Jump to content
  1. dandz

    dandz

  2. LukeLe

    LukeLe

  • Similar Content

    • By Yodavish
      My AutoIt script works fine, for the most part, however, if it goes idle for roughly 30 minutes, it will won't be able to send data to a 3rd party application window titled, "Case #". 
      The problem lies within the function "SendFusion", it's able to see the handle for the "WinActivate" and "WinWaitActivate" (I've also tried putting in 10 seconds in the WinWaitActivate as well, doesn't work). However, if we have been idle, it will always fail to send data afterward. On what I've tried so far:
      "Send" function with the data and a {ENTER} i.e. Send($CaseTxt & "{ENTER}"), this won't even hit the enter key  ControlSetText, tried passing the handle from WinActivate, using the title "Case #" that was copied directly from the Autoit Window Info, hard coding the title, Using CLASS:WindowsForms10... always returns a 0 ControlCommand (same as above) always returns a 0 ControlGetFocus always returns a 0 ControlFocus, always returns a 0 Creating a new and simple Au3 script that just sends data to "Case #", also fails NOTE: If I close the Au3 script and just scan the data directly into the "Case #" or even type it, it works fine with no issues. I'm confused as to why it would not work after a long idle period?
      Below are the essential parts of the script, I can provide the entire thing if needed. Any suggestions would be greatly appreciated!
      #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <Process.au3> #include <Misc.au3> #include <IE.au3> ;--------------------------------------------------------------- ; Only one instance can run ;--------------------------------------------------------------- If _Singleton("gross.exe", 1) = 0 Then MsgBox($MB_SYSTEMMODAL, "Warning", "Gross.exe is already running. Please exit the existing version first (check the icons in the lower right corner of your screen) before running it again.") Exit EndIf ;--------------------------------------------------------------- ; AutoIt Options ;--------------------------------------------------------------- Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Opt("WinWaitDelay", 0) ; Alters how long a script should briefly pause after a successful window-related operation. Time in milliseconds to pause (default=250). Opt("WinTextMatchMode", 1) ; Alters the method that is used to match window text during search operations. 2 = Quick mode Opt("SendKeyDelay", 0) ; Alters the length of the brief pause in between sent keystrokes. A value of 0 removes the delay completely. Time in milliseconds to pause (default=5). if ($fusionWindowTitle="NONE" or $fusionCaseNumWinTitle="NONE" or $appWindowTitle="NONE" or $winActivateTimeout="NONE" or $winCloseTimeout="NONE" or $winWaitTimeout="NONE" or $pdfViewerWidth="NONE" or $pdfViewerHeight="NONE" or $pdfViewerLeft="NONE" or $pdfViewerWindowName="NONE" or $pdfViewerExeName="NONE" or $pdfUrl="NONE" or $pdfDownloadCommand="NONE") Then Msgbox(0,"ERROR", "gross.ini is missing or does not contain all settings. Please contact Help Desk with this information") Exit -1 EndIf ;--------------------------------------------------------------- ; application settings/constants ;--------------------------------------------------------------- Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") ;--------------------------------------------------------------- ; create the main window ;--------------------------------------------------------------- Local $mainWindow = GUICreate($appWindowTitle, 380, 190) ; create the main GUI window GUISetOnEvent($GUI_EVENT_CLOSE, "handleCloseClick") ; when the click the windows close button call handleCloseClick() WinSetOnTop($appWindowTitle, '', 1) ; Sets main GUI always on top ;--------------------------------------------------------------- ; create the controls on the main window ;--------------------------------------------------------------- Local $okButton = GUICtrlCreateButton("OK", 160, 160, 54,24) ; create OK button GUICtrlSetOnEvent($okButton, "validateInput") ; when they click ok, call handleInputProcessRequest() GUICtrlCreateLabel("Scan Input", 10, 10) ; create a label Global $inputScan = GUICtrlCreateInput("", 10,134,358) ; create the input scan box GUICtrlSetOnEvent($inputScan, "validateInput") ; when they press enter in the scan input box, call handleInputProcessRequest() GUICtrlSetState($inputScan,$GUI_FOCUS) ; automatically sets focus on the input field GUISetState(@SW_SHOW) ; main GUI loop that runs at all times ;--------------------------------------------------------------- While 1 ;---------------------------------------------------------- ; If sumatraPDF active, resets focus back to GUI ;---------------------------------------------------------- If WinActive($pdfViewerWindowName) Then consoleWrite('While Loop sumatraPDF was active' & @CRLF) setMainWindow() ;---------------------------------------------------------- ; After data sent to ProTracker, check for mismatch ; save button to trigger the event handler when clicked ;---------------------------------------------------------- ElseIf WinActive($proTrackerWindowTitle) Then $ie = _IEAttach("ProTracker") $mismatchButton = _IEGetObjByName($ie, $proTrackerMisMatchButtonId) $oEvent = ObjEvent($mismatchButton, "mismatchButton_") If @error Then setMainWindow() ;--------------------------------------------------------------------- ; If Fusion is prompting for the case #, focus back to main GUI input ; If second GUI 'Unknown' detect do nothing ;--------------------------------------------------------------------- ElseIf WinExists($fusionWindowTitle) and WinExists($fusionCaseNumWinTitle) and Not WinActive($mainWindow) and Not WinExists('Unknown Input') Then setMainWindow() EndIF ;--------------------------------------------------------------------- ; Checks if $processFlag = Done, if so, shows PDF viewer and clears ; processFlag for next iteration ;--------------------------------------------------------------------- IF WinExists($pdfViewerWindowName) and $processFlag == 'Done' Then WinSetState ($pdfViewerWindowName, '', @SW_SHOW) $processFlag = '' setMainWindow() EndIF Sleep(100) ; Sleep to reduce CPU usage WEnd Func handleInputProcessRequest($input) $processFlag = True Local $hTimer = TimerInit() consoleWrite('> handleInputProcessRequest: ' & @CRLF) Local $idInput = identifyInput($input) ; Select a proccess to run based on id input Select Case $idInput = "container" ; regex that captures only the case number $caseTxt = StringUpper(StringRegExpReplace($strippedInputData, '\??(\w*\d*-\d*|\d*).*$','$1')) If WinExists($fusionWindowTitle) and WinExists($fusionCaseNumWinTitle) Then sendProTracker(StringUpper($strippedInputData)) sendFusion($caseTxt) ; gets pdf for sumatraPDF in seperate script, since that function is the slowest Run("viewPDF.exe " & $caseTxt) ;getSumatraPDF($caseTxt) $lastCaseNum = $caseTxt Else ; Checks to make sure the previous "Container" case num is the same ; to the current Container case num, before sending to ProTracker If($lastCaseNum <> $caseTxt) Then ; If not the same case number send alert sound SoundPlay("error.wav") Else sendProTracker($strippedInputData) EndIf EndIf Case $idInput = "user" sendProTracker($strippedInputData) Case $idInput = "cassette" sendProTracker(StringUpper($strippedInputData)) Case $idInput = "unknown" selectUnknown() EndSelect Local $fDiff = TimerDiff($hTimer) $processFlag = 'Done' consoleWrite('> handleInputProcessRequest Completed Total time: ' & $fDiff & ' ' &@CRLF&@CRLF&@CRLF) EndFunc Func sendFusion($caseTxt)     Local $hTimer = TimerInit()     consoleWrite('+ sendFusion initiated: ' & $caseTxt & @CRLF)     If $caseTxt = "" Then         MsgBox(0, "Error", "Not a valid case number")     Else         ;$fusionCaseNumWinTitle = "Case #"         $retVal1 = WinActivate($fusionCaseNumWinTitle, "")         consoleWrite("ReturnValue WinActivate " & $retVal1 & @CRLF)         $retVal2 = WinWaitActive($fusionCaseNumWinTitle,"",$winActivateTimeout)         consoleWrite("ReturnValue WinWaitActive: " & $retVal2 & @CRLF)         $retVal3 = ControlSetText($fusionCaseNumWinTitle, "", "", $caseTxt)         ;$retVal3 = ControlCommand($fusionCaseNumWinTitle, "", "", "EditPaste", $caseTxt)         consoleWrite("ReturnValue ControlSetText: " & $retVal3 & @CRLF)         ;Send($caseTxt & "{ENTER}")         WinWaitClose($fusionCaseNumWinTitle, "", $winCloseTimeout)         consoleWrite('+ sendFusion WinWaitClose: ' & @CRLF)     EndIf     Local $fDiff = TimerDiff($hTimer)     ConsoleWrite('+ sendFusion Completed Total time:' & $fDiff & ' ' & @CRLF) EndFunc
      Console logs from the SciTLE
      Window (x86) Info matches the correct handle for the WinActivate and WinWaitActivate

      Window Control (x86) Info, I've tried the CLASS, the ID, also I just noticed that the "handle" in "Control" and "Window" appear to be different as well.

       
      So far the only work-around is to close down the 3rd party application and the AutoIt script, re-open them and it works all completely fine. But this is a pain for the end-user since it's all touch screen and it slows down their workflow, which they can be extremely sensitive about.
       
    • By nacerbaaziz
      hello autoit group
      please i've a question
      i had make a function that put some thing into the clipBoard and paste it
      using the send function
      e.g
      ClipPut("hello")
      send("^v")
       
      when the keyboard is english all things work fine
      but when the keyboard is arabic the send command write the ltr v insted of the text in clipboard
      i was tryed to use
      send("{ctrldown}v{ctrlUp}")
      but the same
      please can any one help me
       
    • By wysocki
      I have a smartphone and I use it to access my email. However, when composing an email on it I have a problem. My list of phone contacts on the phone is very different from my list of email contacts in my Thunderbird desktop app.  I use my Gmail address book to store primarily phone contacts, and I use Thunderbird for my list of email contacts. I wanted a way to get my Thunderbird contact list onto my smartphone to be able to compose emails to addresses in that list. Here's my solution.
      I wrote a script to export my Thunderbird Personal Address Book to a csv file. It then reads that file and re-writes it with html wrappers around the data to make it into a nicely formatted web page. It then uploads the htm file to my website. On my smartphone, I created a shortcut to the file's URL and whenever I click it, I get the list displayed. Each contact shows name and email address along with a COPY button that will put the address into the clipboard. Then in my email client, I can easily paste that address into it. Alternatively, clicking on the actual email link will open a new message dialog in your email client with that address already entered.
      To use the app, all you need to do is use Thunderbird and have a webserver available. You'll need to download the FTPEX.AU3 file from this website and make a few changes to some constants around line 17 for FTP login info, etc.
       
      pab2ftp.au3
    • By SkysLastChance
      What would be the best way to grab the last digits of this <span>? One of the problems I know I am going to have is sometimes it will be 1 digit other times it might be 3. 

      I am trying to get the list of spans and I get this error.

       
      $oInputs = _IETagNameGetCollection($oIE, "span") $sTxt = "" For $oInput In $oInputs     $sTxt &= $oInput.Innertext & @CRLF Next MsgBox($MB_SYSTEMMODAL, "Form Input Type", "Form: " & $oInput.form.name & @CRLF & @CRLF & "         Types :" & @CRLF & $sTxt)  
    • By matwachich
      Hi guys!
      A pretty simple UDF to convert HTML to PDF using wkHTMLtoPDF.
      It uses the C API of the tool (DLL), so no external process, no ActiveX or COM sh*t.
      See the example, and the documentation of wkHTMLtoPDF.
      Cheers
      https://github.com/matwachich/wkhtmltopdf-au3
×
×
  • Create New...