Jump to content

Recommended Posts

Good morning community! :)
I was working on a script which read the content of a .ini file to retrieve the file that has to open, and, based on the value of a second key stored in the .ini file, set the window on top, minimized or maximized...
I did something like this, but seems to not work properly...
Could anyone please tell me what I'm doing wrong?
Thank you :) 
 

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Outfile_x64=prova.exe
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <MsgBoxConstants.au3>
#include <AutoItConstants.au3>
;#include <WinAPIEx.au3>
#include <Array.au3>

Local $sFileConfigurazione = @ScriptDir & "\configurazione_exe.ini"

If(FileExists($sFileConfigurazione)) Then
    Local $aSezioneIni = IniReadSection($sFileConfigurazione, "CONFIGURAZIONE_EXE")
    If @error Then
        MsgBox($MB_ICONERROR, "Errore!", "Errore durante l'apertura del file: " & @CRLF & $sFileConfigurazione & @CRLF & "Errore: " & @error)
    Else
        ; Lancio dell'applicativo indicato nel file di configurazione
        Local $iPID = ShellExecute($aSezioneIni[1][1])
        Local $hWnd
        If($iPID <> 0) Then
            Local $aWinList = WinList()
            For $i = 1 To $aWinList[0][0]
                If(WinGetProcess($aWinList[$i][1] = $iPID)) Then
                    $hWnd = $aWinList[$i][1]
                EndIf
            Next
            Switch($aSezioneIni[2][1])
                Case $aSezioneIni[2][1] = "MIN"
                    ToolTip("MIN", 0, 0)
                    WinSetState($hWnd, WinGetTitle($hWnd), @SW_MINIMIZE)
                Case $aSezioneIni[2][1] = "MAX"
                    ToolTip("MAX", 0, 0)
                    WinSetState($hWnd, WinGetTitle($hWnd), @SW_MAXIMIZE)
                Case $aSezioneIni[2][1] = "TOP"
                    ToolTip("TOP", 0, 0)
                    WinSetOnTop($hWnd, WinGetTitle($hWnd), $WINDOWS_ONTOP)
            EndSwitch
        EndIf
    EndIf
EndIf

And the .ini file is like this:
 

[CONFIGURAZIONE_EXE]
PercorsoExe=Here goes the path and the .exe to execute
ModalitaAperturaExe=Here goes one of the value below
/* TOP Shows the windows on top */
/* MIN Shows the window minimized */
/* MAX Shows the window maximized */

 

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites
  • Moderators

FrancescoDiMuro,

This works for me. I have highlighted the changes (<<<<<<<<):

#include <Array.au3>
#include <AutoItConstants.au3>

$iPID = ShellExecute("text.txt")

; Use placeholder as flag for success <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Local $hWnd = 9999

Do
    ; List GUIs
    $aWinList = WinList()
    ; Check if PID found and if GUI is visible <<<<<<<<<<<<<<<<
    For $i = 1 To $aWinList[0][0]
        If WinGetProcess($aWinList[$i][1]) = $iPID And BitAND(WinGetState($aWinList[$i][1]), 2) Then
            ; Store handle
            $hWnd = $aWinList[$i][1]
            ; Stop searching <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
            ExitLoop
        EndIf
    Next
    ; Save CPU
    Sleep(10)

Until $hWnd <> 9999 ; Keep looking until GUI appears <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

$iMode = InputBox("Mode", "1, 2, 3")

Switch $iMode
    Case 1 ; Use correct syntax for Switch - you were using Select syntax <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
        ToolTip("MIN", 0, 0)
        WinSetState($hWnd, "", @SW_MINIMIZE)
    Case 2
        ToolTip("MAX", 0, 0)
        WinSetState($hWnd, "", @SW_MAXIMIZE)
    Case 2
        ToolTip("TOP", 0, 0)
        WinSetOnTop($hWnd, "", $WINDOWS_ONTOP)

EndSwitch

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

@Melba23
Thank you for you corrections :)
I'll try your code asap :)
 

2 hours ago, Melba23 said:

you were using Select syntax <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Sorry for the mistake... Better if I change the Switch...Case to the Select...Case, in order to tell the script what I mean! :)
Again, thank you, and have a wonderful day :)

EDIT:

Bizzarre things here!
If I use this code, and try to run Notepad, I can't click anymore on anything on the first screen ( I have 2 screens )...
I have added everything you suggested to me LESS the control over the visible of the GUI...
What the?!

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Outfile_x64=prova.exe
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <MsgBoxConstants.au3>
#include <AutoItConstants.au3>
;#include <WinAPIEx.au3>
#include <Array.au3>

Local $sFileConfigurazione = @ScriptDir & "\configurazione_exe.ini"

Local $aWinList

If(FileExists($sFileConfigurazione)) Then
    Local $aSezioneIni = IniReadSection($sFileConfigurazione, "CONFIGURAZIONE_EXE")
    If @error Then
        MsgBox($MB_ICONERROR, "Errore!", "Errore durante l'apertura del file: " & @CRLF & $sFileConfigurazione & @CRLF & "Errore: " & @error)
    Else
        ; Lancio dell'applicativo indicato nel file di configurazione
        Local $iPID = ShellExecute($aSezioneIni[1][1])
        Local $hWnd = 9999 ; Placeholder for success
        If($iPID <> 0) Then
            Do
                $aWinList = WinList()
                For $i = 1 To $aWinList[0][0]
                    If(WinGetProcess($aWinList[$i][1] = $iPID)) Then
                        $hWnd = $aWinList[$i][1]
                        ExitLoop
                    EndIf
                Next
                Sleep(10) ; Save CPU
            Until $hWnd <> 9999
            Select
                Case $aSezioneIni[2][1] = "MIN"
                    ToolTip("MIN", 0, 0)
                    WinSetState($hWnd, WinGetTitle($hWnd), @SW_MINIMIZE)
                Case $aSezioneIni[2][1] = "MAX"
                    ToolTip("MAX", 0, 0)
                    WinSetState($hWnd, WinGetTitle($hWnd), @SW_MAXIMIZE)
                Case $aSezioneIni[2][1] = "TOP"
                    ToolTip("TOP", 0, 0)
                    WinSetOnTop($hWnd, WinGetTitle($hWnd), $WINDOWS_ONTOP)
            EndSelect
        EndIf
    EndIf
EndIf

EDIT 2:

Even If I copy-pasted your code, it doesn't work for me, launching Notepad...
I don't know why...

Edited by FrancescoDiMuro

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites
  • Moderators

FrancescoDiMuro,

Change

If(WinGetProcess($aWinList[$i][1] = $iPID)) Then

to read

If WinGetProcess($aWinList[$i][1]) = $iPID Then

and it will work.

Might I suggest NOT placing parentheses around the arguments for If comparisons - they are only really necessary when using Not to make sure you apply the logical operator to only the required part of the expression.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

Good morning @Melba23:)
Thank you for your suggestion... I applied it too, but, unfortunately, it still doesn't work properly...
I tried to launch Notepad.exe...

I don't know why it doesn't work... The window appears in the left-bottom side ( outside the screen ) of the screen...
This is the code:
 

#include <MsgBoxConstants.au3>
#include <AutoItConstants.au3>

Local $sFileConfigurazione = @ScriptDir & "\configurazione_exe.ini"

Local $aWinList

If(FileExists($sFileConfigurazione)) Then
    Local $aSezioneIni = IniReadSection($sFileConfigurazione, "CONFIGURAZIONE_EXE")
    If @error Then
        MsgBox($MB_ICONERROR, "Errore!", "Errore durante l'apertura del file: " & @CRLF & $sFileConfigurazione & @CRLF & "Errore: " & @error)
    Else
        ; Lancio dell'applicativo indicato nel file di configurazione
        Local $iPID = ShellExecute($aSezioneIni[1][1])
        Local $hWnd = 9999 ; Placeholder for success
        Do
            $aWinList = WinList()
            For $i = 1 To $aWinList[0][0]
                If WinGetProcess($aWinList[$i][1] = $iPID) And BitAND(WinGetState($aWinList[$i][1]), 2) Then
                    $hWnd = $aWinList[$i][1]
                    ExitLoop
                EndIf
            Next
            Sleep(10) ; Save CPU
        Until $hWnd <> 9999

        Select
            Case $aSezioneIni[2][1] = "MIN"
                WinSetState($hWnd, "", @SW_MINIMIZE)
            Case $aSezioneIni[2][1] = "MAX"
                WinSetState($hWnd, WinGetTitle($hWnd), @SW_MAXIMIZE)
            Case $aSezioneIni[2][1] = "TOP"
                WinSetOnTop($hWnd, WinGetTitle($hWnd), $WINDOWS_ONTOP)
        EndSelect
    EndIf
EndIf

If anyone would help me, I'd be very happy :)
Thanks again and sorry for my requests...

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites
  • Moderators

FrancescoDiMuro,

Quote

I applied it too, but, unfortunately, it still doesn't work properly...

That is because you have NOT applied it. You still have:

If WinGetProcess($aWinList[$i][1] = $iPID)

when what you should have is:

If WinGetProcess($aWinList[$i][1]) = $iPID

which is exactly the same error as I corrected above.

Quote

If anyone would help me, I'd be very happy

If you actually read the help you were given, so would we.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

@Melba23
I'm so sorry for not noticing that little change!
I wasn''t payin' enough attention at the code... Sorry for that!

Now it works like a charm :)
Thank you for your time and your patience, and have a wonderful day :)

Francesco 

Edited by FrancescoDiMuro

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
    • By CYBRIX
      So I am a person who has learned programming off the internet, without structured courses, and I'm trying to create a UI element that can be used like "GUICtrlCreate...".

      I'd like to get some kind of insight on how to improve the code of a Graph element that I have created.
      I am unfamiliar on the standards for creating such UI elements, and assume I'll get some valuable insight here.
       
      Here's some sample code: (I tried to make it look a bit less upsetting to those who know better, but be warned: not pretty.)
      #include <WinAPISys.au3> #include <WinAPI.au3> #include <WinAPIGdi.au3> #include <Array.au3> #include <WindowsConstants.au3> #include <GUIConstants.au3> Local $hWnd = GUICreate("Test", 200, 200) GUISetState(@SW_SHOW, $hWnd) Local $hGraph = _GraphStartUp($hWnd, 10, 30, 180, 180) Local $nData, $nDataMax = 1000, $hDataTimer = TimerInit() While GUIGetMsg() <> $GUI_EVENT_ClOSE If TimerDiff($hDataTimer) >= 150 Then $nData = Random(0, $nDataMax) _UpdateGraph($nData) $hDataTimer = TimerInit() EndIf Sleep(20) WEnd _GraphShutDown($hWnd, $hGraph) Exit Func _GraphStartUp($hWnd, $x, $y, $w, $h, $nUpdateTimes = 1000, $nResolution = 60) Global $hBluePen = _WinAPI_CreatePen($PS_SOLID, 2, _WinAPI_RGB(220, 0, 0)) Global $hGreyPen = _WinAPI_CreatePen($PS_DASH, 1, _WinAPI_RGB(100, 100, 100)) Global $hBlackPen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(0, 0, 0)) Global $hWhitePen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(255, 255, 255)) Global $nGraphRes = $nResolution Global $aGraphData[$nGraphRes + 1] For $i = 2 To $nGraphRes $aGraphData[$i] = 0 Next Global $hWinDC = _WinAPI_GetWindowDC($hWnd) Global $nGraphX = $x Global $nGraphY = $y Global $nGraphWidth = $w Global $nGraphHeight = $h Global $nGraphXUnit = $nGraphWidth / ($nGraphRes - 1) Global $nGraphBottomY = $nGraphY + $nGraphHeight Global $nGraphMaxX = $nGraphX + $nGraphWidth Global $aUpdateArea[4][2] = [[$nGraphX - 1, $nGraphY - 1], [$nGraphX - 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphY - 1]] Global $pUpdateAreaRgn = _WinAPI_CreatePolygonRgn($aUpdateArea) Global $pTextRect = _WinAPI_CreateRectEx($nGraphX + 1, $nGraphY + 1, $nGraphWidth / 2, $nGraphHeight / 4) Global $nGreatestValue = 1 GLobal $pGraphArea = _WinAPI_CreateRectEx($nGraphX - 7, $nGraphY - 26, $nGraphWidth + 14, $nGraphHeight + 2) Global $pDrawCall = DllCallbackRegister('_DrawGraph', 'none', '') Global $pGraphTimer = _WinAPI_SetTimer($hWnd, 567891234, $nUpdateTimes, DllCallbackGetPtr($pDrawCall)) _DrawGraph() Return $pGraphTimer EndFunc Func _DrawGraph() Global $hPen $nGreatestValue = _ArrayMax($aGraphData, 1, 1) $hPen = _WinAPI_SelectObject($hWinDC, $hWhitePen) _WinAPI_PaintRgn($hWinDC, $pUpdateAreaRgn) $hPen = _WinAPI_SelectObject($hWinDC, $hGreyPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphMaxX, $nGraphY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY + ($nGraphHeight / 2), $nGraphMaxX, $nGraphY + ($nGraphHeight / 2)) _WinAPI_DrawLine($hWinDC, $nGraphMaxX, $nGraphY, $nGraphMaxX, $nGraphBottomY) $hPen = _WinAPI_SelectObject($hWinDC, $hBluePen) For $i = 1 To $nGraphRes - 1 _WinAPI_DrawLine($hWinDC, $nGraphX + (($i - 1) * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i] / $nGreatestValue * $nGraphHeight), $nGraphX + ($i * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i + 1] / $nGreatestValue * $nGraphHeight)) Next $hPen = _WinAPI_SelectObject($hWinDC, $hBlackPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphBottomY, $nGraphMaxX, $nGraphBottomY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphX, $nGraphBottomY) _WinAPI_DrawText($hWinDC, Round($aGraphData[$nGraphRes], 2), $pTextRect, $DT_LEFT) EndFunc Func _UpdateGraph($nData) _ArrayAdd($aGraphData, $nData) _ArrayDelete($aGraphData, 1) EndFunc Func _GraphShutDown($hWnd, $pGraphTimer) _WinAPI_SelectObject($hWinDC, $hPen) _WinAPI_DeleteObject($hBlackPen) _WinAPI_DeleteObject($hGreyPen) _WinAPI_DeleteObject($hBluePen) _WinAPI_DeleteObject($hWhitePen) _WinAPI_ReleaseDC($hWnd, $hWinDC) _WinAPI_KillTimer($hWnd, $pGraphTimer) DllCallbackFree($pDrawCall) _WinAPI_RedrawWindow($hWnd, $pGraphArea) EndFunc  
    • By mLipok
      I check this snippet:
      https://www.autoitscript.com/wiki/Snippets_(_GUI_)#GUI_With_Scrollable_TabItem
      Modified them and I refactored. That's because I needed to adapt it to my needs (I'll write later).
      I thought I understood how it works.
      But I was wrong.
       
      This is my example which is showing what I want to achieve.
      #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <GuiScrollBars.au3> #include <GUIScrollbars_Ex.au3> #include <StringConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> GUIRegisterMsg($WM_VSCROLL, WM_VSCROLL) _Example() Func _Example() Local $i_Count = 30 Local $a_Options_List[$i_Count + 1] $a_Options_List[0] = $i_Count For $i = 1 To $i_Count $a_Options_List[$i] = 'Test #' & $i Next ConsoleWrite("- " & _my_gui_Wybierz('Testing', $a_Options_List) & @CRLF) EndFunc ;==>_Example Func _my_gui_Wybierz($s_Description, $a_Options_List = "", $i_Left = Default, $i_Top = Default, $i_Width = Default, $hWnd_Parent = 0) ;~ WinSetOnTop($ACROBAT_TITLE, "", $WINDOWS_NOONTOP ) If $i_Left = Default Then $i_Left = -1 If $i_Top = Default Then $i_Top = -1 If $i_Width = Default Then $i_Width = 400 #Region _my_gui_Wybierz - GUI Creation Local $i_Height = 600 Local $hWND_DateForm = GUICreate("", $i_Width, $i_Height, $i_Left, $i_Top, BitOR(0, $WS_SIZEBOX), -1, $hWnd_Parent) WinSetOnTop($hWND_DateForm, "", $WINDOWS_ONTOP) Local $hChild = GUICreate("Scroll area", $i_Width - 15, $i_Height - 40, 0, 0, $WS_POPUP, $WS_EX_MDICHILD, $hWND_DateForm) _GUIScrollBars_Init($hChild, -1) _GUIScrollBars_ShowScrollBar($hChild, $SB_HORZ, False) _GUIScrollBars_ShowScrollBar($hChild, $SB_VERT, True) ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) GUICtrlCreateLabel("", 10, 7, $i_Width - 45, 80) Local $id_Label1 = GUICtrlCreateLabel("", 10, 7 + 5, $i_Width - 45, 80 - 5) GUICtrlSetBkColor(-1, 0x88AABB) Local $a_List_of_Button_ID[$a_Options_List[0] + 1] For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 0 And $IDX_Item < 10 Then $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ $IDX_Item & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) Else $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ Chr(Asc('A') + $IDX_Item - 10) & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) EndIf Next Local $temp_var = $a_Options_List[0] Local $a_accelerators[($temp_var * 2) + 1][2] Local $i_Accelerators_Counter = 0 Local $i_Accelerator_Char1 = '' Local $i_Accelerator_Char2 = '' For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 9 Then $i_Accelerator_Char1 = Chr(Asc('A') + $IDX_Item - 10) $i_Accelerator_Char2 = Chr(Asc('a') + $IDX_Item - 10) Else $i_Accelerator_Char1 = "{NUMPAD" & $IDX_Item & "}" ;Chr(48 + $IDX_Item) $i_Accelerator_Char2 = $IDX_Item EndIf $a_accelerators[($IDX_Item * 2) - 1][0] = $i_Accelerator_Char1 $a_accelerators[($IDX_Item * 2) - 1][1] = $a_List_of_Button_ID[$IDX_Item] $a_accelerators[($IDX_Item * 2) - 1 + 1][0] = $i_Accelerator_Char2 $a_accelerators[($IDX_Item * 2) - 1 + 1][1] = $a_List_of_Button_ID[$IDX_Item] $i_Accelerators_Counter += 2 Next $a_accelerators[0][0] = $i_Accelerators_Counter GUISetAccelerators($a_accelerators, $hChild) GUICtrlSetData($id_Label1, $s_Description) GUISetState(@SW_SHOW, $hWND_DateForm) GUISetState(@SW_SHOW, $hChild) #EndRegion _my_gui_Wybierz - GUI Creation #Region - _my_gui_Wybierz - Handling messages Local $i_Selected_item = 0 Local $v_Return_Value = "" Local $a_GUI_Messages While 1 $a_GUI_Messages = GUIGetMsg($GUI_EVENT_ARRAY) If $a_GUI_Messages[0] = $GUI_EVENT_NONE Then ; do nothing ElseIf $a_GUI_Messages[1] = $hWND_DateForm Then If $a_GUI_Messages[0] = $GUI_EVENT_CLOSE Then ExitLoop ElseIf $a_GUI_Messages[1] <> $hChild Then ; .... Else For $IDX_Check = 1 To $a_Options_List[0] If $a_List_of_Button_ID[$IDX_Check] = $a_GUI_Messages[0] Then $v_Return_Value = GUICtrlRead($a_List_of_Button_ID[$IDX_Check]) $i_Selected_item = $IDX_Check $v_Return_Value = _RegExpFirstMatch($v_Return_Value, '.+?\. (.+)') ExitLoop 2 ; exit from ForNext and also from WhileWend EndIf Next EndIf WEnd #EndRegion - _my_gui_Wybierz - Handling messages GUIDelete($hChild) GUIDelete($hWND_DateForm) Return SetError(0, $i_Selected_item, $v_Return_Value) EndFunc ;==>_my_gui_Wybierz Func WM_VSCROLL($hWnd, $msg, $wParam, $lParam) #forceref $msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ; Set the position and then retrieve it. Due to adjustments ; by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Func _RegExpFirstMatch($s_Data, $s_Pattern) Local $a_Results = StringRegExp($s_Data, $s_Pattern, $STR_REGEXPARRAYGLOBALMATCH) If @error Then Return SetError(@error, @extended, '') Return SetError(0, UBound($a_Results), $a_Results[0]) EndFunc ;==>_RegExpFirstMatch  
      I have few problems with this code, and many question related to them.
      Question 1:
      How to make the Scrollbars to work ?
      I mean to scroll buttons.
      Question 2:
      Do I must to ues Child Window, or is it possible to scroll buttons without using Child Window ?
      Question 3:
      Why after uncommenting this following line:
      ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) the ScrollBar disapears ?
    • By Mo0C0w
      Hey guys!
      I just started working with the GUI yesterday and it has only brought more fun to the Autoit adventure  
      Basically I have a GUI windows that opens and based on the selection of the combo box the button will do something different. This specific scenario I am talking about the Client Update Verification  combo selection. When selected and the button is pressed my second gui window opens. As of now if I only paste comp1 or comp2 by itself it works correctly, but if I paste both, it has a fit.
      What would the correct way to do this be? Any help or examples, would be greatly appreciated! Thank you in advance
       
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Client_List.au3> #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiibox v4.kxf Global $Form1_1 = GUICreate("Plexii", 336, 419, 1548, 586) GUISetBkColor(0xFFFFFF) Global $Pic1 = GUICtrlCreatePic("C:\Users\dnoble\Pictures\plexii.jpg", 41, 0, 252, 268, BitOR($GUI_SS_DEFAULT_PIC,$SS_CENTERIMAGE)) Global $Label2 = GUICtrlCreateLabel("Select Test", 125, 280, 95, 24) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $Combo2 = GUICtrlCreateCombo("Select Test", 39, 312, 257, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "Client Update Verification|Bids") GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") Global $Button1 = GUICtrlCreateButton("Proceed", 111, 352, 129, 33) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Combo2) = "Client Update Verification" Then _Form2() ;clientupdateverification() EndSwitch WEnd Func _Form2() #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiiboxclientupdate verification.kxf $Form1_1 = GUICreate("Plexii", 336, 521, 866, 454) GUISetBkColor(0xFFFFFF) $Edit1 = GUICtrlCreateEdit("", 57, 72, 241, 345) GUICtrlSetData(-1, "Edit1") $Button1 = GUICtrlCreateButton("Execute", 95, 440, 145, 41) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Edit1) = "comp1" Then comp1() If GUICtrlRead($Edit1) = "comp2" Then comp2() EndSwitch WEnd EndFunc  

    • By XGamerGuide
      I'm trying to assign a faint text in the background to an input field that disappears after the input has started. This should have a certain color such as gray.
×
×
  • Create New...