
      How do I fix this?
      My Code:Func
      setdrivem()
          DriveMapAdd("M:", GUICtrlRead($driveM),1, GUICtrlRead($netzuser),GUICtrlRead($netzpassword) )
      EndFunc
      $netzuser and $netzpassword are set earlier in the gui and it works right after executing the script but i want it to stay connected
    • By nooneclose
      Morning, I am wondering is there is a way to prevent a script from ending/crashing when a "Subscript used on non-accessible variable" error occurs? 
      Here is some of my code:
      $aItems = _OL_ItemFind($oOutlook, $mFolder[1], $olMail, "[UnRead]=True", "Subject", "Maintenance Request", "EntryID,Subject", "", 0) If @error Then Sleep(2000) LoopUnreadEmails() ;Exit MsgBox(48, "", "@error = " & @error & ", @extended: " & @extended & " at line: " & @ScriptLineNumber) EndIf Error Msg:
      (371) : ==> Subscript used on non-accessible variable.: $aItems = _OL_ItemFind($oOutlook, $mFolder[1], $olMail, "[UnRead]=True", "Subject", "Maintenance Request", "EntryID,Subject", "", 0) $aItems = _OL_ItemFind($oOutlook, $mFolder^ ERROR I know that error occurs very rarely and at random. But like with most errors "in this case" I can use recursion to fix it. 
      I just recall the function and it will and has fixed itself. But this "Subscript used on non-accessible variable" just ends the script.
      Like I said before, is there a way to allow the script to keep running or call a function when this error occurs instead of just ending?   
    • By max23ed
      Hi,  i'm recording a setup for a program using mouse clicks , however, the problem is when the setup installs (the progress bar showing) the auto generated script by the recorder will not have a winwait() or sleep() to click the "finish" button when the setup is completed. is there anyway to  do that automatically?
    • By nooneclose
      I was running my script and everything was working fine and then it just stopped working. 
      I got this error message:
      !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6 I looked that error up and this article (https://www.autoitscript.com/trac/autoit/ticket/2541) said it was fixed a long time ago. 
      I am using version: SciTE Version 4.1.0, how am I getting this error? (first time I got it after running my code 50+ times)
      it crashed while trying to loop through emails. 
      Full output log:
      >"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" /run /prod /ErrorStdOut /in "C:\" /UserParams +>12:46:01 Starting AutoIt3Wrapper v.18.708.1148.0 SciTE v.4.1.0.0 Keyboard:00000409 OS:WIN_10/ CPU:X64 OS:X64 Environment(Language:0409) CodePage:0 utf8.auto.check:4 +> SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE >Running AU3Check (3.3.14.5) from:C:\Program Files (x86)\AutoIt3 +>12:46:01 AU3Check ended.rc:0 >Running:(3.3.14.5): --> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop Action 1: Create a connection to the outlook account at line: 192 Action 1: Finished at line: 205 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Current email has been changed from Unread to Read. at line: 238 Current email has been changed from Unread to Read. at line: 238 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 3: Store vaild E-mails at line: 258 Number of unread E-mails: 17 at line: 290 Action 3: Finished at line: 292 Current number of processed Emails is: 0 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Opening a new Chrome window. at line: 2747 Action 8: Open Web Browser at line: 2240 _WDStartup: "MicrosoftWebDriver.exe" --verbose Action 8: Finished at line: 2270 Action 9: Navigate to Work Order Tracking at line: 2281 Action 9: Finished at line: 2295 Action 10: Click on Create New Work Order at line: 2306 Action 10: Finished Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660308 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 1 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660309 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 2 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660310 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 3 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660311 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 4 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660312 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 5 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660313 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 6 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660314 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 7 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: CN2116 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660315 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 8 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4905 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660316 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 9 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6513 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Young Tower has no suites! Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660317 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 10 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3310 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660318 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 11 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3411 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660319 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 12 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4519 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660320 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 13 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6  
    • By mlazovjp
      I am going through the AutoIt Wiki and soaking up a lot of great information.  On the “Best Coding Practices” page at https://www.autoitscript.com/wiki/Best_coding_practices#Scopes_of_Variables there seems to be a minor detail missing.  In the “Variable Initialization” section at https://www.autoitscript.com/wiki/Best_coding_practices#Variable_Initialization , there are references to a data type $o, but in the table listing prefixes and their data types, there does not appear to be a prefix “o”.  I assume that this is for Object?
×
×
  • Create New...