Jump to content

Recommended Posts

Hello, 

I have A simple question about http request. What would be the fastest way to send mupltiple http request at the same time with autoit? The only way i figured  out was to to start multiple processes. This way works fine but its not really a good way. What user would like to see 15 processes running in the background at the same time. I know multithread is also not available in autoit.

Edited by paradox109
Link to post
Share on other sites

Example multi request 10 pages website:

Local $Thread = 10
Local $oWH[$Thread]
Local $ThreadCompleted[$Thread]
Local $CheckCompleted = 0
Local $AsyncMode = True

For $i = 0 To $Thread - 1
    $oWH[$i] = ObjCreate('WinHttp.WinHttpRequest.5.1')
    $oWH[$i].Open('GET', 'http://autoitvn.com/forums/thao-luan-hoi-dap/page-' & ($i + 1), $AsyncMode)
    $oWH[$i].Send()
Next

Do
    For $i = 0 To $Thread - 1
        If $ThreadCompleted[$i] = 0 And $oWH[$i].WaitForResponse(0) = True Then ;$ThreadCompleted[$i] variable condition to prevent loop result
            ConsoleWrite('>Page ' & $i & ' completed:' & @CRLF & $oWH[$i].GetAllResponseHeaders & @CRLF)
            $ThreadCompleted[$i] = 1
            $CheckCompleted += 1
        EndIf
    Next
Until $CheckCompleted = $Thread

MsgBox(0, 'Hi', 'Completed')

This method works very fast and do not use as much CPU and RAM resources as multi process

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kingpaic
      Hello everyone I am happy to share this UDF with you which, as you may have read from the title, allows you to emulate multithreading without memory or functionality limitations.
       
      This UDF permit you to initialize different process and execute all code you want,is verry seample exciange information between Threads using this UDF.

      This system is good because allow you to execute any kind of code in backgorund or not, with no limitations.
      Sure you have to deal with the message system to turn them into commands and data exchange but it's not that complicated, anyway I'm working on it.

      Let me know for improvements...
       
       
       
       
       
      AutoThreadV3.au3 AutoitMultiThread Example.au3
    • By WhaleJesus
      #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <file.au3> ; Create Data Folder if it doesn't exist yet If FileExists(@ScriptDir & "\Data") Then Else ShellExecute(@ScriptDir) DirCreate(@ScriptDir & "\Data") EndIf ; Playlist Name & location input Global $playlistnameinput = InputBox("Playlist", "Enter The playlist name", _ "Name") Global $playlistlocationinput = InputBox("Location", "Specify where you would like the playlist folder to be stored", @ScriptDir & "\Playlists\" & $playlistnameinput) ; Create file in Data folder and other vars Global $sDataFile = @ScriptDir & "\Data\Data.txt" Global $DataHandle = FileOpen($sDataFile, 1) Global $DataFileLine = FileReadLine($sDataFile, 1) FileClose($DataFileLine) MsgBox(0, "", $DataFileLine, 10) ; Prove it exists If FileExists($sDataFile) Then _FileWriteToLine($DataHandle, $DataFileLine, $playlistnameinput, True, True) $DataFileLine += 1 _FileWriteToLine($DataHandle, 1, $DataFileLine, True) Else MsgBox($MB_SYSTEMMODAL, "Error", "File " & $sDataFile & "Does not exist") EndIf Global $sPDataFile = @ScriptDir & "\Data\" & $playlistnameinput & "_Data.txt" Global $PDataHandle = FileOpen($sPDataFile, 1) If FileExists($sPDataFile) Then _FileWriteToLine($PDataHandle, 1, $playlistnameinput, True, True) _FileWriteToLine($PDataHandle, 2, $playlistlocationinput, True, True) Else MsgBox($MB_SYSTEMMODAL, "Error", "File " & $sPDataFile & "Does not exist") EndIf _FileWriteToLine stopped working and i don't know what it is in my code that's causing this, please help
    • By DannyJ
      $sCommands1 = 'powershell.exe Get-ChildItem' $iPid = run($sCommands1   , @WorkingDir , @SW_SHOW , 0x2) $sOutput = ""  While 1     $sOutput &= StdoutRead($iPID)         If @error Then             ExitLoop         EndIf  WEnd ;~ msgbox(0, '' , $sOutput) ConsoleWrite("$sOutput") ConsoleWrite($sOutput) ConsoleWrite(@CRLF) $aOutput = stringsplit($sOutput ,@LF , 2) For $i=0 To  UBound($aOutput) - 1 Step 1     ConsoleWrite($aOutput[$i]) Next The script above reads the whole directory into a one dimensional array, but I need to work with the array, so I need to split the array into multiple dimensions.
      I have already read some forum answers here, and I have already tried these commands:
       
      Are there any way to use the $aOutput variable like in PowerShell:
      PowerShell:
      $a = Get-ChildItem $a.Mode I imagine this in AutoIt  $aOutput
      ConsoleWrite($aOutput[i].Mode) Or if I split this command into 2 dimension like:
      For $i To UBound($aOutput)-1 Step 1 ConsoleWrite($aOutput[$i][1]) ConsoleWrite($aOutput[$i][2]) Next  
    • By DannyJ
      If I run this code, it works perfectly
      $CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-ChildItem',@DesktopDir, @SW_SHOW) But this code
      $CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-RDUserSession',@DesktopDir, @SW_SHOW) I get this error:
      Get-RDUserSession : The term 'Get-RDUserSession' is not recognized as the name of a cmdlet, function, script file, or o perable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try aga in. If I try run the command Get-RDUserSession  in normal PowerShell (started from windows start menu) the command works perfectly.
      But If I run with AutoIt I get the above mentioned error .
      Any ideas?
    • By Automania
      Hi all,
      I haven't used AutoIt in more than 10 years and I am sure a lot has improved since that long time. I hope you can give me some suggestions on my approach.
      Task: I need to extract user data (for around 1700 users) from a website tool. That tool shows an output in a table on the website. However, no export feature is available and I need the data in an Excel file, such as:
      username, serial number (of a laptop), ID number (of laptop) and some more
       
      With my knowledge from 2009 I would do this:
      1) use _IEextract with each username in the url to get the whole source code of the website with the user's data summary
      2) Work with lots of regexpressions to extract each data piece, save them into variables/array
      3) Write variable values into an Excel file
      4) rinse repeat 1700 times
       
      The relevant line for step 3 looks like this:
      <td class="resultcell"><span class="new">2021-03-23 11:05:00</span></td><td class="resultcell">Hostname-1234</td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=serial%20numbers&criteria=123456">123456</a></td><td class="resultcell">0987654/td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=usernames&criteria=myusername">myusername</a> and so on.. so here it would be Hostname-1234, 0987654 and myusername that I would need to extract.

      Although this may work it does not appear very efficient and would take a while. So I am happy for an alternate approach. Preferably, without using additional exe binary files due to company policies besides AutoIt itself.
×
×
  • Create New...