Jump to content
Tony007

Save Label Area to PNG

Recommended Posts

Hi,

is it possible to export only the area "$idOutput" with the TEXT as a PNG?

Thanks

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>

Example()

Func Example()
      Local $hGUI = GUICreate("Test", 700, 700, -1, -1)

      Local $input1 = GUICtrlCreateInput("", 10, 10, 150, 20)

      Local $idButtonStart = GUICtrlCreateButton("Start", 200, 10, 50, 30)
      Local $idButtonClear = GUICtrlCreateButton("Clear", 260, 10, 50, 30)
      Local $idButtonExport = GUICtrlCreateButton("Export", 320, 10, 50, 30)

      Local $idOutput = GUICtrlCreateLabel("TEXT", 10, 50, 500, 500, BitOR($BS_PUSHLIKE, $SS_CENTER))
      GUICtrlSetFont($idOutput, 45, 800, "", "Impact")

      GUISetState(@SW_SHOW, $hGUI)

    ; Run the GUI until the dialog is closed
      While 1
         Switch GUIGetMsg()
               Case $GUI_EVENT_CLOSE
                  ExitLoop

               Case $idButtonStart
                  $ContentInput1 = GUICtrlRead($input1)
                  GUICtrlSetData($idOutput, $ContentInput1)

               Case $idButtonClear
                  GUICtrlSetData($input1, "")
                  GUICtrlSetData($idOutput, "")

               Case $idButtonExport


         EndSwitch
      WEnd
      GUIDelete($hGUI)
      Exit
EndFunc   ;==>Example

 

Share this post


Link to post
Share on other sites
Case $idButtonExport
        $tRect = _WinAPI_GetWindowRect (ControlGetHandle($hGUI, "", $idOutput))
        $iLeft = DllStructGetData ($tRect,"left")
        $iTop = DllStructGetData ($tRect,"top")
        $iRight = DllStructGetData ($tRect,"right")
        $iBottom = DllStructGetData ($tRect,"bottom")
        _ScreenCapture_Capture ("Test.png",$iLeft, $iTop, $iRight, $iBottom)

 

Edited by Nine

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TXTechie
      Hello Everyone,
      I've developed my own GUI using AutoIt and I'm allowing users to minimize the GUI, but I also want to include some kind of timer so that it will automatically restore the GUI after something like 30 minutes or an hour. However, I also want them to be able to manually restore the GUI by clicking the application's icon in the taskbar.
      I've searched through the forums, but I'm not sure how to get started.
      Any ideas or functions to research are appreciated!
      Regards,
      TX Techie
    • By Rskm
      Hi, recently i created a GUI for some calculations in AutoIT.  The GUI has 2 tabs and on the first tab, it has few inputboxes where i use to click with mouse and start entering the inputs. i recently made some changes in the position of these textboxes. I made this by changing the autoit code file instead of making changes in KODA. Now i cannot click inside these textboxes with mouse. However, i can use TAB key to cycle through/enter input in these input boxes. what could have made the inputboxes not responding to mouseclicks. thanks
    • By TheDcoder
      Hi everyone,
      I am bit stumped as to why I am not able to set the time in the Date control
      #include <DateTimeConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> Example() Func Example() GUICreate("My GUI get date", 200, 200, 800, 200) Local $idDate = GUICtrlCreateDate("1953/04/25", 10, 10, 185, 20, $DTS_TIMEFORMAT) ; to select a specific default format Local $sStyle = "HH:mm:ss" GUICtrlSendMsg($idDate, $DTM_SETFORMATW, 0, $sStyle) ; Set time Local $iRet = GUICtrlSetData($idDate, '13:33:37') ConsoleWrite('GUICtrlSetData returned ' & ($iRet = 1 ? 'success' : 'failure') & @CRLF) GUISetState(@SW_SHOW) ; Loop until the user exits. While GUIGetMsg() <> $GUI_EVENT_CLOSE WEnd MsgBox($MB_SYSTEMMODAL, "Time", GUICtrlRead($idDate)) EndFunc ;==>Example The documentation for GUICtrlSetData clearly mentions that it uses the same format as GUICtrlRead:
      But I get failure
      What gives?
      Thanks for the help in advance!
    • By thedemons
      Introduction
      ImGui is a popular library written by ocornut, it can make awesome user interface based on directx. It is being used by many big apps/games.  The UI is nice and flexible, easy to use because of frame-by-frame drawing. So I decided to convert the entire ImGui library to AutoIt
      At first it's just an experiment, i converted some basic draw functions of imgui, compile to a dll, then using DllCall in autoit to call the functions. I was testing to see how much FPS i can get in autoit, and i was expected a low FPS, since autoit is slow. Suprisingly, the FPS turned out to be so high, it works really fast, even when drawing 1000 buttons at the same time. Features
      More than +270 functions converted from ImGui (compiled dll). Has 90% of the capability of what you can do in C++; Usable ImGuiIO and ImGuiStyle, so you can set whatever configurations you like. Preview
          
      Usage
      #include <WinAPI.au3> #include "ImGui.au3" ; Create a window Local $hwnd = _ImGui_GUICreate("AutoIt ImGui", 1024, 768) _WinAPI_ShowWindow($hwnd) ; Set style color _ImGui_StyleColorsLight() ;~ _ImGui_StyleColorsDark() Local $f_value = 5 While 1 ; when the user click close button on the window, this will return false if Not _ImGui_PeekMsg() Then Exit ; must call _ImGui_BeginFrame() _ImGui_Begin("Another window") _ImGui_Text("Hello there..") If _ImGui_Button("click me") Then $f_value = 5 _ImGui_SliderFloat("slider", $f_value, 2, 20) If _ImGui_IsItemHovered() Then _ImGui_ToolTip("what r u doing?") _ImGui_End() ; must call _ImGui_EndFrame() Wend  
      Remark
      Most of the functions were converted automatically. I haven't tested all of them yet, if some function doesn't work for you, please tell me. Still missing some features of ImGui, please tell me if you needed any. Run \tools\imgui-au3-setup.au3 to add _ImGui functions to SciTE auto-complete. Source Code
      Require: DirectX GitHub: imgui-autoit
    • By MesterPerfect
      good morning
      this is the first post here in the autoit forums
      i hope that you can help me in my problem
      i have a JSON encoded
      it a map of my forums
      where i want to make a treeview that have the same type of map
      e.g
      a system (as category)
      windows (as sub category)
      software (as an child item in the windows category)
      .....
      i don't know how to do that
      so, i know that i can do that using the json functions
      but i need your help about how we can do it as the type that i told you
      by the way i need to put the sub info for each item in an array that give me the ability to manage my items
      e.g
      can post thread
      can reply
      message cound ...
      you just give me a small example and i can continue.
      am sorry if this against the rules of the forum.
      but i realy searched a lot but i couldn't
      i hope some one give me the way.
      thank you very much in advance
       
      here is the link of json forum
      https://www.autoitscript.com/forum/topic/148114-a-non-strict-json-udf-jsmn/
      and here is my encoded json file
       
      { "tree_map": { "0": [ 1, 5, 6, 7 ], "1": [ 2 ], "2": [ 4 ], "5": [ 3 ], "6": [ 8 ], "8": [ 9, 10 ] }, "nodes": [ { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 1, "node_id": 1, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Main category", "type_data": {} }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 2, "node_name": null, "node_type_id": "Forum", "parent_node_id": 1, "title": "Main forum", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" }, { "node_id": 2, "title": "Main forum", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 4, "node_name": null, "node_type_id": "Forum", "parent_node_id": 2, "title": "my forums1", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 2, "node_id": 5, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Perfect", "type_data": {} }, { "breadcrumbs": [ { "node_id": 5, "title": "Perfect", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 2, "node_id": 3, "node_name": null, "node_type_id": "Forum", "parent_node_id": 5, "title": "ahmed", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 3, "node_id": 6, "node_name": null, "node_type_id": "Forum", "parent_node_id": 0, "title": "autoit", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 8, "node_name": null, "node_type_id": "Forum", "parent_node_id": 6, "title": "examples", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 9, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "GUI", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 31, "node_id": 10, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "windowEX", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 4, "node_id": 7, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "vbs", "type_data": {} } ] }  
×
×
  • Create New...