Jump to content
antonioj84

Powershell and autoit command line - (Moved)

Recommended Posts

I need some help with the powershell code below

#include <AutoItConstants.au3>
#include <Array.au3>
#RequireAdmin

$PS='Get-NetConnectionProfile | Where-Object { $_.NetworkCategory -match "$Public" } | Set-NetConnectionProfile -NetworkCategory Private'

$sCommands = "powershell -Command " & $PS &""
$iPID = Run(@ComSpec & " /k " & $sCommands, "", @SW_SHOW , $stdout_child)

 

Share this post


Link to post
Share on other sites

Moved to the appropriate forum.

Moderation Team


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

im assuming that when you run...

Get-NetConnectionProfile | Where-Object { $_.NetworkCategory -match "$Public" } | Set-NetConnectionProfile -NetworkCategory Private

directly into PS it performs correctly, so you probably dont need help with your powershell code.

 

put some message boxes in between each line with new variables.

so if you msgbox $sCommands does it show $PS mixing in with the proper syntax?

since you are doing stdout then msgbox $iPID to see what is getting returned.


If @error Then
    MsgBox(262192, "", @ComputerName & " slaps " & @UserName & " around a bit with a large trout!")
    EndIf

"Yeah yeah patience, how long will that take?"  -Ed Gruberman

REAL search results

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Exit
      For my next project I would like to send files with "alternate data streams" by email in ZIP format.
      I can not use any external program like 7-Zip or WinRAR. (They would fit😥)
      Who knows how to create a ZIP file with "alternate data streams" included with the Powershell command "Compress-Archive"? 
      Here a test script:  (save as "ADSTester.cmd")
      @rem Try to create a zip file with alternate data streams (ADS) included @rem Housekeeping @cls @del ADSTester.zip >nul: @RD /S /Q Extracted >nul: @del ADSTester.txt >nul: @rem End of Housekeeping echo This is the ADSTester.txt file >ADSTester.txt echo This is the ADSTester.txt:Part1 file >ADSTester.txt:Part1 echo This is the ADSTester.txt:Part2 file >ADSTester.txt:Part2 dir /r ADSTester.txt @rem See the 3 files @rem **************************************************************** @rem **************************************************************** @rem Please alter the next lines to include the alternate data streams. powershell Compress-Archive -Path .\ADSTester.txt -Update -DestinationPath ADSTester.zip powershell Expand-Archive -Path ADSTester.zip -DestinationPath .\Extracted\ dir /r Extracted\ADSTester.txt @rem Only one file left :-( pause  
    • By ur
      Which Powershell command in the PowerCLI module for VMware ESX used to interact with UI apps?
       
      When I launch any exe/any exeutable using powercli on guest VM using powercli command.
      Invoke-VMScript, I am able to run them in the background but not in the foreground.
       
      i.e., UI apps are not launching but showing the background as running in the task manager.
       
      We need our UI Automation scripts to execute in the VM, but it is not working.
       
      We are able to do in virtualbox and hyper-v but not in vmware esx using powercli.
       
      Please suggest.
    • By ambad4u
      Hello and Good Day to All!
      I am trying to install .NET 3.5 on Windows 10 x64bit via autoit (via ShellExecuteWait + PowerShell).
      If I run this line, it will runs without issues:
      ShellExecuteWait('PowerShell.exe', '-executionpolicy Bypass -File "' & @ScriptDir & '\OJP83BU523.ps1' & '"') "OJP83BU523.ps1" contains: DISM /Online /Enable-Feature /FeatureName:NetFX3 /All /Source:D:\Sources\sxs /LimitAccess
      However, since I won't know in advance the drive letter of the "sources" folder, I created a script to generate a PowerShell Script to give a correct path for it.
      With the modified script below, PowerShell only blinks and nothing happens
      ShellExecuteWait('PowerShell.exe', '-executionpolicy Bypass -File "' & @ScriptDir & '\' & $filename & '"') or
      ShellExecuteWait('PowerShell.exe', '-executionpolicy Bypass -File "' & $filename & '"')  
      I wish I know the difference with "$filename" and "\OJP83BU523.ps1" usage, as for me, it should be the same.
      Attached is my entire autoit script.
      any help is appreciated!, many thanks in advance!
      test.au3
    • By JLogan3o13
      There are a number of posts on the forum regarding use of Selenium in AutoIt. I recently had a go at using the PowerShell Selenium module, and was amazed at how easy it is. Thought I would post an example here; if anyone is interested this could probably be incorporated into AutoIt code pretty easily. 
      Pre-Req - The true star of this script is the ChroPath extension, available for Edge, Chrome and FireFox. With it installed, you just click on the element, select Inspect, and then ChroPath generates the XPath to the element for you. Here is an example based on a simple form I created on one of my sites.
      $myForm = Start-SeChrome -StartURL "http://logancomputerser.com/Appointment.html" -Maximized $firstName = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_First']" $lastName = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_Last']" $address = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_Street1']" $city = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_City']" $zip = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_Zip']" $state = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//select[@id='formElement_State']" $phoneDay = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_DaytimePhone']" $phoneNight = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_EveningPhone']" $email = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_liamE']" $user = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_48564']" $pw = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='formElement_f403c']" $submit = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='wstForm_Contact_Submit']" $reset = Find-SeElement -Driver $myForm -Timeout 30 -XPath "//input[@id='wstForm_Contact_Reset']" Send-SeKeys -Element $firstName -Keys "Joe" Send-SeKeys -Element $lastName -Keys "Blow" Send-SeKeys -Element $address -Keys "111 S. Main St." Send-SeKeys -Element $city -Keys "AnyCity" Send-SeKeys -Element $zip -Keys "90210" Send-SeKeys -Element $state -Keys "CA" Send-SeKeys -Element $phoneDay -Keys "555.867.5309" Send-SeKeys -Element $phoneNight -Keys "555.888.1212" Send-SeKeys -Element $email -Keys "1Adam12@gmail.com" Send-SeKeys -Element $user -Keys "JBlow" Send-SeKeys -Element $pw -Keys "MyPassword" Start-Sleep 1 Invoke-SeClick -Element $submit Stop-SeDriver -Driver $myForm  
      As mentioned, this is just another way to skin the cat, but I found it a pretty fast way to initiate some easy testing in Selenium, and have used it a couple of times in projects now, both straight through PowerShell and wrapped in AutoIt.
    • By TheyCallMeBacon
      Has anyone had success managing LAPS with AutoIT?  (LAPS is Microsoft's Local Admin Password Solution.)
      I am running v3.3.14.2 and Powershell 5.1.17134.858 on Windows 10 1803 build 17134.885.
      I have read the entire AutoIT Help file, all of the AD UDF scripts and supporting HTML files, and a large part of the Internet and have researched myself into paralysis.
      My company has more than one domain with two-way trusts and use LAPS on each domain.  At present, we remote in to a jump box in each domain when we need to manage a device there. I want to build a multiple-domain console that works just like the LAPS UI, but allows the user to select a domain via pull-down. 
      At this point, I can't even get the crazy thing to work on the current domain.  
      If I feed it $sComputername = 'T4211BLC1' 
      $sComputerName = GUICtrlRead($idComputerName) $iPID = Run('powershell.exe -executionpolicy bypass Get-AdmPwdPassword "' & $sComputerName & '"', "c:\", @SW_Show, $STDOUT_CHILD) ; Wait until the process has closed using the PID returned by Run. ProcessWaitClose($iPID) ; Read the Stdout stream of the PID returned by Run. While 1 $sOutput = StdoutRead($iPID) if @error then ExitLoop if $sOutput <> "" Then $sStdout = $sStdout & @CRLF & $sOutput WEnd sends this to the console:
      Get-AdmPwdPassword : The term 'Get-AdmPwdPassword' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:1 + Get-AdmPwdPassword T4211BLC1 + ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Get-AdmPwdPassword:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException But if I put this on the Windows command line:
      powershell.exe -executionpolicy bypass Get-AdmPwdPassword "T4211BLC1" ...it runs perfectly.
      ComputerName DistinguishedName Password Expiration Timestamp ------------ ----------------- -------- ---------- T4211BLC1 CN=T4211BLC1,OU=GPO Computers Testing OU,O... YQc7Cl39wFrIF5 6/10/20... So (if you're still awake),
      Why can't Powershell find 'Get-AdmPwdPassword' when called from within AutoIT? Why can't I read STDOUT? FYI - I've tried ShellExecute, and calling a .ps1 from the script, even Run('cmd /k ...) and I get the same result - Powershell doesn't recognize the cmdlet.
      Thanks in advance!!
×
×
  • Create New...