Jump to content
dreivilo47

[Solved] Function _IECreate doesn't work in Windows 10

Recommended Posts

dreivilo47

When I want to test Example 1 of Function _IECreate (AutoIt Help File), I see that function _IECreate doesn't work in Windows 10.
Syntax Check (Ctrl+F5) gives no errors.

 

Example 1:

; Create a browser window and navigate to a website
#include <IE.au3>
Local $oIE = _IECreate("www.autoitscript.com")

 

The error I receive with F5 (Tools, Go) in SciTE:

1.jpg

Edited by dreivilo47
Problem solved

Share this post


Link to post
Share on other sites
dreivilo47

Using Global instead of Local will not solve this problem.

Share this post


Link to post
Share on other sites
Danp2

This command works fine in Windows 10, so the issue is local to your install. Post the output of this --

#include <MsgBoxConstants.au3>

Global $iEventError = 0 ; To be checked to know if COM error occurs. Must be reset after handling.

Local $oMyError = ObjEvent("AutoIt.Error", "ErrFunc") ; Install a custom error handler

Local $oObject = ObjCreate("InternetExplorer.Application")

ConsoleWrite('@error = ' & @error & @CRLF)

; This is a custom error handler
Func ErrFunc()
    $sHexNumber = Hex($oMyError.number, 8)
    MsgBox($MB_OK, "", "We intercepted a COM Error !" & @CRLF & _
            "Number is: " & $sHexNumber & @CRLF & _
            "WinDescription is: " & $oMyError.windescription)
    $iEventError = 1 ; Use to check when a COM Error occurs
EndFunc   ;==>ErrFunc

 

  • Like 1

Share this post


Link to post
Share on other sites
dreivilo47

Thank you for your script @Danp2.

Edited by dreivilo47

Share this post


Link to post
Share on other sites
dreivilo47

The text "Klasse is niet geregistreerd" is Dutch and means "Class not registered".

 

My output:

1.jpg

Share this post


Link to post
Share on other sites
Wanarmal

Try to run SciTE.exe with administrator.

I'm using Windowss 10 but no problem this function.

Share this post


Link to post
Share on other sites
dreivilo47
3 hours ago, Wanarmal said:

Try to run SciTE.exe with administrator.

I'm using Windowss 10 but no problem this function.

@Wanarmal, running SciTE as Administrator is not solving my problem.

Share this post


Link to post
Share on other sites
dreivilo47
1 hour ago, Danp2 said:

Anything else unusual about your setup? Running on a corporate network? Using SandBoxie? Etc.

You may want to review this thread.

Yes, I'm using SandBoxie (version 5.18) @Danp2.

Share this post


Link to post
Share on other sites
dreivilo47

I upgraded SandBoxie 5.18 to 5.20, my problem is solved!
Thank you for your help @Danp2!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • PramodR
      By PramodR
      Hello,
      I have to execute below block of code in elevated previllage, as that particular wmic class will work only with admin previlage.
      i am getting out put when i launch autoit as administrator,  but i will not be able to launch autoit as admin in this particular case but my user have admin rights.
      is there any better way i can run those command as administrator.?
      tried below steps:
      i have tried #RequireAdmin but that creates a user prompt  Tried using Runas command but gives error as wrong username or password , stuck with that step.  
       
    • dwaynek
      By dwaynek
      traytip isn't working in windows 10. nothing happens when i use the Traytip command.
      here's a simple script i used:
      TrayTip("I'm a title", "I'm the message", 5) i tried changing the registry setting HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced ( which didn't have EnableBalloonTips) and creating a DWORD entry called EnableBalloonTips and setting it to 1 and logging off then back in. that did not resolve the problem.
      i'm running Windows 10 v1709 b16299.431
    • antonioj84
      By antonioj84
      Hi all to the forum guru and expert I am trying to  automate this. in the registry  I have the network profile name network 2 and network   I want to  change their  CATEGORY  to Private .  Can someone lead me in the right direction.
      Private is 1 and Public is 0
      #RequireAdmin Global $sHKLMRoot = @OSArch = "x64" ? "HKLM64" : "HKLM" RegWrite($sHKLMRoot &"\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\NewNetworks" ,'/v NetworkList /t REG_MULTI_SZ /d 00000000 /f') see  attached picture below
      Much appreaciate
       

    • PhoenixPRO
      By PhoenixPRO
      When I try to automate this install program I can not get any of the buttons to click with the "ControlClick" function or any mouse movement to move the mouse to the and click it.  My OS is Windows 10 64Bit.  I have tried both 32bit and 64bit installs of Autoit V3 to no avail.
      I could not even get the run command to start the program until I used the variation of the command below in the script.
      With the script below the install program starts but will not click the "Next" button no matter what I do.
      Any help will be greatly appreciated.
      Thanks in advance.
       
      #include <MsgBoxConstants.au3>
      Opt("MouseCoordMode", 0) ;1=absolute, 0=relative to active window, 2=client
      Local $Success
      Run(@ComSpec & " /c " & 'C:\PhoenixPro_Install\RDXUtil\RDX_Tools_setup.exe', "C:\PhoenixPro_Install\RDXUtil", @SW_HIDE )

      WinWait("RDX Tools 1.62 - InstallShield Wizard", "Welcome to the InstallShield Wizard for RDX Tools 1.62")
      WinActivate("RDX Tools 1.62 - InstallShield Wizard", "Welcome to the InstallShield Wizard for RDX Tools 1.62")
      ControlClick ("RDX Tools 1.62 - InstallShield Wizard", "Welcome to the InstallShield Wizard for RDX Tools 1.62", 1639, "left", 1) ;Next Button
    • TheWizEd
      By TheWizEd
      How do I work with 2D arrays.  I've tried this but get errors.
      Local $aTest[4][4] = [[1,2,3,4],[5,6,7,8],[9,10,11,12],[13,14,15,16]]
      ;$aTest[0][] = [10,11,12]  ; Error at []
      Local $sTest = ""
      For $i = 0 To UBound($aTest)-1
        Local $aExtract = _ArrayExtract($aTest,$i,$i)
        $sTest = $sTest & MyTest($aExtract)
      Next
      Func MyTest($aTemp)
        _ArrayDisplay($aTemp)
        ; Error at    v $aTemp
        Return String($aTemp[0]) & " - " & String($aTemp[1]) & " - " & String($aTemp[2]) & @CRLF
      EndFunc
       
       
×