Jump to content
  1. sudeepjd


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Automania
      Hi all,
      I haven't used AutoIt in more than 10 years and I am sure a lot has improved since that long time. I hope you can give me some suggestions on my approach.
      Task: I need to extract user data (for around 1700 users) from a website tool. That tool shows an output in a table on the website. However, no export feature is available and I need the data in an Excel file, such as:
      username, serial number (of a laptop), ID number (of laptop) and some more
      With my knowledge from 2009 I would do this:
      1) use _IEextract with each username in the url to get the whole source code of the website with the user's data summary
      2) Work with lots of regexpressions to extract each data piece, save them into variables/array
      3) Write variable values into an Excel file
      4) rinse repeat 1700 times
      The relevant line for step 3 looks like this:
      <td class="resultcell"><span class="new">2021-03-23 11:05:00</span></td><td class="resultcell">Hostname-1234</td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=serial%20numbers&criteria=123456">123456</a></td><td class="resultcell">0987654/td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=usernames&criteria=myusername">myusername</a> and so on.. so here it would be Hostname-1234, 0987654 and myusername that I would need to extract.

      Although this may work it does not appear very efficient and would take a while. So I am happy for an alternate approach. Preferably, without using additional exe binary files due to company policies besides AutoIt itself.
    • By SEuBo
      I am just getting started with C and C++. I have created a pretty simple C code which is calling a dll function.
      When I compile and run, I get the appropriate Output. So it works fine.

      Now I would want to transform that to AutoIt. -> I would like to call the "RfcOpenConnection" function from AutoIt - but whatever I try with DLLCall, I can not get it to work. 
      Can someone point me in the right direction? DLL, C Sourcecode and compiled exe are attached too large to be attached, so they're uploaded here: 
      Thanks a bunch!
    • By sudeepjd
      I am building an application which needs a child panel in the GUI Control that needs to be scrolled as it contains controls that extend beyond the panel height. But I also need to have the users to be able to Tab through those controls. I don't seem to be able to to both working together. 
      The Tabstops can be allowed on children by using $WS_EX_CONTROLPARENT and the Scrollbar creation using the GUIScrollBar.au3.
      If I set the $WS_EX_CONTROLPARENT it drags the entire child and does not allow the scroll, but if I remove it, the Scroll works but the tabstops don't. Please see the below sample application that can help reproduce this problem.
      #include <GUIConstants.au3> #include <GUIScrollbars.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Global $width=500, $height=500, $titel="Tabtest in Childwindow" ; create the parentwindow $mainwindow = GUICreate($titel, $width, $height, -1, -1) GUISetBkColor(0x00ffff) ; show the parentwindow GUISetState(@SW_SHOW,$mainwindow) ; check on screen sleep(1000) ; create the childwindow with the scrollbars active ->TABSTOPS Dont work $childwindo1 = GUICreate("child", 220,$height, 10 ,0,$WS_CHILD, -1 ,$mainwindow) _GUIScrollBars_Init($childwindo1, 100, 100) GUISetBkColor(0xff0000, $childwindo1) GUISetState(@SW_SHOW, $childwindo1) $input_1 = GUICtrlCreateInput("Scroll Works",10,10) $input_2 = GUICtrlCreateInput("Tab Does Not",10,40) ; create the childwindow with the scrollbars active ->TABSTOPS Work, Scroll does not because window moves $childwindo2 = GUICreate("child", 220, $height, 240 ,0,$WS_CHILD, $WS_EX_CONTROLPARENT ,$mainwindow) _GUIScrollBars_Init($childwindo2, 100, 100) GUISetBkColor(0xff0000, $childwindo2) GUISetState(@SW_SHOW, $childwindo2) $input_3 = GUICtrlCreateInput("Tab Works",10,10) $input_4 = GUICtrlCreateInput("Scroll Does Not",10,40) GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL") ; register close GUISetOnEvent($GUI_EVENT_CLOSE, "close_it",$mainwindow) ;loop While 1 Sleep(100) ; Idle around WEnd Func close_it() ; exit application GUIDelete($mainwindow) exit EndFunc $childwindo = GUICreate("child",$width,$height,0,0,$WS_CHILD,-1,$mainwindow) GUISetBkColor(0xff0000) GUISetState(@SW_SHOW,$childwindo) Func WM_VSCROLL($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam, $lParam Local $iScrollCode = BitAND($wParam, 0x0000FFFF) Local $iIndex = -1, $iCharY, $iPosY Local $iMin, $iMax, $iPage, $iPos, $iTrackPos For $x = 0 To UBound($__g_aSB_WindowInfo) - 1 If $__g_aSB_WindowInfo[$x][0] = $hWnd Then $iIndex = $x $iCharY = $__g_aSB_WindowInfo[$iIndex][3] ExitLoop EndIf Next If $iIndex = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $iMin = DllStructGetData($tSCROLLINFO, "nMin") $iMax = DllStructGetData($tSCROLLINFO, "nMax") $iPage = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $iPosY = DllStructGetData($tSCROLLINFO, "nPos") $iPos = $iPosY $iTrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $iScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $iMin) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $iMax) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos - $iPage) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos + $iPage) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iTrackPos) EndSwitch ; // Set the position and then retrieve it. Due to adjustments ; // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $iPos = DllStructGetData($tSCROLLINFO, "nPos") If ($iPos <> $iPosY) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $iCharY * ($iPosY - $iPos)) $iPosY = $iPos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL  
      Any help to get both working together is appreciated.
    • By Atrax27
      I have a webpage that I would like to Focus the Input on a particular field, which is not automatically set as the initial input.
      I want to just simply use the Send(“154xxx”) into the “Parcel” field, then Send(“{ENTER}”) without cycling through tab presses each time before getting to the correct inputbox, where number of tab press numbers might change depending on a few things (using either IE, chrome, etc). On most websites I try this with, the “Login ID” field is the first one that the cursor jumps to so all I do is just start a Send command, but here I can’t do that since it’s not the initial cursor location.
      I’ve read a few things on the forums about “_WinAPI_SetFocus” but that appears to work on AutoIT generated form fields only (see below code), I don’t know how to translate it for website use, thanks for any help!
      #include <GUIConstantsEx.au3> #Include <WinAPI.au3>   $hGUI = GUICreate("Test", 500, 500) $hInput = GUICtrlCreateInput("", 10, 10, 400, 20) GUICtrlCreateButton("Test", 10, 100, 80, 30) GUICtrlSetState(-1, $GUI_FOCUS)   GUISetState() Sleep(5000) _WinAPI_SetFocus(ControlGetHandle("Test", "", $hInput)) While 1     Switch GUIGetMsg()         Case $GUI_EVENT_CLOSE             Exit     EndSwitch WEnd  
    • By paradox109
      I have A simple question about http request. What would be the fastest way to send mupltiple http request at the same time with autoit? The only way i figured  out was to to start multiple processes. This way works fine but its not really a good way. What user would like to see 15 processes running in the background at the same time. I know multithread is also not available in autoit.
  • Create New...