AutoIt Dictation!

[cdkid]

It uses the microsoft speech recognition SDK which can be downloaded

http://download.microsoft.com/download/spe...speechsdk51.exe <--- there

If it isnt already trained then train it and start this

Well, here it is, not the best but i thought it was fun

expandcollapse popup

#cs
Commands:
Question mark
        Sends a question mark
        Example: "Hello Question Mark"
New Paragraph
        sends ENTER - TAB
Period
        Starts a new sentence
Quote
        Sends a quotation mark
Delete That
        Deletes the last message (Saves the last 11 messages)
Quit
        Shuts down Scribe
Space
        Sends a space
BackSpace
        Sends a backspace
Comma
        Sends a comma
Note: Some of these will probably only work if they are alone in a command so
"Hello new paragraph" is not the same as "hello" "new paragraph", i belive period, comma, quote, and question mark will work in with other words.
#ce
Global $recog = "";SET GLOBAL
Global $buffer[12]
global $cmds[10], $do, $i, $nf
$cmds[0] = "quit"
$cmds[2] = "backspace"
$cmds[4] = "delete that"
$cmds[5] = "comma"
$cmds[6] = "new paragraph"
$cmds[7] = "quote"
$cmds[8] = "space"
$cmds[9] = "period"
$do = 1
$z = 1
$nf = 0
$RecoContext=ObjCreate("SAPI.SpSharedRecoContext")
if @error then
    Msgbox(0,"","ERROR")
    exit
endif
$SinkObject=ObjEvent($RecoContext,"MYEvent_")
  $SPRS_INACTIVE    = 0
  $SPRS_ACTIVE  = 1
  $SGDSActive=$SPRS_ACTIVE
  $SGDSInactive=$SPRS_INACTIVE

  $Grammar = $RecoContext.CreateGrammar(1)
  $Grammar.Dictationload
  $Grammar.DictationSetState($SGDSActive);LISTEN
while 1
    
    Sleep(100)
if $recog <> "" Then
    for $i = 0 to ubound($cmds, 1) - 1
        if $recog = $cmds[$i] OR stringleft($recog, 10) = "backspace " Then
            $do = 0
        EndIf
    Next
    if $do = 1 Then
        if $nf = 0 Then
            send($recog)
            if $z = 10 then
                $z = 0
            EndIf
                $z = $z + 1
            $buffer[$z] = $recog
            $nf = 1
        Else
        send("{SPACE}" & $recog)
        if $z = 10 Then
            $z = 0
        EndIf
    $z = $z + 1
    $buffer[$z] = " " & $recog
EndIf
    EndIf
Select
case stringleft($recog, 10) = "backspace "
    $recog = stringreplace($recog, "one","1")
    $recog = stringreplace($recog, "to", "2")
    $recog = stringreplace($recog, "two", "2")
    $recog = stringreplace($recog, "three", "3")
    $recog = stringreplace($recog, "for", "4")
    $recog = stringreplace($recog, "four", "4")
    $recog = stringreplace($recog, "five", "5")
    $recog = stringreplace($recog, "six", "6")
    $recog = stringreplace($recog, "seven", "7")
    $recog = stringreplace($recog, "ate", "8")
    $recog = stringreplace($recog, "eight", "8")
    $recog = stringreplace($recog, "nine", "9")
    $recog = stringreplace($recog, "backspace ", "")
                $recog = stringreplace($recog, " ", "")
    send("{BS " & $recog & "}")
case $recog = "period"
    send(".")
    if $z = 10 Then
        $z = 0
    EndIf
        $z = $z + 1
    $buffer[$z] = "."
case $recog = "space"
    send("{SPACE}")
    if $z = 10 Then
        $z = 0
    EndIf
    $z = $z + 1
    $buffer[$z] = " "
case $recog = "new paragraph"
    send("{ENTER}")
    send("{TAB}")
    if $z = 10 Then
        $z = 0
    EndIf
    $z = $z + 1
    $buffer[$z] = "  "
case $recog = "delete that"
    if $z = 0 Then $z = 10
    $l = StringLen($buffer[$z])
    $buffer[$z] = ""
    $z = $z - 1
    send("{backspace " & $l & "}")
case $recog = "backspace"
    send ("{BACKSPACE}")
Case $recog = "quit"
    exit;HEAR EXIT
EndSelect
;_talkOBJ($recog, 3); TALKS AFTER IT HEARS SOMETHING, The mic hears the pc and affects the recognition
    _talkOBJ($recog, 3, "dont talk"); JUST POP-UPt
    $recog = "";SET TO NULL FOR REPEATED COMMANDS
    $do = 1;So it will continue typing after a command
EndIf
WEnd
;$Grammar.DictationSetState($SGDSInactive);STOP LITENING
  

Func MYEvent_Recognition($StreamNumber,$StreamPosition,$RecognitionType,$Result)
          $recog = $Result.PhraseInfo.GetText;SET $recog VAR
EndFunc
Func _TalkOBJ($s_text, $s_voice = 3, $s_dont = "")
Local $quite = 0
    Local $o_speech = ObjCreate ("SAPI.SpVoice")
    Select
        Case $s_voice == 1
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Mary", "Language=409").Item(0)
            TrayTip("Female Reader",$s_text,1)
        Case $s_voice == 2
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Mike", "Language=409").Item(0)
            TrayTip("Male Reader",$s_text,1)
        Case $s_voice == 3
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Sam", "Language=409").Item(0)
            TrayTip("OldMan Reader",$s_text,1)
    EndSelect
if $s_dont <> "dont talk" then
    $o_speech.Speak ($s_text)
    $o_speech = ""
ENDif
    Sleep(1000)
    TrayTip("","",1)
EndFunc;==>_TalkOBJ

Tell me what'cha think

~cdkid

Edited February 28, 2006 by cdkid

[ConsultingJoe]

Hey nice idea. Just one question, do you have the same problem as I do with the script, it just stops listening after about a minute? I can't figure it out. The project I am working on is a voice commander program, it should be nice this is what I have so far:

JUST THE UNFINISHED GUI

CODE

; ----------------------------------------------------------------------------

;

; AutoIt Version: 3.1.1.109 (beta)

; Author: zerocool60544 <jsammarco@gmail.com>

;

; Script Function:

;

;

; ----------------------------------------------------------------------------

;

$hwnd = GUICreate ( "Voice Commander", 640, 480 )

#include "GUIConstants.au3"

$treeview=GUICtrlCreateTreeView( 10, 10, 200 , 460, BitOr($TVS_HASBUTTONS, $TVS_HASLINES, $TVS_LINESATROOT, $TVS_DISABLEDRAGDROP, $TVS_SHOWSELALWAYS), $WS_EX_CLIENTEDGE)

$generalitem = GUICtrlCreateTreeViewitem("General", $treeview)

$displayitem = GUICtrlCreateTreeViewitem("Display", $treeview)

$aboutitem = GUICtrlCreateTreeViewitem("About", $generalitem)

$compitem = GUICtrlCreateTreeViewitem("Computer", $generalitem)

$useritem = GUICtrlCreateTreeViewitem("User", $generalitem)

$resitem = GUICtrlCreateTreeViewitem("Resolution", $displayitem)

$otheritem = GUICtrlCreateTreeViewitem("Other", $displayitem)

GUICtrlCreateGroup ("Initiate Command", 220, 400, 410, 70)

$initcheckbox = GUICtrlCreateCheckbox ( "word to listen for before hearing commands:", 240, 430, 220, 22)

$initcommand = GUICtrlCreateInput ( "Computer", 480, 430 , 130)

$buttonadd = GUICtrlCreateButton ( "Add", 230, 320, 110)

$buttondel = GUICtrlCreateButton ( "Delete", 370, 320, 110)

$buttonsave = GUICtrlCreateButton ( "Save", 510, 320, 110)

$buttonlisten = GUICtrlCreateButton ( "Start Listening", 370, 370, 110)

$buttonSR = GUICtrlCreateButton ( "Speech Recognition", 510, 370, 110)

GUICtrlCreateGroup ("Edit Command", 220, 10, 410, 300)

$namelabel = GUICtrlCreateLabel ( "Command Name:", 230, 50, 120)

$commandname = GUICtrlCreateInput ( "", 320, 45, 90)

$commandlabel = GUICtrlCreateLabel ( "Command Word:", 440, 50, 120)

$commandword = GUICtrlCreateInput ( "", 530, 45, 90)

$commandtype = GUICtrlCreateList ( "", 230, 80, 100, 120 )

GUICtrlSetData($commandtype,"Run Program|Run Command|Play Media|Close Window|Shutdown|Send Keys", "Run Program")

Global $temp1,$temp2,$temp3,$temp4,$temp5,$temp6,$temp7, $msg

;DllCall("user32.dll", "int", "AnimateWindow", "hwnd", $hwnd, "int", 2000, "long", 0x00040010);explode

GUISetState ()

$lasttype = ""

While 1

$msg = GUIGetMsg()

if $msg = $GUI_EVENT_CLOSE Then ExitLoop

if GUICtrlRead ( $commandtype ) <> $lasttype Then

Select

Case GUICtrlRead ( $commandtype ) = "Close Window"

$lasttype = "Close Window"

deltempctrl()

$temp1 = GUICtrlCreateInput ( "Program Manager", 340, 120, 270)

Case GUICtrlRead ( $commandtype ) = "Run Command"

$lasttype = "Run Command"

deltempctrl()

$temp1 = GUICtrlCreateInput ( "msgbox(0,'hello','Hi')", 340, 120, 270)

Case GUICtrlRead ( $commandtype ) = "Run Program"

$lasttype = "Run Program"

deltempctrl()

$temp1 = GUICtrlCreateButton ( "Browse", 350, 120, 80)

$temp2 = GUICtrlCreateInput ( "", 440, 120, 170)

Case GUICtrlRead ( $commandtype ) = "Send Keys"

$lasttype = "Send Keys"

deltempctrl()

$temp1 = GUICtrlCreateInput ( "", 340, 120, 270)

$temp2 = GUICtrlCreateLabel ( "Key list" & @CRLF & "{RCTRL}", 340, 230, 230)

Case GUICtrlRead ( $commandtype ) = "Shutdown"

$lasttype = "Shutdown"

deltempctrl()

Case GUICtrlRead ( $commandtype ) = "Play Media"

$lasttype = "Play Media"

deltempctrl()

EndSelect

EndIf

gettempgui()

WEnd

Func gettempgui()

Select

Case $lasttype = "Close Window"

$window = GUICtrlRead ( $temp1 )

Case $lasttype = "Run Command"

$command = GUICtrlRead ( $temp1 )

Case $lasttype = "Run Program"

if $msg = $temp1 then

$program = FileOpenDialog ( "Select Program", @ScriptDir, "Programs (*.exe;*.bat)", 1 )

If @error Then

MsgBox(4096,"","No File(s) chosen")

Else

;$var = StringReplace($var, "|", @CRLF)

GUICtrlSetData ( $temp2, $program )

EndIf

EndIf

Case $lasttype = "Send Keys"

Case $lasttype = "Shutdown"

Case $lasttype = "Play Media"

EndSelect

EndFunc

Func deltempctrl()

GUICtrlDelete($temp1)

GUICtrlDelete($temp2)

GUICtrlDelete($temp3)

GUICtrlDelete($temp4)

GUICtrlDelete($temp5)

GUICtrlDelete($temp6)

GUICtrlDelete($temp7)

EndFunc

Edited February 28, 2006 by zerocool60544

[cdkid]

Hmm, no i haven't had that problem, but i just thought i'd let everyone know, i updated with BACKSPACE <number>, so for backspace 25 say

"backspace two five"

**edit**

hmm, i have had taht problem a few times now, but i just restart it and it works fine...

***edit2**

Could some sort of recursion limit be being reached with the While 1....WEnd loop?

Thus causing it to ignore everything?

Edited February 28, 2006 by cdkid

[ConsultingJoe]

I don't know why it just stops listening, I tried a lot of different things, this script all the commands are in the recog func, You can change the voices by saying their names

expandcollapse popup

$RecoContext=ObjCreate("SAPI.SpSharedRecoContext")
if @error then
    Msgbox(0,"","Error opening $RecoContext: " & @error)
    exit
endif
$SinkObject=ObjEvent($RecoContext,"MYEvent_")
  $SPRS_INACTIVE    = 0
  $SPRS_ACTIVE  = 1
  $SGDSActive=$SPRS_ACTIVE
  $SGDSInactive=$SPRS_INACTIVE
  $Grammar = $RecoContext.CreateGrammar(1)
  $Grammar.Dictationload
  $Grammar.DictationSetState($SGDSActive)
    Global $recog, $s_voice = 3
While 1
Sleep(1000)

WEnd

Func MYEvent_Recognition($StreamNumber,$StreamPosition,$RecognitionType,$Result)
    $recog = $Result.PhraseInfo.GetText
    Select
    Case $Result.PhraseInfo.GetText = "exit"
        exit
    Case $Result.PhraseInfo.GetText = "Mary"
                $s_voice = 1
        _TalkOBJ("Hello, Mary here", $s_voice)
    Case $Result.PhraseInfo.GetText = "Mike"
                $s_voice = 2
        _TalkOBJ("Hello, Mike here", $s_voice)
    Case $Result.PhraseInfo.GetText = "Sam"
                $s_voice = 3
        _TalkOBJ("Hello, Sam here", $s_voice)
    Case else 
            _TalkOBJ($Result.PhraseInfo.GetText, $s_voice)
    EndSelect
  EndFunc
  
Func _TalkOBJ($s_text, $s_voice = 3)
          $Grammar.DictationSetState($SGDSInactive)
Local $quite = 0
    Local $o_speech = ObjCreate ("SAPI.SpVoice")
    Select
        Case $s_voice == 0
            Return
        Case $s_voice == 1
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Mary", "Language=409").Item(0)
            TrayTip("MARY",$s_text,1)
        Case $s_voice == 2
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Mike", "Language=409").Item(0)
            TrayTip("MIKE",$s_text,1)
        Case $s_voice == 3
            $o_speech.Voice = $o_speech.GetVoices("Name=Microsoft Sam", "Language=409").Item(0)
            TrayTip("SAM",$s_text,1)
    EndSelect
    $o_speech.Speak ($s_text)
    $o_speech = ""
    Sleep(1000)
    TrayTip("","",1)
          $Grammar.DictationSetState($SGDSActive)
EndFunc ;==>_TalkOBJ