UI Automation on W10 - Get all texts in a Chrome document

MarvKLM · September 20, 2021

Hi. I can't figure out why the same below example works for fine for me on W7 but it fails to show all texts in W10.

I have searched the forum and Google to see if there is something specific to the new W10 build (20H2) but i couldn't find annything. This is the original example i'm using fine in W7:

Spoiler

#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

;~ #AutoIt3Wrapper_UseX64=n ; If target application is running as 32 bit code
;~ #AutoIt3Wrapper_UseX64=y ; If target application is running as 64 bit code

#include <UIA_Constants.au3>
;#include "UIA_Functions.au3" ; Can be copied from UIASpy Includes folder
;#include "UIA_SafeArray.au3" ; Can be copied from UIASpy Includes folder
;#include "UIA_Variant.au3" ; Can be copied from UIASpy Includes folder

Opt( "MustDeclareVars", 1 )

Example1()

Func Example1()
  ; Create UI Automation object
  Local $oUIAutomation = ObjCreateInterface( $sCLSID_CUIAutomation, $sIID_IUIAutomation, $dtag_IUIAutomation )
  If Not IsObj( $oUIAutomation ) Then Return ConsoleWrite( "$oUIAutomation ERR" & @CRLF )
  ConsoleWrite( "$oUIAutomation OK" & @CRLF )

  ; Get Desktop element
  Local $pDesktop, $oDesktop
  $oUIAutomation.GetRootElement( $pDesktop )
  $oDesktop = ObjCreateInterface( $pDesktop, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oDesktop ) Then Return ConsoleWrite( "$oDesktop ERR" & @CRLF )
  ConsoleWrite( "$oDesktop OK" & @CRLF )

  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition0
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_WidgetWin_1", $pCondition0 )
  If Not $pCondition0 Then Return ConsoleWrite( "$pCondition0 ERR" & @CRLF )
  ConsoleWrite( "$pCondition0 OK" & @CRLF )

  Local $pPane1, $oPane1
  $oDesktop.FindFirst( $TreeScope_Descendants, $pCondition0, $pPane1 )
  $oPane1 = ObjCreateInterface( $pPane1, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oPane1 ) Then Return ConsoleWrite( "$oPane1 ERR" & @CRLF )
  ConsoleWrite( "$oPane1 OK" & @CRLF )

  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition1
  $oUIAutomation.CreatePropertyCondition( $UIA_ControlTypePropertyId, $UIA_TextControlTypeId, $pCondition1 )
  If Not $pCondition1 Then Return ConsoleWrite( "$pCondition1 ERR" & @CRLF )
  ConsoleWrite( "$pCondition1 OK" & @CRLF )

  #cs
  Local $pText1, $oText1
  $oPane1.FindFirst( $TreeScope_Descendants, $pCondition1, $pText1 )
  $oText1 = ObjCreateInterface( $pText1, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oText1 ) Then Return ConsoleWrite( "$oText1 ERR" & @CRLF )
  ConsoleWrite( "$oText1 OK" & @CRLF )
  #ce

  Local $pElements
  $oPane1.FindAll( $TreeScope_Descendants, $pCondition1, $pElements )

  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $oUIElementArray1, $iLength1 ; $pElements is a pointer to an UI Automation element array
  $oUIElementArray1 = ObjCreateInterFace( $pElements, $sIID_IUIAutomationElementArray, $dtag_IUIAutomationElementArray )
  $oUIElementArray1.Length( $iLength1 )
  If Not $iLength1 Then Return ConsoleWrite( "$iLength1 = 0 ERR" & @CRLF )
  ConsoleWrite( "$iLength1 = " & $iLength1 & @CRLF )

  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $pElement1, $oElement1, $sValue1
  For $i = 0 To $iLength1 - 1
    $oUIElementArray1.GetElement( $i, $pElement1 )
    $oElement1 = ObjCreateInterface( $pElement1, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
    $oElement1.GetCurrentPropertyValue( $UIA_NamePropertyId, $sValue1 )
    ConsoleWrite( "$sValue1 = " & $sValue1 & @CRLF )
  Next
EndFunc

And then I changed some of the static variables for the W10, but both fails to show all text elements.

Spoiler

#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

;~ #AutoIt3Wrapper_UseX64=n ; If target application is running as 32 bit code
;~ #AutoIt3Wrapper_UseX64=y ; If target application is running as 64 bit code

#include <UIA_Constants.au3>
;#include "UIA_Functions.au3" ; Can be copied from UIASpy Includes folder
;#include "UIA_SafeArray.au3" ; Can be copied from UIASpy Includes folder
;#include "UIA_Variant.au3" ; Can be copied from UIASpy Includes folder

Opt( "MustDeclareVars", 1 )

Example2()

Func Example2()
  ; Create UI Automation object
  Local $oUIAutomation = ObjCreateInterface( $sCLSID_CUIAutomation8, $sIID_IUIAutomation6, $dtag_IUIAutomation6 )
  If Not IsObj( $oUIAutomation ) Then Return ConsoleWrite( "$oUIAutomation ERR" & @CRLF )
  ConsoleWrite( "$oUIAutomation OK" & @CRLF )

  ; Get Desktop element
  Local $pDesktop, $oDesktop
  $oUIAutomation.GetRootElement( $pDesktop )
  $oDesktop = ObjCreateInterface( $pDesktop, $sIID_IUIAutomationElement9, $dtag_IUIAutomationElement9 )
  If Not IsObj( $oDesktop ) Then Return ConsoleWrite( "$oDesktop ERR" & @CRLF )
  ConsoleWrite( "$oDesktop OK" & @CRLF )

  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition0
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_WidgetWin_1", $pCondition0 )
  If Not $pCondition0 Then Return ConsoleWrite( "$pCondition0 ERR" & @CRLF )
  ConsoleWrite( "$pCondition0 OK" & @CRLF )

  Local $pPane1, $oPane1
  $oDesktop.FindFirst( $TreeScope_Descendants, $pCondition0, $pPane1 )
  $oPane1 = ObjCreateInterface( $pPane1, $sIID_IUIAutomationElement9, $dtag_IUIAutomationElement9 )
  If Not IsObj( $oPane1 ) Then Return ConsoleWrite( "$oPane1 ERR" & @CRLF )
  ConsoleWrite( "$oPane1 OK" & @CRLF )

  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition1
  $oUIAutomation.CreatePropertyCondition( $UIA_ControlTypePropertyId, $UIA_TextControlTypeId, $pCondition1 )
  If Not $pCondition1 Then Return ConsoleWrite( "$pCondition1 ERR" & @CRLF )
  ConsoleWrite( "$pCondition1 OK" & @CRLF )

  #cs
  Local $pText1, $oText1
  $oPane1.FindFirst( $TreeScope_Descendants, $pCondition1, $pText1 )
  $oText1 = ObjCreateInterface( $pText1, $sIID_IUIAutomationElement9, $dtag_IUIAutomationElement9 )
  If Not IsObj( $oText1 ) Then Return ConsoleWrite( "$oText1 ERR" & @CRLF )
  ConsoleWrite( "$oText1 OK" & @CRLF )
  #ce

  Local $pElements
  $oPane1.FindAll( $TreeScope_Descendants, $pCondition1, $pElements )

  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $oUIElementArray1, $iLength1 ; $pElements is a pointer to an UI Automation element array
  $oUIElementArray1 = ObjCreateInterFace( $pElements, $sIID_IUIAutomationElementArray, $dtag_IUIAutomationElementArray )
  $oUIElementArray1.Length( $iLength1 )
  If Not $iLength1 Then Return ConsoleWrite( "$iLength1 = 0 ERR" & @CRLF )
  ConsoleWrite( "$iLength1 = " & $iLength1 & @CRLF )

  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $pElement1, $oElement1, $sValue1
  For $i = 0 To $iLength1 - 1
    $oUIElementArray1.GetElement( $i, $pElement1 )
    $oElement1 = ObjCreateInterface( $pElement1, $sIID_IUIAutomationElement9, $dtag_IUIAutomationElement9 )
    $oElement1.GetCurrentPropertyValue( $UIA_NamePropertyId, $sValue1 )
    ConsoleWrite( "$sValue1 = " & $sValue1 & @CRLF )
  Next
EndFunc

Things I've tried: #RequireAdmin | No AV | Exec as Adm | Change Chrome compatibility on W10 |

On W7, for example, inspecting the top of this page, Browse shows HyperlinkControl and TextControl:

Now on W10, there are some changes. Custom Control changes to Group and no text.

*I'm using the Browse link here as an example where it shows two controls in W7, my intention is to find all text (TextControl). Using the above snippet there many other plain texts in W10 missing, that shows on W7. Using UIASpy in Chrome - W10, I can see the TextControl of the "missing" elements but I can't find them using the above FindAll method.

junkew · September 21, 2021

Check first within chrome (versions, 32/64 bits)

Check chrome://accessibility/ and see the trees as you then should see the same in UIA spy

Check with inspect.exe as thats the original MS tool for spying uia

LarsJ · September 21, 2021

junkew, Have you tried the 3 options for checking things out yourself. In that case, you would have seen that MarvKLM is completely right. The controls are different in Windows 7 and 10. This applies to both UIASpy and Inspect.exe.

I've no idea the reason for the differences. I've made a note of the issue and will investigate it further on occasion. But it'll not be right now because I'm working on other projects.

MarvKLM · September 21, 2021

Hi @junkew and @LarsJ, first thanks for the help. Answering junkew questions:

Both machines with W7 and W10 OS and Chrome are x64 versions. Compiling the script in x64 does not change anything.
On both cases (W7 and W10) Chrome does show the ROLE_SYSTEM_STATICTEXT looking in the accessibility tree.
Inspect and UIASpy shows the same results.

Some additional information: W10 new install, no AV, no other software, just Chrome x64.

What I noticed is that both Inspect and UIASpy on W10 can detect elements that are text only, but not all of them appear immediately in the inspection box, to find some elements it is necessary to manually search the tree to find them. Example: If you inspect at the top of this page for the text element of "Home > AutoIt v3 > AutoIt Help and Support > AutoIt General Help and Support > UI Automation on W10 - Get all texts in a Chrome document", it will show on both tools. But if yout try to find (hovering the mouse) the topic title (UI Automation on W10 - Get all texts in a Chrome document) right under the links paths of the forum, the element does not show on the right side of the inspecting tool, but it's possible to find it manually.

Now other elements that should have two attributes like for example a link (HyperlinkControl and TextControl) in W10 are only shown the first one, although the element (Static Text) is appearing in the Chrome accessibility tree.

I know you guys are busy, whenever you can help me, that's great. Thanks in advance.

junkew · September 22, 2021

I did not observe it myself yet but the basics are first to see within Chrome if the trees are equal on both platforms. If they are equal you the issue is MS otherwise its google chromium.

Maybe check if same issue on ms edge.

LarsJ · September 22, 2021

I've searched a bit for information about the issue but have not really managed to find anything. It seems strange as Google is a huge company and Chrome is one of the most used browsers.

MarvKLM · September 22, 2021

@junkew the Chrome trees are equal on both platforms. Now on Edge W10 the example attribute of "Browse" shows both HyperlinkControl and TextControl:

Spoiler

But I still can't find it using FindAll (TextControl) on Edge W10. And I have no idea why they change the control name to Group or why Chrome only shows one attribute.

@LarsJ I wasn't able to find anything either. Do you get the same fail FindAll results on W10 21H2?

junkew · September 23, 2021

I do not have a W7 around but can see in W10 the same as you see which is in my opinion correct a link WITHOUT a text.

the text you can get from the link and in the HTML there is no subtag with specific text

Can you inspect the html that is shown on both W7 and W10

When I look at the html its only showing a hyperlink no textbox

<a href="https://www.autoitscript.com/forum/" data-navitem-id="1" data-navdefault="" data-active="true">
                    Browse<span class="ipsNavBar_active__identifier"></span>
</a>

Check what NVDA and Narrator is recognizing (but I assume that will be exactly same as what you are seeing)
Did behavior change when upgrading from W10 to W10 21H2 or is it behaviour you see changed going from W7 to W10

LarsJ · September 23, 2021

Assuming that this change in the UI Automation control structure is a consequence of updates in the latest versions of Chrome (i.e. not a real error), then it means, among other things, that it's not possible to find all texts in a document, simply by looking for controls of type $UIA_TextControlTypeId.

Instead, you can traverse all elements of the document and print all valid $UIA_NamePropertyIds. This is done in UIASpy when generating the entire element structure of a window. See here how to do it.

MarvKLM · September 25, 2021

Hi. Sorry for the delay. @junkew let me answer your questions:

The same HTML code for W7 and W10. This is is not just an hyperlink, because this is a text that was hyperlinked (ie. <a> attribute and the text "Browse" [javascript:var a = document.querySelector("#elNavSecondary_1 > a");alert(a.textContent);]). Also, as I said before, the tree shows the attribute STATICTEXT for all hyperlinks correctly. I only used "Browse" hyperlink as an example. The real problem is that FindAll method is not even showing the pure texts of the document. Look at the bellow image, you will see that there are two texts (same content because it's the topic title). FindAll only shows the first text, not the second. I think this could be a MS issue.

On 9/23/2021 at 4:21 AM, junkew said:

Did behavior change when upgrading from W10 to W10 21H2 or is it behaviour you see changed going from W7 to W10

I have two machines, one older with W7 (everything working properly) and a new Notebook that came with W10 21H2. So I can't compare with older versions of W10 to know if there is a problem with the new W10 build 21H2.

@LarsJ I think that this is some MS bug, because if I try to traverse all elements (in my case using FindAll and TextControl types only) of the document and print all valid $UIA_NamePropertyIds, it will fail to find the second Text (and it's just a text, there are no other control property), as I pointed in the above image example. UIASpy uses FindAll or TreeWalker? I have always used FindAll, because the function returns only control elements. The strange is even if I try to find the specific Text element using ($oUIAutomation.CreatePropertyCondition( $UIA_NamePropertyId, "TEXT", $pCondition )) it fails. This is what I see in W10 using UIASpy, if I use FindAll I only see the first title, the second I can't find using it's name $UIA_NamePropertyId or FindAll (I know that in this example case the texts are dupes, but I manually edit the HTML and changed them to be unique for testing purpose).

junkew · September 26, 2021

Getting an object from a mouse position is allways tricky certainly with html where it can completely be rendered in a "weird" way.

Suggestion to use findall with a property true condition so it will find all. Use subtree.

Its most likely there as certainly inspect and uiaspy are showing you that. They are just in different parts of the hierarchy.

When I use simplespy and create below code I can see it gets dumped (you probably have to set some things in UIA.CFG file)

;~ *** Standard code maintainable ***
#include "UIAWrappers.au3"
AutoItSetOption("MustDeclareVars", 1)

_UIA_setVar("oP1","Title:=UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums - Google Chrome;controltype:=UIA_PaneControlTypeId;class:=Chrome_WidgetWin_1")    ;UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums - Google Chrome
_UIA_setVar("oP2","Title:=UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums;controltype:=UIA_DocumentControlTypeId;class:=Chrome_RenderWidgetHostHWND")   ;UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums
_UIA_setVar("oP3","Title:=;controltype:=UIA_GroupControlTypeId;class:=")    ;
_UIA_setVar("oP4","Title:=;controltype:=UIA_GroupControlTypeId;class:=")    ;
_UIA_setVar("oP5","Title:=;controltype:=UIA_TableControlTypeId;class:=")    ;
_UIA_setVar("oP6","Title:=;controltype:=UIA_GroupControlTypeId;class:=")    ;
_UIA_setVar("oP7","Title:=;controltype:=UIA_GroupControlTypeId;class:=")    ;
_UIA_setVar("oP8","Title:=;controltype:=UIA_GroupControlTypeId;class:=")    ;

;~ $oUIElement=_UIA_getObjectByFindAll("MarvKLM.mainwindow", "title:=MarvKLM;ControlType:=UIA_HyperlinkControlTypeId", $treescope_subtree)
_UIA_setVar("oUIElement","Title:=UI Automation on W10;index:=4")

;~ Actions split away from logical/technical definition above can come from configfiles

_UIA_Action("oP1","highlight")
_UIA_Action("oP1","setfocus")
_UIA_Action("oP2","highlight")
_UIA_Action("oP2","setfocus")
_UIA_Action("oP3","highlight")
_UIA_Action("oP3","setfocus")
_UIA_Action("oP4","highlight")
_UIA_Action("oP4","setfocus")
_UIA_Action("oP5","highlight")
;~ _UIA_Action("oP5","setfocus")
;~ _UIA_Action("oP6","highlight")
;~ _UIA_Action("oP6","setfocus")
;~ _UIA_Action("oP7","highlight")
;~ _UIA_Action("oP7","setfocus")
;~_UIA_Action("oP8","highlight")
_UIA_Action("oP5","dumpthemall")

_UIA_action("oUIElement","highlight")
;~_UIA_action("oUIElement","click")

junkew · September 26, 2021

You have to find the document not the chrome window

Local $pConditionDoc
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_RenderWidgetHostHWND", $pConditionDoc)
  If Not $pConditionDoc Then Return ConsoleWrite( "$pConditionDoc ERR" & @CRLF )
  ConsoleWrite( "$pConditionDoc OK" & @CRLF )

  Local $pDocument, $oDocument
 $oPane1.FindFirst( $TreeScope_Descendants, $pConditionDoc, $pDocument )
  $oDocument = ObjCreateInterface( $pDocument, $sIID_IUIAutomationElement, $dtagIUIAutomationElement )
  If Not IsObj( $oDocument ) Then Return ConsoleWrite( "$oDocument ERR" & @CRLF )
  ConsoleWrite( "$oDocument OK" & @CRLF )

  _UIA_Highlight($oDocument)

and then findall on the document

$oDocument.FindAll( $TreeScope_Subtree, $pCondition1, $pElements )

My full example (but its based on uiawrappers similar but a little different library)

;~ *** Standard code maintainable ***
#include "UIAWrappers.au3"
AutoItSetOption("MustDeclareVars", 1)


Example1()

Func Example1()
  ; Create UI Automation object
  Local $oUIAutomation = ObjCreateInterface( $sCLSID_CUIAutomation, $sIID_IUIAutomation, $dtagIUIAutomation )
  If Not IsObj( $oUIAutomation ) Then Return ConsoleWrite( "$oUIAutomation ERR" & @CRLF )
  ConsoleWrite( "$oUIAutomation OK" & @CRLF )

  ; Get Desktop element
  Local $pDesktop, $oDesktop
  $oUIAutomation.GetRootElement( $pDesktop )
  $oDesktop = ObjCreateInterface( $pDesktop, $sIID_IUIAutomationElement, $dtagIUIAutomationElement )
  If Not IsObj( $oDesktop ) Then Return ConsoleWrite( "$oDesktop ERR" & @CRLF )
  ConsoleWrite( "$oDesktop OK" & @CRLF )

  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition0
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_WidgetWin_1", $pCondition0 )
  If Not $pCondition0 Then Return ConsoleWrite( "$pCondition0 ERR" & @CRLF )
  ConsoleWrite( "$pCondition0 OK" & @CRLF )

  Local $pPane1, $oPane1
  $oDesktop.FindFirst( $TreeScope_Descendants, $pCondition0, $pPane1 )
  $oPane1 = ObjCreateInterface( $pPane1, $sIID_IUIAutomationElement, $dtagIUIAutomationElement )
  If Not IsObj( $oPane1 ) Then Return ConsoleWrite( "$oPane1 ERR" & @CRLF )
  ConsoleWrite( "$oPane1 OK" & @CRLF )

  Local $pConditionDoc
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_RenderWidgetHostHWND", $pConditionDoc)
  If Not $pConditionDoc Then Return ConsoleWrite( "$pConditionDoc ERR" & @CRLF )
  ConsoleWrite( "$pConditionDoc OK" & @CRLF )

  Local $pDocument, $oDocument
 $oPane1.FindFirst( $TreeScope_Descendants, $pConditionDoc, $pDocument )
  $oDocument = ObjCreateInterface( $pDocument, $sIID_IUIAutomationElement, $dtagIUIAutomationElement )
  If Not IsObj( $oDocument ) Then Return ConsoleWrite( "$oDocument ERR" & @CRLF )
  ConsoleWrite( "$oDocument OK" & @CRLF )

  _UIA_Highlight($oDocument)
  ; --- Find window/control ---

  ConsoleWrite( "--- Find window/control ---" & @CRLF )

  Local $pCondition1
  $oUIAutomation.CreatePropertyCondition( $UIA_ControlTypePropertyId, $UIA_TextControlTypeId, $pCondition1 )
  If Not $pCondition1 Then Return ConsoleWrite( "$pCondition1 ERR" & @CRLF )
  ConsoleWrite( "$pCondition1 OK" & @CRLF )

  #cs
  Local $pText1, $oText1
  $oPane1.FindFirst( $TreeScope_Descendants, $pCondition1, $pText1 )
  $oText1 = ObjCreateInterface( $pText1, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oText1 ) Then Return ConsoleWrite( "$oText1 ERR" & @CRLF )
  ConsoleWrite( "$oText1 OK" & @CRLF )
  #ce

  Local $pElements
  $oDocument.FindAll( $TreeScope_Subtree, $pCondition1, $pElements )



  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $oUIElementArray1, $iLength1 ; $pElements is a pointer to an UI Automation element array
  $oUIElementArray1 = ObjCreateInterFace( $pElements, $sIID_IUIAutomationElementArray, $dtagIUIAutomationElementArray )
  $oUIElementArray1.Length( $iLength1 )
  If Not $iLength1 Then Return ConsoleWrite( "$iLength1 = 0 ERR" & @CRLF )
  ConsoleWrite( "$iLength1 = " & $iLength1 & @CRLF )

  ; --- Code Snippets ---

  ConsoleWrite( "--- Code Snippets ---" & @CRLF )

  Local $pElement1, $oElement1, $sValue1

  For $i = 0 To $iLength1 - 1
    $oUIElementArray1.GetElement( $i, $pElement1 )
    $oElement1 = ObjCreateInterface( $pElement1, $sIID_IUIAutomationElement, $dtagIUIAutomationElement )
    $oElement1.GetCurrentPropertyValue( $UIA_NamePropertyId, $sValue1 )
    if stringinstr($sValue1,"UI Automation on W10") > 0 then
        ConsoleWrite( $i & "$sValue1 = " & $sValue1 & @CRLF )
    EndIf
    Next
EndFunc

output

>Running:(3.3.14.5):C:\Program Files (x86)\AutoIt3\autoit3_x64.exe "C:\Users\xxxx\Documents\UIA\uiatest.au3"    
--> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop
$oUIAutomation OK
$oDesktop OK
--- Find window/control ---
$pCondition0 OK
$oPane1 OK
$pConditionDoc OK
$oDocument OK
--- Find window/control ---
$pCondition1 OK
--- Code Snippets ---
$iLength1 = 1188
--- Code Snippets ---
8$sValue1 = UI Automation on W10 - Get all texts in a Chrome document
630$sValue1 = UI Automation on W10 - Get all texts in a Chrome document
632$sValue1 = UI Automation on W10 - Get all texts in a Chrome document
876$sValue1 = "Title:=UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums - Google Chrome;controltype:=UIA_PaneControlTypeId;class:=Chrome_WidgetWin_1"
918$sValue1 = "Title:=UI Automation on W10 - Get all texts in a Chrome document - AutoIt General Help and Support - AutoIt Forums;controltype:=UIA_DocumentControlTypeId;class:=Chrome_RenderWidgetHostHWND"
1015$sValue1 = "Title:=UI Automation on W10;index:=4"
1185$sValue1 = UI Automation on W10 - Get all texts in a Chrome document
+>19:10:38 AutoIt3.exe ended.rc:0
+>19:10:38 AutoIt3Wrapper Finished.
>Exit code: 0    Time: 4.689

MarvKLM · September 26, 2021

Hi @junkew, thanks for taking your time to make a code example. Unfortunately the results on W10 are still the same, does not matter if I use Document or Pane with FindAll. And based on your example output you have the same bug. Look at "8$sValue1 = UI Automation on W10 - Get all texts in a Chrome document" the 9$ should be the next element to be found, right under the first title. Try to change the text manually like the below image and it will be more clear. Another thing, for some reason if I use "$oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_RenderWidgetHostHWND", $pConditionDoc)" I can't find the oDocument (both W7 and W10), also tried $UIA_AutomationIdPropertyId, only $UIA_ControlTypePropertyId with $UIA_DocumentControlTypeId worked.

image.png.60044c1f764b9ca0def577af47e6779e.png

Let me show my outputs using your example, but looking for all texts. You will notice that in W7 both texts are found but not in W10. I suspect that you are having the same problem.

W7 output (first 41 Text Elements):

Spoiler

$oUIAutomation OK
$oDesktop OK
--- Find window/control ---
$pCondition0 OK
$oPane1 OK
$pConditionDoc OK
$oDocument OK
--- Find window/control ---
$pCondition1 OK
--- Code Snippets ---
$iLength1 = 1893
--- Code Snippets ---
0$sValue1 = 
1$sValue1 = Create
2$sValue1 = 
3$sValue1 = 
4$sValue1 = 
5$sValue1 = MarvKLM
6$sValue1 = 
7$sValue1 = Browse
8$sValue1 = Forums
9$sValue1 = Downloads
10$sValue1 = Calendar
11$sValue1 = Forum Rules
12$sValue1 = Staff
13$sValue1 = Leaderboard
14$sValue1 = Activity
15$sValue1 = Wiki
16$sValue1 = Bug Tracker
17$sValue1 = AutoIt Resources
18$sValue1 = 
19$sValue1 = FAQ
20$sValue1 = Our Picks
21$sValue1 = 
22$sValue1 = Unread Content
23$sValue1 = Mark site read
24$sValue1 = Home
25$sValue1 = 
26$sValue1 = AutoIt v3
27$sValue1 = AutoIt Help and Support
28$sValue1 = AutoIt General Help and Support
29$sValue1 = FIRST UNIQUE TEXT
30$sValue1 = SECOND UNIQUE TEXT
31$sValue1 = 
32$sValue1 = Add Tag
33$sValue1 = By
34$sValue1 = MarvKLM
35$sValue1 = ,
36$sValue1 = Monday at 10:57 PM
37$sValue1 = in
38$sValue1 = AutoIt General Help and Support
39$sValue1 = 
40$sValue1 = Share
41$sValue1 = 

W10 output (first 101 Text Elements):

Spoiler

$oUIAutomation OK
$oDesktop OK
--- Find window/control ---
$pCondition0 OK
$oPane1 OK
$pConditionDoc OK
$oDocument OK
--- Find window/control ---
$pCondition1 OK
--- Code Snippets ---
$iLength1 = 1512
--- Code Snippets ---
0$sValue1 = 
1$sValue1 = 
2$sValue1 = 
3$sValue1 = 
4$sValue1 = FIRST UNIQUE TEXT
5$sValue1 = By
6$sValue1 = ,
7$sValue1 = Monday at 07:57 PM
8$sValue1 = in
9$sValue1 = 
10$sValue1 = Followers
11$sValue1 = 2
12$sValue1 = Seeker
13$sValue1 = 
14$sValue1 = Members
15$sValue1 = 
16$sValue1 = 4 posts
17$sValue1 = 
18$sValue1 = Posted
19$sValue1 = Monday at 07:57 PM
20$sValue1 = Hi. I can't figure out why the same below example works for fine for me on W7 but it fails to show all texts in W10.
21$sValue1 = 
22$sValue1 = December 1, 2018
23$sValue1 = The GUI looks like shown in the picture: It contains a
24$sValue1 = main menu, a treeview in left pane that lists UI Automation elements, a
25$sValue1 = listview in right pane that displays detail information for the selected element, and a splitterbar to adjust the width of the two panes.   Detect element The "Detect element" main menu is used to detect elements under the mouse with function keys F1 - F4. See How to topics number 2.   Left pane The left pane is a treeview that initial
26$sValue1 = 19
27$sValue1 = 
28$sValue1 = 
29$sValue1 = 
30$sValue1 = 
31$sValue1 = 
32$sValue1 = 
33$sValue1 = I have searched the forum and Google to see if there is something specific to the new W10 build (20H2) but i couldn't find annything. This is the original example i'm using fine in W7:
34$sValue1 = 
35$sValue1 = Reveal hidden contents
36$sValue1 = And then I changed some of the static variables for the W10, but both fails to show all text elements.
37$sValue1 = 
38$sValue1 = Reveal hidden contents
39$sValue1 = Things I've tried: #RequireAdmin | No AV | Exec as Adm | Change Chrome compatibility on W10 |
40$sValue1 = On W7, for example, inspecting the top of this page, Browse shows HyperlinkControl and TextControl:
41$sValue1 = Now on W10, there are some changes. Custom Control changes to Group and no text.
42$sValue1 = *I'm using the Browse link here as an example where it shows two controls in W7, my intention is to find all text (TextControl). Using the above snippet there many other plain texts in W10 missing, that shows on W7. Using UIASpy in Chrome - W10, I can see the TextControl of the "missing" elements but I can't find them using the above FindAll method.
43$sValue1 = Universalist
44$sValue1 = MVPs
45$sValue1 = 
46$sValue1 =
47$sValue1 = 
48$sValue1 = 11
49$sValue1 = 2,673 posts
50$sValue1 = 
51$sValue1 = Posted
52$sValue1 = Tuesday at 02:39 PM
53$sValue1 = Check first within chrome (versions, 32/64 bits)
54$sValue1 = Check chrome://accessibility/ and see the trees as you then should see the same in UIA spy
55$sValue1 = Check with inspect.exe as thats the original MS tool for spying uia
56$sValue1 =
57$sValue1 = 1
58$sValue1 = ,
59$sValue1 = ,
60$sValue1 = The Cool Code Company
61$sValue1 = MVPs
62$sValue1 = 
63$sValue1 =
64$sValue1 = 
65$sValue1 = 26
66$sValue1 = 1,856 posts
67$sValue1 = 
68$sValue1 = Posted
69$sValue1 = Tuesday at 03:47 PM
70$sValue1 = junkew, Have you tried the 3 options for checking things out yourself. In that case, you would have seen that MarvKLM is completely right. The controls are different in Windows 7 and 10. This applies to both UIASpy and Inspect.exe.
71$sValue1 = I've no idea the reason for the differences. I've made a note of the issue and will investigate it further on occasion. But it'll not be right now because I'm working on other projects.
72$sValue1 = ,
73$sValue1 = ,
74$sValue1 = ,
75$sValue1 = ,
76$sValue1 = Compiled code:
77$sValue1 = ,
78$sValue1 = ,
79$sValue1 = Shell menus:
80$sValue1 =
81$sValue1 = ,
82$sValue1 = .
83$sValue1 =   Shell related:
84$sValue1 = ,
85$sValue1 = Graphics related:
86$sValue1 = ,
87$sValue1 = ,
88$sValue1 =
89$sValue1 = ,
90$sValue1 = ListView controls:
91$sValue1 = ,
92$sValue1 = ,
93$sValue1 =
94$sValue1 = ,
95$sValue1 = ,
96$sValue1 = ListView controls:
97$sValue1 =
98$sValue1 = ,
99$sValue1 =
100$sValue1 = ,
101$sValue1 =

The second text is never found in W10 (capped to 101 elements so you can see the difference, but in my tests I looped through all of them). If you can, please try to manually edit the HTML and change to make a text that is unique and then try to loop and see if you can find it. Again, many thanks.

junkew · September 27, 2021

Try with the true condition (as the html is a span element maybe thats why its not in the list as findall default to check for iscontrol).

Otherwise you have to build your own findall based on the rawview treewalker. The information is there otherwise inspect and uia would not see it and all they use are treewalker or findall in the same libraries.

.FindAll( $treescope_subtree, $UIA_oTRUECondition, $pUIElementArray )

junkew · September 27, 2021

I had no AutoIt by hand so here some analysis with Excel VBA.

You seem to be right that FindAll misses some items. It could be you have to change more in the condition given to findall to get more into a rawview finding mode but not sure if thats possible. Findall is based on controlviewwalker.

Easiest would be to write your own recursing findall based on the rawviewwalker see below a VBA example

* open a new vba module

* add references to uiautomationcore

* copy paste below and run test function

* The gCounter should be equal to number of finds with ctrl f on the webpage

Option Explicit
Public c As New CUIAutomation8
Public gCounter As Long

Sub test()
    Dim elDesktop As IUIAutomationElement
    Dim elBrowser As IUIAutomationElement
    
    Dim el As IUIAutomationElement
           
    Set elDesktop = c.GetRootElement
    Debug.Print elDesktop.CurrentClassName
    
    listChilds elDesktop
       
    DoEvents
    Set elBrowser = getMyBrowser(elDesktop)
    Debug.Print elBrowser.CurrentName
    
    Dim elDocument As IUIAutomationElement
    Set elDocument = getMyDocument(elBrowser)
    Debug.Print "Document window: " & elDocument.CurrentName
    
    gCounter = 0
    listMatched elDocument, TreeScope_Subtree
    
    gCounter = 0
    listRecurseWalker elDocument
End Sub
Sub listRecurseWalker(elParent As IUIAutomationElement, Optional scope As TreeScope = TreeScope_Children)
    Dim tw As IUIAutomationTreeWalker
    Dim el As IUIAutomationElement
    
    Set tw = c.RawViewWalker
    
    Set el = tw.GetFirstChildElement(elParent)
    While Not (el Is Nothing)
        If InStr(el.CurrentName, "UI Automation on W10") Then
            gCounter = gCounter + 1
            Debug.Print gCounter & " ; " & el.CurrentName & el.CurrentClassName & el.CurrentControlType
        End If
        listRecurseWalker el
        DoEvents
        Set el = tw.GetNextSiblingElement(el)
    Wend
End Sub
Sub listMatched(elParent As IUIAutomationElement, Optional scope As TreeScope = TreeScope_Children)
    Dim elArr As IUIAutomationElementArray
    Dim oTrueCondition As IUIAutomationCondition
    Dim i As Long
    Dim el As IUIAutomationElement
    
    Set oTrueCondition = c.CreateTrueCondition
        
    Set elArr = elParent.FindAll(scope, oTrueCondition)
    Debug.Print "Iterating over " & elArr.Length; "  items"
    
    For i = 0 To elArr.Length - 1
        Set el = elArr.GetElement(i)
        If InStr(el.CurrentName, "UI Automation on W10 - Get all texts in a Chrome document") > 1 Then
            gCounter = gCounter + 1
            Debug.Print gCounter & " ; "; i & " ; " & el.CurrentControlType & el.CurrentName & " ; " & el.CurrentClassName
        End If
    Next
End Sub
Sub listChilds(elParent As IUIAutomationElement, Optional scope As TreeScope = TreeScope_Children)
    Dim elArr As IUIAutomationElementArray
    Dim oTrueCondition As IUIAutomationCondition
    Dim i As Long
    Dim el As IUIAutomationElement
    
    Set oTrueCondition = c.CreateTrueCondition
        
    Set elArr = elParent.FindAll(scope, oTrueCondition)
    
    For i = 0 To elArr.Length - 1
        Set el = elArr.GetElement(i)
        'Debug.Print i & " ; " & el.CurrentName & " ; " & el.CurrentClassName
    Next
End Sub
Function getMyBrowser(elParent As IUIAutomationElement, Optional scope As TreeScope = TreeScope_Children) As IUIAutomationElement
    Dim cond As IUIAutomationCondition
    Set cond = c.CreatePropertyCondition(UIA_ClassNamePropertyId, "Chrome_WidgetWin_1")
    'Set cond = c.CreatePropertyCondition(UIA_NamePropertyId, "Forums - AutoIt Forums - Google Chrome")
    
    Set getMyBrowser = elParent.FindFirst(scope, cond)
    Debug.Print "First matched: " & getMyBrowser.CurrentName
    Exit Function
End Function
Function getMyDocument(elParent As IUIAutomationElement, Optional scope As TreeScope = TreeScope_Children) As IUIAutomationElement
    Dim cond As IUIAutomationCondition
    Set cond = c.CreatePropertyCondition(UIA_ClassNamePropertyId, "Chrome_RenderWidgetHostHWND")
    'Set cond = c.CreatePropertyCondition(UIA_NamePropertyId, "Forums - AutoIt Forums - Google Chrome")
    Set getMyDocument = elParent.FindFirst(scope, cond)
    'Debug.Print "First matched: " & getMyBrowser.CurrentName
    Exit Function
End Function

junkew · September 27, 2021

Its definitely not a bug as its a span control it completely depends if the aria attributes are set. You can see this also when you check for IsControlElement.
So you should make your own findall based on a rawviewwalker.

https://www.w3.org/TR/html-aam-1.0/

UIA:
- When a labelable element is referenced by a label element's for attribute, or a descendant of a label element, the labelable element's UIA LabeledBy property points to the UIA element for the label element.
- Elements mapped to the Text Control Type are not generally represented as accessible objects in the accessibility tree, but are just part of the Text Control Pattern implemented for the whole HTML document. However, if they have any aria- attributes or an explicit tabindex specified, elements mapped to the Text Control Type will be represented as accessible objects in the accessibility tree.

MarvKLM · September 27, 2021

Hi @junkew thank for confirming my suspicious about FindAll. I changed my approach to TreeWalker to find all elements. There are some considerations that you might help me to understand. First the TreeWalker code (from @LarsJ) I'm using:

Spoiler

#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

Opt( "MustDeclareVars", 1 )

#include "UIA_Constants.au3"

; Array index offset relative to UIA_ControlTypeIds = -50000
Global Const $aUIControls = [ _
  "Button",       "Calendar",     "CheckBox",     "ComboBox",     "Edit",         "Hyperlink",    "Image",        "ListItem",     "List",         "Menu", _
  "MenuBar",      "MenuItem",     "ProgressBar",  "RadioButton",  "ScrollBar",    "Slider",       "Spinner",      "StatusBar",    "Tab",          "TabItem", _
  "Text",         "ToolBar",      "ToolTip",      "Tree",         "TreeItem",     "Custom",       "Group",        "Thumb",        "DataGrid",     "DataItem", _
  "Document",     "SplitButton",  "Window",       "Pane",         "Header",       "HeaderItem",   "Table",        "TitleBar",     "Separator",    "SemanticZoom", _
  "AppBar" ]

Global $oUIAutomation, $sTemp

Example2()

Func Example1()
  ; Create UI Automation object
  $oUIAutomation = ObjCreateInterface( $sCLSID_CUIAutomation, $sIID_IUIAutomation, $dtag_IUIAutomation )
  If Not IsObj( $oUIAutomation ) Then Return ConsoleWrite( "$oUIAutomation ERR" & @CRLF )
  ConsoleWrite( "$oUIAutomation OK" & @CRLF )

  ; Get Desktop element
  Local $pDesktop, $oDesktop
  $oUIAutomation.GetRootElement( $pDesktop )
  $oDesktop = ObjCreateInterface( $pDesktop, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oDesktop ) Then Return ConsoleWrite( "$oDesktop ERR" & @CRLF )
  ConsoleWrite( "$oDesktop OK" & @CRLF )

  ; Chrome condition
  Local $pCondition0
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_WidgetWin_1", $pCondition0 )
  If Not $pCondition0 Then Return ConsoleWrite( "$pCondition0 ERR" & @CRLF )
  ConsoleWrite( "$pCondition0 OK" & @CRLF )

  ; Find pane control
  Local $pPane1, $oPane1
  $oDesktop.FindFirst( $TreeScope_Children, $pCondition0, $pPane1 )
  $oPane1 = ObjCreateInterface( $pPane1, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oPane1 ) Then Return ConsoleWrite( "$oPane1 ERR" & @CRLF )
  ConsoleWrite( "$oPane1 OK" & @CRLF & @CRLF )
  
  Local $pConditionDoc
;~   $oUIAutomation.CreatePropertyCondition( $UIA_ControlTypePropertyId, $UIA_DocumentControlTypeId, $pConditionDoc )
  $oUIAutomation.CreatePropertyCondition( $UIA_ClassNamePropertyId, "Chrome_RenderWidgetHostHWND", $pConditionDoc)
  If Not $pConditionDoc Then Return ConsoleWrite( "$pCondition0 ERR" & @CRLF )
 ConsoleWrite( "$pCondition0 OK" & @CRLF )

  Local $pDocument, $oDocument
  $oPane1.FindFirst( $TreeScope_Descendants, $pConditionDoc, $pDocument )
  $oDocument = ObjCreateInterface( $pDocument, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  If Not IsObj( $oDocument ) Then Return ConsoleWrite( "$oDocument ERR" & @CRLF )
  ConsoleWrite( "$oDocument OK" & @CRLF )

  ; List all automation elements of a window
  ; in a hierarchical structure like a treeview.
  ListDescendants( $oDocument )
EndFunc

; List all child elements of parent
Func ListDescendants( $oParent, $iLevels = 0, $iLevel = 0 )
  If Not IsObj( $oParent ) Then Return
  If $iLevels And $iLevel = $iLevels Then Return

  ; Create RawViewWalker object
  Local $pRawViewWalker, $oRawViewWalker
  $oUIAutomation.RawViewWalker( $pRawViewWalker )
  $oRawViewWalker = ObjCreateInterface( $pRawViewWalker, $sIID_IUIAutomationTreeWalker, $dtag_IUIAutomationTreeWalker )
  If Not IsObj( $oRawViewWalker ) Then Return ConsoleWrite( "$oRawViewWalker ERR" & @CRLF )

  ; Get first child element
  Local $pUIElement, $oUIElement
  $oRawViewWalker.GetFirstChildElement( $oParent, $pUIElement )
  $oUIElement = ObjCreateInterface( $pUIElement, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )

  Local $iControl, $sElement
  While IsObj( $oUIElement )
    $oUIElement.GetCurrentPropertyValue( $UIA_ControlTypePropertyId, $iControl )
    $oUIElement.GetCurrentPropertyValue( $UIA_NamePropertyId, $sElement )

    If $aUIControls[$iControl-50000] = "Text" Then
        ConsoleWrite($sElement & @CRLF )
    EndIf

    ListDescendants( $oUIElement, $iLevels, $iLevel + 1 )

    $oRawViewWalker.GetNextSiblingElement( $oUIElement, $pUIElement )
    $oUIElement = ObjCreateInterface( $pUIElement, $sIID_IUIAutomationElement, $dtag_IUIAutomationElement )
  WEnd
EndFunc

1 - Consideration on Pane and Document:

W7 - FindAll and TreeWalker both works to find all elements using Pane or Document, results are the same when retrieving Document elements.
W10 - FindAll works with Pane and Document but fails to find all elements (because of the aria attributes?). TreeWalker only works with Document, if you use Pane the elements in Document are not retrieved (not sure if this should be the correct method, where Pane only shows PaneElements, but in this case Document is also a child of Pane).

2 - Consideration about the CreatePropertyCondition to find the Document:

$UIA_ClassNamePropertyId - Chrome_RenderWidgetHostHWND - using these properties to find the Document (both in W7 Chrome and W10 Chrome) will fail if the Document is not on focus.
$UIA_ControlTypePropertyId - $UIA_DocumentControlTypeId - using these properties to find the Document (both in W7 Chrome and W10 Edge) works without the Document being on focus, but this fails on Chrome without focus.

I could not find the reason that Document object fails on W10 Chrome if it's not on focus.

Using TreeWalker I was able to find the text elements but you will see that in W10, Chrome and Edge have some interesting differences:

W7 output:

Spoiler

$oUIAutomation OK
$oDesktop OK
$pCondition0 OK
$oPane1 OK

Existing user? Sign In

Sign Up
Browse
Forums
Downloads
Calendar
Forum Rules
Wiki
AutoIt Resources

FAQ
Our Picks

All Activity
Home

AutoIt v3
AutoIt Help and Support
AutoIt General Help and Support
FIRST UNIQUE TEXT
SECOND UNIQUE TEXT
By
MarvKLM
,
September 20
in
AutoIt General Help and Support

Share
Followers
2
MarvKLM
Seeker

Members

0
5 posts


W10 Chrome output:

Spoiler





FIRST UNIQUE TEXT
SECOND UNIQUE TEXT

By
,
September 20
in

Followers
2
MarvKLM
Seeker

Members

5 posts

Posted
September 20

Hi. I can't figure out why the same below example works for fine for me on W7 but it fails to show all texts in W10.


December 1, 2018
The GUI looks like shown in the picture: It contains a
main menu, a treeview in left pane that lists UI Automation elements, a
listview in right pane that displays detail information for the selected element, and a splitterbar to adjust the width of the two panes. Detect element The "Detect element" main menu is used to detect elements under the mouse with function keys F1 - F4. See How to topics number 2. Left pane The left pane is a treeview that initial
19







W10 Edge output:

Spoiler

Existing user? Sign In

Sign Up
Browse
Forums
Downloads
Calendar
Forum Rules
Wiki
AutoIt Resources

FAQ
Our Picks

All Activity
Home

AutoIt v3
AutoIt Help and Support
AutoIt General Help and Support
FIRST UNIQUE TEXT
AliExpress agora no Brasil
Venha vender com uma das marcas mais confiáveis de e-commerce internacional no Brasil-2020
AliExpress
Abrir
SECOND UNIQUE TEXT
By
MarvKLM
,
09/20/2021 07:57 PM
September 20
in
AutoIt General Help and Support

Share
Followers
2
MarvKLM
MarvKLM

As you can see TreeWalker in W10 Edge shows similar results to W7 Chrome.

junkew · September 27, 2021

When you change your unique text from <span> to <li> you will see its seen by findall

Different operating system = different tree
Different browsers = different tree
Different browser = different versions of chromium

In general different versions lead to different trees which you should test properly what your objective is.

If you just want to get the innerText or innerHTML send below into the addressbar with sendkeys and followed by a return.
Would then be easy to get from the popup

javascript:alert(document.body.innerText);void(0);
javascript:alert(document.body.innerHTML);void(0);

above you also can do less visible by adding a textbox of size 1x1 to the webpage and then getyour textbox with regular uia functions

javascript:{const input = document.createElement("input");input.setAttribute("type", "text");document.body.appendChild(input);input.value = document.body.innerText;void(0);}

UI Automation on W10 - Get all texts in a Chrome document

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members