Running 3.3.15.0-Beta with 3.3.14.4 or .5

Decibel · March 16, 2018

I ran into an issue when updating from 3.3.14.2 to 3.3.14.4 or .5 with SciTE as my editor. The code completion didn't pick up the new _DebugArrayDisplay UDF from debug.au3. After a few rounds of uninstalling AutoIt, AutoIt Beta, and SciTE, then reinstalling in various different orders and checking for code completion, I determined that it was the 3.3.15.0-Beta that was messing it up in the files \SciTE\api\au3.api, and \SciTE\Properties\au3.keywords.properties.

The question is, are we not supposed to be concurrently running those versions any longer, or will there be an update to Beta soon to alleviate this?

Here's the diff of the au3.api file showing what is in 3.3.14.5, but not in 3.3.15.0-Beta, which makes code completion not work in SciTE:

_DebugArrayDisplay
_GDIPlus_BitmapSetResolution
_GDIPlus_ImageAttributesSetRemapTable
_GDIPlus_ImageAttributesSetThreshold
_GDIPlus_ImageClone
_GDIPlus_ImageGetFrameCount
_GDIPlus_ImageGetPropertyIdList
_GDIPlus_ImageGetPropertyItem
_GDIPlus_ImageSaveAdd
_GDIPlus_ImageSaveAddImage
_GDIPlus_ImageSelectActiveFrame
_GDIPlus_MatrixCreate2
_GDIPlus_PenResetTransform
_GDIPlus_PenRotateTransform
_GDIPlus_PenScaleTransform
_GDIPlus_PenSetCompound
_GDIPlus_PenSetTransform
_GDIPlus_RegionSetEmpty
_GDIPlus_RegionSetInfinite
_MathCheckDiv

I merged those missing lines to the au3.api file created/updated by 3.3.15.0-Beta and now I have what I wanted to see. However, there are a ton of other lines that exist in both that have differences between them. I plan on referring to the Help file when weird stuff start happening, or not happening, to see why that is.

Dealing with the au3.keywords.properties file was a bit too much like work, and given the differences cited above, it seemed futile.

au3.api

Jos · March 16, 2018

The SciTE setup works with either the latest production or Beta definitions. You can toggle between the 2 using SciTEConfig.

Jos

Decibel · March 16, 2018

I am just not seeing where to do that. In SciTE-->Tools-->SciTe Config I do not see anything to toggle those files between Release and Beta.

Jos · March 16, 2018

mmm ... You are right. I know I had it supported in the past but think it was changed to simply used the definitions of the last installed Autoit3 installer.

There is a copy of the files in the Defs subdir, so it is easy to write a script to copy the Beta or Production files.

Jos

nobbitry · June 3, 2018

Sorry, I had the same Problem. To uninstall Beta and Stable and then reinstall only the stable helped me.

I', not a native speaker and I'm not sure, if thats the problem. But was the following question answered?

On 16.3.2018 at 7:11 PM, Decibel said:

The question is, are we not supposed to be concurrently running those versions any longer, or will there be an update to Beta soon to alleviate this?

Can I install the 3.3.15.0-Beta without these problems? How can I do it?

Zedna · June 4, 2018

Here is source of UpdateDefs.au3 from older version of Scite which does what you need as Jos said:

"C:\Program Files (x86)\AutoIt3\SciTE\Defs\UpdateDefs.au3"

#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_icon=filetype2.ico
#AutoIt3Wrapper_UseX64=n
#AutoIt3Wrapper_Res_Comment=Script to update the SciTe installation with the correct definitions
#AutoIt3Wrapper_Res_Description=Update the SciTe definitions files
#AutoIt3Wrapper_Res_Fileversion=1.4.4.2
#AutoIt3Wrapper_Res_Fileversion_AutoIncrement=p
#AutoIt3Wrapper_Res_LegalCopyright=Copyright © 2009 Jos van der Zande
://////=__=
://////=__=.=
#AutoIt3Wrapper_Run_After=copy "%in%" "..\..\Programs_Updates\Defs\*.*"
#AutoIt3Wrapper_Run_After=copy "%out%" "..\..\Programs_Updates\Defs\*.*"
#AutoIt3Wrapper_Run_Obfuscator=y
#Obfuscator_Parameters=/SO
#AutoIt3Wrapper_cvsWrapper_Parameters=/comments "%fileversion% \n"
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include<misc.au3>
#AutoIt3Wrapper_UseAnsi=y
$Debug = 1
Opt("TrayIconDebug", 1)
;
FileChangeDir(@ScriptDir)
$PRODUNCTIONTEXT = IniRead(@ScriptDir & "\versioninfo.ini", "Version", "Production", "Production definitions")
$BetaTEXT = "Beta:" & IniRead(@ScriptDir & "\versioninfo.ini", "Version", "Beta", "Beta definitions")
Global $Version = FileGetVersion(@ScriptFullPath)
$Version = StringLeft($Version, StringInStr($Version, ".", 0, -2) - 1)
; get new registry settings for AutoIt3 location
$AutoItDir = RegRead("HKLM\Software\Autoit v3\AutoIt", "InstallDir")
; if wrong.. check for Old registry settings
If @error Or Not FileExists($AutoItDir & "\autoit3.exe") Then
    If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "1. $AutoItDir=" & $AutoItDir)
    $AutoItDir = RegRead("HKLM\Software\HiddenSoft\AutoIt3", "InstallDir")
    ; if wrong guess ourselfs
    If @error Or Not FileExists($AutoItDir & "\autoit3.exe") Then
        $AutoItDir = @ProgramFilesDir & "\AutoIt3"
        If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "2. $AutoItDir=" & $AutoItDir)
    EndIf
EndIf
If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "3. $AutoItDir=" & $AutoItDir)
; get new registry settings for AutoIt3 location
$AutoItDirBeta = RegRead("HKLM\Software\Autoit v3\AutoIt", "BetaInstallDir")
; if wrong.. check for Old registry settings
If @error Or Not FileExists($AutoItDirBeta & "\autoit3.exe") Then
    If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "1. $AutoItDirBeta=" & $AutoItDirBeta)
    $AutoItDirBeta = @ProgramFilesDir & "\AutoIt3\Beta"
    If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "2. $AutoItDirBeta=" & $AutoItDirBeta)
EndIf
If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "3. $AutoItDirBeta=" & $AutoItDirBeta)
Dim $I_PRODUCTION, $SELECTION
Global $Silent = 0
For $x = 1 To $CMDLINE[0]
    If StringLeft($CMDLINE[$x], 4) = "Prod" Then $SELECTION = "Production"
    If StringLeft($CMDLINE[$x], 4) = "Unst" Then $SELECTION = "Beta"
    If StringLeft($CMDLINE[$x], 4) = "Beta" Then $SELECTION = "Beta"
    If StringLeft($CMDLINE[$x], 6) = "Latest" Then $SELECTION = "Latest"
    If $CMDLINE[$x] = "/S" Then $Silent = 1
Next
FileDelete(@ScriptDir & "\updateDefs.log")
If $SELECTION = "" Then
    Opt("guicoordmode", 1)
    ;Opt("GUINotifyMode", 1)
    GUICreate("SciTE definition selection (" & $Version & ")", 350, 150)
    GUISetFont(10, 600)
    GUICtrlCreateLabel("Select which definitions you want to use for: Scite,Tidy,FuncPopUp.", 10, 10, 340, 40)
    GUISetFont(9, 400)
    Global $I_PRODUCTION = GUICtrlCreateRadio($PRODUNCTIONTEXT, 40, 50, 270, 20)
    Global $I_Beta = GUICtrlCreateRadio($BetaTEXT, 40, 75, 270, 20)
    Global $I_OK = GUICtrlCreateButton("&Update", 40, 110, 120, 25)
    Global $I_CANCEL = GUICtrlCreateButton("&Cancel", 170, 110, 120, 25)
    ;
    GUICtrlSetState($I_PRODUCTION, 1)
    GUISetState(@SW_SHOW)
    While 1
        $RC = GUIGetMsg()
        ; Cancel clicked
        If $RC = 0 Then ContinueLoop
        If $RC = $I_OK Then ExitLoop
        If $RC = $I_CANCEL Then
            $RC = MsgBox(4100, "Update SciTE Definitions", "do you want to stop this update process?")
            If $RC = 6 Then Exit
        EndIf
        If $RC = -3 Then Exit
    WEnd
EndIf
;
If $SELECTION = "Latest" Then
    If Not FileExists($AutoItDirBeta & "\autoit3.exe") Then
        $SELECTION = "Production"
    Else
        $ProdVer = StringSplit(FileGetVersion($AutoItDir & "\autoit3.exe"), ".")
        $BetaVer = StringSplit(FileGetVersion($AutoItDirBeta & "\autoit3.exe"), ".")
        ReDim $ProdVer[5], $BetaVer[5]
        For $x = 1 To 4
            If $ProdVer[$x] = $BetaVer[$x] Then ContinueLoop
            If $ProdVer[$x] > $BetaVer[$x] Then
                $SELECTION = "Production"
            Else
                $SELECTION = "Beta"
            EndIf
            ExitLoop
        Next
    EndIf
EndIf
;
$msgtext = @LF & @LF & "Run program " & @ScriptFullPath & " again when you want to change the definition files."
$SciteDir = StringLeft(@ScriptDir, StringInStr(@ScriptDir, "\", 0, -1) - 1)
GUISetState(@SW_HIDE)
If $Silent = 0 Then ProgressOn("Scite Config files", "Copying Files")
FileChangeDir(@ScriptDir)
If $Silent = 0 Then ProgressSet(30, "Update au3.properties")
If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "$SciteDir=" & $SciteDir)
Update_Autoit_Path($SciteDir)
Sleep(500)
If GUICtrlRead($I_PRODUCTION) = 1 Or $SELECTION = "Production" Then
    If $Silent = 0 Then ProgressSet(50, "Copying files version:" & $PRODUNCTIONTEXT)
    CopyFiles(@ScriptDir & '\Production', $SciteDir)
    UpdateAbbr(@ScriptDir & '\Production\au3abbrev.properties')
    Sleep(500)
    If $Silent = 0 Then ProgressOff()
    If $Silent = 0 Then MsgBox(4096, "Scite Config", "Definitions for:" & $PRODUNCTIONTEXT & " copied to Scite." & $msgtext, 10)
Else
    If $Silent = 0 Then ProgressSet(50, "Copying files version:" & $BetaTEXT)
    CopyFiles(@ScriptDir & '\Beta', $SciteDir)
    Sleep(500)
    UpdateAbbr(@ScriptDir & '\Beta\au3abbrev.properties')
    If $Silent = 0 Then ProgressOff()
    If $Silent = 0 Then MsgBox(4096, "Scite Config", "Definitions for:" & $BetaTEXT & " copied to Scite." & $msgtext, 10)
EndIf
GUIDelete()
;update configfile autoit dir
Func Update_Autoit_Path($SciTEPath)
    ; if still wrong AutoIt3 Directory then prompt for it.
    While Not FileExists($AutoItDir & "\autoit3.exe")
        $AutoItDir = FileSelectFolder("Select the AutoIt3 programfolder", @ProgramFilesDir)
        If @error = 1 Then
            $RC = MsgBox(4100, "Update SciTE Definitions", "do you want to stop the process?")
            If $RC = 6 Then Exit
        EndIf
    WEnd
    ;**** Check The Beta directory
    $BetaAutoItDir = RegRead("HKLM\Software\Autoit v3\AutoIt", "BetaInstallDir")
    If @error Or Not FileExists($BetaAutoItDir & "\autoit3.exe") Then
        $BetaAutoItDir = $AutoItDir & '\Beta'
        If Not FileExists($BetaAutoItDir & "\autoit3.exe") Then
            $BetaAutoItDir = @ProgramFilesDir & '\AutoIt3\Beta'
        EndIf
    EndIf
    ;**** Check The SciTE directory
    While Not FileExists($SciTEPath & "\properties\au3.properties")
        $SciTEPath = FileSelectFolder("Select the SciTE programfolder", @ProgramFilesDir)
        If @error = 1 Then
            $RC = MsgBox(4100, "Update SciTE Definitions", "do you want to stop the process?")
            If $RC = 6 Then Exit
        EndIf
    WEnd
    ;Process au3.properties
    $H_Out = FileOpen(@TempDir & "\au3.backup", 2)
    $H_in = FileOpen($SciTEPath & "\properties\au3.properties", 0)
    If $H_in = -1 Then
        If $Silent = 0 Then MsgBox(0, "Error", "Unable to open file:" & $SciTEPath & "\properties\au3.properties")
        Exit
    EndIf
    If $Debug = 1 Then
        FileWriteLine(@ScriptDir & "\updateDefs.log", "4. $AutoItDir=" & $AutoItDir)
        FileWriteLine(@ScriptDir & "\updateDefs.log", $SciTEPath & "\properties\au3.properties")
    EndIf
    While 1
        $irec = FileReadLine($H_in)
        If @error = -1 Then ExitLoop
        If StringLeft($irec, 11) = "autoit3dir=" Then
            If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "Found autoit3dir=" & $irec)
            $irec = "autoit3dir=" & $AutoItDir
            If $Debug = 1 Then FileWriteLine(@ScriptDir & "\updateDefs.log", "New   autoit3dir=" & $irec)
        EndIf
        FileWriteLine($H_Out, $irec)
    WEnd
    FileClose($H_in)
    FileClose($H_Out)

    ; save last version
    FileCopy($SciTEPath & "\properties\au3.properties", $SciTEPath & "\properties\au3_Old.properties", 1)
    ; move new file to au3.properties
    $fh = FileOpen($SciTEPath & "\properties\au3.properties", 2)
    FileWrite($fh, FileRead(@TempDir & "\au3.backup"))
    FileClose($fh)
    ;
    If $Debug = 1 Then
        FileWriteLine(@ScriptDir & "\updateDefs.log", "*** Start New Au3.properties *****************************************************************")
        FileWriteLine(@ScriptDir & "\updateDefs.log", FileRead($SciTEPath & "\properties\au3.properties"))
        FileWriteLine(@ScriptDir & "\updateDefs.log", "*** END   New Au3.properties *****************************************************************")
    EndIf
    ; Reload the properties to ensure the Path is updated when SciTE is already running.
    Reload_Config()
    ;

EndFunc   ;==>Update_Autoit_Path
;
Func CopyFiles($fromdir, $todir)
    FileCopy($fromdir & "\*.*", $todir & "\properties\", 1)
    FileCopy($fromdir & "\api\au3.api", $todir & "\api\", 1)
    ;FileCopy($fromdir & "\Au3Check\*.*", $todir & "\Au3Check\", 1)
    FileCopy($fromdir & "\FuncPopUp\*.*", $todir & "\FuncPopUp\", 1)
    FileCopy($fromdir & "\Tidy\au3.api", $todir & "\Tidy\", 1)
EndFunc   ;==>CopyFiles
;
Func UpdateAbbr($NewAbbrFile)
    Local $UserDir = @UserProfileDir
    Local $AbbrFile, $H_Input, $H_Output, $H_NewInput, $I_Rec
    If @OSType = "WIN32_NT" Then
        $UserDir = @UserProfileDir
    Else
        $UserDir = $SciteDir ; needed for Win9x
    EndIf
    $AbbrFile = $UserDir & "\abbrev.properties"
    $H_Output = FileOpen(@TempDir & "\abbrev.properties", 2)
    ; read current abbrev.properties till the end or stuff we put in
    FileWriteLine(@ScriptDir & "\updateDefs.log", "$AbbrFile=" & $AbbrFile)
    FileWriteLine(@ScriptDir & "\updateDefs.log", "@TempDir=" & @TempDir)
    If FileExists($AbbrFile) Then
        $H_Input = FileOpen($AbbrFile, 0)
        If $H_Input <> -1 Then
            FileWriteLine(@ScriptDir & "\updateDefs.log", "* Start writing start section.")
            $I_Rec = FileReadLine($H_Input)
            While @error = 0 And $I_Rec <> "#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#"
                FileWriteLine($H_Output, $I_Rec)
                $I_Rec = FileReadLine($H_Input)
            WEnd
            ; Now read till the end of our definition
            $I_Rec = FileReadLine($H_Input)
            FileWriteLine(@ScriptDir & "\updateDefs.log", "* Skipping midle section.")
            While Not @error And $I_Rec <> "#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#"
                $I_Rec = FileReadLine($H_Input)
            WEnd
            ; Now copy records put after our stuff to the new file
            FileWriteLine(@ScriptDir & "\updateDefs.log", "* Start writing our $AbbrFile.")
            $I_Rec = FileReadLine($H_Input)
            While Not @error
                FileWriteLine($H_Output, $I_Rec)
                $I_Rec = FileReadLine($H_Input)
            WEnd
            FileClose($H_Input)
        EndIf
    EndIf
    ; write all records to NewAbbrev file
    If FileExists($NewAbbrFile) Then
        ; add \ to SciTEpatrh and change each \ to \\
        ; get new registry settings for AutoIt3 location
        $AutoItDir = RegRead("HKLM\Software\Autoit v3\AutoIt", "InstallDir")
        ; if wrong.. check for Old registry settings
        If @error Or Not FileExists($AutoItDir & "\autoit3.exe") Then
            $AutoItDir = RegRead("HKLM\Software\HiddenSoft\AutoIt3", "InstallDir")
            ; if wrong guess ourselfs
            If @error Or Not FileExists($AutoItDir & "\autoit3.exe") Then
                $AutoItDir = @ProgramFilesDir & "\AutoIt3"
            EndIf
        EndIf
        $AutoItDir = StringReplace($AutoItDir & "\", "\", "\\")
        FileWriteLine(@ScriptDir & "\updateDefs.log", "$AutoItDir=" & $AutoItDir)
        $H_NewInput = FileOpen($NewAbbrFile, 0)
        If $H_NewInput <> -1 Then
            FileWriteLine($H_Output, "#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#")
            FileWriteLine($H_Output, "Created by UpdateDefs  (don't change anything between the dashed lines)")
            FileWriteLine($H_Output, "#------------------------------------------------------------")
            $I_Rec = FileReadLine($H_NewInput)
            While Not @error
                FileWriteLine($H_Output, StringReplace($I_Rec, "C:\\Program Files\\Autoit3\\", $AutoItDir))
                $I_Rec = FileReadLine($H_NewInput)
            WEnd
            FileWriteLine($H_Output, "#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#")
            FileClose($H_NewInput)
        EndIf
    EndIf
    FileClose($H_Output)
    FileCopy($AbbrFile, $AbbrFile & ".bak", 1)
    $RC = FileMove(@TempDir & "\abbrev.properties", $AbbrFile, 1)
    FileWriteLine(@ScriptDir & "\updateDefs.log", "FileReplaced $AbbrFile rc=" & $RC)
EndFunc   ;==>UpdateAbbr
;
Func Reload_Config()
    Opt("WinSearchChildren", 1)
    ;Send SciTE Director my GUI handle so it will report info back from SciTE
    Local $SciTE_hwnd = WinGetHandle("DirectorExtension")
    SendSciTE_Command(0, $SciTE_hwnd, "reloadproperties:")
EndFunc   ;==>Reload_Config
;
Func SendSciTE_Command($My_Hwnd, $SciTE_hwnd, $sCmd)
    Local $WM_COPYDATA = 74
    Local $CmdStruct = DllStructCreate('Char[' & StringLen($sCmd) + 1 & ']')
    ;ConsoleWrite('-->' & $sCmd & @lf )
    DllStructSetData($CmdStruct, 1, $sCmd)
    Local $COPYDATA = DllStructCreate('Ptr;DWord;Ptr')
    DllStructSetData($COPYDATA, 1, 1)
    DllStructSetData($COPYDATA, 2, StringLen($sCmd) + 1)
    DllStructSetData($COPYDATA, 3, DllStructGetPtr($CmdStruct))
    DllCall('User32.dll', 'None', 'SendMessage', 'HWnd', $SciTE_hwnd, _
            'Int', $WM_COPYDATA, 'HWnd', $My_Hwnd, _
            'Ptr', DllStructGetPtr($COPYDATA))
EndFunc   ;==>SendSciTE_Command

nobbitry · June 4, 2018

Hey Thank you Zedna.

The file didn't exist in my installation..

Everything is fine now. Thank you very much! :thumbsup:

Sign In

Running 3.3.15.0-Beta with 3.3.14.4 or .5

Recommended Posts

Decibel

Link to comment

Share on other sites

Jos

Link to comment

Share on other sites

Decibel

Link to comment

Share on other sites

Jos

Link to comment

Share on other sites

nobbitry

Link to comment

Share on other sites

Zedna

Link to comment

Share on other sites

nobbitry

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

AutoIt Resources

Release

Beta