Jump to content
  1. SkysLastChance

    SkysLastChance

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By odaylton
      Text translated from Portuguese by google - please apologize for any errors
       
      First I have to thank the development team for product quality and the ease with which it is possible to develop tools with AutoIt.
       
      I am developing a series of libraries to facilitate the creation of Forms that once it is stable and comprehensive I intend to share here for autoit
      But suddenly during development an unexpected effect appeared in simple inputbox fields.
       
      Everything is working fine, however if I'm in an inputbox, don't change its selected content and move focus to another field the selected text remains blue (selected) instead of returning to normal
      See the image....

      When pricing 3x TABs all remain blue
       
      However if I change the field , when leaving its focus it behaves normally
      See the ex below:

      1) I selected “tipo Default” and pressed TAB (to test what happens)
      2) typed "TESTE" and pressed TAB
      3) I pressed TAB 2x again and the "Centralizado" field turned blue
      Note: by default, when receiving focus, the text is always automatically selected
       
      Here are some parts of the code:
      Gui  create:
      ;modifique o tamanho inicial aqui ;$Form[$Form[0][0]][1] = 600 ;largura =800 ;$Form[$Form[0][0]][2] = 600 ;Atura =600 ;$Form[$Form[0][0]][3] = "RoboAutomato - "&$NomeProjeto $Form[$Form[0][0]][0] = GUICreate($Form[$Form[0][0]][3], _ $Form[$Form[0][0]][1], $Form[$Form[0][0]][2], _ Default, Default, _ BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP, $WS_POPUP)) GUISetFont($FormFonteTam, _ ;Tamanho da Fonte $FormFonteTipo, _ ;Tipo da Fonte $FormFonteEstilo, _ ;Estilo da Fonte $FormFonteNome) ; Nome da Fonte #Region Criando ToolTip $hGUIToolTip = _GUIToolTip_Create($Form[$Form[0][0]][0], BitOR($_TT_ghTTDefaultStyle, $TTS_BALLOON)) ; balloon style tooltip #EndRegion Criando ToolTip  inputs create:
      .... InputCriar(200, 200, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Referencia|", _ ;Label do Input "Tudo Default ou qq diferente de 1,2,3,4: mais simples", _ ;Texto explicativo do InputBox e seu label "Teste do tipo Default", _ ;Valor Default da Input Default, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte InputCriar(200, Default, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Canto inferior esquerdo|", _ ;Label do Input "Tipo 1: 2 linhas", _ ;Texto explicativo do InputBox e seu label "Tipo 1: 2 linhas", _ ;Valor Default da Input 1, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte ..... Function InputCriar:
      Func InputCriar($InputX = Default, $InputY = Default, _ ;Coordenadas Base Canto Superior Esquerdo se não definido proxima linha e coluna $InputWidth = Default, $InputHeight = Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela $InputRotulo = "", _ ;Label do Inpu $InputTip = "", _ ;Texto explicativo do InputBox e seu label $InputDefault = "", _ ;Valor Default da Input $InputAlin = Default, _ ;0 é Defaultou define o estilo $InputMascara = Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" $InputEstilo = Default, _ $InputEstiloEx = Default, _ $InputResizing = Default, _ ; Tipo de alinhamento em relação a Janela $InputTamFonte = Default, _ ;Tamanho da Fonte $InputFonteTipo = Default, _ ;Tipo da Fonte $InputFonteEstilo = Default, _ ;Estilo da Fonte $InputFonteNome = Default) ; Nome da Fonte .... $InputEstilo = BitOR($ES_AUTOHSCROLL, _ $WS_TABSTOP) ... $InputEstiloEx = $WS_EX_CLIENTEDGE ;formato baixo relevo ... $Inputs[$Inputs[0][0]][0] = GUICtrlCreateInput($Mascara5, _ ;Default da Input $Form[$Form[0][0]][6]+$InputX, $Form[$Form[0][0]][7]+$InputY, _ ;Coordenadas Base $InputWidth, $InputHeight, _ ;Altura e largura automatica $InputEstilo, _ ;Estilo $InputEstiloEx) ;Extilo extra ... GUICtrlSetData($Inputs[$Inputs[0][0]][0], $Inputs[$Inputs[0][0]][3]) Return $Inputs[$Inputs[0][0]][0] EndFunc ;==>InputCriar sorry for not putting all the code because there are many libraries and they are in the initial stage of development
       
      What should I change to get Inputbox's behavior back to normal????
      Thank you for your attention
    • By nooneclose
      Why can I not click on either of my input fields?
      #Region ### START Koda GUI section ### Form= Global $Form1 = GUICreate("Form1", 730, 437, 192, 124) ;GUISetFont(14, 800, 0, "MS Sans Serif") GUISetBkColor(0xC0DCC0) Global $Label1 = GUICtrlCreateLabel("Enter your Password. UserName is auto filled", 62, 40, 604, 41, $SS_CENTER) GUICtrlSetFont(-1, 26, 800, 0, "MS Sans Serif") Global $Label2 = GUICtrlCreateLabel("User Name:", 120, 130, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Label3 = GUICtrlCreateLabel("Password:", 135, 210, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Input1 = GUICtrlCreateInput(@UserName, 274, 130, 185, 32) GUICtrlSetFont(-1, 14, 800, 1, "MS Sans Serif") Global $Input2 = GUICtrlCreateInput("Password", 274, 210, 185, 32, $ES_PASSWORD) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") Global $OK = GUICtrlCreateButton("OK", 274, 270, 185, 57) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $OK Global $UserName = GUICtrlRead($Input1) Global $PassWord = GUICtrlRead($Input2) ExitLoop EndSwitch WEnd ; Delete the GUI window GUIDelete()  
    • By Jamestay97
      Hello! Thanks you for looking at my post
      **No source code I'm sorry work related can't copy information**
      I've been using autoit for about 1 year. 
      I'm having trouble automating a click on an internet explorer web page and I've tried a lot of examples from help pages and forums already. The object I'm trying to click on isnt always in the same spot so I can't use mouse click or control click, I have tried to use the different get collection options and clickbyname, or index or get object. I'm just struggling. 
      Description of object I'm trying to click -- 
      HTML Code looks like <a ng-click.. "Click Here" it appears it's just a click able object named "click here" that opens a hidden window by running a script inside the web page. I'm not able to grab the information from the window unless it's open so I have to automate this click somehow. 
       
      I understand it's difficult to assist without having something to look at, I apologize for that sincerely and appreciate and assistance and suggestions. 
    • By kingjacob90
      Hi
      So I am trying to click the green button, this button is not always in the same place. So fare I am trying to click it by finding the color but there is also something else with the same color on the screen (circled in yellow) that is causing issues. Is there a way to use the Title and Class of the window (can't be just the window as there are more than one with the same name).
      How does AutoIt Info get this information?

    • By matwachich
      Hi AutoIters!
      Here is my new UDF about GUIs: it's an enhanced mixture of Advanced InputBox (deprecated) and KODA Parser (deprecated), with additional functions.
      What you can do with it:
      Parse KODA files and directly create GUIs (_GUIUtils_CreateFromKODA) Parse a simple JSON form definition to simply create advanced InputBoxes with any amount/type of input controls (_GUIUtils_CreateFromJSON) Created GUIs are returned as Scripting.Dictionary objects, and you have helper functions to access GUIs controls by their names (_GUIUtils_HWnd, _GUIUtils_CtrlID, _GUIUtils_HCtrl ...) A function that can make a GUI created from KODA/JSON (defined by it's $oForm object) and make it a modal InputDialogBox (just like InputBox, but returns all entered data as Scripting.Dictionary object) Functions are documented, and there are some examples.
      Consider this UDF as beta, but since I'm currently using it in a small commercial project, it should become production ready in near future.
      To always get the latest code version, get it from Github (more up to date than this topic).
      Update 04/02/2020:
      New simple application example Fixed focused control handling in _GUIUtils_InputDialog Reset input values before returning from _GUIUtils_InputDialog Fixed CloseOnEsc in _GUIUtils_InputDialog Fixed Input not reset Fixed all ListBox items are selected Project now on GitHub https://github.com/matwachich/autoit-guiutils/
      Update 05/02/2020:
      Support for nodate for Date and Time input controls (pass null value) New handling of focused control _GUIUtils_InputDialog: Now, you can specify the focused control in $oInitialData by setting "controlName:focus" = True Updated documentation of _GUIUtils_InputDialog Update 07/02/2020:
      Bug corrected when setting Data input control Added: abillity to read a single input control New functions (_GUIUtils_GetInputs, _GUIUtils_WriteInputs), documentation completion. Readme file and screenshots on Github Page  
      GUIUtils.zip
×
×
  • Create New...