Recently Browsing 0 members
No registered users viewing this page.
The progress of 7zip is displayed, and the problem of subvolume decompression is encountered. - (Moved)By netmaple
I am a novice and my English is not very good, I hope everyone can understand my statement and give me some advice, thanks.
The code is very suitable for echoing the progress bar when the 7z file is released, but FileGetSize cannot correctly echo the progress bar when encountering multiple sub-volume compressed files.
For example, AA.7z.001, AA.7z.002, AA.7z.003, AA.7z.004, AA.7z.005, AA.7z.006, AA.7z.007, AA.7z.008, AA .7z.009, AA.7z.010…………,
FileGetSize can only progress by AA.7z.001. The card is 100% completed. Please help me, and help me solve the file detection part of FileGetSize. thank.
#include <array.au3> #include <GUIConstantsEx.au3> #include <ProgressConstants.au3> Global $Title = "7zip progress echo demo" $hGUI = GUICreate($Title, 320, 80,-1,-1) $progressbar = GUICtrlCreateProgress(10, 10, 300, 30) $btn = GUICtrlCreateButton("Start", 125, 45, 70, 30) GUISetState() While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $btn $ExtrTarget = 'E:\DP' ;Release path $ExtrSource = 'E:\mtest.7z' ;Target file $UnPack_line = ' x -y -o' & '"'& $ExtrTarget & '"' & ' ' & '"'& $ExtrSource & '"' _GetPIODataSend2Bar('7za.exe', $UnPack_line, FileGetSize($ExtrSource), $progressbar) GUICtrlSetData($progressbar, 100) MsgBox(0, '', 'Successful release') GUICtrlSetData($progressbar, 0) GUICtrlSetData($hGUI, "") Exit EndSwitch WEnd Func _GetPIODataSend2Bar($Execute, $Commandline, $Param, $Ctrl) Local $Pid, $PIOData, $iPercentage, $iPercentageBefore $Pid = Run ($Execute & $Commandline, '', @SW_HIDE) While ProcessExists($Pid) $PIOData = ProcessGetStats($Execute, 1) If @error Then MsgBox(0, '', $Execute) Else $iPercentage = Round($PIOData/$Param*100) If $iPercentage <> $iPercentageBefore And $iPercentage > 0 And $iPercentage <= 100 Then ConsoleWrite('->-' & $iPercentage & @CRLF) GUICtrlSetData($Ctrl , $iPercentage) WinSetTitle($hGUI, "", $Title & " " & $iPercentage & "%") EndIf EndIf WEnd Return $iPercentage EndFunc
I know this has been done to death in many programming languages and probably even in AutoIt.
But couldn't help myself and as a learning challenge I wrote "yet another converter" LOL
I need your help to test it and show me "the error of my ways" but in a nutshell here's what it can do already (taken from my source file) :
Converts all zip files recursively into a 7Zip file, with max compression REQUIRES AUTOIT Version 220.127.116.11 + Exact copy with attributes and folder structure + Extensive error checking, including files blocked by anti-virus (by file count) + Can stop process and restart later with the use of a log file + Can pause process (but in between compressing / extracting files) + Creates a .CSV file that can be used to check on compression ratios + Dynamic GUI that enables user to see console while 7zip is working + Gui can be stretched horizontally for long filenames + Up to 5 retries while transfering compressed files + Checks free space (at startup) to make sure you don't kill your OS LOL + Have converted 10,000+ files with no issues in file integrity. + Open to suggestions and program free to modify to your liking + Will eventually be fully modular and configurable (if there is interest for this) + Exit codes so you can have an idea where program went wrong (if it did) + Fully commented so users can tinker away. - Cannot save archive comments. - Not FULLY tested yet, do not use on .zip files that have no backups The program also has a very minimal GUI that can be stretched. Not a huge fan of million-button interfaces.
I also assume some people running this program will have a 1024x768 monitor so the GUI is made accordingly.
There is no way I am keeping this script for myself. If this is useful to anybody, feel free to use it and modify it. All I ask is you credit me (as I will credit those who contribute).
Now here's the issues that are left to fix. Any help is greatly appreciated and I will add your name in the credits if you so wish.
- For some reason while compression is under way, all my current explorer windows flicker; notably the cut-and-paste part. I can't seem to narrow it down.
- Also context menu is closed in explorer every time program compresses / extracts a new file
- I've added support for retries if, for some reason, AutoIt can't move the converted file. This happened once after 5000-6000 conversions. Now that I've programmed the retries, the process is somewhat slower. It shouldn't affect speed though.
- After compressing 10,000+ files (Yes I have that many zip files! Think Mame) I've had a system meltdown. There's a leak somewhere. Am I supposed to close something and I'm not? I've added _IsPressed() lately so closing that .DLL is not the cause of this leak.
- Subtracting one array from another was a tricky thing to program (happens when user stops and restarts process), if you can think of a faster way I'm all in.
Obviously if you find bugs or have suggestions, I'm all ears.
Changelog is included in the source file, including credits.
PLEASE DON'T CONVERT ALL YOUR FILES YET. It's not fully tested (well I tested it but I need others to test too).
I'm trying to drive a command prompt by sending instructions via a NamedPipe.
This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
suggestions on how to make it work are welcome
#include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite
What is Rollbar?
Rollbar provides real-time error alerting & debugging tools for developers. Learn more about it at https://rollbar.com/product/
; Include RollbarSDK #include "RollbarSDK.au3" ;Turns on ConsoleWrite debugging override. ;Global $Rollbar_Debug=False ; Initialize RollbarSDK with the project's API key. ; Parameters ....: $__Rollbar_sToken - [Required] Go to https://rollbar.com/<User>/<ProjectName>/settings/access_tokens/ for your project. Use the token for post_server_item. _Rollbar_Init("eaa8464a4082eeabd9454465b8f0c0af") ; Write code that causes an error you want to catch, then call ; _Rollbar_Send ; Parameters ....: $__Rollbar_sErrorLevel - [Required] Must be one of the following values: Debug, Info, Warning, Error, Critical. ; $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_Send("Debug", "This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_Send("Warning", "This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_Send("Error", "This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_Send("Critical", "This is an critical message. If you received this, you were successful!", "Critical Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!") ;No Message ; Rollbar_Send's helper functions ; Parameters ....: $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_SendDebug("This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_SendInfo("This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_SendWarning("This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_SendError("This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_SendCritical("This is an critical message. If you received this, you were successful!", "Critical Message") ; Usable Example Local $sImportantFile = "C:\NOTAREALFILE_1234554321.txt" Switch FileExists($sImportantFile) Case True MsgBox(0, "Example Script", "An important file was found. Continuing...") Case Else _Rollbar_SendCritical('An important file was missing. Halting... File: "' & $sImportantFile & '"', 'Important file "' & $sImportantFile & '" is missing.') EndSwitch Notes: Please comment your feedback, advice, & suggestions below. While this is only a proof of concept, I will expand its feature set for everyone to use.
Right now, it is fully functional but not tested in production.
Can not get my head around this one.
This function gets the DNS object s
If you have two DNS entries fine. but if you have only one! Trouble
$objItem.DNSServerSearchOrder = Primary DNS
$objItem.DNSServerSearchOrder = Secondry DNS not always there. I need a way to return 0 if not there or the IP if its there.
Or is there a way to tell how many objects there are in the "[?]"
I'm terrible at WMI errors, thanks for help in advance.
Func _GETcurrentNICinfo2() $oErrors = ObjEvent("AutoIt.Error", "Error_Handle") Local $DnsSecondry Local $objWMIService = ObjGet( "winmgmts:\\" & @ComputerName & "\root\CIMV2" ) Local $query = $objWMIService.ExecQuery("SELECT DNSServerSearchOrder FROM Win32_NetworkAdapterConfiguration WHERE Index = " & _GetSelectedNIC(), "WQL", 0x30 ) If @error Then Return 0 If NOT IsObj($query) Then Return 0 Else For $objItem In $query Return $objItem.DNSServerSearchOrder next Endif EndFunc