Jump to content
  1. FrancescoDiMuro

    FrancescoDiMuro

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AntS
      Help! The mouse clicks I'm sending to a control on a dialog box produce no response.
      The dialog box in question handles advanced display properties. The tab page my script interacts with is created by Trident Microsystems. It allows the user to enhance or attenuate the screen's RGB values. (See image.) My script automates the process of changing these in order to adjust the screen's hue or, when the red, green and blue values are all the same, the brightness.
      Producing a script to change the brightness has been quite straightforward. I use ControlClick() to send a mouse click to one of the trackbars on the right of the tab page. By default, they're linked and so move as one. The difficulty I'm having however is in automating the process when the desired red, green and blue values aren't the same as each other.
      Ordinarily, there are three ways of doing this: 
      (1) clear the Link check box to unlink the three trackbars then either click on each trackbar or drag their sliders,
      (2) clear the Link tick-box then for each colour, click on the corresponding trackbar slider (to select it) then click on a point on the graph, and
      (3) click on the Load button to open an Open dialog box and load a preset (stored as a .gam file).
      However, when ControlClick() is used to clear the Link check box or to push the Load button, nothing happens. Making the dialog box the active window makes no difference.
      The AutoIt Window Info tool indicates that the Reload a Bitmap, Save, Load and Reset buttons, the Link check box and the graph are all the same control. (See other images.) In fact, it there are only four controls on the page: the tab page, which is an instance of a SysTabControl32 class, and the three trackbars, each of which is an instance of the TridentTrackBar class. (Am unsure whether the SysTabControl32 class is a Windows or third-party control.)
      What's the solution?
      Note that the MouseClick() function—as opposed to ControlClick()—does work, but having AutoIt commandeer the screen pointer isn't an acceptable solution.
      For the sake of completeness, here's the relevant code fragment for the Link check box. 
      ;unlink trackbars WinActivate("(Multiple Monitors)") ControlClick("(Multiple Monitors)", "", 12320, "left", 1, 211, 252)  



    • By basictheprogram
      #include <Constants.au3> Func Install()    ConsoleWrite("Install EasyLog" & @LF)    Local $handle = WinWaitActive("EasyLog USB Device Driver Installer")    ConsoleWrite("Install EasyLog2 " & $handle & @LF)    Local $blah = ControlClick($handle, "", "[CLASS:Button; INSTANCE:1]", "Left", 1)    ConsoleWrite("Install EasyLog3 " & $blah & @LF)    WinClose($handle) EndFunc Install() ConsoleWrite("End of Install!" & @LF) Trying to get AutoIt to click "Install" on the EasyLogUSB Device Driver Installer window.
      Console displays:
      Install EasyLog
      Install EasyLog2 0x001B041E
      Install EasyLog3 1
      End of Install!
      Windows Info confirms the Handle is 0x001B041E

      Window Info for the Control

      For the life of me I cannot figure out why the script is not working. 
      Even $blah says the ControlClick succeeded.
      I've tried Send("{ENTER}") and MouseClick() those didn't work either.
      Any help would be appreciated.
      Thanks.
    • By AutoPM
      #RequireAdmin AutoItSetOption('MouseCoordMode', 0) If WinExists("newtitle") Then ControlClick('newtitle', '', 'Button1') EndIf a Simple script to click Button on GUI with title "newtitle". this script is working fine on my laptop on [windows 10, windows 7]
      but on a different laptop. script is not clicking this button, is there any alternative to control click then please tell. don't want to use mouseclick 
       
      Thank you
    • By tentacole
      Afternoon!
      This is my first post, so I apologize if this is in the wrong place. 
      I've created a while loop to click in a certain area of an application, and have the y axis change at the end of each loop. My loop continues to click at x:27, x:10, even though the $y is adding 15 at the end of each loop. I did a Send($x) and Send($y) into a Notepad to see if the $y had changed after each loop, and the 15 was being added to $y each loop. (If this makes sense)
       
      I'm unsure where I'm going wrong, and would be extremely grateful if someone can point me in the correct direction to fix this. 
      Local $rDirectory = "H:\oDemandProject\fList.txt" Local $rLine = _FileCountLines($rDirectory) Local $x = 27 Local $y = 10 While $rline > 0 WinActivate("OnDemand", "-> 1") WinWaitActive("OnDemand", "-> 1") ControlClick("OnDemand", "", "[CLASS:AfxFrameOrView120u; INSTANCE:1]", "left", 4, $x, $y) $y += 15 $rLine -= 1 WEnd  
    • By Yirrlaar
      #Include <WinAPI.au3> local $ClassName = _WinAPI_GetClassName(WinGetHandle(WinGetTitle("[ACTIVE]"))) ControlClick(WinGetTitle("[ACTIVE]"), "", "[CLASS:"&$ClassName&"; INSTANCE:1]", "primary") When I am running this script it just gives me a ConsoleWrite output of "0x001D04A8"
      When using "AutoIT v3 Window Info" all the info I need for the ControlClick is there and displayed perfectly as if I typed it in normally.
      Upon click the button it should be clicking it, I see the following inn the console window:
      If I replace the $ClassName with the actual ClassName of "WindowsForms10.BUTTON.app.0.3296db7_r14_ad1" it works just fine, any ideas???
×
×
  • Create New...