Need help in file upload

[jayg]

Hello i am new to AutoiT,

i need help in uploading a file. 

 

if i click on <button> then it pop-ups a file explorer to select a file..

 

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form2 = GUICreate("Form2", 405, 293, 302, 218)
$Button1 = GUICtrlCreateButton("Button1", 56, 120, 265, 41)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd

 

[JLogan3o13]

@jayg you cannot possibly believe that is enough information. Please see this post for how to ask a decent question on the forum (we even put "Please read before posting" in the title!).

We need to know how you're trying to upload (FTP? HTTP? SFTP?), where you're uploading from (local system? remote system? network share? nfs mount? grandma's thumb drive?), and where you're uploading to (your own site? Google Drive? Box?). Help us help you

[jayg]

to my email address. When the file is selected it send to email

[jayg]

this email code is working for me but how i will attach the selected file is the problem

 

expandcollapse popup

#include <File.au3>

; ===============================================================================================================================
; Variables for the _INetSmtpMailCom
; ===============================================================================================================================
Global Enum _
        $g__INetSmtpMailCom_ERROR_FileNotFound = 1, _
        $g__INetSmtpMailCom_ERROR_Send, _
        $g__INetSmtpMailCom_ERROR_ObjectCreation, _
        $g__INetSmtpMailCom_ERROR_COUNTER

Global Const $g__cdoSendUsingPickup = 1 ; Send message using the local SMTP service pickup directory.
Global Const $g__cdoSendUsingPort = 2 ; Send the message using the network (SMTP over the network). Must use this to use Delivery Notification
Global Const $g__cdoAnonymous = 0 ; Do not authenticate
Global Const $g__cdoBasic = 1 ; basic (clear-text) authentication
Global Const $g__cdoNTLM = 2 ; NTLM
Global $gs_thoussep = "."
Global $gs_decsep = ","
Global $sFileOpenDialog = ""

; Delivery Status Notifications
Global Const $g__cdoDSNDefault = 0 ; None
Global Const $g__cdoDSNNever = 1 ; None
Global Const $g__cdoDSNFailure = 2 ; Failure
Global Const $g__cdoDSNSuccess = 4 ; Success
Global Const $g__cdoDSNDelay = 8 ; Delay


_Sendmail()



Func _Sendmail()
    Local $sSmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED
    Local $sFromName = "user" ; name from who the email was sent
    Local $sFromAddress = "youremail@gmail.com" ; address from where the mail should come
    Local $sToAddress = "mailreceiver@gmail.com" ; destination address of the email - REQUIRED
    Local $sSubject = "testing" ; subject from the email - can be anything you want it to be
    Local $sBody = "test" ; the messagebody from the mail - can be left blank but then you get a blank mail
    Local $sAttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
    Local $sCcAddress = "" ; address for cc - leave blank if not needed
    Local $sBccAddress = "" ; address for bcc - leave blank if not needed
    Local $sImportance = "Normal" ; Send message priority: "High", "Normal", "Low"
    Local $sUsername = "youremail@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED
    Local $sPassword = "xxxxxxx" ; password for the account used from where the mail gets sent - REQUIRED
    Local $iIPPort = 465 ; GMAIL port used for sending the mail
    Local $bSSL = True ; GMAIL enables/disables secure socket layer sending - set to True if using httpS


    Local $bIsHTMLBody = False
    Local $iDSNOptions = $g__cdoDSNDefault

    Local $rc = _INetSmtpMailCom($sSmtpServer, $sFromName, $sFromAddress, $sToAddress, $sSubject, $sBody, $sAttachFiles, $sCcAddress, $sBccAddress, $sImportance, $sUsername, $sPassword, $iIPPort, $bSSL, $bIsHTMLBody, $iDSNOptions)
    If @error Then
        MsgBox(0, "_INetSmtpMailCom(): Error sending message", _
                "Error code: " & @error & @CRLF & @CRLF & _
                "Error Hex Number: " & _INetSmtpMailCom_ErrHexNumber() & @CRLF & @CRLF & _
                "Description: " & _INetSmtpMailCom_ErrDescription() & @CRLF & @CRLF & _
                "Description (rc): " & $rc & @CRLF & @CRLF & _
                "ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() _
                )
        ConsoleWrite("### COM Error !  Number: " & _INetSmtpMailCom_ErrHexNumber() & "   ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() & "   Description:" & _INetSmtpMailCom_ErrDescription() & @LF)
    Else
        Dim $iMsgBoxAnswer
        $iMsgBoxAnswer = MsgBox(262208, "SUCCESS", ":-)", 5)
    EndIf

EndFunc   ;==>_Enviarmail



#Region UDF Functions
; The UDF
; #FUNCTION# ====================================================================================================================
; Name ..........: _INetSmtpMailCom
; Description ...:
; Syntax ........: _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress[, $s_Subject = ""[, $as_Body = ""[,
;                  $s_AttachFiles = ""[, $s_CcAddress = ""[, $s_BccAddress = ""[, $s_Importance = "Normal"[, $s_Username = ""[,
;                  $s_Password = ""[, $IPPort = 25[, $bSSL = False[, $bIsHTMLBody = False[, $iDSNOptions = $g__cdoDSNDefault]]]]]]]]]]]])
; Parameters ....: $s_SmtpServer        - A string value.
;                  $s_FromName          - A string value.
;                  $s_FromAddress       - A string value.
;                  $s_ToAddress         - A string value.
;                  $s_Subject           - [optional] A string value. Default is "".
;                  $s_Body              - [optional] A string value. Default is "".
;                  $s_AttachFiles       - [optional] A string value. Default is "".
;                  $s_CcAddress         - [optional] A string value. Default is "".
;                  $s_BccAddress        - [optional] A string value. Default is "".
;                  $s_Importance        - [optional] A string value. Default is "Normal".
;                  $s_Username          - [optional] A string value. Default is "".
;                  $s_Password          - [optional] A string value. Default is "".
;                  $IPPort              - [optional] An integer value. Default is 25.
;                  $bSSL                - [optional] A binary value. Default is False.
;                  $bIsHTMLBody         - [optional] A binary value. Default is False.
;                  $iDSNOptions         - [optional] An integer value. Default is $g__cdoDSNDefault.
; Return values .: None
; Author ........: Jos
; Modified ......: mLipok
; Remarks .......:
; Related .......: http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/
; Link ..........: http://www.autoitscript.com/forum/topic/167292-smtp-mailer-udf/
; Example .......: Yes
; ===============================================================================================================================
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $s_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $bSSL = False, $bIsHTMLBody = False, $iDSNOptions = $g__cdoDSNDefault)
    ; init Error Handler
    _INetSmtpMailCom_ErrObjInit()

    Local $objEmail = ObjCreate("CDO.Message")
    If Not IsObj($objEmail) Then Return SetError($g__INetSmtpMailCom_ERROR_ObjectCreation, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())

    ; Clear previous Err information
    _INetSmtpMailCom_ErrHexNumber(0)
    _INetSmtpMailCom_ErrDescription('')
    _INetSmtpMailCom_ErrScriptLine('')

    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress

    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject

    ; Select whether or not the content is sent as plain text or HTM
    If $bIsHTMLBody Then
        $objEmail.Textbody = $s_Body & @CRLF
    Else
        $objEmail.HTMLBody = $s_Body
    EndIf

    ; Add Attachments
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                Return SetError($g__INetSmtpMailCom_ERROR_FileNotFound, 0, 0)
            EndIf
        Next
    EndIf

    ; Set Email Configuration
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = $g__cdoSendUsingPort
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 Then $IPPort = 25
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = $g__cdoBasic
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = $bSSL

    ;Update Configuration Settings
    $objEmail.Configuration.Fields.Update

    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch

    ; Set DSN options
    If $iDSNOptions <> $g__cdoDSNDefault And $iDSNOptions <> $g__cdoDSNNever Then
        $objEmail.DSNOptions = $iDSNOptions
        $objEmail.Fields.Item("urn:schemas:mailheader:disposition-notification-to") = $s_FromAddress
;~      $objEmail.Fields.Item("urn:schemas:mailheader:return-receipt-to") = $s_FromAddress
    EndIf

    ; Update Importance and Options fields
    $objEmail.Fields.Update

    ; Sent the Message
    $objEmail.Send

    If @error Then
        _INetSmtpMailCom_ErrObjCleanUp()
        Return SetError($g__INetSmtpMailCom_ERROR_Send, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())
    EndIf

    ; CleanUp
    $objEmail = ""
    _INetSmtpMailCom_ErrObjCleanUp()

EndFunc   ;==>_INetSmtpMailCom

;
; Com Error Handler
Func _INetSmtpMailCom_ErrObjInit($bParam = Default)
    Local Static $oINetSmtpMailCom_Error = Default
    If $bParam == 'CleanUp' And $oINetSmtpMailCom_Error <> Default Then
        $oINetSmtpMailCom_Error = ''
        Return $oINetSmtpMailCom_Error
    EndIf
    If $oINetSmtpMailCom_Error = Default Then
        $oINetSmtpMailCom_Error = ObjEvent("AutoIt.Error", "_INetSmtpMailCom_ErrFunc")
    EndIf
    Return $oINetSmtpMailCom_Error
EndFunc   ;==>_INetSmtpMailCom_ErrObjInit

Func _INetSmtpMailCom_ErrObjCleanUp()
    _INetSmtpMailCom_ErrObjInit('CleanUp')
EndFunc   ;==>_INetSmtpMailCom_ErrObjCleanUp

Func _INetSmtpMailCom_ErrHexNumber($vData = Default)
    Local Static $vReturn = 0
    If $vData <> Default Then $vReturn = $vData
    Return $vReturn
EndFunc   ;==>_INetSmtpMailCom_ErrHexNumber

Func _INetSmtpMailCom_ErrDescription($sData = Default)
    Local Static $sReturn = ''
    If $sData <> Default Then $sReturn = $sData
    Return $sReturn
EndFunc   ;==>_INetSmtpMailCom_ErrDescription

Func _INetSmtpMailCom_ErrScriptLine($iData = Default)
    Local Static $iReturn = ''
    If $iData <> Default Then $iReturn = $iData
    Return $iReturn
EndFunc   ;==>_INetSmtpMailCom_ErrScriptLine

Func _INetSmtpMailCom_ErrFunc()
    _INetSmtpMailCom_ErrObjInit()
    _INetSmtpMailCom_ErrHexNumber(Hex(_INetSmtpMailCom_ErrObjInit().number, 8))
    _INetSmtpMailCom_ErrDescription(StringStripWS(_INetSmtpMailCom_ErrObjInit().description, 3))
    _INetSmtpMailCom_ErrScriptLine(_INetSmtpMailCom_ErrObjInit().ScriptLine)
    SetError(1) ; something to check for when this function returns
    Return
EndFunc   ;==>_INetSmtpMailCom_ErrFunc

#EndRegion UDF Functions

 

[KickStarter15]

@jayg,

This is my separate button attachment when I send email using Jos wonderful SMTP mailing code. Hope you can get an idea with that.

expandcollapse popup

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form2 = GUICreate("Form2", 405, 293, 302, 218)
$Button1 = GUICtrlCreateButton("Attachment", 56, 120, 265, 41)
GUICtrlSetOnEvent(-1, "AttachmentClick")
$label = GUICtrlCreateLabel("Attachment:", 60, 100, 300, 20)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
         Case $Button1
         $ScndFldr = "D:\Programs\"&@UserName&"\"
            FileDelete($ScndFldr)
         Local Const $sMessage = "Browsing file for attachment."
         DirCreate("D:\Programs\" & @UserName & "\")
         $sFilePath = "D:\Programs\" & @UserName & "\"
         Local $MyDocsFolder = "::{450D8FBA-AD25-11D0-98A8-0800361B1103}"
         Local $sFileOpenDialog = FileOpenDialog($sMessage, $MyDocsFolder, "All (*.*)")
         If @error Then
            MsgBox(8192, "", "No file(s) were selected.", $Form2)
            Return
         Else
            $sFileOpenDialog = StringReplace($sFileOpenDialog, "|", @CRLF)
            MsgBox(0, "", "You chose the following file(s):" & @CRLF & $sFileOpenDialog, 5)
            FileCopy($sFileOpenDialog, $sFilePath)
            $LogPath = $sFilePath & "*"
            Local $hSearch = FileFindFirstFile($LogPath)
            $sFileName = FileFindNextFile($hSearch)
            $labelAtt = GUICtrlCreateLabel($sFileName, 125, 100, 100, 30)
         EndIf
    EndSwitch
WEnd

 

P.S: I did not ad it in your code below coz it needs GUI, so, create a GUI and then  you can copy and paste that in the below code of whatever you like:

expandcollapse popup

#include <File.au3>

; ===============================================================================================================================
; Variables for the _INetSmtpMailCom
; ===============================================================================================================================
Global Enum _
        $g__INetSmtpMailCom_ERROR_FileNotFound = 1, _
        $g__INetSmtpMailCom_ERROR_Send, _
        $g__INetSmtpMailCom_ERROR_ObjectCreation, _
        $g__INetSmtpMailCom_ERROR_COUNTER

Global Const $g__cdoSendUsingPickup = 1 ; Send message using the local SMTP service pickup directory.
Global Const $g__cdoSendUsingPort = 2 ; Send the message using the network (SMTP over the network). Must use this to use Delivery Notification
Global Const $g__cdoAnonymous = 0 ; Do not authenticate
Global Const $g__cdoBasic = 1 ; basic (clear-text) authentication
Global Const $g__cdoNTLM = 2 ; NTLM
Global $gs_thoussep = "."
Global $gs_decsep = ","
Global $sFileOpenDialog = ""

; Delivery Status Notifications
Global Const $g__cdoDSNDefault = 0 ; None
Global Const $g__cdoDSNNever = 1 ; None
Global Const $g__cdoDSNFailure = 2 ; Failure
Global Const $g__cdoDSNSuccess = 4 ; Success
Global Const $g__cdoDSNDelay = 8 ; Delay


_Sendmail()



Func _Sendmail()
    Local $sSmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED
    Local $sFromName = "user" ; name from who the email was sent
    Local $sFromAddress = "youremail@gmail.com" ; address from where the mail should come
    Local $sToAddress = "mailreceiver@gmail.com" ; destination address of the email - REQUIRED
    Local $sSubject = "testing" ; subject from the email - can be anything you want it to be
    Local $sBody = "test" ; the messagebody from the mail - can be left blank but then you get a blank mail
    Local $sAttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
    Local $sCcAddress = "" ; address for cc - leave blank if not needed
    Local $sBccAddress = "" ; address for bcc - leave blank if not needed
    Local $sImportance = "Normal" ; Send message priority: "High", "Normal", "Low"
    Local $sUsername = "youremail@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED
    Local $sPassword = "xxxxxxx" ; password for the account used from where the mail gets sent - REQUIRED
    Local $iIPPort = 465 ; GMAIL port used for sending the mail
    Local $bSSL = True ; GMAIL enables/disables secure socket layer sending - set to True if using httpS


    Local $bIsHTMLBody = False
    Local $iDSNOptions = $g__cdoDSNDefault

    Local $rc = _INetSmtpMailCom($sSmtpServer, $sFromName, $sFromAddress, $sToAddress, $sSubject, $sBody, $sAttachFiles, $sCcAddress, $sBccAddress, $sImportance, $sUsername, $sPassword, $iIPPort, $bSSL, $bIsHTMLBody, $iDSNOptions)
    If @error Then
        MsgBox(0, "_INetSmtpMailCom(): Error sending message", _
                "Error code: " & @error & @CRLF & @CRLF & _
                "Error Hex Number: " & _INetSmtpMailCom_ErrHexNumber() & @CRLF & @CRLF & _
                "Description: " & _INetSmtpMailCom_ErrDescription() & @CRLF & @CRLF & _
                "Description (rc): " & $rc & @CRLF & @CRLF & _
                "ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() _
                )
        ConsoleWrite("### COM Error !  Number: " & _INetSmtpMailCom_ErrHexNumber() & "   ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() & "   Description:" & _INetSmtpMailCom_ErrDescription() & @LF)
    Else
        Dim $iMsgBoxAnswer
        $iMsgBoxAnswer = MsgBox(262208, "SUCCESS", ":-)", 5)
    EndIf

EndFunc   ;==>_Enviarmail



#Region UDF Functions
; The UDF
; #FUNCTION# ====================================================================================================================
; Name ..........: _INetSmtpMailCom
; Description ...:
; Syntax ........: _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress[, $s_Subject = ""[, $as_Body = ""[,
;                  $s_AttachFiles = ""[, $s_CcAddress = ""[, $s_BccAddress = ""[, $s_Importance = "Normal"[, $s_Username = ""[,
;                  $s_Password = ""[, $IPPort = 25[, $bSSL = False[, $bIsHTMLBody = False[, $iDSNOptions = $g__cdoDSNDefault]]]]]]]]]]]])
; Parameters ....: $s_SmtpServer        - A string value.
;                  $s_FromName          - A string value.
;                  $s_FromAddress       - A string value.
;                  $s_ToAddress         - A string value.
;                  $s_Subject           - [optional] A string value. Default is "".
;                  $s_Body              - [optional] A string value. Default is "".
;                  $s_AttachFiles       - [optional] A string value. Default is "".
;                  $s_CcAddress         - [optional] A string value. Default is "".
;                  $s_BccAddress        - [optional] A string value. Default is "".
;                  $s_Importance        - [optional] A string value. Default is "Normal".
;                  $s_Username          - [optional] A string value. Default is "".
;                  $s_Password          - [optional] A string value. Default is "".
;                  $IPPort              - [optional] An integer value. Default is 25.
;                  $bSSL                - [optional] A binary value. Default is False.
;                  $bIsHTMLBody         - [optional] A binary value. Default is False.
;                  $iDSNOptions         - [optional] An integer value. Default is $g__cdoDSNDefault.
; Return values .: None
; Author ........: Jos
; Modified ......: mLipok
; Remarks .......:
; Related .......: http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/
; Link ..........: http://www.autoitscript.com/forum/topic/167292-smtp-mailer-udf/
; Example .......: Yes
; ===============================================================================================================================
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $s_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $bSSL = False, $bIsHTMLBody = False, $iDSNOptions = $g__cdoDSNDefault)
    ; init Error Handler
    _INetSmtpMailCom_ErrObjInit()

    Local $objEmail = ObjCreate("CDO.Message")
    If Not IsObj($objEmail) Then Return SetError($g__INetSmtpMailCom_ERROR_ObjectCreation, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())

    ; Clear previous Err information
    _INetSmtpMailCom_ErrHexNumber(0)
    _INetSmtpMailCom_ErrDescription('')
    _INetSmtpMailCom_ErrScriptLine('')

    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress

    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject

    ; Select whether or not the content is sent as plain text or HTM
    If $bIsHTMLBody Then
        $objEmail.Textbody = $s_Body & @CRLF
    Else
        $objEmail.HTMLBody = $s_Body
    EndIf

    ; Add Attachments
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                Return SetError($g__INetSmtpMailCom_ERROR_FileNotFound, 0, 0)
            EndIf
        Next
    EndIf

    ; Set Email Configuration
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = $g__cdoSendUsingPort
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 Then $IPPort = 25
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = $g__cdoBasic
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = $bSSL

    ;Update Configuration Settings
    $objEmail.Configuration.Fields.Update

    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch

    ; Set DSN options
    If $iDSNOptions <> $g__cdoDSNDefault And $iDSNOptions <> $g__cdoDSNNever Then
        $objEmail.DSNOptions = $iDSNOptions
        $objEmail.Fields.Item("urn:schemas:mailheader:disposition-notification-to") = $s_FromAddress
;~      $objEmail.Fields.Item("urn:schemas:mailheader:return-receipt-to") = $s_FromAddress
    EndIf

    ; Update Importance and Options fields
    $objEmail.Fields.Update

    ; Sent the Message
    $objEmail.Send

    If @error Then
        _INetSmtpMailCom_ErrObjCleanUp()
        Return SetError($g__INetSmtpMailCom_ERROR_Send, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())
    EndIf

    ; CleanUp
    $objEmail = ""
    _INetSmtpMailCom_ErrObjCleanUp()

EndFunc   ;==>_INetSmtpMailCom

;
; Com Error Handler
Func _INetSmtpMailCom_ErrObjInit($bParam = Default)
    Local Static $oINetSmtpMailCom_Error = Default
    If $bParam == 'CleanUp' And $oINetSmtpMailCom_Error <> Default Then
        $oINetSmtpMailCom_Error = ''
        Return $oINetSmtpMailCom_Error
    EndIf
    If $oINetSmtpMailCom_Error = Default Then
        $oINetSmtpMailCom_Error = ObjEvent("AutoIt.Error", "_INetSmtpMailCom_ErrFunc")
    EndIf
    Return $oINetSmtpMailCom_Error
EndFunc   ;==>_INetSmtpMailCom_ErrObjInit

Func _INetSmtpMailCom_ErrObjCleanUp()
    _INetSmtpMailCom_ErrObjInit('CleanUp')
EndFunc   ;==>_INetSmtpMailCom_ErrObjCleanUp

Func _INetSmtpMailCom_ErrHexNumber($vData = Default)
    Local Static $vReturn = 0
    If $vData <> Default Then $vReturn = $vData
    Return $vReturn
EndFunc   ;==>_INetSmtpMailCom_ErrHexNumber

Func _INetSmtpMailCom_ErrDescription($sData = Default)
    Local Static $sReturn = ''
    If $sData <> Default Then $sReturn = $sData
    Return $sReturn
EndFunc   ;==>_INetSmtpMailCom_ErrDescription

Func _INetSmtpMailCom_ErrScriptLine($iData = Default)
    Local Static $iReturn = ''
    If $iData <> Default Then $iReturn = $iData
    Return $iReturn
EndFunc   ;==>_INetSmtpMailCom_ErrScriptLine

Func _INetSmtpMailCom_ErrFunc()
    _INetSmtpMailCom_ErrObjInit()
    _INetSmtpMailCom_ErrHexNumber(Hex(_INetSmtpMailCom_ErrObjInit().number, 8))
    _INetSmtpMailCom_ErrDescription(StringStripWS(_INetSmtpMailCom_ErrObjInit().description, 3))
    _INetSmtpMailCom_ErrScriptLine(_INetSmtpMailCom_ErrObjInit().ScriptLine)
    SetError(1) ; something to check for when this function returns
    Return
EndFunc   ;==>_INetSmtpMailCom_ErrFunc

#EndRegion UDF Functions