Jump to content

Automatically restore AutoIt-based GUI some time after being minimized


Recommended Posts

Hello Everyone,

I've developed my own GUI using AutoIt and I'm allowing users to minimize the GUI, but I also want to include some kind of timer so that it will automatically restore the GUI after something like 30 minutes or an hour. However, I also want them to be able to manually restore the GUI by clicking the application's icon in the taskbar.

I've searched through the forums, but I'm not sure how to get started.

Any ideas or functions to research are appreciated!

Regards,

TX Techie

Edited by TXTechie
Link to post
Share on other sites
#include <GUIConstantsEx.au3>


; Create a GUI with various controls.
Global $hGUI = GUICreate("Example", 300, 100, -1, -1)
Global $idOK = GUICtrlCreateButton("OK", 10, 70, 85, 25)

; Display the GUI.
GUISetState(@SW_SHOW, $hGUI)

Global $iTimeRestoreWindowsEG_1 = 5000
Global $iTimeRestoreWindowsEG_2 = 2500
AdlibRegister("_RestoreWindows_EG_1", $iTimeRestoreWindowsEG_1)

; Loop until the user exits.
While 1
    Switch GUIGetMsg()
        Case $idOK
            MsgBox(0, "", "OK Press")
        Case $GUI_EVENT_CLOSE
            Exit
        Case $GUI_EVENT_MINIMIZE
            ConsoleWrite('$GUI_EVENT_MINIMIZE' & @CRLF)
            GUISetState(@SW_MINIMIZE, $hGUI)
            AdlibRegister("_RestoreWindows_EG_2", $iTimeRestoreWindowsEG_2)
    EndSwitch
WEnd

Func _RestoreWindows_EG_1()
    ConsoleWrite('_RestoreWindows_EG_1()' & @CRLF)
    GUISetState(@SW_RESTORE, $hGUI)
EndFunc   ;==>_RestoreWindows_EG_1


Func _RestoreWindows_EG_2()
    ConsoleWrite('_RestoreWindows_EG_2()' & @CRLF)
    GUISetState(@SW_RESTORE, $hGUI)
    AdlibUnRegister("_RestoreWindows_EG_2")
EndFunc   ;==>_RestoreWindows_EG_2

 

Regards,
 

Link to post
Share on other sites

F1

#include <GUIConstantsEx.au3>

Opt("GUIOnEventMode", 1)

; Create a GUI with various controls.
Global $hGUI = GUICreate("Example", 300, 100, -1, -1)
Global $idOK = GUICtrlCreateButton("OK", 10, 70, 85, 25)
GUICtrlSetOnEvent(-1, "OK_Pressed")
GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")
GUISetOnEvent($GUI_EVENT_MINIMIZE, "SpecialEvents")
GUISetOnEvent($GUI_EVENT_RESTORE, "SpecialEvents")
; Display the GUI.
GUISetState(@SW_SHOW, $hGUI)

Global $iTimeRestoreWindowsEG_1 = 5000
Global $iTimeRestoreWindowsEG_2 = 2500
AdlibRegister("_RestoreWindows_EG_1", $iTimeRestoreWindowsEG_1)


; Loop until the user exits.
While 1
;~  Switch GUIGetMsg()
;~      Case $idOK
;~          OK_Pressed()
;~      Case $GUI_EVENT_CLOSE
;~          ConsoleWrite('$GUI_EVENT_CLOSE' & @CRLF)
;~          Exit
;~      Case $GUI_EVENT_MINIMIZE
;~          ConsoleWrite('$GUI_EVENT_MINIMIZE' & @CRLF)
;~          GUISetState(@SW_MINIMIZE, $hGUI)
;~          AdlibRegister("_RestoreWindows_EG_2", $iTimeRestoreWindowsEG_2)
;~  EndSwitch
WEnd


Func SpecialEvents()
    Select
        Case @GUI_CtrlId = $GUI_EVENT_CLOSE
            ConsoleWrite('$GUI_EVENT_CLOSE' & @CRLF)
            Exit

        Case @GUI_CtrlId = $GUI_EVENT_MINIMIZE
            ConsoleWrite('$GUI_EVENT_MINIMIZE' & @CRLF)
            GUISetState(@SW_MINIMIZE, $hGUI)
            AdlibRegister("_RestoreWindows_EG_2", $iTimeRestoreWindowsEG_2)

        Case @GUI_CtrlId = $GUI_EVENT_RESTORE
            MsgBox(0, "Window Restored", "ID=" & @GUI_CtrlId & " WinHandle=" & @GUI_WinHandle)

    EndSelect
EndFunc   ;==>SpecialEvents

Func OK_Pressed()
    ConsoleWrite('OK_Pressed()' & @CRLF)
    MsgBox(0, "OK Pressed", "ID=" & @GUI_CtrlId & " WinHandle=" & @GUI_WinHandle & " CtrlHandle=" & @GUI_CtrlHandle)
EndFunc   ;==>OK_Pressed

Func _RestoreWindows_EG_1()
    ConsoleWrite('_RestoreWindows_EG_1()' & @CRLF)
    GUISetState(@SW_RESTORE, $hGUI)
EndFunc   ;==>_RestoreWindows_EG_1


Func _RestoreWindows_EG_2()
    ConsoleWrite('_RestoreWindows_EG_2()' & @CRLF)
    GUISetState(@SW_RESTORE, $hGUI)
    AdlibUnRegister("_RestoreWindows_EG_2")
EndFunc   ;==>_RestoreWindows_EG_2

 

Regards,
 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
    • By llssff
      My current script:
      ```
      $notepadWindow = RunWait('notepad.exe')
      ControlSend($notepadWindow, "Edit1", "", "abcde")
      WinSetState($notepadWindow, "", @SW_MINIMIZE)
      ```
      I can't seem to get these three lines to work. Its supposed to run a notepad window, then enter "abcde", followed by minimizing it. 
      Currently it just opens and nothing happens.
      What am I doing wrong here?
       
       
       
    • By CYBRIX
      So I am a person who has learned programming off the internet, without structured courses, and I'm trying to create a UI element that can be used like "GUICtrlCreate...".

      I'd like to get some kind of insight on how to improve the code of a Graph element that I have created.
      I am unfamiliar on the standards for creating such UI elements, and assume I'll get some valuable insight here.
       
      Here's some sample code: (I tried to make it look a bit less upsetting to those who know better, but be warned: not pretty.)
      #include <WinAPISys.au3> #include <WinAPI.au3> #include <WinAPIGdi.au3> #include <Array.au3> #include <WindowsConstants.au3> #include <GUIConstants.au3> Local $hWnd = GUICreate("Test", 200, 200) GUISetState(@SW_SHOW, $hWnd) Local $hGraph = _GraphStartUp($hWnd, 10, 30, 180, 180) Local $nData, $nDataMax = 1000, $hDataTimer = TimerInit() While GUIGetMsg() <> $GUI_EVENT_ClOSE If TimerDiff($hDataTimer) >= 150 Then $nData = Random(0, $nDataMax) _UpdateGraph($nData) $hDataTimer = TimerInit() EndIf Sleep(20) WEnd _GraphShutDown($hWnd, $hGraph) Exit Func _GraphStartUp($hWnd, $x, $y, $w, $h, $nUpdateTimes = 1000, $nResolution = 60) Global $hBluePen = _WinAPI_CreatePen($PS_SOLID, 2, _WinAPI_RGB(220, 0, 0)) Global $hGreyPen = _WinAPI_CreatePen($PS_DASH, 1, _WinAPI_RGB(100, 100, 100)) Global $hBlackPen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(0, 0, 0)) Global $hWhitePen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(255, 255, 255)) Global $nGraphRes = $nResolution Global $aGraphData[$nGraphRes + 1] For $i = 2 To $nGraphRes $aGraphData[$i] = 0 Next Global $hWinDC = _WinAPI_GetWindowDC($hWnd) Global $nGraphX = $x Global $nGraphY = $y Global $nGraphWidth = $w Global $nGraphHeight = $h Global $nGraphXUnit = $nGraphWidth / ($nGraphRes - 1) Global $nGraphBottomY = $nGraphY + $nGraphHeight Global $nGraphMaxX = $nGraphX + $nGraphWidth Global $aUpdateArea[4][2] = [[$nGraphX - 1, $nGraphY - 1], [$nGraphX - 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphY - 1]] Global $pUpdateAreaRgn = _WinAPI_CreatePolygonRgn($aUpdateArea) Global $pTextRect = _WinAPI_CreateRectEx($nGraphX + 1, $nGraphY + 1, $nGraphWidth / 2, $nGraphHeight / 4) Global $nGreatestValue = 1 GLobal $pGraphArea = _WinAPI_CreateRectEx($nGraphX - 7, $nGraphY - 26, $nGraphWidth + 14, $nGraphHeight + 2) Global $pDrawCall = DllCallbackRegister('_DrawGraph', 'none', '') Global $pGraphTimer = _WinAPI_SetTimer($hWnd, 567891234, $nUpdateTimes, DllCallbackGetPtr($pDrawCall)) _DrawGraph() Return $pGraphTimer EndFunc Func _DrawGraph() Global $hPen $nGreatestValue = _ArrayMax($aGraphData, 1, 1) $hPen = _WinAPI_SelectObject($hWinDC, $hWhitePen) _WinAPI_PaintRgn($hWinDC, $pUpdateAreaRgn) $hPen = _WinAPI_SelectObject($hWinDC, $hGreyPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphMaxX, $nGraphY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY + ($nGraphHeight / 2), $nGraphMaxX, $nGraphY + ($nGraphHeight / 2)) _WinAPI_DrawLine($hWinDC, $nGraphMaxX, $nGraphY, $nGraphMaxX, $nGraphBottomY) $hPen = _WinAPI_SelectObject($hWinDC, $hBluePen) For $i = 1 To $nGraphRes - 1 _WinAPI_DrawLine($hWinDC, $nGraphX + (($i - 1) * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i] / $nGreatestValue * $nGraphHeight), $nGraphX + ($i * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i + 1] / $nGreatestValue * $nGraphHeight)) Next $hPen = _WinAPI_SelectObject($hWinDC, $hBlackPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphBottomY, $nGraphMaxX, $nGraphBottomY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphX, $nGraphBottomY) _WinAPI_DrawText($hWinDC, Round($aGraphData[$nGraphRes], 2), $pTextRect, $DT_LEFT) EndFunc Func _UpdateGraph($nData) _ArrayAdd($aGraphData, $nData) _ArrayDelete($aGraphData, 1) EndFunc Func _GraphShutDown($hWnd, $pGraphTimer) _WinAPI_SelectObject($hWinDC, $hPen) _WinAPI_DeleteObject($hBlackPen) _WinAPI_DeleteObject($hGreyPen) _WinAPI_DeleteObject($hBluePen) _WinAPI_DeleteObject($hWhitePen) _WinAPI_ReleaseDC($hWnd, $hWinDC) _WinAPI_KillTimer($hWnd, $pGraphTimer) DllCallbackFree($pDrawCall) _WinAPI_RedrawWindow($hWnd, $pGraphArea) EndFunc  
    • By mLipok
      I check this snippet:
      https://www.autoitscript.com/wiki/Snippets_(_GUI_)#GUI_With_Scrollable_TabItem
      Modified them and I refactored. That's because I needed to adapt it to my needs (I'll write later).
      I thought I understood how it works.
      But I was wrong.
       
      This is my example which is showing what I want to achieve.
      #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <GuiScrollBars.au3> #include <GUIScrollbars_Ex.au3> #include <StringConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> GUIRegisterMsg($WM_VSCROLL, WM_VSCROLL) _Example() Func _Example() Local $i_Count = 30 Local $a_Options_List[$i_Count + 1] $a_Options_List[0] = $i_Count For $i = 1 To $i_Count $a_Options_List[$i] = 'Test #' & $i Next ConsoleWrite("- " & _my_gui_Wybierz('Testing', $a_Options_List) & @CRLF) EndFunc ;==>_Example Func _my_gui_Wybierz($s_Description, $a_Options_List = "", $i_Left = Default, $i_Top = Default, $i_Width = Default, $hWnd_Parent = 0) ;~ WinSetOnTop($ACROBAT_TITLE, "", $WINDOWS_NOONTOP ) If $i_Left = Default Then $i_Left = -1 If $i_Top = Default Then $i_Top = -1 If $i_Width = Default Then $i_Width = 400 #Region _my_gui_Wybierz - GUI Creation Local $i_Height = 600 Local $hWND_DateForm = GUICreate("", $i_Width, $i_Height, $i_Left, $i_Top, BitOR(0, $WS_SIZEBOX), -1, $hWnd_Parent) WinSetOnTop($hWND_DateForm, "", $WINDOWS_ONTOP) Local $hChild = GUICreate("Scroll area", $i_Width - 15, $i_Height - 40, 0, 0, $WS_POPUP, $WS_EX_MDICHILD, $hWND_DateForm) _GUIScrollBars_Init($hChild, -1) _GUIScrollBars_ShowScrollBar($hChild, $SB_HORZ, False) _GUIScrollBars_ShowScrollBar($hChild, $SB_VERT, True) ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) GUICtrlCreateLabel("", 10, 7, $i_Width - 45, 80) Local $id_Label1 = GUICtrlCreateLabel("", 10, 7 + 5, $i_Width - 45, 80 - 5) GUICtrlSetBkColor(-1, 0x88AABB) Local $a_List_of_Button_ID[$a_Options_List[0] + 1] For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 0 And $IDX_Item < 10 Then $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ $IDX_Item & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) Else $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ Chr(Asc('A') + $IDX_Item - 10) & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) EndIf Next Local $temp_var = $a_Options_List[0] Local $a_accelerators[($temp_var * 2) + 1][2] Local $i_Accelerators_Counter = 0 Local $i_Accelerator_Char1 = '' Local $i_Accelerator_Char2 = '' For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 9 Then $i_Accelerator_Char1 = Chr(Asc('A') + $IDX_Item - 10) $i_Accelerator_Char2 = Chr(Asc('a') + $IDX_Item - 10) Else $i_Accelerator_Char1 = "{NUMPAD" & $IDX_Item & "}" ;Chr(48 + $IDX_Item) $i_Accelerator_Char2 = $IDX_Item EndIf $a_accelerators[($IDX_Item * 2) - 1][0] = $i_Accelerator_Char1 $a_accelerators[($IDX_Item * 2) - 1][1] = $a_List_of_Button_ID[$IDX_Item] $a_accelerators[($IDX_Item * 2) - 1 + 1][0] = $i_Accelerator_Char2 $a_accelerators[($IDX_Item * 2) - 1 + 1][1] = $a_List_of_Button_ID[$IDX_Item] $i_Accelerators_Counter += 2 Next $a_accelerators[0][0] = $i_Accelerators_Counter GUISetAccelerators($a_accelerators, $hChild) GUICtrlSetData($id_Label1, $s_Description) GUISetState(@SW_SHOW, $hWND_DateForm) GUISetState(@SW_SHOW, $hChild) #EndRegion _my_gui_Wybierz - GUI Creation #Region - _my_gui_Wybierz - Handling messages Local $i_Selected_item = 0 Local $v_Return_Value = "" Local $a_GUI_Messages While 1 $a_GUI_Messages = GUIGetMsg($GUI_EVENT_ARRAY) If $a_GUI_Messages[0] = $GUI_EVENT_NONE Then ; do nothing ElseIf $a_GUI_Messages[1] = $hWND_DateForm Then If $a_GUI_Messages[0] = $GUI_EVENT_CLOSE Then ExitLoop ElseIf $a_GUI_Messages[1] <> $hChild Then ; .... Else For $IDX_Check = 1 To $a_Options_List[0] If $a_List_of_Button_ID[$IDX_Check] = $a_GUI_Messages[0] Then $v_Return_Value = GUICtrlRead($a_List_of_Button_ID[$IDX_Check]) $i_Selected_item = $IDX_Check $v_Return_Value = _RegExpFirstMatch($v_Return_Value, '.+?\. (.+)') ExitLoop 2 ; exit from ForNext and also from WhileWend EndIf Next EndIf WEnd #EndRegion - _my_gui_Wybierz - Handling messages GUIDelete($hChild) GUIDelete($hWND_DateForm) Return SetError(0, $i_Selected_item, $v_Return_Value) EndFunc ;==>_my_gui_Wybierz Func WM_VSCROLL($hWnd, $msg, $wParam, $lParam) #forceref $msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ; Set the position and then retrieve it. Due to adjustments ; by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Func _RegExpFirstMatch($s_Data, $s_Pattern) Local $a_Results = StringRegExp($s_Data, $s_Pattern, $STR_REGEXPARRAYGLOBALMATCH) If @error Then Return SetError(@error, @extended, '') Return SetError(0, UBound($a_Results), $a_Results[0]) EndFunc ;==>_RegExpFirstMatch  
      I have few problems with this code, and many question related to them.
      Question 1:
      How to make the Scrollbars to work ?
      I mean to scroll buttons.
      Question 2:
      Do I must to ues Child Window, or is it possible to scroll buttons without using Child Window ?
      Question 3:
      Why after uncommenting this following line:
      ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) the ScrollBar disapears ?
    • By Mo0C0w
      Hey guys!
      I just started working with the GUI yesterday and it has only brought more fun to the Autoit adventure  
      Basically I have a GUI windows that opens and based on the selection of the combo box the button will do something different. This specific scenario I am talking about the Client Update Verification  combo selection. When selected and the button is pressed my second gui window opens. As of now if I only paste comp1 or comp2 by itself it works correctly, but if I paste both, it has a fit.
      What would the correct way to do this be? Any help or examples, would be greatly appreciated! Thank you in advance
       
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Client_List.au3> #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiibox v4.kxf Global $Form1_1 = GUICreate("Plexii", 336, 419, 1548, 586) GUISetBkColor(0xFFFFFF) Global $Pic1 = GUICtrlCreatePic("C:\Users\dnoble\Pictures\plexii.jpg", 41, 0, 252, 268, BitOR($GUI_SS_DEFAULT_PIC,$SS_CENTERIMAGE)) Global $Label2 = GUICtrlCreateLabel("Select Test", 125, 280, 95, 24) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $Combo2 = GUICtrlCreateCombo("Select Test", 39, 312, 257, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "Client Update Verification|Bids") GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") Global $Button1 = GUICtrlCreateButton("Proceed", 111, 352, 129, 33) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Combo2) = "Client Update Verification" Then _Form2() ;clientupdateverification() EndSwitch WEnd Func _Form2() #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiiboxclientupdate verification.kxf $Form1_1 = GUICreate("Plexii", 336, 521, 866, 454) GUISetBkColor(0xFFFFFF) $Edit1 = GUICtrlCreateEdit("", 57, 72, 241, 345) GUICtrlSetData(-1, "Edit1") $Button1 = GUICtrlCreateButton("Execute", 95, 440, 145, 41) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Edit1) = "comp1" Then comp1() If GUICtrlRead($Edit1) = "comp2" Then comp2() EndSwitch WEnd EndFunc  

×
×
  • Create New...