Jump to content

Input cannot be selected

jantograaf
 Share

Recommended Posts

jantograaf Seeker

jantograaf

Posted
Posted

Hi all,

I'm trying to create input-fields on a tab which are filled with data on creation of the GUI. I have successfully done this for 6 input fields on a specific tab page. However, when I add three more, the three latest inputs are filled with data but cannot be selected or edited. 

The code for the creation of the inputfields: 

;SETTINGS-TAB
$TAB_SETTINGS = GUICtrlCreateTabItem("Settings")

   $FFSETTINGS_INTERFACE1_LABEL = GUICtrlCreateLabel("Interface 1",11,34,140)
   $FFSETTINGS_INTERFACE1_INPUT = GUICtrlCreateInput($Interface1,155,34,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_INTERFACE2_LABEL = GUICtrlCreateLabel("Interface 2",11,59,140)
   $FFSETTINGS_INTERFACE2_INPUT = GUICtrlCreateInput($Interface2,155,59,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_INTERFACE3_LABEL = GUICtrlCreateLabel("Interface 3",11,84,140)
   $FFSETTINGS_INTERFACE3_INPUT = GUICtrlCreateInput($Interface3,155,84,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_INTERFACE4_LABEL = GUICtrlCreateLabel("Interface 4",11,109,140)
   $FFSETTINGS_INTERFACE4_INPUT = GUICtrlCreateInput($Interface4,155,109,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_PANEL_LABEL = GUICtrlCreateLabel("Panel IP",11,144,140)
   $FFSETTINGS_PANEL_INPUT = GUICtrlCreateInput($PING_PANEL_IP,155,144,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_ROUTER_LABEL = GUICtrlCreateLabel("Router IP",11,169,140)
   $FFSETTINGS_ROUTER_INPUT = GUICtrlCreateInput($PING_ROUTER_IP,155,169,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_WIFIFUJI_LABEL = GUICtrlCreateLabel("Panelconnectie",11,204,284)
   $FFSETTINGS_WIFIFUJI_INPUT = GUICtrlCreateInput($WifiFUJIFILM,155,204,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_WIFIFREE1_LABEL = GUICtrlCreateLabel("Wifi-adapter 2",11,229,284)
   $FFSETTINGS_WIFIFREE1_INPUT = GUICtrlCreateInput($WifiFREE1,155,229,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_WIFIFREE2_LABEL = GUICtrlCreateLabel("Wifi-adapter 3",11,254,284)
   $FFSETTINGS_WIFIFREE2_INPUT = GUICtrlCreateInput($WifiFREE2,155,254,140)
   GUICtrlSetState(-1,64)
   
   $FFSETTINGS_SAVE_BUTTON = GUICtrlCreateButton("Save settings",11,300,284)
   GuiCtrlSetOnEvent($FFSETTINGS_SAVE_BUTTON, "SaveNaarIni")

The data used to fill the inputfields is retrieved from an .ini-file: 

;Laad data uit INI-file
Global $Interface1 = IniRead("VSOL.ini","Interface Settings","Interface1","Geen geselecteerd")
Global $Interface2 = IniRead("VSOL.ini","Interface Settings","Interface2","Geen geselecteerd")
Global $Interface3 = IniRead("VSOL.ini","Interface Settings","Interface3","Geen geselecteerd")
Global $Interface4 = IniRead("VSOL.ini","Interface Settings","Interface4","Geen geselecteerd")
Global $WifiFUJIFILM = IniRead ("VSOL.ini","Wireless Interfaces","WifiFUJIFILM","")
Global $WifiFREE1 = IniRead ("VSOL.ini","Wireless Interfaces","WifiAdapter2","")
Global $WifiFREE2 = IniRead ("VSOL.ini","Wireless Interfaces","WifiAdapter3","")
Global $PING_ROUTER_IP = IniRead ("VSOL.ini","Router Settings","IP","192.168.0.1")
Global $PING_PANEL_IP = IniRead ("VSOL.ini","Panel Settings","IP","192.168.0.100")

If anyone has a clue... Is there a max number of controls a GUI can show? Am I doing something wrong in creating the GUI? 

I look forward to hearing your thoughts on this. If I didn't give enough info, please do tell me so :)

 

Kind regards,

Jan

Link to comment
Share on other sites
water Universalist

water

Posted
Posted

There is a maximum limit for controls - but you are far from this limit.
Most of the time another control overlays your unresponsive control.

Do you call GUICtrlCreateTabItem with the empty parameter as last action before displaying the GUI?

Quote

It is important to close the tab structure by creating a final tabitem control with a null text - GUICtrlCreateTabItem("").

 

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to comment
Share on other sites
jantograaf Seeker

jantograaf

Posted
  • Author
Posted

I'm not sure I'm that far from the limit, I didn't include the full GUI creation code, wait... :)
But as you can see, I did close the tab structure in the correct way. Thanks for the tip though. 

;Teken de backend
#Region ### START Koda GUI section ### Form=D:\Programming\SVN\VSOL Backend\GUI\VSOL Backend.kxf
Opt("GUIOnEventMode", 1)
Local $VSOL_BACKEND = GUICreate("VSOL Backend v2.0", 309, 631, -1, -1)
GUISetOnEvent($GUI_EVENT_CLOSE, "VSOL_CLOSE")
GUISetIcon("C:\Users\jantograaf\Pictures\Knipsel.ico", -1)

;TAB-HOUDER
$VSOL_TABS = GUICtrlCreateTab(3, 2, 305, 628)

;NETWORK-TAB
$TAB_NETWORK = GUICtrlCreateTabItem("Network")

   ; Groep van de eerste interface
   $GROEP_INTERFACE1 = GUICtrlCreateGroup($Interface1, 11,34,289,110, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetFont($GROEP_INTERFACE1,8.5,$FW_BOLD,"")
   $GROEP_I1_NAME = GUICtrlCreateLabel("",15,50,200,15)
   GUICtrlSetFont($GROEP_I1_NAME,8.5,$FW_BOLD,"")
   $GROEP_I1_STATUS = GUICtrlCreateLabel("",15,65,200,15)
   $GROEP_I1_IP_SUBNET = GUICtrlCreateLabel("",15,80,240,15)
   $GROEP_I1_GATEWAY = GUICtrlCreateLabel("",15,95,200,15)
   $GROEP_I1_DNS = GUICtrlCreateLabel("",15,110,240,15)
   $GROEP_I1_DHCP = GUICtrlCreateLabel("",15,125,240,15)
   $GROEP_I1_DISABLE = GUICtrlCreateButton("OFF",268,43,30,30)
   GUICtrlSetState(-1,$GUI_DISABLE)
   GUICtrlSetOnEvent(-1,"_JANDisableInterface1")
   $GROEP_I1_ENABLE = GUICtrlCreateButton("ON",237,43,30,30)
   GUICtrlSetState(-1,$GUI_ENABLE)
   GUICtrlSetOnEvent(-1,"_JANEnableInterface1")

   ; Groep van de tweede interface
   $GROEP_INTERFACE2 = GUICtrlCreateGroup($Interface2, 11,146,289,110, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetFont($GROEP_INTERFACE2,8.5,$FW_BOLD,"")
   $GROEP_I2_NAME = GUICtrlCreateLabel("",15,162,200,15)
   GUICtrlSetFont($GROEP_I2_NAME,8.5,$FW_BOLD,"")
   $GROEP_I2_STATUS = GUICtrlCreateLabel("",15,177,200,15)
   $GROEP_I2_IP_SUBNET = GUICtrlCreateLabel("",15,192,240,15)
   $GROEP_I2_GATEWAY = GUICtrlCreateLabel("",15,207,200,15)
   $GROEP_I2_DNS = GUICtrlCreateLabel("",15,222,240,15)
   $GROEP_I2_DHCP = GUICtrlCreateLabel("",15,237,240,15)
   $GROEP_I2_DISABLE = GUICtrlCreateButton("OFF",268,155,30,30)
   GUICtrlSetState(-1,$GUI_DISABLE)
   GUICtrlSetOnEvent(-1,"_JANDisableInterface2")
   $GROEP_I2_ENABLE = GUICtrlCreateButton("ON",237,155,30,30)
   GUICtrlSetState(-1,$GUI_ENABLE)
   GUICtrlSetOnEvent(-1,"_JANEnableInterface2")

   ; Groep van de derde interface
   $GROEP_INTERFACE3 = GUICtrlCreateGroup($Interface3, 11,258,289,110, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetFont($GROEP_INTERFACE3,8.5,$FW_BOLD,"")
   $GROEP_I3_NAME = GUICtrlCreateLabel("",15,274,200,15)
   GUICtrlSetFont($GROEP_I3_NAME,8.5,$FW_BOLD,"")
   $GROEP_I3_STATUS = GUICtrlCreateLabel("",15,289,200,15)
   $GROEP_I3_IP_SUBNET = GUICtrlCreateLabel("",15,304,240,15)
   $GROEP_I3_GATEWAY = GUICtrlCreateLabel("",15,319,200,15)
   $GROEP_I3_DNS = GUICtrlCreateLabel("",15,334,240,15)
   $GROEP_I3_DHCP = GUICtrlCreateLabel("",15,349,240,15)
   $GROEP_I3_DISABLE = GUICtrlCreateButton("OFF",268,267,30,30)
   GUICtrlSetState(-1,$GUI_DISABLE)
   GUICtrlSetOnEvent(-1,"_JANDisableInterface3")
   $GROEP_I3_ENABLE = GUICtrlCreateButton("ON",237,267,30,30)
   GUICtrlSetState(-1,$GUI_ENABLE)
   GUICtrlSetOnEvent(-1,"_JANEnableInterface3")

   ; Groep van de vierde interface
   $GROEP_INTERFACE4 = GUICtrlCreateGroup($Interface4, 11,370,289,110, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetFont($GROEP_INTERFACE4,8.5,$FW_BOLD,"")
   $GROEP_I4_NAME = GUICtrlCreateLabel("",15,386,200,15)
   GUICtrlSetFont($GROEP_I4_NAME,8.5,$FW_BOLD,"")
   $GROEP_I4_STATUS = GUICtrlCreateLabel("",15,401,200,15)
   $GROEP_I4_IP_SUBNET = GUICtrlCreateLabel("",15,416,240,15)
   $GROEP_I4_GATEWAY = GUICtrlCreateLabel("",15,431,200,15)
   $GROEP_I4_DNS = GUICtrlCreateLabel("",15,446,240,15)
   $GROEP_I4_DHCP = GUICtrlCreateLabel("",15,461,240,15)
   $GROEP_I4_DISABLE = GUICtrlCreateButton("OFF",268,379,30,30)
   GUICtrlSetState(-1,$GUI_DISABLE)
   GUICtrlSetOnEvent(-1,"_JANDisableInterface4")
   $GROEP_I4_ENABLE = GUICtrlCreateButton("ON",237,379,30,30)
   GUICtrlSetState(-1,$GUI_ENABLE)
   GUICtrlSetOnEvent(-1,"_JANEnableInterface4")

   $BUTTON_STOP_ALL_INTERFACES = GUICtrlCreateButton("Stop All",11,525,289,30)
   GUICtrlSetFont(-1,11,$FW_BOLD,"")
   GUICtrlSetBkColor(-1,0xDA3C3C)
   GUICtrlSetOnEvent(-1,"_JANStopAllInterfaces")
   $BUTTON_START_ALL_INTERFACES = GUICtrlCreateButton("Start All",11,557,289,30)
   GUICtrlSetFont(-1,11,$FW_BOLD,"")
   GUICtrlSetBkColor(-1,0x00CC66)
   GUICtrlSetOnEvent(-1,"_JANStartAllInterfaces")
   $BUTTON_REFRESH_INTERFACES = GUICtrlCreateButton("Refresh",11,589,289,30)
   GUICtrlSetFont(-1,11,$FW_BOLD,"")
   GUICtrlSetOnEvent(-1,"_RefreshNetwork")

;PING-TAB
$TAB_PING = GUICtrlCreateTabItem("Ping")

   ;NETWERK-TAB, Groep PANEL
   $GROEP_PANEL = GUICtrlCreateGroup("Panel", 11, 34, 289, 161, BitOR($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   $IP_ADRES_PANEL_LABEL = GUICtrlCreateLabel("IP-adres", 19, 50, 51, 17)
   GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
   $IP_ADRES_PANEL = GUICtrlCreateLabel($PING_PANEL_IP, 83, 50, 120, 17)
   ;Maak de knop aan om de panel te pingen
   $BUTTON_PING_PANEL = GUICtrlCreateButton("Ping", 203, 46, 89, 25)
   ;Roep de functie aan om de panel te pingen bij het drukken op de knop
   GUICtrlSetOnEvent($BUTTON_PING_PANEL, "VSOL_FUNC_BUTTON_PING_PANEL")
   $PING_PANEL_STATUS = GUICtrlCreateEdit("", 24, 80, 265, 105, BitOR($ES_AUTOVSCROLL,$ES_WANTRETURN,$WS_VSCROLL))
   GUICtrlSetData(-1, "")
   GUICtrlSetFont(-1, 7, 400, 0, "Microsoft Sans Serif")
   GUICtrlSetColor(-1, 0xFFFFFF)
   GUICtrlSetBkColor(-1, 0x000000)
   GUICtrlCreateGroup("", -99, -99, 1, 1)

   ;NETWERK-TAB, Groep ROUTER
   $GROEP_ROUTER = GUICtrlCreateGroup("Router", 11, 194, 289, 161, BitOR($GUI_SS_DEFAULT_GROUP,$BS_CENTER,$BS_FLAT))
   $IP_ADRES_ROUTER_LABEL = GUICtrlCreateLabel("IP-adres", 19, 210, 51, 17)
   GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
   $IP_ADRES_ROUTER = GUICtrlCreateLabel($PING_ROUTER_IP, 83, 210, 120, 17)
   ;Maak de knop aan om de router te pingen
   $BUTTON_PING_ROUTER = GUICtrlCreateButton("Ping", 203, 206, 89, 25)
   ;Roep de functie aan om de router te pingen bij het drukken op de knop
   GUICtrlSetOnEvent($BUTTON_PING_ROUTER, "VSOL_FUNC_BUTTON_PING_ROUTER")
   $PING_ROUTER_STATUS = GUICtrlCreateEdit("", 24, 240, 265, 105, BitOR($ES_AUTOVSCROLL,$ES_WANTRETURN,$WS_VSCROLL))
   GUICtrlSetData(-1, "")
   GUICtrlSetFont(-1, 7, 400, 0, "Microsoft Sans Serif")
   GUICtrlSetColor(-1, 0xFFFFFF)
   GUICtrlSetBkColor(-1, 0x000000)
   GUICtrlCreateGroup("", -99, -99, 1, 1)

   ;NETWERK-TAB, Groep MANUEEL
   $GROEP_MANUEEL = GUICtrlCreateGroup("Manueel", 11, 354, 289, 161, BitOR($GUI_SS_DEFAULT_GROUP,$BS_CENTER,$BS_FLAT))
   $IPADRESMANUEEL = _GUICtrlIpAddress_Create($VSOL_BACKEND, 19, 370, 184, 25, -1, 0)
   _GUICtrlIpAddress_Set($IPADRESMANUEEL, "0.0.0.0")
   ControlHide($VSOL_BACKEND,"",$IPADRESMANUEEL)
   $BUTTON_PING_MANUEEL = GUICtrlCreateButton("Ping", 211, 370, 81, 25)
   ;Roep de functie aan om manueel te pingen bij het drukken op de knop
   GUICtrlSetOnEvent($BUTTON_PING_MANUEEL, "VSOL_FUNC_BUTTON_PING_MANUEEL")
   $PING_MANUEEL_STATUS = GUICtrlCreateEdit("", 24, 400, 265, 105, BitOR($ES_AUTOVSCROLL,$ES_WANTRETURN,$WS_VSCROLL))
   GUICtrlSetData(-1, "")
   GUICtrlSetFont(-1, 7, 400, 0, "Microsoft Sans Serif")
   GUICtrlSetColor(-1, 0xFFFFFF)
   GUICtrlSetBkColor(-1, 0x000000)
   GUICtrlCreateGroup("", -99, -99, 1, 1)

;FUJIFILM-TOOLS-TAB
$TAB_FUJIFILM_TOOLS = GUICtrlCreateTabItem("FujiFilm Tools")

   $FFTOOLS_SU = GUICtrlCreateButton("Service Utility", 11, 34, 289, 40, BitOR($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetOnEvent($FFTOOLS_SU, "VSOL_FFTOOLS_SU")
   GUICtrlSetState($FFTOOLS_SU,$GUI_DISABLE)
   $FFTOOLS_UU = GUICtrlCreateButton("User Utility", 11,79,289,40, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetOnEvent($FFTOOLS_UU, "VSOL_FFTOOLS_UU")
   GUICtrlSetState($FFTOOLS_UU,$GUI_DISABLE)
   $FFTOOLS_RUPC = GUICtrlCreateButton("RUPC-tool", 11,124,289,40, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetOnEvent($FFTOOLS_RUPC, "VSOL_FFTOOLS_RUPC")
   GUICtrlSetState($FFTOOLS_RUPC,$GUI_DISABLE)
   $FFTOOLS_RESTART_MCM = GUICtrlCreateButton("Herstart MCManager", 11,169,289,40, BitOr($GUI_SS_DEFAULT_GROUP,$BS_CENTER))
   GUICtrlSetOnEvent($FFTOOLS_RESTART_MCM, "VSOL_FFTOOLS_RESTART_MCM")
   GUICtrlSetState($FFTOOLS_RESTART_MCM,$GUI_DISABLE)

;SETTINGS-TAB
$TAB_SETTINGS = GUICtrlCreateTabItem("Settings")

   $FFSETTINGS_INTERFACE1_LABEL = GUICtrlCreateLabel("Interface 1",11,34,140)
   $FFSETTINGS_INTERFACE1_INPUT = GUICtrlCreateInput($Interface1,155,34,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_INTERFACE2_LABEL = GUICtrlCreateLabel("Interface 2",11,59,140)
   $FFSETTINGS_INTERFACE2_INPUT = GUICtrlCreateInput($Interface2,155,59,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_INTERFACE3_LABEL = GUICtrlCreateLabel("Interface 3",11,84,140)
   $FFSETTINGS_INTERFACE3_INPUT = GUICtrlCreateInput($Interface3,155,84,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_INTERFACE4_LABEL = GUICtrlCreateLabel("Interface 4",11,109,140)
   $FFSETTINGS_INTERFACE4_INPUT = GUICtrlCreateInput($Interface4,155,109,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_PANEL_LABEL = GUICtrlCreateLabel("Panel IP",11,144,140)
   $FFSETTINGS_PANEL_INPUT = GUICtrlCreateInput($PING_PANEL_IP,155,144,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_ROUTER_LABEL = GUICtrlCreateLabel("Router IP",11,169,140)
   $FFSETTINGS_ROUTER_INPUT = GUICtrlCreateInput($PING_ROUTER_IP,155,169,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_WIFIFUJI_LABEL = GUICtrlCreateLabel("Panelconnectie",11,204,284)
   $FFSETTINGS_WIFIFUJI_INPUT = GUICtrlCreateInput($WifiFUJIFILM,155,204,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_WIFIFREE1_LABEL = GUICtrlCreateLabel("Wifi-adapter 2",11,229,284)
   $FFSETTINGS_WIFIFREE1_INPUT = GUICtrlCreateInput($WifiFREE1,155,229,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_WIFIFREE2_LABEL = GUICtrlCreateLabel("Wifi-adapter 3",11,254,284)
   $FFSETTINGS_WIFIFREE2_INPUT = GUICtrlCreateInput($WifiFREE2,155,254,140)
   GUICtrlSetState(-1,64)
   $FFSETTINGS_SAVE_BUTTON = GUICtrlCreateButton("Save settings",11,300,284)
   GuiCtrlSetOnEvent($FFSETTINGS_SAVE_BUTTON, "SaveNaarIni")

;Beëindig het maken van tabs
GUICtrlCreateTabItem("")
GUISetState(@SW_SHOW,$VSOL_BACKEND)
#EndRegion ### END Koda GUI section ###

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...