Display results of "getElementsByClassName"
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By TheDcoder
Hello, it has been a long time since I have posted here
I am working on an AutoIt project where I need to enable to user to interactively choose any point or coordinate on the screen... something like a big overlay where the user can click anywhere on the screen to select that point. @UEZ's screenshot tool may have something similar to what I need:
I just checked the source code for the tool and I see that the Mark_Area function has a part in selecting the area to screenshot, I tried to figure out how it works but it is simply too complex and long...
So I was wondering if there were any examples of interactively selecting points on a screen? Maybe an UDF that I can just use in my script to make the whole thing a matter of adding few lines
Thank you for the replies in advance!
-
By nacerbaaziz
Hi dear
I have a question
about the display language of the system
How can I get the current display language and how can I change it by autoit
Of course, if this is possible
Greetings to all and hope you help me
-
By Stormgrade
Hello,
I want to use the "_ChangeScreenResEx()" UDF for changing my display settings from 1680*1050 to 1280*800.
When I use it the display change to 1280*800 but with Intel Drivers, Scaling option change : Maintain display Scaling become Center Image.
Here my Main program
#include <.\_ChangeResolutionEx.au3> Global $Config = @ScriptDir & "\ChangeResolution.ini" Global $aSection = IniReadSectionNames($Config) Global $Moniteur,$Largeur,$Hauteur,$Profondeur,$Refresh for $i = 1 to $aSection[0] Step 1 $Moniteur = Number($i) $Largeur = Number(IniRead($Config,$i,"Width","1680")) $Hauteur = Number(IniRead($Config,$i,"Height","1050")) $Profondeur = Number(IniRead($Config,$i,"Bits","32")) $Refresh = Number(IniRead($Config,$i,"Refresh","60")) _ChangeScreenResEx($Moniteur,$Largeur,$Hauteur,$Profondeur,$Refresh) Sleep(1000) Next _ChangeScreenResEx()
#include-once ;=============================================================================== ; Function Name: _ChangeScreenResEx() ; Description: Changes the current screen geometry, colour and refresh rate. ; Version: 1.0.0.0 ; Parameter(s): $i_DisplayNum - Display to change, starting at 1 ; $i_Width - Width of the desktop screen in pixels. (horizontal resolution) ; $i_Height - Height of the desktop screen in pixels. (vertical resolution) ; $i_BitsPP - Depth of the desktop screen in bits per pixel. ; $i_RefreshRate - Refresh rate of the desktop screen in hertz. ; Requirement(s): AutoIt Beta > 3.1 ; Return Value(s): On Success - Screen is adjusted, @ERROR = 0 ; On Failure - sets @ERROR = 1 ; Forum(s): ; Author(s): Original code - psandu.ro, PartyPooper ; Modifications - bobchernow ;=============================================================================== Func _ChangeScreenResEx($i_DisplayNum = 1, $i_Width = @DesktopWidth, $i_Height = @DesktopHeight, $i_BitsPP = @DesktopDepth, $i_RefreshRate = @DesktopRefresh) Local Const $DM_PELSWIDTH = 0x00080000 Local Const $DM_PELSHEIGHT = 0x00100000 Local Const $DM_BITSPERPEL = 0x00040000 Local Const $DM_DISPLAYFREQUENCY = 0x00400000 Local Const $CDS_TEST = 0x00000002 Local Const $CDS_UPDATEREGISTRY = 0x00000001 Local Const $DISP_CHANGE_RESTART = 1 Local Const $DISP_CHANGE_SUCCESSFUL = 0 Local Const $HWND_BROADCAST = 0xffff Local Const $WM_DISPLAYCHANGE = 0x007E If $i_Width = "" Or $i_Width = -1 Then $i_Width = @DesktopWidth; default to current setting If $i_Height = "" Or $i_Height = -1 Then $i_Height = @DesktopHeight; default to current setting If $i_BitsPP = "" Or $i_BitsPP = -1 Then $i_BitsPP = @DesktopDepth; default to current setting If $i_RefreshRate = "" Or $i_RefreshRate = -1 Then $i_RefreshRate = @DesktopRefresh; default to current setting Local $DEVMODE = DllStructCreate("byte[32];int[10];byte[32];int[6]") Local $s_Display $s_Display = "\\.\Display" & $i_DisplayNum Local $B = DllCall("user32.dll", "int", "EnumDisplaySettings", "ptr", 0, "int", 0, "ptr", DllStructGetPtr($DEVMODE)) If @error Then $B = 0 SetError(1) Return $B Else $B = $B[0] EndIf If $B <> 0 Then DllStructSetData($DEVMODE, 2, BitOR($DM_PELSWIDTH, $DM_PELSHEIGHT, $DM_BITSPERPEL, $DM_DISPLAYFREQUENCY), 5) DllStructSetData($DEVMODE, 4, $i_Width, 2) DllStructSetData($DEVMODE, 4, $i_Height, 3) DllStructSetData($DEVMODE, 4, $i_BitsPP, 1) DllStructSetData($DEVMODE, 4, $i_RefreshRate, 5) $B = DllCall("user32.dll", "int", "ChangeDisplaySettingsEx","str", $s_Display, "ptr", DllStructGetPtr($DEVMODE), "hwnd", 0, "dword", $CDS_TEST, "lparam", 0) If @error Then $B = -1 Else $B = $B[0] EndIf Select Case $B = $DISP_CHANGE_RESTART $DEVMODE = "" Return 2 Case $B = $DISP_CHANGE_SUCCESSFUL DllCall("user32.dll", "int", "ChangeDisplaySettingsEx","str", $s_Display, "ptr", DllStructGetPtr($DEVMODE), "hwnd", 0, "dword", $CDS_UPDATEREGISTRY, "lparam", 0) DllCall("user32.dll", "int", "SendMessage", "hwnd", $HWND_BROADCAST, "int", $WM_DISPLAYCHANGE, _ "int", $i_BitsPP, "int", $i_Height * 2 ^ 16 + $i_Width) $DEVMODE = "" Return 1 Case Else $DEVMODE = "" SetError(1) Return $B EndSelect EndIf EndFunc;==>_ChangeScreenResEx Any idea how to get around this problem ?
thanks for your answer.
-
By FrancescoDiMuro
Hi guys! How are you? Hope you're fine
I'm trying to use SQLite for managing some data, and, I would like to display my "retrieved" data, but I'm trying to do a select from 2 table, and seems to not work properly...
What I'd like to do is retrieve data from 2 tables and display in a listview...
I tried with:
Local $aRisultato, $iRighe, $iColonne, $iRVal $iRval = _SQLite_GetTable2d($hDatabase, "SELECT * FROM Magazzino_Rockwell, Magazzino_Siemens;", $aRisultato, $iRighe, $iColonne) If $iRVal = $SQLITE_OK Then ;_SQLite_Display2DResult($aRisultato) _ArrayDisplay($aRisultato) EndIf ... but it displays a single record 41 times, and it does this thing for every record in the database...
What do you need to help me?
Thanks
EDIT:
Managed with a double If and double query like this:
$iRval = _SQLite_GetTable2d($hDatabase, "SELECT * FROM Magazzino_Rockwell;", $aRisultato, $iRighe, $iColonne) If $iRVal = $SQLITE_OK Then Local $aRisultatoRockwell = $aRisultato $iRval = _SQLite_GetTable2d($hDatabase, "SELECT * FROM Magazzino_Siemens;", $aRisultato, $iRighe, $iColonne) If $iRVal = $SQLITE_OK Then _ArrayConcatenate($aRisultato, $aRisultatoRockwell) Local $i, $sRiga, $s_LV_Item For $i = 1 To Ubound($aRisultato) - 1 $sRiga = $aRisultato[$i][0] & "|" & _ $aRisultato[$i][1] & "|" & _ $aRisultato[$i][2] & "|" & _ $aRisultato[$i][3] & "|" & _ $aRisultato[$i][4] & "|" & _ $aRisultato[$i][5] & "|" & _ $aRisultato[$i][6] & "|" & _ $aRisultato[$i][7] & "|" & _ $aRisultato[$i][8] & "|" & _ $aRisultato[$i][9] & "|" & _ $aRisultato[$i][10] & "|" & _ $aRisultato[$i][11] $s_LV_Item = GUICtrlCreateListViewItem($sRiga, $lv_Lista) Next And so, the listview is created
If anyone has another more efficient way, I'm here Thanks guys
-
By AmarokStudios
Hello all! I'm trying to figure out how to display the contents of my Microsoft Outlooks inbox inside of an AutoIt GUI.
So far, I've managed to embed it perfectly and the website looks fantastic, but whenever I click on a message in my inbox, I can't view it. I also can't create new messages or search my inbox. I figured this was probably an ActiveX or JavaScript incompatibility. Any ideas?
Local $oIE = _IECreateEmbedded() $browserObj = GUICtrlCreateObj($oIE, 20, 60, 780, 580) _IENavigate($oIE, "https://outlook.office.com/owa/#path=/mail")
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now