Jump to content
  1. nooneclose

    nooneclose

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SC0U7
      Hello i have a text file which contain over 600KB of BASE64 strings like :
      TVqQAAMAAAAEAAAA//8AALgAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA...
      Now what i need is divide this long string as autoit variable each max lenght (4000characters per line) example:
      Local $var
      $var &=  TVqQAAMAAAAEAAA..
      $var &=  VbAmejwqqqAACEE..
      and then how to i add encrypt function on every line ? how to i can xor it? example final will be :
      $var &=  XorEnc(TVqQAAMAAAAEAAA..)
      $var &=  XorEncVbAmejwqqqAACEE..)
       
      Thanks for any help and ideas 
    • By FMS
      Hello,
      I think this is a simple question if you know the answer.
      At this function i try to  (encrypt -> decrypt -> change -> encrypt ->decrypt->check ) an array.
      This is a snippet from a larger script but the error is the same.
      I do this encrypt decrypt action so i can save some setting along the way in a file.
      But at the end (when i change the data and not when i dont change the data) is empty.
      does somebody see what i'm doing wrong here?
       
      Func test() Local $LC_timestamp = @MDAY & "." & @MON & "." & @YEAR & "_" & @HOUR & ":" & @MIN & ":" & @SEC Global $GL_USS_base_count = 4 Global $GL_USS_base[$GL_USS_base_count][2] = [["nickname", "FMS"], ["last_login", $LC_timestamp], ["login_count", "1" ], ["naam3", $LC_timestamp]] Global $encrypted_GL_USS_true[$GL_USS_base_count] Global $encrypted_GL_USS_content_true[$GL_USS_base_count] Global $GL_array_decrypted_USS_names[$GL_USS_base_count] Global $GL_array_decrypted_USS_settings[$GL_USS_base_count] MsgBox($MB_SYSTEMMODAL, "should be 1", $GL_USS_base[2][1]) ;make for $i = 0 to $GL_USS_base_count -1 $encrypted_GL_USS_true[$i] = _Crypt_EncryptData($GL_USS_base[$i][0], $GL_encr_key_settings, $CALG_AES_128) $encrypted_GL_USS_content_true[$i] = _Crypt_EncryptData($GL_USS_base[$i][1], $GL_encr_key_settings, $CALG_AES_128) Next ;get for $i = 0 to $GL_USS_base_count -1 $GL_array_decrypted_USS_names[$i] = binarytostring(_Crypt_DecryptData(binary($encrypted_GL_USS_true[$i]), $GL_encr_key_settings, $CALG_AES_128)) $GL_array_decrypted_USS_settings[$i] = binarytostring(_Crypt_DecryptData(binary($encrypted_GL_USS_content_true[$i]), $GL_encr_key_settings, $CALG_AES_128)) Next MsgBox($MB_SYSTEMMODAL, "should be 1", $GL_array_decrypted_USS_settings[2]) ;change $GL_array_decrypted_USS_settings[2] = $GL_array_decrypted_USS_settings[2] + "1" MsgBox($MB_SYSTEMMODAL, "should be 2", $GL_array_decrypted_USS_settings[2]) ;save for $i = 0 to $GL_USS_base_count -1 $encrypted_GL_USS_true[$i] = _Crypt_EncryptData($GL_array_decrypted_USS_names[$i], $GL_encr_key_settings, $CALG_AES_128) $encrypted_GL_USS_content_true[$i] = _Crypt_EncryptData($GL_array_decrypted_USS_settings[$i], $GL_encr_key_settings, $CALG_AES_128) Next ;get for $i = 0 to $GL_USS_base_count -1 $GL_array_decrypted_USS_names[$i] = binarytostring(_Crypt_DecryptData(binary($encrypted_GL_USS_true[$i]), $GL_encr_key_settings, $CALG_AES_128)) $GL_array_decrypted_USS_settings[$i] = binarytostring(_Crypt_DecryptData(binary($encrypted_GL_USS_content_true[$i]), $GL_encr_key_settings, $CALG_AES_128)) Next ;check MsgBox($MB_SYSTEMMODAL, "should be 2", $GL_array_decrypted_USS_settings[2]) ;why is this emty????? EndFunc thanks in advanced
    • By caramen
      Hello guys. 
      I totaly reworked a script to get less problem(Melba23) and i used a topic to copy an existing script and modified it. 
      Since my last post it was bad evaluated as a spam bot but by my fault since i have not explained the purpose of it corectly. (Yes i got ugly english)
       
      Then FIRST OF ALL the purpose of this script is to allow a call center to complet multiple fields in internet explorer and optionnaly; i am gonna see that after the principal code to configure multiple email that can be send. I know there is some UDF for outlook etc... but i want a single script to do all. this is the way i want to do that. 
       
      Ok this is my complete code for the moment. 
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Misc.au3> $dll = DllOpen("user32.dll") Global $EnvoyerMess1Sub1 Global $EnvoyerMess2Sub1 Global $EnvoyerMess3Sub1 Global $EnvoyerMess4Sub1 Global $EnvoyerMess5Sub1 Global $EnvoyerMess1Sub2 Global $EnvoyerMess2Sub2 Global $EnvoyerMess3Sub2 Global $EnvoyerMess4Sub2 Global $EnvoyerMess5Sub2 Global $EnvoyerMess1Sub3 Global $EnvoyerMess2Sub3 Global $EnvoyerMess3Sub3 Global $EnvoyerMess4Sub3 Global $EnvoyerMess5Sub3 Global $EnvoyerMess1Sub4 Global $EnvoyerMess2Sub4 Global $EnvoyerMess3Sub4 Global $EnvoyerMess4Sub4 Global $EnvoyerMess5Sub4 Global Const $SettingsFile = @SCRIPTDIR & '\Settings.ini' $Setting1 = IniRead ($SettingsFile, 'Stats', 'Utilisation', "ERROR") IniWrite ($SettingsFile, 'Stats', 'Utilisation',$Setting1+1) $Valeur1 = IniRead ($SettingsFile, 'NomMenu', 'Menu1', "ERROR") $Valeur2 = IniRead ($SettingsFile, 'NomMenu', 'Menu2', "ERROR") $Valeur3 = IniRead ($SettingsFile, 'NomMenu', 'Menu3', "ERROR") $Valeur4 = IniRead ($SettingsFile, 'NomMenu', 'Menu4', "ERROR") $Valeur11 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.1', "ERROR") $Valeur12 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.2', "ERROR") $Valeur13 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.3', "ERROR") $Valeur14 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.4', "ERROR") $Valeur15 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.5', "ERROR") $Valeur21 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.1', "ERROR") $Valeur22 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.2', "ERROR") $Valeur23 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.3', "ERROR") $Valeur24 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.4', "ERROR") $Valeur25 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.5', "ERROR") $Valeur31 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.1', "ERROR") $Valeur32 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.2', "ERROR") $Valeur33 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.3', "ERROR") $Valeur34 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.4', "ERROR") $Valeur35 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.5', "ERROR") $Valeur41 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.1', "ERROR") $Valeur42 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.2', "ERROR") $Valeur43 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.3', "ERROR") $Valeur44 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.4', "ERROR") $Valeur45 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.5', "ERROR") $Message11 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message12 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message13 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message14 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message15 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message21 = IniRead ($SettingsFile, 'Messages', 'Message21', "ERROR") $Message22 = IniRead ($SettingsFile, 'Messages', 'Message22', "ERROR") $Message23 = IniRead ($SettingsFile, 'Messages', 'Message23', "ERROR") $Message24 = IniRead ($SettingsFile, 'Messages', 'Message24', "ERROR") $Message25 = IniRead ($SettingsFile, 'Messages', 'Message25', "ERROR") $Message31 = IniRead ($SettingsFile, 'Messages', 'Message31', "ERROR") $Message32 = IniRead ($SettingsFile, 'Messages', 'Message32', "ERROR") $Message33 = IniRead ($SettingsFile, 'Messages', 'Message33', "ERROR") $Message34 = IniRead ($SettingsFile, 'Messages', 'Message34', "ERROR") $Message35 = IniRead ($SettingsFile, 'Messages', 'Message35', "ERROR") $Message41 = IniRead ($SettingsFile, 'Messages', 'Message41', "ERROR") $Message42 = IniRead ($SettingsFile, 'Messages', 'Message42', "ERROR") $Message43 = IniRead ($SettingsFile, 'Messages', 'Message43', "ERROR") $Message44 = IniRead ($SettingsFile, 'Messages', 'Message44', "ERROR") $Message45 = IniRead ($SettingsFile, 'Messages', 'Message45', "ERROR") BuildHiddenGUI() While 1 Sleep ( 10 ) If _IsPressed("04", $dll) Then CallCustomContextMenu() $msg = GUIGetMsg() Switch $msg ;~ ===================================================== Case $EnvoyerMess1Sub1 ;~ MouseClick("left") Send(""&$Message11) Case $EnvoyerMess2Sub1 Send(""&$Message12) Case $EnvoyerMess3Sub1 Send(""&$Message13) Case $EnvoyerMess4Sub1 Send(""&$Message14) Case $EnvoyerMess5Sub1 Send(""&$Message15) ;~ ====================================================== Case $EnvoyerMess1Sub2 Case $EnvoyerMess2Sub2 Case $EnvoyerMess3Sub2 Case $EnvoyerMess4Sub2 Case $EnvoyerMess5Sub2 ;~ ====================================================== Case $EnvoyerMess1Sub3 Case $EnvoyerMess2Sub3 Case $EnvoyerMess3Sub3 Case $EnvoyerMess4Sub3 Case $EnvoyerMess5Sub3 ;~ ======================================================= Case $EnvoyerMess1Sub4 Case $EnvoyerMess2Sub4 Case $EnvoyerMess3Sub4 Case $EnvoyerMess4Sub4 Case $EnvoyerMess5Sub4 ;~ ====================================================== Case $ConfigITEM EndSwitch WEnd DllClose($dll) Func BuildHiddenGUI() Global $Contextmenu, $msg, $GUI, $aTSR Global $SubMenu1, $folderitem, $programitem, $fileitem, $ConfigITEM, $otheritem Global $folderitem1, $folderitem2, $programitem1, $programitem2 $aTSR = _GetTotalScreenResolution() $GUI = GuiCreate("GUI Context Menu",1,1, $aTSR[0], 1,BitOR($WS_POPUP,$WS_BORDER),BitOr($WS_EX_TOPMOST,$WS_EX_TOOLWINDOW)) WinSetTrans( $GUI, '', 1) GUISetState() $Contextmenu = GUICtrlCreateContextMenu() $SubMenu1 = GUICtrlCreateMenu(""&$Valeur1, $Contextmenu) $EnvoyerMess1Sub1 = GUICtrlCreateMenuItem(""&$Valeur11, $SubMenu1) $EnvoyerMess2Sub1 = GUICtrlCreateMenuItem(""&$Valeur12, $SubMenu1) $EnvoyerMess3Sub1 = GUICtrlCreateMenuItem(""&$Valeur13, $SubMenu1) $EnvoyerMess4Sub1 = GUICtrlCreateMenuItem(""&$Valeur14, $SubMenu1) $EnvoyerMess5Sub1 = GUICtrlCreateMenuItem(""&$Valeur15, $SubMenu1) $SubMenu2 = GUICtrlCreateMenu(""&$Valeur2, $Contextmenu) $EnvoyerMess1Sub2 = GUICtrlCreateMenuItem(""&$Valeur21, $SubMenu2) $EnvoyerMess2Sub2 = GUICtrlCreateMenuItem(""&$Valeur22, $SubMenu2) $EnvoyerMess3Sub2 = GUICtrlCreateMenuItem(""&$Valeur23, $SubMenu2) $EnvoyerMess4Sub2 = GUICtrlCreateMenuItem(""&$Valeur24, $SubMenu2) $EnvoyerMess5Sub2 = GUICtrlCreateMenuItem(""&$Valeur25, $SubMenu2) $SubMenu3 = GUICtrlCreateMenu(""&$Valeur3, $Contextmenu) $EnvoyerMess1Sub3 = GUICtrlCreateMenuItem(""&$Valeur31, $SubMenu3) $EnvoyerMess2Sub3 = GUICtrlCreateMenuItem(""&$Valeur32, $SubMenu3) $EnvoyerMess3Sub3 = GUICtrlCreateMenuItem(""&$Valeur33, $SubMenu3) $EnvoyerMess4Sub3 = GUICtrlCreateMenuItem(""&$Valeur34, $SubMenu3) $EnvoyerMess5Sub3 = GUICtrlCreateMenuItem(""&$Valeur35, $SubMenu3) $SubMenu4 = GUICtrlCreateMenu(""&$Valeur4, $Contextmenu) $EnvoyerMess1Sub4 = GUICtrlCreateMenuItem(""&$Valeur41, $SubMenu4) $EnvoyerMess2Sub4 = GUICtrlCreateMenuItem(""&$Valeur42, $SubMenu4) $EnvoyerMess3Sub4 = GUICtrlCreateMenuItem(""&$Valeur43, $SubMenu4) $EnvoyerMess4Sub4 = GUICtrlCreateMenuItem(""&$Valeur44, $SubMenu4) $EnvoyerMess5Sub4 = GUICtrlCreateMenuItem(""&$Valeur45, $SubMenu4) GUICtrlCreateMenuItem("", $contextmenu) ; separator $ConfigITEM = GUICtrlCreateMenuItem("Configuration", $contextmenu) EndFunc Func CallCustomContextMenu() Local $contextmenu, $msg Global $newsubmenu, $folderitem, $programitem, $fileitem, $otheritem Global $folderitem1, $folderitem2, $programitem1, $programitem2 Local $pos Global $GUI, $aTSR WinActivate ($GUI) ControlClick ( $GUI, "", "", "right", 1, $aTSR[0], 1) EndFunc Func _GetTotalScreenResolution() Local $aRet[2], $VirtualDesktopWidth, $VirtualDesktopHeight Global Const $SM_VIRTUALWIDTH = 78 Global Const $SM_VIRTUALHEIGHT = 79 $VirtualDesktopWidth = DllCall("user32.dll", "int", "GetSystemMetrics", "int", $SM_VIRTUALWIDTH) $aRet[0] = $VirtualDesktopWidth[0] $VirtualDesktopHeight = DllCall("user32.dll", "int", "GetSystemMetrics", "int", $SM_VIRTUALHEIGHT) $aRet[1] = $VirtualDesktopHeight[0] Return $aRet EndFunc Func WinGroupActive() AutoItSetOption("WinTitleMatchMode", 4) If WinActive("classname=ExploreWClass") _ Or WinActive("classname=CabinetWClass") _ Or WinActive("classname=#32770") _ Or WinActive("classname=DV2ControlHost") _ Or WinActive("classname=MMCMainFrame") _ Or WinActive("[CLASS:Progman; Title:Program Manager]") Then Return True Else Return False EndIf EndFunc  
      By this way the script is very more clear about the purpose. When i use middle mouse click i got a context menu that apear. Then i can send the preconfigured message in the ini file that will alow me to send particular message without spending much time on it. 
      First question : 
      When i push middle click on a particular windows how to get back focus on it ??
      plz dont make attention on the declared fonction that are unused i am gonna clean that at the end. 
    • By FMS
      Hello,

      I'm having trouble whit a scipt what I'm building where this is a snippit from, and hope somebody can help me whit.
      The problem lies in when i push the "add" button i want to check if the "user" already exists.
      But the search code i build founds 2 hits when i know there is only 1 hit.
      does somebody knows what I'm doing wrong?
      thanks in advance.

      Ps. if somebody knows " if i found the right user how can i rewrite the password for him/her? " an answer to that will be most appriciated
      #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <AutoItConstants.au3> #include <Array.au3> #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <File.au3> #Include <Timers.au3> #include <Crypt.au3> #include <GuiEdit.au3> $Form1 = GUICreate("Pie", 170, 235, 190, 200) local $usernames[0] local $passwords[0] global $selectuser = GUICtrlCreateCombo("", 21, 95, 130, 20) $addusername = GUICtrlCreateButton("Add", 21, 170, 130, 30) $usernamefield = GUICtrlCreateInput("", 21, 120, 130, 20) $passwordfield = GUICtrlCreateInput("", 21, 145, 130, 20, 0x0020) func encrypt() Local $hFileOpen = FileOpen("data.srmt", $FO_APPEND) if guictrlread($usernamefield) <> "" then ;~ local $encryptedusername = string(guictrlread($usernamefield)) ;~ local $encryptedpassword = string(guictrlread($passwordfield)) local $encryptedusername = string(_Crypt_EncryptData(guictrlread($usernamefield), "P14h735536jk3fvvbg", $CALG_AES_128)) local $encryptedpassword = string(_Crypt_EncryptData(guictrlread($passwordfield ), "P14h735536jk3fvvbg", $CALG_AES_128)) Local $iCheck_hit = False ConsoleWrite (@CRLF & "##############################################"& @CRLF) if ubound($usernames)> 0 then for $i = 0 to ubound($usernames)-1 If guictrlread($usernamefield) = $usernames[$i] Then $iCheck_hit = True ConsoleWrite ( "Found! "& @CRLF & $usernames[$i] & " = " & guictrlread($usernamefield) & @CRLF & "i = " & $i & @CRLF & @CRLF) ;~ Else ;~ ConsoleWrite ( "No! "& @CRLF & $usernames[$i] & " = " & guictrlread($usernamefield) & @CRLF & "i = " & $i & @CRLF & @CRLF) EndIf next EndIf ConsoleWrite ( "##############################################"& @CRLF) If $iCheck_hit = False Then FileWrite($hFileOpen, $encryptedusername & @CRLF) FileWrite($hFileOpen, $encryptedpassword & @CRLF) EndIf EndIf FileClose($hFileOpen) EndFunc func decrypt() Local $hFileOpen = FileOpen("data.srmt", $FO_READ) ;~ consolewrite(_FileCountLines("data.srmt") & " lines in the file" & @CRLF) for $i = 1 to _FileCountLines("data.srmt")/2 local $encryptedusername = FileReadLine($hFileOpen) local $encryptedpassword = FileReadLine($hFileOpen) ;~ consolewrite($encryptedusername & @CRLF) ;~ consolewrite($encryptedpassword & @CRLF) ;~ _ArrayAdd($usernames, FileReadLine($hFileOpen)) ;~ _ArrayAdd($passwords, FileReadLine($hFileOpen)) _ArrayAdd($usernames, binarytostring(_Crypt_DecryptData(binary($encryptedusername), "P14h735536jk3fvvbg", $CALG_AES_128))) _ArrayAdd($passwords, binarytostring(_Crypt_DecryptData(binary($encryptedpassword), "P14h735536jk3fvvbg", $CALG_AES_128))) Next FileClose($hFileOpen) ;~ consolewrite(ubound($usernames) & " entries in array") ;~ _arraydisplay($usernames) if ubound($userNames)> 0 then for $i = 0 to ubound($usernames)-1 GUICtrlSetData($selectuser, $usernames[$i]) next EndIf endfunc func updatecomboandinfo() if not GUICtrlRead($usernamefield) = "" Then _ArrayAdd($usernames, GUICtrlRead($usernamefield)) _ArrayAdd($passwords, GUICtrlRead($passwordfield)) GUICtrlSetData($selectuser, $usernames[UBound($usernames)-1]) EndIf EndFunc decrypt() GUISetState(@SW_SHOW) While True $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $addusername updatecomboandinfo() encrypt() GUICtrlSetData($usernamefield, "") GUICtrlSetData($passwordfield, "") Case $selectuser if ubound($usernames)> 0 then for $i = 0 to ubound($usernames)-1 ;~ msg( "error",$array_decrypted_usernames[$i]) If $usernames[$i] = GUICtrlRead($selectuser) Then GUICtrlSetData($usernamefield, $usernames[$i]) GUICtrlSetData($passwordfield, $passwords[$i]) consolewrite("YES " & $i & " = " & $usernames[$i] & " | ctr = " & GUICtrlRead($selectuser) & @CRLF) Else ;~ msg( "error",$array_decrypted_usernames[$i]) consolewrite("NO " & $i & " = " & $usernames[$i] & " | ctr = " & GUICtrlRead($selectuser) & @CRLF) EndIf next EndIf EndSwitch WEnd  
    • By Valnurat
      Who could help me to convert this vbs to AuoIT?
      on error resume next dim oCPAppletMgr 'Control Applet manager object. dim oClientAction 'Individual client action. dim oClientActions 'A collection of client actions. 'Get the Control Panel manager object. set oCPAppletMgr=CreateObject("CPApplet.CPAppletMgr") if err.number <> 0 then Wscript.echo "Couldn't create control panel application manager" WScript.Quit end if 'Get a collection of actions. set oClientActions=oCPAppletMgr.GetClientActions if err.number<>0 then wscript.echo "Couldn't get the client actions" set oCPAppletMgr=nothing WScript.Quit end if 'Display each client action name and perform it. For Each oClientAction In oClientActions if oClientAction.Name = "Request & Evaluate Machine Policy" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Metering Usage Report Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Updates Source Scan Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Request & Evaluate User Policy" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Hardware Inventory Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Inventory Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Application Global Evaluation Task" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Updates Assignments Evaluation Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Discovery Data Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "MSI Product Source Update Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Standard File Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if next set oClientActions=nothing set oCPAppletMgr=nothing  
×
×
  • Create New...