Jump to content

Recommended Posts

Good evening everyone :)
I'm working on a little project of mines, and I was trying to use WMI Object.
The question which I don't find an answer is: 

Once I do the query with WMI Object, something like "SELECT * FROM Win32_LogonSession", instead of specify the field of the collection returned, ( i.e. $colItems.Caption ), can I loop though each property and each value of the property, writing so one row of code only?
Hope my question was clear enough.
Thanks in advance.

Best Regards.

Edited by FrancescoDiMuro

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

@Earthshine
Thanks a lot, Sir!
Since my knowledge of WMI is very basic, I didn't know about that, AND, I was "Googling" around, before creating this thread, and I found this:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/2a0078db-2053-4e21-9262-62ffbc156862/enumerating-fields-returned-with-a-wmi-query?forum=configmgrgeneral

But, as it seems, that's not the same thing applicable in AutoIt.
By the way, thanks a lot :)

Best Regards. 

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

i googled the following string:

enumerate wmi object properties autoit

it helps to ask the question clearly i have found with google to get more effective answers quickly. it's like my signature... LOL, I've been at this a long time as well. Happy programming. :)

 

My resources are limited. You must ask the right questions

 

Link to post
Share on other sites

@Earthshine
Your signature seems like the phrase from "I Robot", when the Doctor says to Will Smith: "That detective, is the right question" :D
By the way, I was trying to query Win32_PointingDevice, which works like a charm; but, I was interested to see how properties which are arrays, were displayed...
For example, there is the certainty that PowerManagementCapabilities[] will always be an array?
In that case, I tried with:

 

For $objWMI_Item In $objWMIQueryResult
    For $objWMIProperty In $objWMI_Item.Properties_
        If IsArray($objWMIProperty.Name) Then
            ConsoleWrite($objWMIProperty.Name & " is an array!" & @CRLF)
        Else
            ConsoleWrite($objWMIProperty.Name & " = " & $objWMIProperty.Value & @CRLF)
        EndIf
    Next
    ConsoleWrite("--------------------" & @CRLF)
Next

But I don't know if this could be correct.
Thanks again for your help :)

Best Regards.

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

I generated this with ScriptoMatic, in the examples that get installed, for the pointing device.

; Generated by AutoIt Scriptomatic

$wbemFlagReturnImmediately = 0x10
$wbemFlagForwardOnly = 0x20
$colItems = ""
$sComputer = "localhost"

$Output=""
$Output = $Output & "Computer: " & $sComputer  & @CRLF
$Output = $Output & "==========================================" & @CRLF
$oWMIService = ObjGet("winmgmts:\\" & $sComputer & "\root\CIMV2")
$colItems = $oWMIService.ExecQuery("SELECT * FROM Win32_PointingDevice", "WQL", _
                                          $wbemFlagReturnImmediately + $wbemFlagForwardOnly)

If IsObj($colItems) Then
   For $objItem In $colItems
      $Output = $Output & "Availability: " & $objItem.Availability & @CRLF
      $Output = $Output & "Caption: " & $objItem.Caption & @CRLF
      $Output = $Output & "ConfigManagerErrorCode: " & $objItem.ConfigManagerErrorCode & @CRLF
      $Output = $Output & "ConfigManagerUserConfig: " & $objItem.ConfigManagerUserConfig & @CRLF
      $Output = $Output & "CreationClassName: " & $objItem.CreationClassName & @CRLF
      $Output = $Output & "Description: " & $objItem.Description & @CRLF
      $Output = $Output & "DeviceID: " & $objItem.DeviceID & @CRLF
      $Output = $Output & "DeviceInterface: " & $objItem.DeviceInterface & @CRLF
      $Output = $Output & "DoubleSpeedThreshold: " & $objItem.DoubleSpeedThreshold & @CRLF
      $Output = $Output & "ErrorCleared: " & $objItem.ErrorCleared & @CRLF
      $Output = $Output & "ErrorDescription: " & $objItem.ErrorDescription & @CRLF
      $Output = $Output & "Handedness: " & $objItem.Handedness & @CRLF
      $Output = $Output & "HardwareType: " & $objItem.HardwareType & @CRLF
      $Output = $Output & "InfFileName: " & $objItem.InfFileName & @CRLF
      $Output = $Output & "InfSection: " & $objItem.InfSection & @CRLF
      $Output = $Output & "InstallDate: " & WMIDateStringToDate($objItem.InstallDate) & @CRLF
      $Output = $Output & "IsLocked: " & $objItem.IsLocked & @CRLF
      $Output = $Output & "LastErrorCode: " & $objItem.LastErrorCode & @CRLF
      $Output = $Output & "Manufacturer: " & $objItem.Manufacturer & @CRLF
      $Output = $Output & "Name: " & $objItem.Name & @CRLF
      $Output = $Output & "NumberOfButtons: " & $objItem.NumberOfButtons & @CRLF
      $Output = $Output & "PNPDeviceID: " & $objItem.PNPDeviceID & @CRLF
      $Output = $Output & "PointingType: " & $objItem.PointingType & @CRLF
      $strPowerManagementCapabilities = $objItem.PowerManagementCapabilities(0)
      $Output = $Output & "PowerManagementCapabilities: " & $strPowerManagementCapabilities & @CRLF
      $Output = $Output & "PowerManagementSupported: " & $objItem.PowerManagementSupported & @CRLF
      $Output = $Output & "QuadSpeedThreshold: " & $objItem.QuadSpeedThreshold & @CRLF
      $Output = $Output & "Resolution: " & $objItem.Resolution & @CRLF
      $Output = $Output & "SampleRate: " & $objItem.SampleRate & @CRLF
      $Output = $Output & "Status: " & $objItem.Status & @CRLF
      $Output = $Output & "StatusInfo: " & $objItem.StatusInfo & @CRLF
      $Output = $Output & "Synch: " & $objItem.Synch & @CRLF
      $Output = $Output & "SystemCreationClassName: " & $objItem.SystemCreationClassName & @CRLF
      $Output = $Output & "SystemName: " & $objItem.SystemName & @CRLF
      If MsgBox(1,"WMI Output",$Output) = 2 Then ExitLoop
      $Output=""
   Next
Else
   MsgBox(0,"WMI Output","No WMI Objects Found for class: " & "Win32_PointingDevice" )
EndIf


Func WMIDateStringToDate($dtmDate)

    Return (StringMid($dtmDate, 5, 2) & "/" & _
    StringMid($dtmDate, 7, 2) & "/" & StringLeft($dtmDate, 4) _
    & " " & StringMid($dtmDate, 9, 2) & ":" & StringMid($dtmDate, 11, 2) & ":" & StringMid($dtmDate,13, 2))
EndFunc

 

My resources are limited. You must ask the right questions

 

Link to post
Share on other sites

remember you are querying a database of sorts, you get a result set to iterate through. I don't think those are array's the way you are thinking.

and my sig is from I, Robot, maybe a little different but supposed to convey the same message.

that was a great movie, but nowhere near what Issac Asimov created with that story. But, I loved it anyway.

Edited by Earthshine

My resources are limited. You must ask the right questions

 

Link to post
Share on other sites

@Earthshine
Yes I did... Now I've copy-pasted the code of that function, and applied to my script; but, there is certainty that the array will always be an array, and will always contains values? :)
Sorry for my newbie question :)

Best Regards.

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

Good morning @Earthshine:)
So, a normal

If IsArray($objProperty.Value) Then
    ; Do stuffs with array
Else
    ; Do stuffs if is not an array
EndIf

would be correct, isn't it? :)
Thanks for your help.

Best Regards.

Edited by FrancescoDiMuro

Click here to see my signature:

Spoiler

ALWAYS GOOD TO READ:

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By sylremo
      I tried to implement the code in this topic:
      Firstly, i have no idea how these lines of code work but meanwhile i noticed that:
      ; Everytime autoit wants to call a method, get or set a property in a object it needs to go to ; IDispatch::GetIDsFromNames. This is our version of that function, note that by defining this ourselves ; we can fool autoit to believe that the object supports a lot of different properties/methods. Func __IDispatch_GetIDsFromNames($pSelf, $riid, $rgszNames, $cNames, $lcid, $rgDispId) ... EndFunc The problem is i ran into is that some object calls didn't go through IDispatch::GetIDsFromNames.
      Here is the code to replicate what i'm mentioning:
      I followed the example in the topic and tried to do the same thing with method .Documents (line 193) and .Open (line 194) but didn't get the same result because .Documents was being passed through __IDispatch_GetIDsFromNames while .Open didn't.
      $Au3_CallByName = 'Documents' Local $oDoc = $oAppl.Au3_CallByName $Au3_CallByName = 'Open' $oDoc = $oDoc.Au3_CallByName($sFilePath, $bConfirmConversions, $bReadOnly, $bAddToRecentFiles, $sOpenPassword, "", $bRevert, $sWritePassword, "", $iFormat) Console outputs:
      ==> The requested action with this object has failed.: $oDoc = $oDoc.Au3_CallByName($sFilePath, $bConfirmConversions, $bReadOnly, $bAddToRecentFiles, $sOpenPassword, "", $bRevert, $sWritePassword, "", $iFormat) $oDoc = $oDoc^ ERROR Is there any workarounds to solve this?

      Thank you!
    • By jguinch
      Hello.
      I did create these few functions several months ago. I post here, if it can interest someone.
      These functions based on WMI queries allow you to manage printers : add / delete printer, driver, port, or obtain configuration, set default printer ... I let you discover it with the code.

       
      Here is the list of the available functions :
      _PrintMgr_AddLocalPort
      _PrintMgr_AddLPRPort
      _PrintMgr_AddPrinter
      _PrintMgr_AddPrinterDriver
      _PrintMgr_AddTCPIPPrinterPort
      _PrintMgr_AddWindowsPrinterConnection
      _PrintMgr_CancelAllJobs
      _PrintMgr_CancelPrintJob
      _PrintMgr_EnumPorts
      _PrintMgr_EnumPrinter
      _PrintMgr_EnumPrinterConfiguration
      _PrintMgr_EnumPrinterDriver
      _PrintMgr_EnumPrinterProperties
      _PrintMgr_EnumPrintJobs
      _PrintMgr_EnumTCPIPPrinterPort
      _PrintMgr_Pause
      _PrintMgr_PortExists
      _PrintMgr_PrinterExists
      _PrintMgr_PrinterSetComment
      _PrintMgr_PrinterSetDriver
      _PrintMgr_PrinterSetPort
      _PrintMgr_PrinterShare
      _PrintMgr_PrintTestPage
      _PrintMgr_RemoveLocalPort
      _PrintMgr_RemoveLPRPort
      _PrintMgr_RemovePrinter
      _PrintMgr_RemovePrinterDriver
      _PrintMgr_RemoveTCPIPPrinterPort
      _PrintMgr_RenamePrinter
      _PrintMgr_Resume
      _PrintMgr_SetDefaultPrinter
       
       
      And some examples :
      #include <Array.au3> #include "PrintMgr.au3" _Example() Func _Example() ; Remove a printer called "My old Lexmark printer" : _PrintMgr_RemovePrinter("My old Lexmark printer") ; Remove the driver called "Lexmark T640" : _PrintMgr_RemovePrinterDriver("Lexmark T640") ; Remove the TCP/IP printer port called "TCP/IP" _PrintMgr_RemoveTCPIPPrinterPort("MyOLDPrinterPort") ; Add a driver, called "Samsung ML-451x 501x Series", and driver inf file is ".\Samsung5010\sse2m.inf" _PrintMgr_AddPrinterDriver("Samsung ML-451x 501x Series", "Windows NT x86", @ScriptDir & "\Samsung5010", @ScriptDir & "\Samsung5010\sse2m.inf") ; Add a TCP/IP printer port, called "MyTCPIPPrinterPort", with IPAddress = 192.168.1.10 and Port = 9100 _PrintMgr_AddTCPIPPrinterPort("MyTCPIPPrinterPort", "192.168.1.10", 9100) ; Add a printer, give it the name "My Printer", use the driver called "Samsung ML-451x 501x Series" and the port called "MyTCPIPPrinterPort" _PrintMgr_AddPrinter("My Printer", "Samsung ML-451x 501x Series", "MyTCPIPPrinterPort") ; Set the printer called "My Printer" as default printer _PrintMgr_SetDefaultPrinter("My Printer") ; Connect to the shared printer "\\192.168.1.1\HPDeskjetColor") _PrintMgr_AddWindowsPrinterConnection("\\192.168.1.1\HPDeskjetColor") ; List all installed printers Local $aPrinterList = _PrintMgr_EnumPrinter() _ArrayDisplay($aPrinterList) ; List all printers configuration Local $aPrinterConfig = _PrintMgr_EnumPrinterConfiguration() _ArrayDisplay($aPrinterConfig) ; List all installed printer drivers Local $aDriverList = _PrintMgr_EnumPrinterDriver() _ArrayDisplay($aDriverList) ; Retrieve the printer configuration for the printer called "Lexmark T640" $aPrinterConfig = _PrintMgr_EnumPrinterConfiguration("Lexmark T640") _ArrayDisplay($aPrinterConfig) ; Add a local printer port (for a file output) _PrintMgr_AddLocalPort("c:\temp\output.pcl") ; Remove the local port _PrintMgr_RemoveLocalPort("c:\temp\output.pcl") ; Enum a print job Local $aJobList = _PrintMgr_EnumPrintJobs() _ArrayDisplay($aJobList) EndFunc ;==>_Example Download link :
      PrintMgr_Example.au3  PrintMgr.au3
       
    • By hek
      Hey everyone,
      Was wondering how I would be able to implement this on a local computer instead of using connectserver? 
      Any suggestions or help would be appreciated. Thanks. 
    • By genius257
      I've made a library, based on AutoItObject UDF with the goal of implementing getter and setter functionality and make it possible to define new object properties in as few steps as possible.
      Thank you to @trancexx for getting me on the right track, and all users in Hooking into the IDispatch interface for the code to get me going.
      If I've forgotten to add credit, please let me know
      Example:
      #include "AutoItObject_Internal.au3" $myCar = IDispatch() $myCar.make = 'Ford' $myCar.model = 'Mustang' $myCar.year = 1969 $myCar.__defineGetter('DisplayCar', DisplayCar) Func DisplayCar($oThis) Return 'A Beautiful ' & $oThis.parent.year & ' ' & $oThis.parent.make & ' ' & $oThis.parent.model EndFunc MsgBox(0, "", $myCar.DisplayCar) More examples: https://github.com/genius257/AutoItObject-Internal/tree/master/Examples
      Version: 3.0.0
      AutoItObject_Internal.au3
      Documentation
      Edit2 (19th March 2017):
      First of all, sorry about the lack of updates on this project. I always start too many projects and end up ignoring old projects, if I run into problems ^^'.
      So I've started moving my AutoIt scripts to GitHub. I will still post the most recent script version here.
    • By nacerbaaziz
      hello autoit team
      please
      i tried to create a SPVoice object 
      when i create the object and tried to use this function SetAlertBoundary
      it gave me an error
      please where is the problem?
      here is the code
      local $o_Sapi_OBJ = ObjCreate("SAPI.SpVoice") if IsObj($o_Sapi_OBJ) then $o_Sapi_OBJ.SetAlertBoundary("SPEI_PHONEME") endIf note i got the function name from microsoft web site
       
      https://docs.microsoft.com/en-us/previous-versions/windows/desktop/ms719784(v=vs.85)
      i have windows10
×
×
  • Create New...