Jump to content

[SOLVED] How to use _Excel_RangeSort to sort my excel file


Recommended Posts

How to use _Excel_RangeSort to sort my excel file by three different headers Column A1, B1, and C1 have headers on which I want to sort by. The headers on which I want to sort are department, employee type, and name.

I still really new to AutoIt so I do not actually know how to properly start this line or lines of code, to be honest. The example code is the best I can do.

_Excel_RangeSort($OpenWorkbook, Default, "A1:C1", "1:1", $xlDescending, Default, $xlYes, Default, $xlSortRows)

I just need to sort by those three headers in that order of department, employee type, and name, plus in descending order.

 

any and all help would be greatly appreciated.  Thank you!

Edited by nooneclose
Link to post
Share on other sites
_Excel_RangeSort($oOpenWorkbook, Default, Default, "A:A", $xlDescending, Default, $xlYes, Default, Default, "B:B", $xlDescending, "C:C", $xlDescending)

Can't test at the moment but I think it should work this way :)

Edited by water

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-06-05 - Version 1.5.4.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-06-14 - Version 1.6.5.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-07-28 - Version 1.1.0.0) - Download - General Help & Support - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

It worked! well in the opposite order that I need lol :D even so it works! thank you very much. I think I can get it in the correct order now, I hope. Just need to go from Z-A to A-Z. I know I asked for descending I got them confused, I meant Ascending, my bad. 

Thanks, Water you da best. 

Edited by nooneclose
Link to post
Share on other sites

:)

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-06-05 - Version 1.5.4.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-06-14 - Version 1.6.5.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-07-28 - Version 1.1.0.0) - Download - General Help & Support - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DJ143
      I have a autoit exe file which is used in upload/browse file functionality.  This has been integrated with selenium framework and I am invoking the autoit exe using Java process and runtime. 
      Now the issue is when I run the scripts and invoke the autoit exe in local it works perfectly.  But when I use selenium grid or jenkins to run the scripts in another windows server it is not working.
      Can anyone please suggest any solution for this?
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
    • By adityaparakh
      Hello ,
      I am trying to use Websockets in AutoIt.
      It is to fetch live stock market prices , API is provided and documentation available for python language.
      The link for the code snippet is :
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Introduction
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Instruments/paths/~1instruments~1subscription/post
       
      https://github.com/symphonyfintech/xts-pythonclient-api-sdk
       
      Second Link is to subscribe to a list of ExchangeInstruments.
      Now I would like to get live stock ltp (LastTradedPrice) for a few stocks whose "ExchangeInstrumentID" I know.
      I am able to use the WinHttp object to perform actions using simple codes like below :
      I have the secretKey and appkey and can generate the needed token. And get the unique ExchangeInstrumentID.

      Below code is just for example of how I am using WinHttp. Unrelated to socket part.
      Global $InteractiveAPItoken = IniRead(@ScriptDir & "\Config.ini", "token", "InteractiveAPItoken", "NA") $baseurl = "https://brokerlink.com/interactive/" $functionurl = "orders" $oHTTP = ObjCreate("winhttp.winhttprequest.5.1") $oHTTP.Open("POST", $baseurl & $functionurl, False) $oHTTP.SetRequestHeader("Content-Type", "application/json;charset=UTF-8") $oHTTP.SetRequestHeader("authorization", $InteractiveAPItoken) $pD = '{ "exchangeSegment": "NSEFO", "exchangeInstrumentID": ' & $exchangeInstrumentID & ', "productType": "' & $producttype & '", "orderType": "MARKET", "orderSide": "' & $orderside & '", "timeInForce": "DAY", "disclosedQuantity": 0, "orderQuantity": ' & $qty & ', "limitPrice": 0, "stopPrice": 0, "orderUniqueIdentifier": "' & $orderidentifier & '"}' $oHTTP.Send($pD) $oReceived = $oHTTP.ResponseText $oStatusCode = $oHTTP.Status
          
          
      But am struggling to understand and use socket.
      Would be of great help if you can have a look at the link mentioned above and help with the code sample for AutoIt.
      To connect and listen to a socket.
      Thanks a lot
       
    • By Hermes
      Hi, I have a site that has the following elements below: 
      <div>More element here</div> <div>More element here</div> <div>More element here</div> When I do this in Auto It:
      Local $oSelectDiv = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "div") _WD_HighlightElement($sSession, $oSelectDiv, 1) I also tried to add [3], but it doesnt seems to work:
      Local $oSelectDiv = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "div[3]") _WD_HighlightElement($sSession, $oSelectDiv, 1) It always highlight the first one, but I am trying to highlight the 3rd in the list. Is there anyway to select the 3rd div without having to add any class/id in the divs, and without using XPATH? The structure of the elements in that site were built that way.
    • By meety
      My au3 script program needs administrator privileges on win10 to be executed correctly, because it needs to be added to the boot---Script code:RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", @ScriptName, "REG_SZ", @ScriptFullPath)
      I need to let the program automatically get administrator privileges, so I use a function of #RequireAdmin. Although the program can be added to the boot, but does not execute after system boot up? why is that?
      What should I do?
      --------------------------------------------------------------------
      Update:
      I found that after using the #RequireAdmin function, the program cannot be executed after system boot up.
      An example is given below. after it is compiled, it will not be executed after system boot up in the following two ways.
      1. C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp\
      2. RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", @ScriptName, "REG_SZ", @ScriptFullPath)
      why is that?
      example
      #include <MsgBoxConstants.au3>
      #RequireAdmin
      Func test()
          MsgBox(0, "", "this is test message")
      EndFunc   ;==>test
      test()
       
       
×
×
  • Create New...