Jump to content
Skyrimfus

GUI overlaping

Recommended Posts

Skyrimfus

Is it possible for the graphic to be on top?

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ###
$Form1_1_1 = GUICreate("Form1", 804, 604, 192, 124)
$Pic1 = GUICtrlCreatePic("car2.jpg", 656, 4, 118, 237)
$Graphic1 = GUICtrlCreateGraphic(592, 4, 118, 237)
GUICtrlSetGraphic(-1, $GUI_GR_COLOR, 0x000000, 0xFF0000)
GUICtrlSetGraphic(-1, $GUI_GR_RECT, 2, 12, 34, 38)
GUICtrlSetGraphic(-1, $GUI_GR_RECT, 54, 12, 34, 38)
GUICtrlSetGraphic(-1, $GUI_GR_RECT, 17, 77, 34, 38)
GUICtrlSetGraphic(-1, $GUI_GR_RECT, 72, 70, 34, 38)

GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd
Spoiler

c6acc83565b3d21fbfeaec2894e09c5c.png

Now the car is on top of the squares, I can't get the squares to get on top of the car.

Share this post


Link to post
Share on other sites
Jos

You're not being very clear on your question as there is none.
So you want to get a square on top of the Car image? MAybe create a new Graphics control for that one as you are now playing with only one control?

Quote

 

Due to design constraints RECT, ELLIPSE and PIE graphics are drawn first. For example, a LINE will always be drawn over a RECT. If the drawing order is important to the look of the graphic, then it is recommended that multiple graphic controls be used instead of using a single control to do all the drawing.
 

Jos

 

Edited by Jos

Visit the SciTE4AutoIt3 Download page for the latest versions  - Beta files                                How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Skyrimfus

I would like the result to be like this(this was drawn in paint):

Spoiler

ex.jpg

 

Share this post


Link to post
Share on other sites
Skyrimfus

Sorry, didn't see the quote untill i refreshed. I'll try it now.

Share this post


Link to post
Share on other sites
Skyrimfus

Could I please get an example? I don't know why, but I can't get it to work...

Share this post


Link to post
Share on other sites
Skyrimfus

Well I decided to use a label and it works:

 

 

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ###
$Form1_1_1 = GUICreate("Form1", 804, 604, 192, 124)
$Pic1 = GUICtrlCreatePic("car2.jpg", 656, 4, 118, 237)
$Label1 = GUICtrlCreateLabel("H", 648, 32, 44, 49)
GUICtrlSetColor(-1, 0xFF0000)
GUICtrlSetBkColor(-1, 0xFF0000)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening everyone
      First, I want to apologize with you for the title not very clear, but I thought a little bit on which title to set at the thread, and this is the one that came in mind.
      Now, let me explain what I'm trying to understand.

      I am making an application ( with n clients ), with an SQLite Database, which has a Main form, and n sub-forms... 
      Since these sub-forms are called several times, because they are used to add or update records to the Database, I put the code that generates the GUI of these sub-forms in Functions.
      There are two sub-forms which are "treated" as two main forms, since even them have n sub-forms, which perform various tasks.
      Where am I stucked?

      For the Main form I created a Status Bar, in order to display messages ( add/delete/update/search results ), and it works perfectly with all the forms which don't have other sub-forms.
      For the two forms, which indeed have n sub-forms, I created two separated Status Bars, which are (re)created everytime I call the function that then displays the form.
      Practically, I can't set icons to these two Status Bars, and I don't know why.
      I'm really sorry that I don't feel clear enough, so, here you are an example of what I am saying.
      I recreated exactly what my script does:
      #include <GuiButton.au3> #include <GUIConstantsEx.au3> #include <GuiStatusBar.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) Global $frmSubForm, _ $txtSubFormField, _ $sbSubFormStatusBar, _ $objSB_IconError = _WinAPI_LoadShell32Icon(109), _ $objSB_IconInformation = _WinAPI_LoadShell32Icon(277) #Region ### START Koda GUI section ### Form= $frmMainForm = GUICreate("Main Form", 300, 300, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "ExitApplication") $sbMainStatusBar = _GUICtrlStatusBar_Create($frmMainForm) $btnCreateSubForm = GUICtrlCreateButton("Create Sub Form", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "GenerateSubForm") GUICtrlSetFont(-1, 10, 400, 0, "Arial") _GUICtrlStatusBar_SetSimple($sbMainStatusBar) _GUICtrlStatusBar_SetText($sbMainStatusBar, "") GUISetState(@SW_SHOW, $frmMainForm) #EndRegion ### END Koda GUI section ### While 1 Sleep(100) WEnd Func ExitApplication() Exit EndFunc Func GenerateSubForm() #Region ### START Koda GUI section ### Form= $frmSubForm = GUICreate("Sub-Form", 300, 300, -1, -1, -1, -1, $frmMainForm) GUISetOnEvent($GUI_EVENT_CLOSE, "DeleteSubForm") $txtSubFormField = GUICtrlCreateInput("", 0, 0, 100, 20) $btnCheckSubFormField = GUICtrlCreateButton("Check Field", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "CheckSubFormField") GUICtrlSetFont(-1, 10, 400, 0, "Arial") $sbSubFormStatusBar = _GUICtrlStatusBar_Create($frmSubForm) _GUICtrlStatusBar_SetSimple($sbSubFormStatusBar) _GUICtrlStatusBar_SetText($sbSubFormStatusBar, "") GUISetState(@SW_SHOW, $frmSubForm) GUISetState(@SW_DISABLE, $frmMainForm) #EndRegion ### END Koda GUI section ### EndFunc Func DeleteSubForm() ; Declared Globally => $frmSubForm GUIDelete($frmSubForm) GUISetState(@SW_ENABLE, $frmMainForm) EndFunc Func WriteToStatusBar($sbStatusBar, $objSB_Icon, $strText) _GUICtrlStatusBar_SetIcon($sbStatusBar, 0, $objSB_Icon) _GUICtrlStatusBar_SetText($sbStatusBar, $strText) ConsoleWrite("Icon Handle: " & $objSB_Icon & @CRLF) EndFunc Func CheckSubFormField() ; Declared Globally => $txtSubFormField If GUICtrlRead($txtSubFormField) = "" Then ; Declared Globally => $sbStatusBar WriteToStatusBar($sbSubFormStatusBar, $objSB_IconError, "Field NOK.") Else WriteToStatusBar($sbSubFormStatusBar, $objSB_IconInformation, "Field OK.") EndIf EndFunc The text is set, but icon is not.
      Could someone please tell me why?
      Thanks everyone in advance  

      Best Regards.
    • Reziskonh
      By Reziskonh
      Hi, everybody
      I look for GUI whose behavior similar to the message of an email client or antivirus
      In other words:
          Any PC screen able to calculate the size
          To consider the Task bar size
          To find the lower corner on the right/below and to nestle on it

      Notes:
      In GUI the GUICtrlCreateEdit field (as option) - that can be received and displayed through variable information
      Thanks a lot
      PS
      I use the translator, excuse if something is not clear
       

    • VollachR
      By VollachR
      Hi,
      I'd like to show a progress bar for an operation performed by an external program my script is running silently, I want to show it in a GUI I created using the GUICtrlCreateProgress but I have no idea how to do it.
      The important thing to point out is that there's no way of knowing how long the external program will run, as it is a file splitter and it depends on the size of file it splits and the split parts size.
      Can someone point me in the right direction or give me an example how to do so?
      This is my RunWait command:
      RunWait($MYFILES1 & '\fsplit.exe -split ' & $Size & ' mb ' & $File & " -f " & $File & "." & $extension) It uses multiple variables declared and set earlier in the script, how will I got about having the progress of that command shown using GUICtrlCreateProgress ? Is it possible?
      Thank you.
    • nacerbaaziz
      By nacerbaaziz
      Hello my friends
      I have an inquiry and I hope to find the answer here
      I want to create a graphical user interface
      but I want to hide the system menu
      I mean the window menu
      Is this possible?
      If is possible please give me how to do that
      Thanks in advance
    • helmar
      By helmar
      I was playing around with simple GUI creation.  I tend to like parameter driven coding (in prior life (years ago) as Clipper/FoxPro/dBase coder).  Just wanted to see what I could do with a GUI.
      #Region options, includes Opt('MustDeclareVars', 1) Opt("GUIOnEventMode", 1) ; Change to OnEvent mode #include <GUIConstantsEx.au3> #EndRegion options, includes Global Const $nCols = 2, $nRows = 6, $nSpacer = 10, $nBtnWidth = 150, $nBtnHeight = 30 Global $xName = 0, $xID = 0 Global $nGUIWidth = ($nCols * $nBtnWidth) + (($nCols + 1) * $nSpacer) Global $nGUIHeight = ($nRows * $nBtnHeight) + (($nRows + 1) * $nSpacer) Global $hMainGUI = GUICreate("Calculated GUI", $nGUIWidth, $nGUIHeight, -1, -1) For $xRows = 1 to $nRows ;in this arrangement, tabbing is left to right, then next row For $xCols = 1 to $nCols ;reverse the order of this line with the prior line for top to bottom tabbing, then next col $xName += 1 $xID += 1 Global $Dummy = GUICtrlCreateButton("Button" & $xName, _ ($nBtnWidth * ($xCols - 1)) + (($xCols - 1) * $nSpacer) + $nSpacer, _ ($nBtnHeight* ($xRows - 1)) + (($xRows - 1) * $nSpacer) + $nSpacer, _ $nBtnWidth, _ $nBtnHeight) GUICtrlSetOnEvent($xID+2, "Handler") Next Next GUISetOnEvent($GUI_EVENT_CLOSE, "CloseApp") GUISetState(@SW_SHOW) While 1 Sleep(10) WEnd Func CloseApp() Exit EndFunc Func Handler() MsgBox(0,0,"Button " & @GUI_CtrlId - 2) EndFunc  
×